Storage and Application problems

Similar Questions

• Update of persistent storage and application

  Hi all

  is there a way to keep the persistent storage when I update the application on the device/Simulator? At the present time, I have to remove my storage before persistent that I have send a *.cod on the device/Simulator update, otherwise I get the javaloader message that the module is still in use.

  Kind regards

  Carsten

  Yes, and it works. I guess the behavior of everything that I experience is according to the design, in fact, that it makes sense, I have to admit.

  Conclusion:

  Without a persistent store, you can load and delete modules as you want without reinitialization.

  With a store persistent activity the reference must be resolved in a controlled manner, allowing RIM only via a reset after downloading the updated application. Delivery to zero then correctly replaced the old app of the new application and allows access to the preserved persistent store.

  I hope that my conclusions are correct. However, it is inconvenient because the sim card reset takes quite a long time...

  Thanks for your time, LWG!

  Kind regards

  Carsten

• I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:

  2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.

  3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  *****

  MS - MVP - Elephant Boy computers - don't panic!

• I can not print from Firefox, but can all the other browsers and applications (such as MS Word, notepad, etc.). I get a misprint on the print monitor as if it was a problem of queue.

  This is a recent development, but I can not print anything in Firefox. Printing open normally, it's going to the right printer that works... I can print other browsers and applications. It acts like it is in queue and then a printing error occurs and it will not be printed. I closed and reopened Firefox, open in safe mode, cleaned cache/history/cookies and restarted twice. Nothing makes no difference. Also tried printing from the preview before print that had the same result. I can print all other browsers and applications without problem, so it must be within Firefox.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• My phone 16 gig is constantly low on storage, well all I can see to manage storage is < 2 GB of music, mail, photos and applications.

  My phone 16 gig is constantly low on storage, well all I can see to manage storage is < 2 GB of music, mail, photos and applications.

  Open iTunes on your computer, and then connect your device to your computer. In iTunes, select your device. You will see a bar that shows how much storage your iOS content uses, divided by type of content. Roll your mouse over a type of content, as well as other applications, to find more information. If storage is not yet put in correspondence to the top, then back up the phone via iTunes or iCloud, wipe the phone to the factory settings and restore your information. That should erase all ghosts who gets up on the device.

  Check your storage space on your iPhone, iPad and iPod touch - Apple Support

• My iPad mini claims its storage space is full but I use only 10% of the storage. I deleted files and applications but it does not change; What can I do?

  I can't recover any storage and I do not know or cannot find what is using it.

  You probably have an App or a corrupt system and may have to do a restore of the system to be solved. However, it would not hurt to first try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears.

  The system restore. First save your device via iTunes. Import your photos on your computer, and then copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup.

  https://support.Apple.com/en-us/HT201252

• vSphere high availability with no shared storage? And general problems with VMware partner supplier

  
  HA can function without shared storage?

  It may not by the availability of vSphere manual.  However the global VMware partner who sold me on VMware solution said that the shared storage is not required for HA.

  This is the same guy who told me that I would not need to buy Windows Server licenses because everything was included in the package (vSphere Essentials Plus).  Now, I have no Windows license, no shared storage and a customer who will not be happy that we did not include these costs in the citation for this project.

  HA can function without shared storage?

  No.... you need a storage shared for HA.

  This is the same guy who told me that I would not need to buy Windows Server licenses because everything was included in the package (vSphere Essentials Plus).  Now, I have no Windows license, no shared storage and a customer who will not be happy that we did not include these costs in the citation for this project.

  Maybe your partner speak the vCenter Server Appliance that is included on vSphere Essentials Plus and you can use this device to manage your vSphere, ESXi without need a VM of Windows (with Windows license) to install the vCenter server.

• Windows XP SP3: Unable to start, System Restore cannot drag and drop ALL the files/folders on the desktop and applications, many unable to start, services cannot search, cannot copy or transfer the any files folders...

