Storage processor is passed to an unmanaged to an IP address change status.

Similar Questions

• is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?

  Original title: Dual boot

  My XPpro on a former player, was upward. then, I got another new drive, installed Win7Ultimate.  Well, I got the OLD disk works with XP on it.  But, some of these apps DO WORK not on Win7.  so, at least for now, I have two drives installed on the same computer.  is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change?   Operating systems already are on 2 different disks.

  Hello

  How to set up a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  Definitive dual-booting guide: Windows 7, Linux, Vista and XP step-by-step
  http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htm

  Dual Boot computer preinstalled Windows 7 with XP
  http://www.howtogeek.com/HOWTO/8790/dual-boot-your-pre-installed-Windows-7-computer-with-XP/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Permutation of the storage processors

  Hello

  We have a customer who has a group of several Member. Recently a PS6510e was added, but it is necessary to replace the 10GbE, 1GbE controllers. Don't ask! I know this as your way of thinking.

  Is the best way to do this in order to evacuate the PS6510e, is remove group, replace MS and initialize it by adding again to the Group provising existing capacity is sufficient free pool?

  Thanks in advance.

  Dell does not support downgrading controllers.   You must add a new 6500E evac the 6510E

• My iPad mini claims its storage space is full but I use only 10% of the storage. I deleted files and applications but it does not change; What can I do?

  I can't recover any storage and I do not know or cannot find what is using it.

  You probably have an App or a corrupt system and may have to do a restore of the system to be solved. However, it would not hurt to first try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears.

  The system restore. First save your device via iTunes. Import your photos on your computer, and then copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup.

  https://support.Apple.com/en-us/HT201252

• Storage Vmotion to a new data store get UUID and MAC change to hot after reboot

  Hello

  I have a strange thing that happened on my vcenter.

  Just do a vmotion hot storage between two data store.

  I reboot the virtual machine and received no message to validate if I moved or copied.

  When the virtual machine is restarted, I see that changing the UUID and MAC address.
  Make me an error with an application running on it.

  Did anyone see that already?

  We do some testing and solution for this problem is to download the VM's vmx file on the local system and apply these settings:

  If you want to change the setting always or always create , power off the virtual machine and change its configuration (.vmx) file. Remove the line containing uuid.action = "crΘer" or uuid.action = 'keep'.

  The configuration line such as this to keep the UUID and MAC after vmotion: uuid.action = 'keep '.

  Reupload the file on the data store and restart the virtual machine

• I have an outdated e-mail address and I can't sign in icloud. When you pass to come up with the old address and ask for password. I just want to change both.

  Basically I asks me to enter password Apple ID to continue using iCloud with an old email address that is not hosted by gmail. I have a gmail account, but I can't change the email and password. All can give me suggestions.

  What about Paul

  Have you changed your existing Apple ID to the new e-mail address at: Apple - my Apple ID, but not a not disconnect from iCloud before doing this? What is the situation? If this is not the case, can you provide more details?

  See you soon,.

  GB

• If you use network storage, configure ASM disks with external redundancy groups

  Hi Experts,

  If you use network storage, configure ASM disks with external redundancy groups. Don't use groups of Oracle ASM failure. Oracle failure groups consume cycles additional CPU and can run in unpredictable ways after suffering from a disk failure. When you use external redundancy, disk failure are transparent to the database and do consume no additional database CPU cycle, because it is discharged on storage processors.

  This does not mean

  • RAID 1 + 0 for diskgroup + REDO1
  • RAID 1 + 0 for diskgroup + REDO2
  • RAID 5 for diskgroup + DATA
  • RAID 5 for diskgroup + FRA

  Is this one suggested, the recommended best practices for oracle on VMWARE?

  
  

  Thank you and best regards,

  IVW

  
  

  Hello

  You can check the storage analysis as well...

  http://www.Dell.com/downloads/global/solutions/tradeoffs_RAID5_RAID10.PDF

  discussion of the Oracle

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:P11_QUESTION_ID:359617936136

• Number of targets for a storage HBA adapter?

  I'm setting up the connections of storage host as below is to say each HBA host with 2 connected to FC switch, which in turn connects to the storage as below: -.

  

  Now if I select the host & go to Configuration-> storage adapters-> select an HBA.

  I can understand the number of paths, it is double since via adapter HBA selected, I have two paths for each data store.

  

  But why target number is 4, even if via this selected HBA adapter there are only 2 paths by the data store and not 4 paths?

  Don't forget that we select one of THEM, so logically it would the target number according to the targets available via this HBA adapter only

  If you have two storage arrays with both SPS on each storage array, then you will have 4 targets:

  Target 1 - Bay storage 1-1 storage processor

  Target 2 - Bay storage 1-2 storage processor

  Target 3 - Bay storage 2-1 storage processor

  Goal 4 - Bay storage 2 - storage processor 2

• Storage vMotion + vmdk files in different folders

  Hello

  Storage vMotion will spend the vmdk files [in 2 different folders on the same data store for the moment] in the same folder while that migrated to the different data store?

  Why the vmdk files are in 2 different folders:

  Windows 2008r2 was misconfigured evil so anything by rebooting, it went to the system recovery. Was not able to recover the system.

  The system was rebuilt, and 2 D: and E: drives were attached ["use an existing virtual disk"] as of the existing vmdk disks to the new virtual machine.

