Stops playback in CS5

Similar Questions

• Media center stopped playback recorded movies

  Media center stopped playback recorded movies

  Hello, boy H

  We need more information, on the right, click on the event and select copy > copy the information in the form of text, then paste it here.

  This has started recently or has it been the ongoing problem?

  If the latter, try to perform a restore of the system when he worked: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 12 will stop playback automatically at the launch of compatible webcam app or video game

  It seems to be a logic in WMP 12 which automatically stops playback of video or music when another process wants to play another video or audio stream. Music playback stops when I run a video game, and a lot more annoyingly, it stops whenever I have a video stream that is played in Flash Player in my browser. I can't find the relevant controls in the options of WMP.

  Is this really a WMP feature that cannot be disabled?

  I use AMD / ATI drivers with transcoding video installed, can it be a cause?

  Hi Lucas,.

  You can try changing the settings in exclusive Mode:

  1. Right click on the speaker icon in the notification bar.
  2. Select the playback device
  3. Select your device and click Properties
  4. Select the Advanced tab
  5. Deselect the options in exclusive Mode
  6. Click apply
  7. Click OK

  Let us know if that helps.

• First CS5.01 stop playback... Why?

  Hello

  I looked in the forums to search first, but could not find my problem solved unfortunately:

  I change 5 d on CS5.01 first.

  QuadCore 64 bit Win 7 Ultimate 8 GB RAM, HDD of the 2 x 2 TB extra, Blackmagic Decklink Extreme 3D

  
  I could modify and read, but which continues to se more is:

  I play the timeline, and it stops just when cut from one clip to another.

  If I hit play again he goes once again to a clip or two or three, and then it stops again at the cup of a clip

  (actually if I come back in the timeline it seems to keep reading until a clip does not play, then it stops again...)

  I checked the audio, but I can't change ASIO if Blackmagic Audio standard.

  I tried "Premiere Pro WDM sound" rather as a 32-bit standard and checked on the inputs and outputs, but that has done nothing...

  
  It's really frustrating. Any ideas?

  Thank you!!

  Christian

  What graphics card you are using for first Pro CS5?

  Check your graphics card driver.

  Also check your Blackmagic Decklink Extreme driver 3D.
  Blackmagic Decklink are a few problems with Adobe CS5, update the drivers.

  You can do one thing more you can low res reading. (New in CS5)

  Maybe you'll be able to do a job now.

  Thank you

• Stop playback for crossfade transitions

  CS5 is usually solid as a rock, and the mercury playback engine works great (have a 285GTX), the problem I have is when I put in a cross fader (or any dissolution) the audio continues to play, but video stutters and then stops.  The CPU usage is not change, so it doesn't push the CPUs, and I tried not less demanding 720 projects p in cs4 that had no problem reading in real-time, and they fail every time that they hit a dissolution (be it a hardware or software rendering dissolve.)  I tried with or without reading of mercury and it has the same problem.

  Does anyone else have this problem?  Any help would be great.  Thank you

  Yep, this bug is connected. I think it's that I mentioned would be set "in a future update."

  I thought that maybe the same goes when I read this post.

  the_wine_snob wrote:

  Seems that, in a previous thread, or two, Jeremy has confirmed that there is a Bug in the Transitions in AVCHD. Don't remember the details, but I think that Adobe has been at work on obtaining a hotfix. Perhaps a search of this forum on the 'Transitions + AVCHD' and maybe the filter on people > Jeremy. I also think that I commented in at least one of these threads.

  Hunt

• HOW TO STOP Adobe Bridge CS5 - Photo Downloader to start

  Everytieme I synchronize a phone or a camera on my computer Windows 7... Adobe Bridge CS5 Photo Downloader keeps popping up.  I looked under EDITION, then Preferences and then find a way to stop this.  I almost want to uninstall the entire program.

  Help, please!

  It is a function of the operating system.

  Look in the options for AutoPlay for a 'status quo' when this application is connected.

• Need stop playback of a component FLVPlayback leave what page!

  I have a movieclip playing as auto start on the first page of my site.  The d.c. component of play when I leave the page.  How can I stop the movie playback if it has not completed when left navigation page is called.  I look and am unable to find such an event, using a FLVPlayback component.  Currently, there is no code in actionscript to display here.

