VPN site2site & VPN client dailin on the question of a single interface
Hello dear colleagues,
First of all, the question of information subsequently:
Setup
C2801 race
(C2801-ADVENTERPRISEK9-M), Version 12.4 (25f)
---------- ----------
| Central | Di1 IP:80.153.xxx.xxx | DISTANCE | IP: 91.218.xxx.xxx
| Router | <-----------------------------------------> | Router |
-IPsec via GRE Tu1 - works | Debian |
^ | |
| ----------
| does not work
|---------------------------------------->-------------------
| Cisco VPN | Intellectual property: all
| Customer |
-------------------
!
AAA authentication login default local activate
AAA authentication login local VPN_Users
RADIUS group AAA authorization network default authenticated if
AAA authorization VPN_Users LAN
!
AAA - the id of the joint session
iomem 20 memory size
clock timezone THIS 1
clock summer-time EST recurring last Sun Mar 02:00 last Sun Oct 03:00
IP cef
!
username myVPN secret 5
! ! crypto ISAKMP policy 1 BA 3des preshared authentication Group 2 life 3600 address
ISAKMP crypto nat keepalive 20 ! Configuration group customer isakmp crypto VPN_dialin key
DNS 192.168.198.4 domain example.com pool VPN ACL VPN Crypto isakmp VPNclient profile match of group identity VPN_dialin client authentication list VPN_Users ISAKMP authorization list VPN_Users client configuration address respond ! Crypto ipsec security association idle time 3600 ! Crypto ipsec transform-set esp-3des esp-sha-hmac hostb-transform transport mode Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac Crypto ipsec transform-set ESP-AES-128-SHA-LZS, hmac-sha-esp esp - aes comp-lzs ! ! crypto dynamic-map vpn-dynamic-map 10 game of transformation-ESP ESP-AES-128-SHA-AES-128-SHA-LZS Define VPNclient isakmp-profile ! ! ! HostB-cryptomap 1 ipsec-isakmp crypto map the value of 91.218.xxx.xxx peer the transform-set hostb-transform value PFS group2 Set corresponds to hostb-address list ! dynamic map crypto hostb-crytomap 65535-isakmp ipsec vpn-dynamic-map ! ! ! ! ! ! Tunnel1 interface bandwidth 100000 IP vrf forwarding vl199 IP 10.0.201.2 255.255.255.0 IP 1400 MTU IP nat inside IP virtual-reassembly IP ospf network point source of Dialer1 tunnel destination 91.218.xxx.xxx tunnel bandwidth tunnel pass 10000 bandwidth tunnel receive 50000 ! interface Dialer1 Description # PPPoE T-Online. MTU 1492 bandwidth 50000 IP ddns update hostname it-s - dd.dyndns.org IP ddns update it-s-dd_dyndns_org the negotiated IP address NAT outside IP IP virtual-reassembly max-pumping 512 encapsulation ppp IP tcp adjust-mss 1452 no ip mroute-cache Dialer pool 1 Dialer idle-timeout 0 persistent Dialer KeepAlive 20 No cdp enable Authentication callin PPP chap Protocol PPP chap hostname
PPP chap password 7
PPP pap sent-username
PPP ipcp dns request card crypto hostb-cryptomap Crypto ipsec fragmentation after encryption ! ! local pool IP VPN 192.168.196.30 192.168.196.60 IP forward-Protocol ND IP route 0.0.0.0 0.0.0.0 Dialer1 track 1 IP route 0.0.0.0 0.0.0.0 Tunnel1 20 Track3 IP route 0.0.0.0 0.0.0.0 Dialer1 254 IP route vrf vl199 0.0.0.0 0.0.0.0 192.168.1.251 IP route vrf vl99 0.0.0.0 0.0.0.0 192.168.3.1 ! The dns server IP ! no ip address of the http server no ip http secure server TCP-time translation nat IP 3600 translation of nat IP udp-timeout 600