  So drive C: [rebuilt VM] vmdk file is located in files vmdk D: & E new-vm-folder & readers are old-vm-folder.

  So "storage vMotion will pass the vmdk files [in 2 different folders on the same data store for the moment] in the same folder while that migrated to the different data store? I know that storage vMotion and change of name of the files/folders works well.

  If this is not the case, what would be the best practice to get is sorted?

  Thank you very much

  Pawel

  Welcome to the community - Yes it will be. The other option would be to turn off the cold and virtual machine migrate the virtual machine to the correct data store.

• Upgrading processor on Satellite L300-1BV

  I've already updated the laptop of a T1600 (Celeron), to a T3200 (Pentium Dual Core). But no one knows how far I can go to level P 478 processors?

  If so, could provide you the processor numbers?

  + The message was edited: model number changed on the subject.

  Satellite L300D-1BV is know for me. This model number is correct?

  However, in general, you should check the compatibility of the chipset.
  Where the chipset is compatible and would support the CPU, you have good chances to make it work.

  But I'm not sure if BIOS would be able to manage the new processor properly.

• upgrade processor for satellite a10 s811

  Hi, I have an a10 with celeron 2, 4 GHz,
  is it possible to change the mobile processor for a P4 or Intel?
  I've looked everywhere and has had no response from toshiba France
  Thanx.

  Hello

  Sorry, it is not possible to change the processor for a laptop computer.

  You can only change things like the memory or HARD drive.

• upgrade of e300 AMD processors

  The 1.3 Ghz processor is a little on the slow side so I was wondering if I could just buy a faster processor and plug?

  Here are the specs.

  Thank you

  Yes with a lot of pain and sadness. Why not just buy a SSD? Much easier to install and more expensive and it will make you think you double the speed of the processor. I'm a bit of a crusade for change of thought. Back in the day, to accelerate the process of a computer, you have thought in terms of memory and a faster processor. The bottleneck is now the hard drive 5400 RPM of old school. We can do this shot upward with the rest of the modern components with a SSD drive.

• 23 - g013w: passes simple

  I have simple pass on my computer and I like the concept, BUT when I read a page or just to think about what I read in as a minute my screen turns off and simple pass appears and I have to continue to put in my pass, I need to know is, if there is a way to do a long time before the screen turns off and the simple pass pop off. I managed to change my sleep 10 minute thing, but it doesn't seem to affect simple pass, now I can remember even how I changed that. None of my children are familiar with windows 10 enough to help me over the phone. Please keep in mind, I'm not too familiar with many terms that are used today, so if you could, please tell exactly what buttons to push to get to where ever I need to change the time on my simple pass. I hope someone out there can help you because I'm computer most of my entrepreneurial friends and they rely on me to help them. Thank you in advance.

  Hello

  The first thing I would check is the following.

  Right-click on an empty area of the desktop and select Personalize.

  In the next window, select the themes in the left pane, then theme settings link.

  In the next window, select the screen saver link to the lower right.

  In the screen saver settings window, you can adjust the time before the screensaver kicks in the menu drop-down 'Wait' and Remove the tick in the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change of the parameter.

  Kind regards

  DP - K

• WNR2200 Netgear ReadyShare USB storage does not

  I have trouble getting the USB ReadyShare working on my router Netgear WNR2200 storage. If I reset the router to factory by using a paper clip and now the reset button in and then just connect a computer to Ethernet, 1 Port, it works fine and I can access by typing just "\\readyshare" in windows Explorer. Unfortunately I can not leave the router with its factory settings as it is not good for my network, I disable DHCP, because it's the 3rd router on my network. The router itself works great when I do that, all the computers connected to have a connection to the internet and can also connect to each other etc... purpose storage readyshare file sharing no longer works. It's just as if she is not there.

  While I was trying to experiment when he actually stopped working, so I reset the router to factory settings and started again. Connected to the computer first to 1 Port Ethernet and it worked fine as before. Went in the router settings and turned off DHCP and it has always worked well. It is only when I actually connect the router to other routers which ReadyShare USB storage stops working. When it is assigned an IP address from my main router which is the DHCP I guess? I don't know why that's upsetting it well? I checked on the same workgroup (a setting that I didn't notice initially) but also makes no difference.

  Does anyone have an idea what I am doing wrong? I guess it is just configured wrong and it's probably something really simple, but I can't see it. Any help would be much appreciated, thanks!

  Simon

  Change the LAN IP is affecting an IP address on the WNR2200 to be in the same range of main router.

  You will be able to change this in the LAN Setup.

  The steps would be:

  1. do you have a computer just be directly to the WNR2200 and nothing else.

  2. navigate to the router admin page.

  3. change the LAN IP to a unique IP address, such as 10.0.0.200 or one IP address that is not used in the network.

  4 disable DHCP.

  5. once the settings are saved, connect the main router to one of the WNR2200 LAN ports.

  From there, you should be able to access the USB key.

  Let me know what happens.

• Can I update to this processor DC7900 SFF?

  -Hello, I have a PC HP - Compaq DC7900 SFF with a processor Intel E7300 (Core 2 Duo), and I want to update this processor by an Intel Q9650 (Core 2 Quad) (only to change the processor)?

  -Thank you.

  Hi, Pepito,.
  
  Yes you can upgrade this processor is compatible.
  
  Click on "Bravo Star" icon on the left side so resolute.
  
  I am an employee of HP, but the comments in this forum is of myself and is not HP