  Thank you

  If I understand what you're trying to do, the following code is much more effective. Could be even better:

  stop();
  import flash.events.*;
  import flash.display.*;
  import fl.video.*;
  import fl.video.FLVPlayback;
  
  vTinesDayBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  engageBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  weddingsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  birthsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  bDaysBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  graduBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  annivBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  spEventsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  memorialsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  
  vTinesDayBtn.targetFrame = 20;
  engageBtn.targetFrame = 25;
  weddingsBtn.targetFrame = 30;
  birthsBtn.targetFrame = 35;
  bDaysBtn.targetFrame = 40;
  graduBtn.targetFrame = 45;
  annivBtn.targetFrame = 50;
  spEventsBtn.targetFrame = 55;
  memorialsBtn.targetFrame = 60;
  
  function moveToFrame(e:MouseEvent):void {
       if(vidPlay) vidPlay.stop();
       gotoAndStop(e.currentTarget.targetFrame);
  }
  

• Satellite L650-1N8 - overheating and stop playback

  Hello

  Anywone know the reason? For 2 weeks, the fan will operate at 100% (Desktop/Gaming) and times CPU runs you 60% Office - Ingame upward at 100%. After about 30 minutes, the laptop stops.

  I want to check the fan and cooling of the CPU, but I can't open this thing. I'm looking for a guide how to open, but I can't find anything. I put all the screws, remove the battery and HD, but there are some undefined things that cale / locked the case... I don't want to violate the laptop... so... If someone can help me...

  THX in advance
  Jan

  Post edited by: Braindamage10k

  null

  >... but I can't open this thing.
  You should not do this. Manual maintenance is not a public document and you won't find it anywhere. Please be careful with this. Small error can train with broken parts, especially of smallholders in plastic.

  I also think that you may need professional help with this.

• streaming videos, freeze, stop playback

  IAM trying to learn the guitar at the moment and it's frustrating because videos on the Web site to keep gel, stop playing.

  I have windows xp, 8. exp please help.

  Yes, the 240 p correspond to low resolution layout.

  You can test your download speed that actually gets your computer. Here in the United States, personally I use:

  Speedtest.NET - the Global speed Test
   http://www.Speedtest.NET/

  Speakeasy speed test
   http://www.speakeasy.NET/Speedtest/

  The results of these tests can give you an idea if your download speed is sufficient for a good resolution and that perhaps your problem is elsewhere.

  Kind regards

• Stop playback

  This should be obvious to me, but it's not.  I have a Sansa Fuze, 4 GB, uses windows vista. I just installed the new firmware.  I looked at the FAQ and the manual, but I can't find my answer.

  How do we stop it a song that is playing?  Do not delete, just stop

  Thank you

  Repstein40

  Press pause (> |) at 12:00 on the wheel, which stops at the track.  This is a Play/Pause button; pause, stop the current track and search functions will help you to select the next track you want to play. There is no need a button "stop" with digital media devices today who have the memory, unlike the 'old' CD players where you have to physically stop or eject the thing in order to play another track or CD.

  EMMS

• C200 stops playback of Micro SD cards

  Sent this CS, was referred to Sansa FAQ, knowledge base and this forum - everything I had been through previously.

  Sansa C200, v1. I can sync music into the internal memory without problem. When I sync to 2 GB micro SD cards, here's what happens:

  (1) I have sync card #1. Everything works fine. Can select and play all the music that is on the card, as well as music in the brief internal.
  (2) I then sync card #2. Everything works fine. Can select and play all the music that is on the card, as well as music in the brief internal.
  (3) power off, remove the #2 card, replace it with the #1 card. Device shows "Refresh database" for a few seconds, then goes to the main menu. The music does not display the map #1 music, but continues to display the same music that was on the map #2 (more music in the internal memory). Selection of one of the music on the #2 card gives the message "Wrong track." Is not surprising, since it is now map #1 in there.

  Does not feed power is turned off/on several times. Finally, the unit stops to read external cards altogether, does is display the music in the internal memory.

  I tried to reformat the card and the device, without success; problem continues to happen again.

  Also, I tried to update the firmware for the Sansa website - v 01.01.07P now running.

  I have six cards, purchased at different times, from different vendors, and what is happening with them. And the cards all work very well until they are re-inserted after I synchronize a later map.

  Would appreciate any help. Thank you

  Tried Rockbox - which does not solve the problem and has made things even more screwey, so I ended up uninstalling.

  Could not rename the volume while I was in auto detecting USB. When I switchedto MSC, external cards get a drive designation and I was able to rename the drive. I did it with only one card so far, but things seem to be working very well - I waa able to exchange with another card non-renommee and it seems to work. Not willing to declare victory yet, but it looks promising.

  Thank you!

• TLSInputStream.read () stops playback

  I am currently debugging the issue on the Simulator even if it is not specific to the Simulator. I notice that, at random, TLSInputStream.read () blocks and never received the incoming data. To keep things simple, I'm using direct TCP and using the Simulator. I am able to write data to the socket without problem so what is happening.