  After a recent power outage, my system has restarted with a weird and very common Windows problems range. The system boots fine, all my personal files/folders/apps are intact, have suddenly stopped almost all functions of applications, but many crucial functions of the Windows kernel. Everything seems to point to several Windows Services are unable to start (administrative tools on the start menu). I am running Win XP SP3 and that he was going to upgrade to Windows 7, but I wanted to backup everything in advance. As I have 29 000 hours on my C: drive and a lot of time invested in my system, files, and applications, I am extremely reluctant to risk losing my files and applications by performing any type of reinstalling Windows. Strangely, begin to almost all my apps and all my files are accessible for the most part, but I've lost the ability to drag and drop files, folders or items in a list within the applications COMPLETELY. I can't copy or paste anything, can't move the desktop icons (although I can create new files and folders). So at the moment I can't save anything or even a single file transfer to a hard drive on another storage medium. Immediate reaction: try safe mode and try the system restore safe mode has the same problems (likely due to the large number of system services that inexplicably refuses to start) and the system restore says an error window saying "system restore is not able to protect your computer at this time. try restoring the system running and restart again", which of course NEVER changes. It's the equivalent of getting a tire on your car in the middle of nowhere to find the spare tire flat and the missing Jack. I have used to be fanatical about the definition of the regular restore points, but now can not access them. I have backups of most of my personal files, but over years have lost most of the original installation CD for many of my applications (there are over 100 applications on my system) and I don't want to lose the file associations and architecture of directory tree that it took my so long to implement. I started with Win XP media center edition of first (circa 2004 or almost) and have migrated twice more of 3 hard disks and 2 computers. All this time (5 years of daily use), I have NEVER known so many malfunctions for as many Windows basic and vital functions at the same time. I tried a lot of 3rd party "windows fix - it / registry repair" apps, all have no effect. Everything I can speculate is there was some serious damage to the registry and have no idea how/why so many Services refuse to start. In MMC, more than half of the services actually start and run, the rest all give the error message "the service or dependencies is not start (error 1068).» In addition, very oddly, no. APPS or windows appear in the toolbar AT ALL, but the Quick Launch toolbar works very well, just like the tray button and start tasks (?! )!). If I reduce a window, it "disappears" (Nothing on the task bar), but I can restore it using the alt - tab keyboard shortcut to switch apps, so all applications/windows appear on the list of the Task Manager. A few apps is paralyzed bad, as the player windows media, itunes, etc. (I guess because the service windows audio can not not start), some won't start at all, but 90% of them work fine, except to try to copy or back up all files. I can create new files, however. I'm desperate to find a solution to repair XP3 Win WITHOUT losing my installed applications and files, before I try and switch to WIndows 7. Any help/suggestions/links/advice would be much appreciated. I'm an experienced user, but I've never met so many malfunctions based on the OS at a time. I, however, very painfully learned (years before that my system so complex) it's been almost a re-installation of Windows guarantees to lose my installed apps and files, the directory tree architecture associations.

  Help, please!

  I'll be honest with you - your message is so difficult to read that I don't bother to go through all that. Next time consider using white space, ball or points numbered, etc. to make your message more readable. I stopped reading after your first sentence and only scanned the rest quickly. I do not mean to hurt your feelings; just trying to help you get targeted answers you need for the future.

  The blackout has corrupted your Windows installation. Back up your data now. Since you have problems so much, it would be probably best is to remove the hard drive, put it in a USB drive enclosure and attach it to another computer to copy the data OR start the target with Linux Livecd such as Knoppix system and copy the data to an external hard drive. IOW, do not use the damaged windows to try to get your data.

  You can try a repair that will leave your programs and facility data intact, but with this widespread bribery, it is unlikely to work. However, it takes only a few minutes and is so worth a try. If the repair facility does not work there is nothing to do, but a clean install. And Yes, it will mean that over again.

  Consider buying a UPS to help prevent future damage by power outages. For a single computer, you should look for one in the area of $60 to 80. A more expensive UPS is not necessary. Another good disaster recovery strategy is to buy an external hard drive and Acronis True Image. You can image your system (and can make an incremental backup image so that your image is still current). You can apply your image and be back running that you were in relatively few minutes after a hard drive or Windows to fail.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!

• HP SAS HBAS with IBM Storage and SAS SAN vs iSCSI SAN

  Hello, I am working on a project, and I have to add a SAN solution to my client infaestructure. My client already has a HP Server and we wanted to add another server, but an IBM one. I thought I'd add storage IBM (DS3200) that has two SAS interfaces. The problem is that the Distributor IBM says who does not know if the HP Server will be able to communicate with the SAS IBM storage. So, one possibility was to put on the server HP HP SAS HBA Controller. The second option is to put a SAS HBA Controller IBM. I think that the SAS is a standard, it doesn't matter what brand I use of HBA. Should not it works anyway?

  There is another option which adds instead of SAS one iSCSI storage. The problem is that I do not know the performance than the iSCSI storage. I want to put inside it's VM with Exchange Server (50 mailboxes), an ERP (for 50 users) with it's SQL Server, a computer file virtual, a virtual machine server with Active Directory.

  So, the questions are:

  1 - does anyone have experience with iSCSI storage to see if its performance if goog enough (I intend to use a dedicated to the iSCSI network gigabit switch)?

  2 does anyone know if I use different brands of servers (in this example an IBM and HP) with a SAS storage IBM? Who be it already done? The HP SAS HBA are compatible with the IBM iSCSI storage? IBM SAS HBA are compatible with HP servers?