IP nat Pat_for_192.168.198.4 192.168.198.4 pool 192.168.198.4 netmask 255.255.255.0 type
IP nat Pat_for_192.168.200.50 192.168.200.50 pool 192.168.200.50 netmask 255.255.255.0 type
IP nat inside source static 5060 udp interface 192.168.200.50 Dialer1 5060
IP nat inside source static tcp 192.168.200.51 3389 3389 Dialer1 interface
IP nat inside source static tcp 192.168.198.4 3389 interface Dialer1 3390
IP nat inside source static tcp 192.168.198.9 interface 5000 Dialer1 5000
IP nat inside source overload map route dialer1 interface Dialer1
IP nat inside interface 13001 static udp 192.168.199.3 source Dialer1 13001
IP nat inside interface 32768 static udp 192.168.179.2 source Dialer1 32768
IP nat inside source static udp 192.168.179.2 Dialer1 49152 49152 interface
IP nat inside interface 64206 static udp 192.168.179.2 source Dialer1 64206
IP nat inside source static udp 192.168.179.2 interface 7597 Dialer1 7597
IP nat inside source static tcp 192.168.179.2 9998 interface Dialer1 9998
IP nat inside source static tcp 192.168.179.2 7597 interface Dialer1 7597
IP nat inside source static tcp 192.168.179.2 64206 interface Dialer1 64206
IP nat inside source static tcp 192.168.179.2 Dialer1 49152 49152 interface
IP nat inside source static tcp 192.168.179.2 Dialer1 32768 32768 interface
IP nat inside source static tcp 192.168.198.4 interface 443 443 Dialer1
IP nat inside destination list Pat_for_192.168.198.4 pool Pat_for_192.168.198.4
IP nat inside destination list Pat_for_192.168.200.50 pool Pat_for_192.168.200.50
!
Pat_for_192.168.198.4 extended IP access list
Note = Pat_for_192.168.198.4 =-
permit tcp any any eq www
permit tcp any any eq 987
permit tcp any any eq 143
permit tcp any any eq 993
permit tcp any any eq pop3
permit tcp any any eq 995
permit tcp any any eq 587
permit tcp any any eq ftp
permit tcp any any eq ftp - data
permit tcp any any eq smtp
Pat_for_192.168.200.50 extended IP access list
Note = Pat_for_192.168.200.50 =-
allow udp everything any 10000 20000 Beach
permit tcp everything any 5222 5223 Beach
allow udp any any eq 4569
permit any any eq 5060 udp
list of IP - VPN access scope
IP 192.168.198.0 allow 0.0.0.255 192.168.196.0 0.0.0.255
permit ip host 80.153.xxx.xxx 192.168.196.0 0.0.0.255
list hostb extended IP access list
permit ip host 91.218.xxx.xxx host 80.153.xxx.xxx
permit ip host 80.153.xxx.xxx host 91.218.xxx.xxx
permit ip host 10.0.201.2 10.0.201.1
!
!
access-list 10 permit 192.168.200.6
access-list 100 permit ip 192.168.0.0 0.0.255.255 everything
access-list 100 permit ip 10.1.0.0 0.0.255.255 everything
access-list 100 permit ip 10.0.0.0 0.0.255.255 everything
access-list 101 permit ip 192.168.199.3 host everything
access-list 101 permit ip 192.168.199.4 host everything
access-list 101 permit ip 192.168.199.13 host everything
access-list 101 permit ip 192.168.199.14 host everything
access list 101 ip allow any host 204.13.162.123
access-list 103 allow ip 10.0.1.0 0.0.0.255 any
!
dialer1 allowed 10 route map
corresponds to the IP 100
match interface Dialer1
!
!