  I checked Wireshark and data are actually received from the server. Nowhere in the application it never attempts to read more than 1 byte at a time to prevent the other known issue when using implementation of the BlackBerry to read multiple bytes at a time.

  Thread stack:

  • Object.Wait (line): 480
  • Line TcpInputStream.read (byte [], int, int): 158
  • DataInputStream.read (byte []) line: 76
  • TLSRecordProtocol (SSLRecordProtocol) .read (DataBuffer) line: 317
  • TLSInputStream.read (line): 93

  • The reader and the author have their own sons. Reader threads unique task is to read and send what is read in another thread, so there should not be problems with device buffer fills up too quickly.

    My question is: someone at - it of another expeirenced this problem and if a solution was here?

  Welcome to the club !

  Yes, BlackBerry can sometimes stuck completely on a stream and stop receiving data regardless of the number of bytes available.

  We had to put in place a monitoring mechanism that will mark the time of the last reading in the download thread and periodically check this time from another Thread. If the difference becomes too big (14 seconds in our code; other people here used to similar values) we would simply close the connection of this other Thread, causing the main download to fail. He would then restart the download from the last position.

• cannot force the player to stop playback of the audio file

  Hi guys,.

  I'm stuck with the pretty easy task. I have an audio player, start playing the audio file and I just want to stop it, do not wait until the player arrives at the end of the media. But nothing happens! The media playing contiunes. And there is no response at all to my call to the stop method.

  Here is my sample code. I start player and is going to stop it in 3 seconds.

    private void play(InputStream path, String type) {
  
      try {
          // create an instance of the player from the InputStream
          player = javax.microedition.media.Manager.createPlayer(path, type);
          player.realize();
          player.prefetch();
          VolumeControl volumeControl = (VolumeControl) player.getControl("VolumeControl");
          volumeControl.setLevel(100);
          // start the player
          player.start();
  
          new Timer().schedule(new TimerTask() {
          public void run() {
              try {
              player.stop();
              } catch (MediaException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
              }
  
          }
          }, 3000);
  
      } catch (final Exception ex) {
          UiApplication.getUiApplication().invokeAndWait(new Runnable() {
          public void run() {
              Dialog.inform(ex.toString());
          }
          });
      }
      }
  

  BlackBerry jde 4.5.0

  device Curve 8310

  I understand where the problem was.

  So be patient while creating player and pass the correct audio type.

  In my case I have played the .wav files created with "audio/mpeg" type player. That is why all the evils.

• Serious lag, system stops playback stops randomly, while that video display or modification: IMPOSSIBLE to CHANGE

  I have two machines that have suddenly begun to severe lag problems, in the middle of a big project.  I'm unable to change boundaries almost AT ALL at this point, with dates.

  When the timeline, scouring or listening to the video from any Panel in Premiere CS6, the video stops for at least 5 seconds.  In this case at least every 15 seconds, sometimes 2 or three times in 15 seconds, it is impossible to edit.  This happens with video HDV as well as the SD everything was fine until about a week ago, by using the same files, same projects

  Here are my system specs:

  Windows 7

  Service Pack 1

  CPU Intel 2 Duo

  3.17 GHz

  4.00 GB RAM

  64-bit operating system

  Graphics NVIDIA Quadro 4000 card

  Retouching images of internal drive

  OK, I get it.  This machine is underpowered, but I had no problem before a week or two ago, and I'm having the same problem with several machines in our office.

  Things I've tried:

  Restore to day 6.0.3

  Restore to day 6.0.0

  Uninstalled all Master Collection, verification of delete preferences

  Used Adobe cleaner

  Reinstalled CS6 disk 6.0.0 first no update

  System wiped, reinstalled Windows

  Reinstalled first CS6

  Switched to an another NVIDIA Quadro 4000 graphics cards

  Update graphics card drivers

  Remove first preferences

  Tested on secondary machine with pictures SD, same result

  C: 63 GB of free space

  Drive internal secondary, ITB, 245 GB of free space

  Help!

  OpelGT71 wrote:

  . . . I have the same problem with several machines in our office.

  If this problem appeared simultaneously on several machines, is there a common factor? They are connected to the network? Are they connected to the storage network? Something up-to-date on all your computers?

  MtD

• Cannot import video from Sony handycam HD. start the button market orders / stop playback of the camera but no pictures or sound appear on the Editor screen.

  I can't import video from Sony Handycam HD 1080. Start button on the editor controls playback of the camera, but no image appears on the screen of the editor. Thnx

  andypfaris

  What version of Premiere Elements you are using and on what computer operating system is running?

  You doing DV or HDV firewire capture of data in a Capture of the first Hare elements window? What is your

  What is your predefined project?

  Is it a "it worked before but not now" show or "it never worked before"?

  Thank you.

  RTA