  3. in the case of being able to do what I say to question 2, that do you suggest? Put a HP SAS HBA within the HP Server or upgrade an IBM SAS HBA inside HP Server?

  Of course the option I want to use is the addition of SAS IBM storage instead of using an iSCSI one, but I'm not sure of their compatibility between HP and IBM storage servers.

  Thanks in advance.

  In this case, the reason why I wouldn't use SAS is that your application requires this level of performance and the cost as not justified. You can configure iSCSI and direct savings in most important features such as snapshot, replication and dedup. If you were available to this solution with the DS3200 spend you 10K and that none of these features. Performance is very good, but you will find that the system is not yet warmed up with this load. The SAS Protocol can support high IO, but is not what provisions IO, is the number of disks and the RAID mode that defines your ability to e/s. I put 40 K terraced small IOPS / s on a single caching of 1 GB iSCSI target, so he can make the e/s. flow is not as high , but do you really need it. In the future you can profitable move to 10Gbe if you find insufficient bandwidth, which would be faster than the SAS 3 GB limit that is uneconomic to upgrade 3 + times.

  Kind regards

  Mike

  http://blog.laspina.ca/

  vExpert 2009

• 10 improvement of the Windows path hangs on "place the external storage and press OK.

  Hello

  This will be my first post on this forum.

  A couple of weeks ago, I bought a Toshiba SATELLITE CL10-B-103 for my son. The CL10-B-103 has installed Windows 8.1. Tonight I plan to make the installation of the Windows 10 upgrade because Windows 8.1 announced that he was ready for the upgrade.

  The trial progressed slowly but smooth and without problems until now... As the laptop is equipped with only an HD 32 GB the trial upgrade was informed that I had to stick a USB key. After that, the trial continues slowly but smoothly, but who did not question because I had all night. However after the first reboot of the system when he was about 60 or 66% of installation of process this error message showed: place the external storage and press OK. It's very strange since the key USB has been removed at all and was still in the system. It is strange, is that both the OK button as the Cancel button are not selectable. Without passing by the touchpad, not a tab or an entry.

  Some community online Windows 10 post mentions that, via the BIOS, the system must be initiated from this USB key. I tried to reboot the system with DEL, F2 or F8, but I couldn't get into the BIOS and wasn't able to change the boot sequence.

  After each "restart" the same error message appears. It does not matter that the USB is in it or not.

  So, my conclusion is that my CL10-B-103 is suspended/East in a loop. I don't know how to proceed.

  Please, I can really use some help.

  Thanks in advance.

  Because it seems that I can not only edit/change a message I am answering my own post now...

  The problem seems to be resolved. When I was able to use the touchpad I could push the OK butten and the upgrade product now.

• Deleted many pictures and applications; photos - 0-available.  Impossible to read or send emails.

  Deleted many pictures and applications; bought 50 GB iCloud storage; Still - 0 - storage on the iPad.  Impossible to read or send emails.  Help!

  Additional storage iCloud purchase will give you more space for your backups, he won't give you more space on your iPad.

  Since the removal of the pictures (you have also emptied the recently deleted album?) have you tried a soft-reset/reboot to see if that frees up space? Press and hold buttons sleep and home for 10-15 seconds (ignore the "slide to turn off"), then the Apple logo should appear and the iPad should restart

• Satellite L750D - update BIOS 2.1 and its problem

  Hello

  I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

  I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

  Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

  Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

  The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

  I had the similar problem with my other laptop equipped with a Realtek sound card.
  The sound appeared after connection and remove the headphone jack
  But I could solve this latest installation updated audio driver the Realtek driver page.

  But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
  Therefore, the solution could not be useful for you.

  However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
  On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
  Not quite sure if this is the latest version, but you can test it.

  To manually update your driver:

  1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
  2. right click on the device you want to update and choose Update driver software
  3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

• Change username and logout problem - not supported

  When the user switching or disconnection of the screen becomes black and unsupported is in big letters white, it restarts the computer, I start windows normally, then a box just telling me I was expectantly stop and windows will search for a solution, I have 3 users myself as an administrator and two others, if I start it in safe mode, you can switch or disconnect any problems. I uninstalled the last program which had been installed and tried to do a restore of the days different samples about 5 times each time I also unplugged my external hard drive in case that was the problem

  Can anyone help please

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.
   
  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Go to the all tab and uncheck everything to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Blue screens are caused by defective material or defective hardware drivers.

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post these details here.

  To see if any recent system change caused it

  In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

   

  Standard hardware troubleshooting

   

   

  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
   
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

  Dump files

   

  Dump files are files containing the status of the machine when it crashed. We can analyze the file to identify the driver (or program) causing the accident. See the last section on how to get them analyzed by a volunteer.

