Storage sensor is disappear in vCenter Client - State of the Hardware tab

Similar Questions

• 9800: how to determine the State of the hardware keyboard?

  How can I determine if the slider unit is open or not?

  Welcome to the BlackBerry Forums.

  Look at the DeviceCapability class in the OS 6.0

• Major bug with storage Var MX 7.0.2 Client?

  I think I found what looks to be a pretty big bug for client variable storage in CFMX. Strangely, the bug actually exists in CFMX 6.1 and CFMX 7.0.2 (the two versions, I test against), but only cultures upward in 7.0.2. In addition, you will notice that I say it's a matter of client variable (it is), but the bug seems to be with JSESSIONID, I thought only relate to session variables. My statement of the problem is that the variable customer 'disappear' after having been defined. In a Word, I log onto my site, which fixed a couple of variables customer, and then when I browse another page on the site, client variables are no longer in existence (it seems as if I've never connected before). I'm running CFMX 7.0.2 Enterpise (deployment of WAR) on Red Hat Enterprise Linux 4.0 (update 3) using the internal JRun web server and using J2EE session variables.
  
  After a bit of detective work, I noticed by looking at the HTTP headers on my first visit to the site (with no existing cookie set) which JSESSIONID is defined * double * when I first hit my site. However, a JSESSIONID is being stored in cglobal table while the other JSESSIONID is stored in the actual cookie, which causes subsequent research of incompatibility. Therefore, it seems that if I have never connected before.
  
  Here are the relevant header information when you first visit the site:
  
  HTTP/1.x 200 OK
  Set-Cookie: CFID = 102; expires = Thu, August 14, 2036 13:20:27 GMT; path = /.
  Set-Cookie: CFTOKEN=66021081eab5f673-3609FCE3-CF52-FC2B-25E974A728406FC5;expires=Thu,14-Aug-2036 13:20:27 GMT; path = /.
  Set-Cookie: JSESSIONID = 583033e973025152237c; path = /.
  Set-Cookie: JSESSIONID = 58306b4060d425456d5c; path = /.
  Date: Tuesday, August 22, 2006 13:20:27 GMT
  Content-Language: en-US
  Content-Type: text/html; Charset = UTF-8
  Connection: close
  Server: JRun Web server
  
  See how there are two directives Set-Cookie JSESSIONID? The interesting part is that CFMX 6.1 (on Solaris, at least) is exactly the same, as long as the Set-Cookie guidelines double go. However, here's where 6.1 MX and MX 7.0.2 differ...
  
  If you look at what's coming in the real cookie compared to what is stored in the column 'data' in the table cglobal MX 7.0.2 you will see (based on the header above information):
  
  urltoken = CFID #= 102 & CFTOKEN #= d 66021081eab5f673-3609FCE3-CF52-FC2B-25E974A728406FC5 & jsessioni #= 583033e973025152237c #lastvisit = {ts' 2006-08-22 09:20:27 ""} #timecreated = {ts ' 2006-08-2209:20:26'}#hitcount=2#cftoken=66021081eab5f673-3609FCE3-CF52-FC2B-25E974A72840 6 FC 5 #cfid = # 102}
  
  The key bit is the JSESSIONID value, that has the value 583033e973025152237c. However, the cookie JSESSIONID value is 58306b4060d425456d5c.
  
  The same comparison with CMFX 6.1, the HTTP header info:
  
  HTTP/1.x 200 OK
  Set-Cookie: CFID = 3499; expires = Thu, August 14, 2036 13:31:50 GMT; path = /.
  Set-Cookie: CFTOKEN=525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8F8E1;expires=Thu,14-Aug-2036 13:31:50 GMT; path = /.
  Set-Cookie: JSESSIONID = 86308f1257484a747d6c; path = /.
  Set-Cookie: JSESSIONID = 8630627b049162583e68; path = /.
  Date: Tuesday, August 22, 2006 13:31:50 GMT
  Content-Type: text/html; Charset = UTF-8
  Connection: close
  Server: JRun Web server
  
  And this is the value of cglobal.data column:
  
  urltoken = CFID # 3499 = & CFTOKEN #= 525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8F8E1 & jsession id #= 8630627b049162583e68 #lastvisit = {ts' 2006-08-22 09:32:03 '} #timecreated = {ts ' F8E1 2006-08-2209:31:50'}#hitcount=9#cftoken=525ea9a5badb14f2-36146ADA-DCAC-CE63-1706ADD070C8 #cfid = # 3499}
  
  And the cookie JSESSIONID value is 8630627b049162583e68.
  