####################################################################################################
SH crypto isakmp his:
status of DST CBC State conn-id slot
91.218.xxx.xxx 80.153.xxx.xxx QM_IDLE 7 0 ACTIVE
80.153.248.167
###################################################################################### SH encryption session Current state of the session crypto Interface: Virtual-Access5 The session state: down Peer: port of 91.218.xxx.xxx 500 FLOW IPSEC: allowed ip host 10.0.201.2 10.0.201.1 Active sAs: 0, origin: card crypto FLOW IPSEC: allowed ip host 80.153.xxx.xxx host 91.218.xxx.xxx Active sAs: 0, origin: card crypto FLOW IPSEC: allowed ip host 91.218.xxx.xxx host 80.153.xxx.xxx
Active sAs: 0, origin: card crypto
Interface: Dialer1
The session state: UP-NO-IKE
Peer: port of 91.218.xxx.xxx 500
IKE SA: local 80.153.xxx.xxx/500 remote 91.218.xxx.xxx/500 inactive
FLOW IPSEC: allowed ip host 10.0.201.2 10.0.201.1
Active sAs: 0, origin: card crypto
FLOW IPSEC: allowed ip host 80.153.xxx.xxx host 91.218.xxx.xxx
Active sAs: 4, origin: card crypto
FLOW IPSEC: allowed ip host 91.218.xxx.xxx host 80.153.xxx.xxx
Active sAs: 0, origin: card crypto
Interface: Dialer1
The session state: IDLE-UP
Peer: port of
ITS IKE: local 80.153.xxx.xxx/4500 distance
################################################################################################################################ Error message:
020932: 2 Oct 21:55:14.459 CEST: IPSEC (validate_transform_proposal): No IPSEC cryptomap is to address local 80.153.xxx.xxx
020933: 2 Oct 21:55:14.459 CEST: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 80.153.xxx.xxx, distance =
local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4), remote_proxy = 192.168.196.32/255.255.255.255/0/0 (type = 1), Protocol = ESP, transform = esp - esp-md5-hmac (Tunnel-UDP). lifedur = 0 and 0kb in SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 400 020934: 2 Oct 21:55:14.459 CEST: IPSEC (validate_transform_proposal): No IPSEC cryptomap is to address local 80.153.xxx.xxx 020935: 2 Oct 21:55:14.459 CEST: IPSEC (validate_proposal_request): part #1 of the proposal (Eng. msg key.) Local INCOMING = 80.153.xxx.xxx, distance =
local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4), remote_proxy = 192.168.196.32/255.255.255.255/0/0 (type = 1), Protocol = ESP, transform = null esp esp-md5-hmac (Tunnel-UDP). lifedur = 0 and 0kb in SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 400 ################################################################################################# I tried to understand where is my mistake, can someone help me find it? Thank you very much concerning crypto map hostb-crytomap 65535 ipsec-isakmp dynamic vpn-dynamic-map is the fault of typing in the name as in your original config? -- Tags: Cisco Security VPN client can get the gateway? I have a question for a long time. Cisco vpn client will find a gateway to the remote vpn server address. There are many situations in which we need a gateway assigned to the vpn client. If the customer can freely access all private networks. PIX of Cisco router has this feature? Why the customer would need a bridge tunnel? The customer already has a gateway of the ISP. Once the tunnel is up, if not to do split tunneling, all customer traffic will be sent on to the CONCENTRATOR's IPSec tunnel. So, indeed, the HUB is the default gateway. If you use the split tunneling, then your ACL will say what customer traffic must be encrypted on the tunnel on the hub. All other traffic is sent clear for the ISP. So, indeed, the HUB is the gateway for the LAN within the tunnel. There is a featur default on the 3000 gateway Tunnel, but that's for a different purpose Installation of VM with VPN client access to the network local provents What is the best approach for the connection to the VPN in the following scenario? We want to install VM for our projects as VPN client networking (using the