Stopping at MP4s to last image PD?

Similar Questions

• Videos without stopping on the last image

  I created a folio containing a video. This video needs to stop on the last image, while it is not reset iteself. in the control panel overlays folio I selected the stop"button on the last image. But previews and when the folio is updated, video seems to ignore that and play through and restores at the beginning. Please help, I absolutely need to have the judgment of the video on the last image.

  You have probably created a folio v20. Stop at the last frame was introduced in v22 or v23. Folio properties allows you to update your version of the Viewer, and then try again. (Of course, if you have an older application on the App Store, you'll want to consider.)

• Stop on the last image: Video Glitch

  I think that I just discovered a small problem with the help of Stop on the last image for videos. I have the video 1024 x 768 auto parts and together the current image and stop on the last image. The video plays well and stops on the last image, but if you drag down the article we also have integrated video. Once you play the other video and if you scan back up on the first page, you will find the full video frame is recessed it starts setting. I should also mention that I have tested with a link to a video in a URL and if you play the video in the browser it has the same effect. Essentially, it restores your last image in the current image. Does anyone else have this experience or have a work-around to prevent it?

  We have also tried to put a State of the object that would show the last image once the finished video playing, but this disables the ability to exploit and shoot to the top of the Chrome.Thanks!

  The last frame of the video is sure to remain visible while the player is on this page. Once a player has moved away from the page that it can reset as we do memory management, etc. and clean the former State.

  Neil

• AutoPlay and if stop at the last image does not not on android Tablet

  I'm trying to use folio Builder to make a portfolio for my work and post it on my Nexus 7 Andorid tablet.  The opening page is a video that should stop on the last image.  After reading many articles, it seems that only iOS is able to use these features, and it won't work on android.  Are there workarounds?

  In early February, we will have our new native Viewer available in large pre-release Android, and you will be able to compile a version using this new application that supports the stop on the last image. Until then, no, there is no work around.

  Neil

• VIDEO WITHOUT STOPPING ON THE LAST IMAGE

  Help!  I ticked the box in Folio Builder v26 - "stop on the last image" - but when I saw in Adobe Content Viewer, after playing the video, it is up to the poster frame - which is the first image of my video.  This won't work for what I'm doing at all.

  Can anyone help?

  Thank you!

  Kathie

  When you are previewing are previewing on your desktop or on an iPad?  Stop at the last frame is available through iOS so it does not work on your desk.  But if you have your iPad plugged in to your computer and open it from the ACV on your iPad then you should be able to preview on the device and it should work.  But as I said, this will work only on iOS.

• Game stop on the last image appears lighter than the last image

  I have a video game to "stop on the last image" by using the technique described here:

  OAR-here http://digitalpublishing.tumblr.com/post/6141054971/How-to-Make-a-Video-stop-at-the-Last-f

  Works very well. But whenever I do that, there is a slight darkening when the multi-state object appears at the end. To create the image of the multi-state objects, I opened the video in Photoshop, caught the last image and saved as a JPEG file.

  Anyone have any ideas? I tried to save the image as a PNG, much other workaround solutions, but the problem persists. I've noticed this in other publications that I downloaded also, so I think that the problem is widespread.

  I found an answer to this problem. I wrote the answer in a post to blog here:

  http://blog.gilbertconsulting.com/2011/09/DPS-stop-video-at-last-frame.html

• Why the last image of the exported image sequence is sometimes black?

  I get sequences of images in Photoshop and then exporting them to a file mp4 video.  For some reason, Photoshop sometimes decides to put a black frame at the end of the video, no matter what I try settings.  Sometimes it leaves aside the black frame.  I can't understand why he did this.  If anyone knows how to get rid of this?  When I import the resulting sequences first, I need to change all the frames of black.  Not impossible to deal with, but it is kind of a pain.

  Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 10, Stepping: 0 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Physical processor count: 6

  Processor speed: 3200 MHz

  Built-in memory: 8191 MB

  Free memory: 4507 MB

  Memory available to Photoshop: 7154 MB

  Memory used by Photoshop: 70%

  Graphics card: NVIDIA GeForce GTX 470 (with the latest driver Version 347.88)

  Adobe Bridge 6.1.0.116 x 64

  Use, file-> open and checking the box 'Sequence of Image', I am loading a sequence of JPGs I've cropped in Photoshop (using a script to automate this process), and I specify 23.976 fps. I checked all the JPG files, and they are OK. I play the animation in Photoshop, and it looks good.  I then export the movie using the file-> export-> made video, I use Adobe Media Encoder, h.264 format, high quality, 1920 x 1080 (the original document size), 23.976 fps.  It automatically selects the zone selection to export work.  That seems correct.  In a sequence of images of N, it is said that it will export images 0 to N-1, which I think is OK if it indexes starting at 0 and not 1.  I tried to export (frames) checked, and the result is the same.  The last image is black.  I also tried to change the work area to remove the last image and the last frame of the rendered video is so dark, but the last image of the sequence, I opened is missing.  I checked the image sequence that was exported with the area of complete work (or frameworks) selected and all managers are there - with just a framework black, added at the end, which is certainly not in the work area.

  No error message.

  I checked the help, also I tried searching the forums, but I don't know what I'm doing wrong.

  The problem has been around on and off for a few years.  He had disappeared with CC, but now he's back, even though I'm not aware of what I'm doing differently.