  Note the key change in behavior between 6.1 MX and MX 7.0.2? 6.1, even if the two Set-Cookie instructions were updated, the logic of client variable storage at least systematically used second JSESSIONID value. In 7.0.2 it appears that the first JSESSIONID value is stored in the table cglobal while the second JSESSIONID value is stored in the table cglobal.
  
  This is where the plot gets complicated still further... Even if my client variables are not returned on the following clicks through my site (he tells me I'm not connected), values for CFID/CFTOKEN/JSESSIONID are * not * re - put on each page. In fact, if I query the cglobal table directly out of my CFID/CFTOKEN, hitcount and lvisit values are actually updated!
  
  It is a major obstacle in our migration process. Can someone dig a hole into my configuration/logic and point out something I am doing wrong? The craziest part about this, for me, is the client variables which disappear even if it looks like the culprit is the JSESSIONID value. I even tried to extinguish the J2EE session variables and exactly the same problem occurs.
  
  Kind regards
  Dave.

  AAAAAAAARRRRRRRGGGGGGGHHHHHHHH! I got it!!!

  I am frustrated with Adobe right now, but I finally got inside the client variable issue. You know how the accession of ColdFusion is believed to be cumulative? Yes, well, not so much. It turns out that the CFMX 7.0.2 release is available with 3.3 DataDirect JDBC drivers. In addition, it seems that something in the client variable code between MX 6.1 and 7.0.2 regressed so that updates of the client variable under the hood has broken with all pilot pre - 3.5. Once I updated to pilots of 3.5, everything worked, including the spy feature and the variable updates the customer.

  Adobe, this must be resolved as soon as POSSIBLE. It's a huge show-stopper for site using client variables. I don't know if it is limited to Oracle because I have other RDBMS platforms to test against, but is a big problem. The difficulty here is update installation programs that are downloadable from your site with 3.5 drivers * and * update 7.0.2 Release notes note that the game 3.5 driver isn't in any downloaded bits before every time that you update the installation programs.

  Jochem, thank you very much for your persistence in helping me through this issue.

  Kind regards
  Dave.

• State of the listed material unknown state via API, not so much using VMware Infrastructure Client

  Anyone know if it is a result of ESXi vs say Foundation, company, etc.?  Querying the State of the material using the perl Toolbox storage devices returned the status of "unknown".  While the use of the Windows infrastructure client under 'configuration' then 'State of health', storage devices are listed as with the lights green and 'Normal '.

  through perl toolkit, for example:

  print join ("\t", $host - & gt; name, $hba - & gt; device, $hba - & gt; key, $hba - & gt; model, $hba - & gt; status, $hba - & gt; pilot, $hba - & gt; bus). "\t";

  foo.com vmhba32 key - vim.host.ParallelScsiHba - 4 port SATA IDE Controller (ICH9) vmhba32 unknown ata_piix 0

  To obtain the status of storage devices, as seen in VI Client, you must watch HostStorageElementInfo API. This API gives the State of operation of the various components of storage. To access data from this API, you need to drill down to the next of the object "HostSystem: property

  runtime.healthSystemRuntime.hardwareStatusInfo.storageStatusInfo

  This will give the HostStorageElementInfo table and held the State values, as seen in the VI client.

  Hope this information is useful.

• Fact vCenter Client 5.0 / vCenter Server 5.0 supports transferring files to a virtual computer?

  Hello

  I got to know that VMware WS - SDK integrated 5.0 features of VIX - API to perform operations within the guest operating system.

  Onyx project let us know the code for everything we do in vCenter client.

  So, the question is to know if these operations are supported by vCenter Client 5.0.

  Because if it is yes then we learned to know the code for these operations using onyx.

  Hello-

  I think that LucD spoke how PowerCLI code be generated out of the Onyx session and has been assuming that you connected to Onyx with your vSphere client.  You can also connect to a session PowerCLI Onyx and Onyx creates the calls/code based on the same API as it would in when connect you through the vSphere client.