cisco vpn client). In many cases the VPN profile that is configured by the client is configured to prevent access to the local network, but rather the tunnels all through the VPN. I tried the NAT and Bridged networks and once you connect to the VPN client, the conectitivy of the virtual machine is limited to the VMWare console. SSH and other connections no longer work. Thanks for any idea. I'd VNC - that's what I use for a VM XP that uses the client VPN SecuRemote CheckPoint blocking the same way (wisely) off incoming traffic when the connection is made to the other end of the VPN. Just paste lines similar to the following in your .vmx file when the virtual machine is shut down: RemoteDisplay.vnc.enabled = TRUE Note that you point your VNC client software on the IP address (and port of your .vmx file) to your server 2.0, not the virtual machine host. Use a different port for each computer virtual you need simultaneous to access. Cisco vpn client minimized in the taskbar and the rest in status: disconnect I used 5.0.07.0240 cisco vpn client for 1 month with my pc under windows 7-64 bit. Worked well for 1 month. All of a sudden now when I double click the icon to start, VPN automatically minimizes to the taskbar with the disconnected state. It does not connect the option to hit or anything before it reduced to a minimum. I've not seen this before and no changes... but now it simply doesn't work. All solutions? Windows just patch automatically breaking cisco? Barb Bowman www.digitalmediaphile.com We use the PIX 515E (ver 6.2 (2)) like a VPN for remote users solution. The PIX uses OF and does not have the license for 3DES. Remote users have no problems to access the PIX using Cisco VPN Client 3.5.2 but cannot access using Cisco VPN Client 3.6.3. When I went on the website to download the new client (3.6.20, he mentions that there's 3DES. The new customer is not step in if that is what sustains the PIX? Thank you 3.6 client introduces features for AES encryption. Unfortunately, they had to drop some types of existing encryption of the client to respond to this. From the release notes (http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/3_6/361_clnt.htm), you'll see that SHA/DES is no longer supported / offered by the customer, so if you have the following line in your PIX: > crypto ipsec transform-set esp - esp-sha-hmac then you will need to: > crypto ipsec transform-set esp - esp-md5-hmac Customer step in, it just does not DES/SHA more. Vpn client access to the DMZ host I'm having a problem where my customers who establish a VPN with Pix 515 cannot access hosts on the DMZ. VPN clients can access hosts inside network without any problems. I discovered that when I make a route to trace from a client computer that has established a VPN connection to a host on the DMZ, he tries to go through the default gateway of computers instead of the client from cisco. Any ideas? More information: When a client connects with the PIX over the VPN, it is given the internal DNS servers and the DNS Server internal, we have a host entry that says "www.whatever.com" 2.2.2.2 (this is the DMZ host). Customers within the network can access this host with problems, it's just the customers who establish a VPN connection. But the VPN Clients can access "www.whatever.com" using the public ip address. The problem is that if remove us the entry from the host on the DNS server so that the name of "www.whatever.com" decides the public ip address customers inside will not be able to access the DMZ host. The names and IP numbers are not real just using those as an example. Any help would be apperciated. Thank you You'll currently have something like this in your config file: sheep allowed ip access-list NAT (inside) 0 access-list sheep This tells the PIX not to NAT any traffic from inside interface, which is to go to a VPN client. You need the same thing but for the DMZ interface, then add the following: sheep allowed ip access-list NAT 0 access-list sheep (dmz) Who should you get. Cisco VPN Client - what are the ports I need to open the 1841? Hello. As it says on the Tin really, what are the ports I need to allow my access on our 1841 list to allow the Cisco VPN client on through it? Ta UDP 500 (isakmp) UDP 4500 (nat - t) Protocol ESP 50 [SOLVED] Native Iphone4s Cisco VPN client cannot establish the tunnel (victory clients do) Hello IPhone 4 s last IOS5 V 5.1.1 installed I'm not able to make the native IPSEC VPN connection upset my company Cisco 877 Instead, all my computer laptop and netbook with Cisco VPN Client work installed fine when they connect remotely to society 877 Turn debugging 877, it seems Iphone successfully passes the 1 connection ike (actually Iphone wonder phase2 user/pass), but it hung to phase2 give me the error 'Negotiation with the VPN server has no' back An idea or a known issue on this? This is how I configured my VPN 877 part: R1 (config) # aaa new-model R1 (config) # aaa authentication default local connection R1 (config) # aaa authentication login vpn_xauth_ml_1 local R1 (config) # aaa authentication login local sslvpn R1 (config) # aaa authorization network vpn_group_ml_1 local R1 (config) # aaa - the id of the joint session Crypto isakmp policy of R1 (config) # 1 R1(config-ISAKMP) # BA 3des # Preshared authentication R1(config-ISAKMP) Group R1(config-ISAKMP) # 2 R1(config-ISAKMP) #. R1(config-ISAKMP) #crypto isakmp policy 2 R1(config-ISAKMP) # BA 3des Md5 hash of R1(config-ISAKMP) #. # Preshared authentication R1(config-ISAKMP) Group R1(config-ISAKMP) # 2 Output R1(config-ISAKMP) #. R1 (config) # CUSTOMER - VPN crypto isakmp client configuration group R1(config-ISAKMP-Group) # key xxxxxxxx R1(config-ISAKMP-Group) # 192.168.0.1 dns R1(config-ISAKMP-Group) # VPN - pool ACL R1(config-ISAKMP-Group) # 120 R1(config-ISAKMP-Group) max-users # 5 Output R1(config-ISAKMP-Group) #. R1 (config) # ip local pool VPN-pool 192.168.0.20 192.168.0.25 R1 (config) # crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac R1 (config) # crypto ipsec VPN-profile-1 profile R1(IPSec-Profile) # set the transform-set encrypt method 1 Tunnel type interface virtual-Template2 R1 (config) #. R1(Config-if) # ip unnumbered FastEthernet0/0 R1(Config-if) # tunnel mode ipsec ipv4 Ipsec protection tunnel R1(Config-if) # VPN - profile - 1 profile Profile of R1 (config) # isakmp crypto vpn-ike-profile-1 R1(conf-ISA-Prof) # match group identity CUSTOMER VPN R1(conf-ISA-Prof) # vpn_xauth_ml_1 list client authentication R1(conf-ISA-Prof) # isakmp authorization list vpn_group_ml_1 R1(conf-ISA-Prof) # client configuration address respond R1(conf-ISA-Prof) virtual-model # 2 Then run AccessList 120 for desired traffic ("access-list 120 now allows ip any any") I have configured my VPN Cisco "CUSTOMER-VPN" clients and relative password Whenever they connect, they are prompted for the password and username phase2 then they join the VPN with an IP address from local subnet released. With the same parameters required and confirmed in section ipsec VPN Iphone it does not work. It's 877 isakmp debug output after that Iphone wonder name of user and password (then I suppose that phase 1 completed): * 14:29:30.731 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH * 14:29:30.735 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-1427983983 * 14:29:30.735 May 19: ISAKMP: Config payload RESPONSE * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_NAME_V2 attribute * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_PASSWORD_V2 attribute * 14:29:30.735 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason "made with Exchange of request/response xauth. * 14:29:30.735 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REPLY * 14:29:30.735 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_REQ_SENT = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT * 14:29:30.743 May 19: ISAKMP: node set 1322685842 to CONF_XAUTH * 19 May 14:29:30.747: ISAKMP: (2081): launch peer 151.38.197.143 config. ID = 1322685842 * 19 May 14:29:30.747: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_XAUTH * 14:29:30.747 May 19: ISAKMP: (2081): sending a packet IPv4 IKE. * 14:29:30.747 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN
* 14:29:30.747 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_AAA_CONT_LOGIN_AWAIT = IKE_XAUTH_SET_SENT * 14:29:31.299 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH * 14:29:31.299 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID = 1322685842 * 14:29:31.299 May 19: ISAKMP: Config payload ACK * 19 May 14:29:31.303: ISAKMP: (2081): XAUTH ACK processed
* 14:29:31.303 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE basis "Mode of Transaction. * 14:29:31.303 May 19: ISAKMP: (2081): talking to a customer of the unit * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_ACK * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_SET_SENT = IKE_P1_COMPLETE * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE * 19 May 14:29:31.303: IPSEC (key_engine): had an event of the queue with 1 KMI message (s) * 14:29:31.315 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE * 14:29:31.315 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE * 14:29:31.623 may 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE * 14:29:31.623 may 19: ISAKMP: node set-851463821 to QM_IDLE * 14:29:31.623 may 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-851463821 * 14:29:31.623 may 19: ISAKMP: Config payload REQUEST * 14:29:31.623 may 19: ISAKMP: (2081): verification of claim: * 14:29:31.623 may 19: ISAKMP: IP4_ADDRESS * 14:29:31.623 may 19: ISAKMP: IP4_NETMASK * 14:29:31.623 may 19: ISAKMP: IP4_DNS * 14:29:31.623 may 19: ISAKMP: IP4_NBNS * 14:29:31.623 may 19: ISAKMP: ADDRESS_EXPIRY * 14:29:31.623 may 19: ISAKMP: APPLICATION_VERSION * 14:29:31.623 may 19: ISAKMP: MODECFG_BANNER * 14:29:31.623 may 19: ISAKMP: domaine_par_defaut * 14:29:31.623 may 19: ISAKMP: SPLIT_DNS * 14:29:31.623 may 19: ISAKMP: SPLIT_INCLUDE * 14:29:31.623 may 19: ISAKMP: INCLUDE_LOCAL_LAN * 14:29:31.623 may 19: ISAKMP: PFS * 14:29:31.623 may 19: ISAKMP: MODECFG_SAVEPWD * 14:29:31.623 may 19: ISAKMP: FW_RECORD * 14:29:31.623 may 19: ISAKMP: serveur_sauvegarde * 14:29:31.623 may 19: ISAKMP: MODECFG_BROWSER_PROXY * 14:29:31.627 May 19: ISAKMP/author: author asks for CUSTOMER-VPNsuccessfully group AAA * 14:29:31.627 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST * 14:29:31.627 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_CONFIG_AUTHOR_AAA_AWAIT * 14:29:31.627 May 19: ISAKMP: (2081): attributes sent in the message: * 19 May 14:29:31.627: address: 0.2.0.0 * 19 May 14:29:31.627: ISAKMP: (2081):address of 192.168.0.21 assignment * 14:29:31.627 May 19: ISAKMP: sending private address: 192.168.0.21 * 14:29:31.627 May 19: ISAKMP: send the subnet mask: 255.255.255.0 * 14:29:31.631 May 19: ISAKMP: sending IP4_DNS server address: 192.168.0.1 * 14:29:31.631 May 19: ISAKMP: sending ADDRESS_EXPIRY seconds left to use the address: 3576 * 14:29:31.631 May 19: ISAKMP: string APPLICATION_VERSION sending: Cisco IOS software, software C870 (C870-ADVIPSERVICESK9-M), Version 12.4 (15) T7, VERSION of the SOFTWARE (fc3) Technical support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Updated Friday 14 August 08 07:43 by prod_rel_team * 14:29:31.631 May 19: ISAKMP: split shipment include the name Protocol 120 network 0.0.0.0 mask 0.0.0.0 0 src port 0, port 0 DST * 14:29:31.631 May 19: ISAKMP: sending save the password answer value 0 * 19 May 14:29:31.631: ISAKMP: (2081): respond to peer 151.38.197.143 config. ID =-851463821 * 19 May 14:29:31.631: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_ADDR * 14:29:31.631 May 19: ISAKMP: (2081): sending a packet IPv4 IKE. * 14:29:31.631 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason "error no.".