• If you create an animation you can loop the last images of this animation if a key is held down?

  OK let's create you a button which, when he is pressed to play an animation of 20 frames realsed if he goes to the framework one and stops when he plays on this animation. in the section allows you to have an animation of fire and you want the home to apear and unless the user sound to the bottom of the animation has reached the end of the time line and loops back and he played the last 5 frames of animation, and once it is loose, it will to and stops at the framework one. Well, I know how to make a button that pressed once play an animation. And I know how to say what is released to and stops to frame a. What I do not know how to do is a loop of the fire on the last images of 5 or 6 so that the user can hold down throughout the day and unfold this animation. Thank you for any wait you may have.

  Just put an order in the last frame to gotoAndPlay (#), where # is some number of frame is 5 or 6 frames at the end

• Video end with the last image

  Hello

  I was wondering how you can end your video with the last image instead of turning to black.

  When I play my video in VLC Player after them have been exported, the video is always seems to go dark at the end instead of just stopping at the last image.

  Thank you!

  The drive works as expected.

  He plays the latest framework that is part of your video.

  When there is no more than the video to play it stops, the image turns black.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• iTunes does not stop after playing the last song on the playlist

  It was that iTunes has stopped playing after the last song in a playlist.

  I really liked it.

  Now, he travels the playlist, starting with the first song, after the last song is played.

  How can I disable this sort of iTunes for the iPhone goes back to stop playing after the last song?

  I can't see any preferences panel.

  You must disable the repetition. The only place to do it is on the "Now Playing" screen (view great work of the song).  Downstairs there are two arrows of recirculation, tap those until their origin is so more gray... he alternates song to repeat, repeat list, OFF.  Certainly, it is a horrible UI decision...

• a table of images only the last image shows the index

  Hello world

  I try to index a table of images and all, but the last item gives me the error: "not an image."

  Here is a picture of the vi. The first loop load images and stores them in an indexed auto tunnel. Each diagnosis that I fell on this loop showed that all is well. The second loop must display the image stored in the tunnel sequence indexed auto, but it does not work. Instead, I got the error message that the 0 to n - 1 elements are not images, and only the last image is displayed.

  

  What I am doing wrong?

  Thanks for your help.

  and vi:

  Hello

  This VI has worked well for me with a contribution of 5 bmp files. You can check your input files?

• Camera: Find the last image?

  Hello

  Are there examples of how to find the last image taken after invoking the camera?

  Thank you

  Hi and welcome to the forums!

  If you take the picture and save, and can't find it? Or you take pictures

  Return to the back and you want to know where they are stored as you pull?

  Go to the media and click the photos, as soon as the images are displayed

  Highlight it, click menu, properties. It will show you, device, media and file

  and size.

  You can set the previous directory. Unit > menu button > options.

  Here you can set options for the camera with flash, color, size, and storage in the

  media folders,

  Thank you

  Bifocals

• Load swf to the last image

  Hello

  I have several files SWF is meant to be read in order (like a book). I can load the previous swf file, but I need to go to the last image. Is this possible with the code that I have?

  lastPage2.addEventListener (MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_1);

  Import fl.display.ProLoader;

  var fl_ProLoader_1: ProLoader;

  var fl_ToLoad_1:Boolean = true;

  function fl_ClickToLoadUnloadSWF_1(event:MouseEvent):void

  {

  If (fl_ToLoad_1)

  {

  fl_ProLoader_1 = new ProLoader();

  fl_ProLoader_1.load (new URLRequest ("CEAS_I_1_16.swf"));

  addChild (fl_ProLoader_1);

  }

  on the other

  {

  fl_ProLoader_1.Unload ();

  removeChild (fl_ProLoader_1);

  fl_ProLoader_1 = null;

  }

  fl_ToLoad_3 =! fl_ToLoad_1;

  }

  It doesn't work at all, but I could find another code that you suggested on another thread: go to a specific external swf image

  It worked!

  var loadmod2:Loader;

  lastSection.addEventListener (MouseEvent.CLICK, loadlast);

  function loadlast(e:MouseEvent):void

  {

  {if(!loadmod2)}

  loadmod2 = new Loader();

  loadmod2.contentLoaderInfo.addEventListener (Event.Complete, loadCompleteF);

  }

  loadmod2. Load (new URLRequest ("CEAS_I_1_16.swf"));

  }

  function loadCompleteF(e:Event):void {}

  addChild (loadmod2);

  MovieClip (loadmod2.content), .gotoAndPlay (33);

  }

• after effects composition - right side Cup - last image in first

  I have an osx mavericks 10.9.5 project - creative suite monthly cs6 - body (later before the upgrade to yosemite)

  at the end of the project-, I have a composition effects. It is fine until the last image - where the far right 1/8 or more are cut off the slide. (see image below). The framework before the end? perfect. The last image - cut.
  
  If I extend the ae composition a longer picture - the same problem occurs (the second to last image is perfect, the last image is cut off). same thing with making it 1 more short frame.

  I have never seen anything like it.

  When I check my effects controls - I have nothing assets (no opacity, no 'culture', etc)-my width/height are all exactly the same in both frames.

  Any ideas?

  Hi Teloscientist,

  It's the end of the flag sequence. Expected behavior. It does not show on your exports, so don't worry. In Premiere Pro 20141, you can disable it.

  Thank you
  Kevin