  To connect to your session PowerCLI at Onyx, you can use a couple of parameters on Connect-VIServer. as:

  Connect-VIServer localhost -Port 1545 -Protocol http
  

  This assumes that you have launched Onyx on your local machine, and that you let him listening on the default port of 1545 (this Onyx server info is displayed in the title bar of the window of Onyx).  Note about the Protocol: it's just how Onyx works for now - it does not use https for communication between your local client (client vSphere or PowerCLI) and the Onyx service itself.  Do not too much risk, since this clear traffic is local, but something to be aware of.

  How is this, Mathieu?

• vSphere/vCenter client and web services

  Hello

  Don't vSphere client (or client to vCenter earlier) invoke web services of vSphere internally to perform operations on the ESX Server?

  I'm new to VMware developemnt.

  As I understand it, it's the client vSphere or vCenter is a management console. An actioan/operations such as create VMS or cloning images actually occur on the ESX servers or hosts. Web services are hosted on the ESX servers. When we perform an action via client vSphere/vCenter (e.g. create the VM), internally, it would be invoking appropriate API provided by the web service SDKto do you need.

  My understanding is correct?

  If you connect to vCenter or ESX host (i) themselves by using the Client vSphere, the majority of applications using vSphere API... I say majority because I do not know there are undocumented more that VMware uses behind the scenes, but in general, it is true. If you perform an operation in vCenter and it applies to a host, vCenter will communicate this request to the host.

  If you're new to QALY/SDK: you can spend the time to enter the section "Learning" of the developer forums, there is lots of useful information here: http://communities.vmware.com/community/developer/learn

  Here's a great doc Getting Started with vSphere SDK - Update for SDK 4.1 release that has a lot of information/explanations on how it all works, you should spend time passing on it and then ask questions in the appropriate follow-up, if you need more detailed explanation.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Game-CDDrive operation is not valid due to the current state of the object.

  It's been a while, please remind me how to put the code here? PSVersion 5.0.10105.0 VMWare PowerCLI AutoDeploy component 6.0 build 2358282 VMWare ImageBuilder PowerCLI component 6.0 build 2358282 license of VMware PowerCLI component 6.0 build 2315846 VMware vSphere PowerCLI component 6.0 build 2548068 VMware VDS PowerCLI component 6.0 build 2548068 Cloud of VMware Infrastructure Suite PowerCLI component 6.0 build 2548068 VMware HA PowerCLI component 6.0 build 2510422 VMware PowerCLI component Storage Management 6.0 build 2522368 trying to build a server from the ground using Powercli. Started with:

  $paramVM = @{

  VMHost =   $vmhost

  Version =   "v7"

      Name  =   "CompVM"

  Data store = $datastore

  DiskGB =   50

  DiskStorageFormat = "EagerZeroedThick"

  MemoryGB =   4

  NumCpu =   1

  Location =   $Folder

      CD  =   $true

  ResourcePool = $ResourcePool

  PortGroup = $portGroup

  Notes = "DC of DOM"

  Confirm =   $false

  }

  $paramVM . Location | select *

  New-VM @paramVM

  It seemed to go very well.

  Get-VM svr01mid100 | Start-VM

  Then, something isn't quite right.

  $paramNA = @{

  StartConnected =   $true

  WakeOnLan =   $true

  Connected =   $true

      Type  = « Vmxnet3 »

  Confirm =   $false

  }

  Get-VM chi01osm300 | Get-NetworkAdapter | Set-NetworkAdapter @paramNA

  , I get the error: Set-NetworkAdapter: 29/07/2015-18:44:36 Set-NetworkAdapter operation is not valid due to the current state of the object. Online: 9 char: 43 + Get - VM svr01mid100 | Get-NetworkAdapter | Together-NetworkAdapter @paramNA + ~ ~ ~ + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter MacAddress: 00:10:56:ss:3f:ab WakeOnLanEnabled: true NetworkName: SameAsAbove Type: Vmxnet3 ParentId: VirtualMachine - vm - 108361 Parent: svr01mid100 Uid: /VIServer = Dom\[email protected]: 443/VirtualMachine = VirtualMachine-vm-108361/NetworkAdapter = 4000 / ConnectionState: logged, NoGuestControl, StartConnected ExtensionData: VMware.Vim.VirtualVmxnet3 Id: VirtualMachine-vm-108361/4000 name: NIC 1 Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient )

  Get-VM svr01mid100 | Get-CDDrive | Select Name,IsoPath

  Name IsoPath - CD/DVD drive 1 C:\ PS > Get - VM svr01mid100 | Get-CDDrive. Game-CDDrive - IsoPath $isoPath - StartConnected $true - confirm: $false Set-CDDrive: 29/07/2015-18:50:39 Set-CDDrive operation is not valid due to the current state of the object. I disconnected and then reconnected my session. I tried to see what was going on in vCenter (which I never do) and I fount it tries to start with the ISO, but giving a frown face and reboot again. I think that he did not like something in the build of the server. Help!

  I don't know that I did it is clear enough. The new VM script seems to work, it creates a new virtual machine.

  But eventually, every setting change that I try to do on the virtual machine, I get an error stating that "the operation is not valid due to the current state of the object."

  It seems to take the configuration but then I noticed he tried to start, but it started getting the error that I put in the screenshot.

  To me, that shows that it is trying to boot from the CD, because it is a Windows error.  Moreover, he just trying to start several times.

  Now, I went back and I think that the error "operation is not valid due to the current state of the object" may have been the fact that the VM tried to boot from the CD over and over, this is what is meant by the current state.

  I noticed just here, the hosts have 4.1 on them, which does not support r2 Server 2012.

  I think we're good.  Thank you!

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• State of the host material do not display data

  Hi all

  We performed a clean installation of ESX 6 on an IBM X 3690 X 5 7148 which has the latest firmware updates.  Host State sensors display all the information.  The CIM service is running, and I can't find the custom drivers or vib files to apply to the host.

  Any suggestions?

  Thank you

  Hello

  To work around this problem, assign groups and accounts administrative user to the global permissions in the Web Client vSphere. To assign these permissions:

  1. Log the vSphere Web Client with the [email protected] or an account with SINGLE sign-on administrator privileges.
  2. Navigate to Administration > global permissions.
  3. Click on the Manage tab.
  4. Click on the + icon to open the root of global permissions .
  5. Click on Add.
  6. From the drop of the domain , select your domain name respective who holds the user or the group.
  7. After you locate the Group and press Add, click OK. Make sure that the user account is assigned the administrator role
  8. Click OK.

  Link KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2112847

  Please see the steps above and follow with your comments.

  Thank you

• How to upgrade the hardware on a VCenter Server

  In lab environment, two hosts, VCenter server, don't HA, storage etc. running share. I managed to upgrade hosts, using Crossover, but his declaration of errors when attempting to upgrade the hardware of server VCenter comments... I can see that it would be a problem, using VCenter to upgrade equipment on himself, when he needs to reboot the server to install. The question is, how to get around that? I tried to look for solutions, not found anything yet. Hope that makes sense.

  Latest versions of everything, as it is a laboratory under eval licenses. Thank you

  You must turn off the VM, connection to the ESXi host through vSphere client vCenter and right-click on the VM vCenter > virtual hardware upgrade.

  Make sure that you run VMware tools before do you.

• State of the material is not displayed

  Hello!

  I have a virtual environment with 3 HP G7 host

  A 8 GB RAM Module on one of them went bad and I had to move all virtual machines to another host 2 and who stop and replace the ram.

  then he returned and works well.

  but the problem is that I can't see any hosts to vCenter, State of the material

  It is said

  No new data available host. data will be updated in 5 minutes (but it used)

  I tried to reset the sensors and update but no luck

  When I click on reset sensors I get this message

  Sensor host data are not updated. The service request is not available or has been restarted please try again

  I restarted the hosts and the cVenter but still problem exists.

  any help would be appreciated.

  Hello

  1 stop the vCenter inventory service

  2 - remove all the contents of C:\Program Files\VMware\Infrastructure\Inventory Service\data

  3 - go to C:\Program Files\VMware\Infrastructure\Inventory Service\scripts\ and run createDB.bat

  4 - run register.bat with your server name. FQDN Register.bat 443

  5 start the vCenter inventory service.

• Can not put date format as "yyyy-MM-dd" for Chinses (PRC) and English (United States) at the same time. Win 7 PRO

  Step 1. I choose Chinese (PRC) in the list format (region and language) and set the format of 'YYYY-MM-dd' date, apply. It is ok.