* 14:29:31.631 May 19: ISAKMP: (2081): talking to a customer of the unit * 14:29:31.631 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR * 14:29:31.631 May 19: ISAKMP: (2081): former State = new State IKE_CONFIG_AUTHOR_AAA_AWAIT = IKE_P1_COMPLETE * 14:29:31.635 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE * 14:29:31.635 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE Here the Iphone remains unused for a few seconds... * 14:29:48.391 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE * 14:29:48.391 May 19: ISAKMP: node set 1834509506 to QM_IDLE * 19 May 14:29:48.391: ISAKMP: (2081): HASH payload processing. Message ID = 1834509506 * 19 May 14:29:48.391: ISAKMP: (2081): treatment of payload to DELETE. Message ID = 1834509506
* 14:29:48.391 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive. * 14:29:48.395 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive. * 14:29:48.395 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143) * 14:29:48.395 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'informational (en) State 1. * 19 May 14:29:48.395: IPSEC (key_engine): had an event of the queue with 1 KMI message (s) * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): rec would notify of ISAKMP * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): remove all SAs shared with peer 151.38.197.143 * 14:29:48.395 May 19: ISAKMP: node set-1711408233 to QM_IDLE * 19 May 14:29:48.395: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) QM_IDLE * 14:29:48.395 May 19: ISAKMP: (2081): sending a packet IPv4 IKE. * 14:29:48.399 May 19: ISAKMP: (2081): purge the node-1711408233 * 14:29:48.399 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL * 14:29:48.399 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA * 14:29:48.399 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143) * 14:29:48.399 May 19: ISAKMP: (0): cannot decrement IKE Call Admission Control incoming_active stat because he's already 0. * 14:29:48.399 May 19: ISAKMP (0:2081): return address 192.168.0.21 to pool * 14:29:48.399 May 19: ISAKMP: Unlocking counterpart struct 0 x 84084990 for isadb_mark_sa_deleted(), count 0 * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool * 14:29:48.399 May 19: ISAKMP: delete peer node by peer_reap for 151.38.197.143: 84084990 * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool * 14:29:48.403 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason 'IKE deleted. * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE reason 'IKE deleted. * 14:29:48.403 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason 'IKE deleted. * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'IKE deleted. * 14:29:48.403 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH * 14:29:48.403 May 19: ISAKMP: (2081): former State = new State IKE_DEST_SA = IKE_DEST_SA * 19 May 14:29:48.403: IPSEC (key_engine): had an event of the queue with 1 KMI message (s) It seems 877 comes even to assign a local ip address of LAN for Iphone (192.168.0.21) but then something goes wrong... Any idea or suggestion on this? Thank you very much Hi Federico,. Please let us know. Please mark this message as answered while others will be able to learn the lessons. Thank you. Portu. VPN clients connecting to the site to site VPN Hi all I'm currently configured my firewall outside interface VPN closing the point for two clients VPN and Cisco VPN site-to-site. What I found is that when I Client VPN, I can't access the devices on the site-to-site VPN. I think that the PIX does not allow this kind of connections, because it requires routing on the same interface. Can someone point me to some docs on ORC who can help me in this situation. Thanks in advance for your help. the restriction has been resolved with pix v7, and the related command is "permit same-security-traffic intra-interface". How to prohibit remote access vpn client to use the local DNS server Hello I'm on ASA5505 remote access vpn configuration. Everything works fine so far, except when the client got connected, he always used the local DNS server provided by the ISP. How can I force the customer to use the DNS server configured on ASA? Thank you. Kind regards The command "Activate dns split-tunnel-all" is supported only on SSL VPN and VPN IKEv2. Since you're using IKEv1, this command is not supported. Here's the order reference: http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1533793 You configure no split tunnel? If you are, then you need to configure "tunnelall" split tunnel policy, and that will force the dns resolution and everything else through the VPN tunnel. Allow Cisco VPN Client through the firewall? Hello How can I allow a cisco VPN client work from the inside of our network to an external IP address? We have customers who wish to make use of their Cisco VPN Client companies but our ASA blocks I think? Also (sorry to ask) a friend in South America is having the same problem but I am not hink they use Cisco, is there a default port used by the client to Cisco? then I can send this info? Thank you Generally, the ASA will allow the IPSEC from the inside to outside