   

  Analyze dump files

  If you want to analyze your own dump files.

   

  You need start exploring as an administrator to access the files in C:\windows\Minidump. Explore a right click and choose run as administrator.

  
  Download and install the debugging tools for Windows

  http://msdn.Microsoft.com/en-us/Windows/hardware/hh852363

  Install Windows SDK, but simply choose the debugging tools.

  Create a folder called symbols in C:\

  Start Windbg. Menu file - path to the symbol file and enter

  
  SRV * C:\symbols* http://msdl.microsoft.com/download/symbols

   

  Close, and then reopen WinDbg. Menu file - Open Crash Dump

  It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

   
  Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. If it shows a driver, you will need to update the driver identified. Most of the pilots are in c:\windows\system32\drivers.
   
  Look for the drive for a file.
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type by replacing drivername.sys by the name of the file (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\ drivername.sys/a/s

   
  If it has a file system see if you can get a program to analyze - v.

  Type in the theWinDbg command prompt

   
  ! analyze - v

   

  -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.

   

  for example

   

  Nom_processus: java.exe

  Nom_image: ntkrnlmp.exe

   

  Nom_processus does not appear in the output of v - analyze and only if a program is from the call that was blamed.

   

  Download them for analysis

   

  Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.

   

  SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

  If you downloaded one of the Live applications or a web site based Live mail account, you already have access to your Skydrive.

  Put your list of events in the Public folder and copy the link in the address bar.

• How to make a backup of the drivers and applications

  I have a HP Pavilion Desktop PC all-in-one 23-B115EA, originally with Windows 8 installed which I have updated to 8.1 of the store.  After a problem, I was advised to create a System Image on an external hard drive, what I've done.  I also have a recovery disk including the recovery on a USB Partition and a new Restore Point.

  The reason why I write, is that what follows has been also sugested "Furthermore, make a backup of the drivers and Applications.» Still, if the hard drive needs to be replaced, you will need to install all the drivers and perhaps some applications again for which you have this backup. "I don't know how to do on the PC and I was wondering if it was possible.

  Best regards, Mike-01

  Mike, you're welcome.

  I know that in the past, there are third-party programs that could back up the drivers, but I could not find one to win 8.1.  With respect to applications, the CD recovery and Image will be all you need.

• E7440 - sleep issues and display problems

  There are three major issues I have with my laptop, and I was wondering if someone else was too... I have not yet contacted dell support, but I will in the weeks that follow if I figure somehow what he has going on myself.

  I had my laptop for a little less than 2 months, so these are the things that I noticed.

  Number 1: when you plug the power cord into the computer, the screen freezes on what it is currently. I noticed this problem because sometimes when I plug in my power cord and try to use the mouse pad to select something, the mouse pointer is gone! I have to disconnect - reconnect the power cable to get the pointer of the mouse to display again. I don't know what is the cause of this problem. It seems to have to do with the screen

  Number 2: when I wear my E7440 autour in my bad, or do close for long periods of time > 3 hours (I simply close the lid), the computer will be SHUT DOWN. The thing stops completely, even if I just closed the lid! At first, I thought he was just in hibernation, so I disabled hibernate in my power settings. But no, even when the computer is asleep, it will be occasionally closed it self without reason at all.

  Earlier, I closed the lid on my laptop and put my bag, then went back to my office about 10 minutes. When I sat down at my desk and opened my laptop, to my surprise, he had stopped by itself. All my open windows, browsers and applications have been closed and opening of chrome and microsoft word, I was greeted by "your browser is not stopped correctly" and "microsoft word recovered files. This points to the conclusion that it was not in Hibernate's fault, but rather a problem with the laptop stops when it is put to sleep. This issue must be corrected immediately if this is a widespread problem.

  Number three: when the computer wakes back from hibernation or from standby, the computer is very very slow, even when it is plugged. It is slow forever, OR until that power management is set to everything he needs 'high performance '. during the visit to the previous powerplan of high performance, the speed of the system is restored. That tells me that the system limits himself when he took over after the hibernation, because God knows why. This must be fixed; many people (including me) just thought that the system itself was slow and low power, without realizing it was just limiting himself when he came out of the mode standby or standby extended.

  If someone has one of these same problems, or knows a way to fix them, do not hesitate to post.

  Update to original poster! It does not work!

  PARTIAL CORRECTION

  1. press F2 during the boot and go to settings.

  2. go in power options and turn off 'block sleep '.

  3. Save and reboot.

  4. the system now seems to go into Hibernate when closing the lid.

  5. in fact in Windows, you don't see the option to sleep more.

  It takes more time to wake the portable computer, but at least all the work is intact.

  Let me know if it helps you.