  Step 2. I choose English (United States) in the list format (region and language) and set the format of 'YYYY-MM-dd' date, apply. It is ok.

  Step 3. I chose the back to Chinese (PRC) in the format list (region and language), format date is reset to "YYYY/M/d", it is not ok for me.

  How can I set the format of a two language. ?

  Because I use the siemens industry software, when to change language it will read the date format different from the language that is displayed. My client want to see the same format.

  I tested under Win XP, it may set the format even in different languages

  Hi Jerry,

  Thanks for posting the request in Microsoft Community Forums.

  It is normal that you can not set the same date format for both languages at the same time. You will need to use the drop-down list to choose a date format customized if necessary.

  Hope this information helps.

• VPN site2site & VPN client dailin on the question of a single interface

  Hello dear colleagues,

  First of all, the question of information subsequently:

  Setup

  C2801 race

  (C2801-ADVENTERPRISEK9-M), Version 12.4 (25f)

  ----------                                                    ----------

  | Central | Di1 IP:80.153.xxx.xxx | DISTANCE | IP: 91.218.xxx.xxx

  | Router | <----------------------------------------->     | Router |

  -IPsec via GRE Tu1 - works | Debian |

  ^                                                   |          |

  |                                                     ----------

  |    does not work

  |---------------------------------------->-------------------

  | Cisco VPN | Intellectual property: all

  | Customer |

  -------------------

  !

  AAA authentication login default local activate

  AAA authentication login local VPN_Users

  RADIUS group AAA authorization network default authenticated if

  AAA authorization VPN_Users LAN

  !

  AAA - the id of the joint session

  iomem 20 memory size

  clock timezone THIS 1

  clock summer-time EST recurring last Sun Mar 02:00 last Sun Oct 03:00

  IP cef

  !

  username myVPN secret 5

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  life 3600

  address key crypto isakmp xauth No. 91.218.xxx.xxx

  ISAKMP crypto nat keepalive 20

  !

  Configuration group customer isakmp crypto VPN_dialin

  key

  DNS 192.168.198.4

  domain example.com

  pool VPN

  ACL VPN

  Crypto isakmp VPNclient profile

  match of group identity VPN_dialin

  client authentication list VPN_Users

  ISAKMP authorization list VPN_Users

  client configuration address respond

  !

  Crypto ipsec security association idle time 3600

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac hostb-transform

  transport mode

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA-LZS, hmac-sha-esp esp - aes comp-lzs

  !

  !

  crypto dynamic-map vpn-dynamic-map 10

  game of transformation-ESP ESP-AES-128-SHA-AES-128-SHA-LZS

  Define VPNclient isakmp-profile

  !

  !

  !

  HostB-cryptomap 1 ipsec-isakmp crypto map

  the value of 91.218.xxx.xxx peer

  the transform-set hostb-transform value

  PFS group2 Set

  corresponds to hostb-address list

  !

  dynamic map crypto hostb-crytomap 65535-isakmp ipsec vpn-dynamic-map

  !

  !

  !

  !

  !

  !

  Tunnel1 interface

  bandwidth 100000

  IP vrf forwarding vl199

  IP 10.0.201.2 255.255.255.0

  IP 1400 MTU

  IP nat inside

  IP virtual-reassembly

  IP ospf network point

  source of Dialer1 tunnel

  destination 91.218.xxx.xxx tunnel

  bandwidth tunnel pass 10000

  bandwidth tunnel receive 50000

  !

  interface Dialer1

  Description # PPPoE T-Online.

  MTU 1492

  bandwidth 50000

  IP ddns update hostname it-s - dd.dyndns.org

  IP ddns update it-s-dd_dyndns_org

  the negotiated IP address

  NAT outside IP

  IP virtual-reassembly max-pumping 512

  encapsulation ppp

  IP tcp adjust-mss 1452

  no ip mroute-cache

  Dialer pool 1

  Dialer idle-timeout 0

  persistent Dialer

  KeepAlive 20

  No cdp enable

  Authentication callin PPP chap Protocol

  PPP chap hostname

  PPP chap password 7

  PPP pap sent-username password 7

  PPP ipcp dns request

  card crypto hostb-cryptomap

  Crypto ipsec fragmentation after encryption

  !