traffic. This is when you want it came outside and connect to you - this is where it gets creative. You restrict outgoing traffic at all? You deny all ip/tcp/udp outgoing? But may depend on if the remote end is compaitable NAT - T, and if they have configured. Another question would be how they allow VPN traffic go? How to allow access to a local area network behind the cisco vpn client Hi, my question is about how to allow access to a local area network behind the cisco vpn client With the help of: Cisco VPN client allows to inject a local routes in the routing table Cisco ASA? Thank you. Hi Vladimir,. Unfortunately this is not a supported feature if you connect through the VPN Client. With VPN Client, that the VPN Client can access the VPN Client LAN host/local machine, not host from the local network to business as customer VPN is not designed for access from the local company network, but to the local corporate network. If you want to access from your local business to your LAN network, you need to configure LAN-to-LAN tunnel. IP address connection sets using the VPN Client Hello world. I'm using a VPN Client when I establish a VPN Tunnel with a 1600 router, and I have a question. Can I assign a fixed IP address in the client, instead the router send to random addresses from customer? What I would he do this? It would be in the configuration of the VPN client, or in the configuration of the router? If so, I'm doing this? Do I need another tool, or other software or hardware to do? any help is hope... Thank you... Hello I don't think that there is a simple way to do this. However, if you create a different groupname for the user who needs a static IP address, I think you should be good to go So what you need to do, create a new pool of addresses. Make the start and end ip address be the same (this is the address to which you want to assign to the VPN user) Configure another ipsec on the router group and bind the new pool to this group Ask your VPN client to connect to this group Hope that helps Jean Marc I use soft Cisco VPN client behind a Cisco CCCB router running. What are the ports must be opened to allow the client VPN working properly? I am currently using: allow an esp allow udp any any eq isakmp These are necessary, but you may also need to open UDP 10000 to support NAT - T if IPSec must cross a NAT border along its way. You'll also need allow beach access VPN client address to the IP address ranges whatever they are to be used in common. This is because packages through the ACL twice, once encrypted using ESP and ISAKMP, there not yet encrypted. So, if the VPN client has a range of pool to say 10.1.1.0/24 and his contact only the acl 10.2.0.0/16 subnet would look like: IP access-group extended VPNACCESS allow an esp allow udp any any eq isakmp permit IP 10.1.1.0 0.0.0.255 10.2.0.0 0.0.255.255 Andy Need a guide to configure the VPN Client Hello... I vpn in my 506th pix and I have ver.4.0.1 software vpn client installed on the other pc (on the outside). In the firewall, there are two types of vpn; VPN site to site and remote vpn access. We use vpn for remote access to allow the vpn client to access our server right? This is all new to me and could you give an example how to configure vpn inside my firewall in CLI or PDM command and how to configure the software vpn client. Please help us beginners cisco Tonny Tony, Try chanigng a cisco and see if it solves... but otherwise, since you changed the PIX outside IP now, you will be able to make VPN connections to the new public IP address now, if it is routed on the internet. can you please try to connect now and let us know what is happening? Duplicate the Apple ID/e-mail address We had the Apple ID/e-mail address of sxxxxx@mac since 2004. I have always understood that even if I chose to never use versions @me.com or @icloud.com, they did default, belong to us. Recently we started to receive digital receipts sent to the sx No content appears suddenly when I click on some of the items in the Inbox. For the rest, I get the code, rather than normal text, and the content is not related to the sender/topic. Trash folder disappeared entirely; but when I rechecked a day later Yesterday, I upgraded to firefox 4 because I had problems with noscript and my version previous freeze my mac book. I don't remember what the previous version was, unfortunately, because I would like to return. In the previous version, the links on w How can I keep my HP1510 all-in-one to print the test pages as much? How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this opt Request for update of firmware for HX100V to include photography in fast motion in the film section. Now I can record in 30ps (MPEG4) or 60ps (AVCHD). It should be possible to allow flexible adjustment for slower frame per second to produce the same
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteniSimilar Questions
RemoteDisplay.vnc.port = '5910 '.
RemoteDisplay.vnc.password = 'somepassword '.
RemoteDisplay.vnc.keymap = 'uk '.
Unfortunately, cisco does not world class technical service... they called but no use.Maybe you are looking for