  !

  local pool IP VPN 192.168.196.30 192.168.196.60

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 Dialer1 track 1

  IP route 0.0.0.0 0.0.0.0 Tunnel1 20 Track3

  IP route 0.0.0.0 0.0.0.0 Dialer1 254

  IP route vrf vl199 0.0.0.0 0.0.0.0 192.168.1.251

  IP route vrf vl99 0.0.0.0 0.0.0.0 192.168.3.1

  !

  The dns server IP

  !

  no ip address of the http server

  no ip http secure server

  TCP-time translation nat IP 3600

  translation of nat IP udp-timeout 600

  IP nat Pat_for_192.168.198.4 192.168.198.4 pool 192.168.198.4 netmask 255.255.255.0 type

  IP nat Pat_for_192.168.200.50 192.168.200.50 pool 192.168.200.50 netmask 255.255.255.0 type

  IP nat inside source static 5060 udp interface 192.168.200.50 Dialer1 5060

  IP nat inside source static tcp 192.168.200.51 3389 3389 Dialer1 interface

  IP nat inside source static tcp 192.168.198.4 3389 interface Dialer1 3390

  IP nat inside source static tcp 192.168.198.9 interface 5000 Dialer1 5000

  IP nat inside source overload map route dialer1 interface Dialer1

  IP nat inside interface 13001 static udp 192.168.199.3 source Dialer1 13001

  IP nat inside interface 32768 static udp 192.168.179.2 source Dialer1 32768

  IP nat inside source static udp 192.168.179.2 Dialer1 49152 49152 interface

  IP nat inside interface 64206 static udp 192.168.179.2 source Dialer1 64206

  IP nat inside source static udp 192.168.179.2 interface 7597 Dialer1 7597

  IP nat inside source static tcp 192.168.179.2 9998 interface Dialer1 9998

  IP nat inside source static tcp 192.168.179.2 7597 interface Dialer1 7597

  IP nat inside source static tcp 192.168.179.2 64206 interface Dialer1 64206

  IP nat inside source static tcp 192.168.179.2 Dialer1 49152 49152 interface

  IP nat inside source static tcp 192.168.179.2 Dialer1 32768 32768 interface

  IP nat inside source static tcp 192.168.198.4 interface 443 443 Dialer1

  IP nat inside destination list Pat_for_192.168.198.4 pool Pat_for_192.168.198.4

  IP nat inside destination list Pat_for_192.168.200.50 pool Pat_for_192.168.200.50

  !

  Pat_for_192.168.198.4 extended IP access list

  Note = Pat_for_192.168.198.4 =-

  permit tcp any any eq www

  permit tcp any any eq 987

  permit tcp any any eq 143

  permit tcp any any eq 993

  permit tcp any any eq pop3

  permit tcp any any eq 995

  permit tcp any any eq 587

  permit tcp any any eq ftp

  permit tcp any any eq ftp - data

  permit tcp any any eq smtp

  Pat_for_192.168.200.50 extended IP access list

  Note = Pat_for_192.168.200.50 =-

  allow udp everything any 10000 20000 Beach

  permit tcp everything any 5222 5223 Beach

  allow udp any any eq 4569

  permit any any eq 5060 udp

  list of IP - VPN access scope

  IP 192.168.198.0 allow 0.0.0.255 192.168.196.0 0.0.0.255

  permit ip host 80.153.xxx.xxx 192.168.196.0 0.0.0.255

  list hostb extended IP access list

  permit ip host 91.218.xxx.xxx host 80.153.xxx.xxx

  permit ip host 80.153.xxx.xxx host 91.218.xxx.xxx

  permit ip host 10.0.201.2 10.0.201.1

  !

  !

  access-list 10 permit 192.168.200.6

  access-list 100 permit ip 192.168.0.0 0.0.255.255 everything

  access-list 100 permit ip 10.1.0.0 0.0.255.255 everything

  access-list 100 permit ip 10.0.0.0 0.0.255.255 everything

  access-list 101 permit ip 192.168.199.3 host everything

  access-list 101 permit ip 192.168.199.4 host everything

  access-list 101 permit ip 192.168.199.13 host everything

  access-list 101 permit ip 192.168.199.14 host everything

  access list 101 ip allow any host 204.13.162.123

  access-list 103 allow ip 10.0.1.0 0.0.0.255 any

  !

  dialer1 allowed 10 route map

  corresponds to the IP 100

  match interface Dialer1

  !

  !

  ####################################################################################################

  SH crypto isakmp his:

  status of DST CBC State conn-id slot

  91.218.xxx.xxx 80.153.xxx.xxx QM_IDLE 7 0 ACTIVE

  80.153.248.167 QM_IDLE 12 0 ASSETS

  ######################################################################################

  SH encryption session

  Current state of the session crypto

  Interface: Virtual-Access5

  The session state: down

  Peer: port of 91.218.xxx.xxx 500

  FLOW IPSEC: allowed ip host 10.0.201.2 10.0.201.1

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 80.153.xxx.xxx host 91.218.xxx.xxx

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 91.218.xxx.xxx host 80.153.xxx.xxx

  Active sAs: 0, origin: card crypto

  Interface: Dialer1

  The session state: UP-NO-IKE

  Peer: port of 91.218.xxx.xxx 500

  IKE SA: local 80.153.xxx.xxx/500 remote 91.218.xxx.xxx/500 inactive

  FLOW IPSEC: allowed ip host 10.0.201.2 10.0.201.1

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 80.153.xxx.xxx host 91.218.xxx.xxx

  Active sAs: 4, origin: card crypto

  FLOW IPSEC: allowed ip host 91.218.xxx.xxx host 80.153.xxx.xxx

  Active sAs: 0, origin: card crypto

  Interface: Dialer1

  The session state: IDLE-UP

  Peer: port of 55033

  ITS IKE: local 80.153.xxx.xxx/4500 distance 55033 Active

  ################################################################################################################################

  Error message:

  020932: 2 Oct 21:55:14.459 CEST: IPSEC (validate_transform_proposal): No IPSEC cryptomap is to address local 80.153.xxx.xxx

  020933: 2 Oct 21:55:14.459 CEST: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 80.153.xxx.xxx, distance =,.

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 192.168.196.32/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = esp - esp-md5-hmac (Tunnel-UDP).

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 400

  020934: 2 Oct 21:55:14.459 CEST: IPSEC (validate_transform_proposal): No IPSEC cryptomap is to address local 80.153.xxx.xxx

  020935: 2 Oct 21:55:14.459 CEST: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 80.153.xxx.xxx, distance = ,.

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 192.168.196.32/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = null esp esp-md5-hmac (Tunnel-UDP).

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 400

  #################################################################################################

  I tried to understand where is my mistake, can someone help me find it?

  Thank you very much

  concerning

  crypto map hostb-crytomap 65535 ipsec-isakmp dynamic vpn-dynamic-map
  

  is the fault of typing in the name as in your original config?

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• my shortcut folders disappear and I can't disable the cleanup of unused shortcuts on the new computer windows 7

  my shortcut folders disappear and I can't disable the cleanup of unused shortcuts on the new computer windows 7

  I have a lot of shortcuts I need readily available and it is very annoying when they disappear without my wanting to do.  I spent hours looking for an answer and I can't change the setting on the maintenance of the system 'clean up unused and shortcuts files' - but some missing I have used very recently - in the last week - so no reason for them to be cleaned - I tink im going to send this back stupid computer and get an Apple!

  I never had this problem with windows XP - windows 7 is rubbish if I can't disable this fundamental thing.

  Hello

  Have you made changes before the start of this issue?

  Method 1: The desktop shortcuts disappear in Windows 7

  http://support.Microsoft.com/kb/978980

  Method 2:

  Step 1: You can check if the same problem occurs in safe mode with network.

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Let us know if that helps.

• Content-based client will eliminate the need for content management?

  With the ongoing (and valid) push to have clients generate content, the role of Manager/Director content will disappear? Content strategy will fall to those who focus on customer communities/advocacy?

  So more and more I look at the role of curation of content as an important skill to emerge.  With so many sources of information I gravitate to places/people that will help cut through the clutter of the reliable recommendations.  I feel like a good example of this is photo.  I feel like it came out of nowhere, but is now a source of information for me, even if they are not the original source of all there.  I am much more likely to click on something from them than others because she constantly lives up to the promise of a story very interesting and consumable.  In my view, it must always be according to the preponderance of the created, curated, and content to ensure balanced user generated.  Your audience will have different types through different stages of their life cycle.