Storage VMotion for a virtual machine with SAN LUNS attached to it. They are all going to?

Similar Questions

• Storage vMotion for a virtual machine on vCD

  Hello

  I saw this cluster data store is not yet supported, but is it possible to make a storage vmotion, a computer virtual managed by vCloud Director, on the same vDC data store?

  Imagine that I present you 2 store data for the provider vDC, I can move the virtual machine between two data store?

  Thanks for your reply.

  Cédric

  See this Q & A blog.

  http://www.virtual-blog.com/2010/10/VMware-vCloud-Director-QA-part-2/

• Best Senario distributed virtual machine between SAN LUNS and replication fail over Senario

  What the best best Senario for the installation of virtual machines on Big LUN or each VM on LUNS dedicated:

  We planninig to implement 70 virtual machines on Esx 3.5 servers with replication LUN usisng CA of HP 7.

  using 4 Big 800 GB data store on SAN RAID 5 Lun (each LUN will be contains 16 VMS)? or each VM will be deployed in separate small LUN 50 GB data store on SAN, RAID 5 and that this effect on the failure during the procedure on the DR Site if we choose BIG LUNs, also if this virtual machine includes 3 disks (store them on each disk on the different data store or the same data store)

  Thank you

  Remember that the virtual machine is a set of files and these files directly in your data store.  If you have a large store of data with multiple virtual machines, you must replicate the full data on the alternative site store in order to get to that data.  You can't really use greater SAN replication for just the simple vm in a data store.  SAN replication is not really aware of what is stored on it, she replied just blocks he knows.  You can copy the vm files individually as well, but it's more than a copy and not replication.  Otherwise, if you are concerned about vs some other vm, then using a small LUN would work better for you, or warehouses of data at multiple levels allows you to replicate the vm that are important to you and put the rest in a larger data store.

  FCIP/FC/IP doesn't really matter.  Until a table can talk to each other, you're fine.  Our secondary site is hundreds of miles away, and replicate us very well during the period of INQUIRY, from one table to the other.

  Yes, without SRM, you will need to manually register a virtual machine at the time, or write a script to work through all the.

  -KjB

  VMware vExpert

• Disable vmotion for 1 virtual machine in an ESX host

  Hello

  We have an ESX environment that is configured with vMotion.

  As a result, I've seen VMs from one ESX to another very frequently.

  Among these virtual machines, I have a very critical virtual machine, I want to move to any other host ESX.

  Y at - it an option that I can use to disable VMotion only for this particular virtual machine of mine (in order to keep constant on the ESX on which it is right now) and allow the other virtual machines to continue.

  Appreciate your help.

  Thanks in advance

  I guess that your VMS migrate between ESX servers because configuration automated DRS ESX cluster level. You can replace it for a specific virtual machine. Cluster of right click Select-> "Settings"-> click on options of the Virtual Machine under VMware DRS,. On the right, make sure 'Enable the levels of automation individuak virtual machine' is checked. You can see VMs list below. Select the virtual machine that you want to replace and change the level of automation for people with reduced mobility

• Average throughput of the network to a virtual machine with PowerCLI

  I would get average network throughput for a virtual machine with PowerCLI including all e-cards, the virtual machine has for the last week (not including NFS or storage of traffic-related).

  How best should add this report:

  Get - vm myvm | Select name, numcpu

  Thank you!

  Try like this

  Get-VM | Select Name, @{N="Avg Network Throughput MBPs";E={    [math]::Round((Get-Stat -Entity $_ -Start (Get-Date).AddDays(-7) -Stat "net.throughput.usage.average" |    where {$_.Instance -eq ""} |    Measure-Object -Property Value -Average | Select -ExpandProperty Average)/1KB,2)}}
  

  The script takes the aggregate value for all NICs for (the one where the Instance is an empty string).

  Then we take the average and converts the Kbps, Mbps.

• Impossible to deploy the virtual machine with customization.

  Hi all

  I have a model Winodws 2008 R2 Std and Ent.  I use to deploy virtual machines with the model using the Customization Wizard.  All of a sudden since 2 days I can't provision VMS with the wizard of customiation.  Earlier, there seems to be no problem with the customization, but when I turn on the virtual machine, I see errors, attached is the screen shot for your reference.

  After the error 2 the vm keeps restarting without end time.

  I don't know what is the cause.  Please help me with the problem.  Let me know if you need additional information.

  Thanks in advance.

  Hey there,

  Have you tried to get the Microsoft Windows product key? And maybe the password in the profile customization.

  If this does not work, try using a new profile customization.

  Let us know how things work!

  See you soon,.

  René

• Pre-built virtual machine with OBIEE and APEX

  Hi all
  
  I searched for a virtual machine with OBIEE and APEX pre-installed, but I can't find it... or information messages on this subject. Does anyone know if y at - it a selection of pre-designed developer programs VM with these two tools?
  I currently have the "database App Development VM' with APEX in there, but I can't understand how to install OBIEE inside.
  
  Any help will be appreciated.
  
  Please, if this is not the right category where I should ask the question, let me know and I'll move it.
  
  Thank you.
  Elena.

  PL see deployment guide in the link above - the model of computer virtual includes version of database 11.2.0.3, which should be the APEX installed by default in it. If this isn't the case, it will be much easier to install the APEX in the VM OBIEE.

  For sharing files between the host and the guest, pl see the Virtualbox documentation - http://www.virtualbox.org/manual/ch04.html#sharedfolders

  HTH
  Srini

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.

• Plan for the creation of new virtual machine with 3 TB data drive

  We have an old server, we need to virtualize, and one thing that we need is a lot more storage. We have approximately 3.25 TB of available for this machine (250 GB for the OS and 3 to for the data drives), but I'm going in circles trying to find the best approach for this server. It is not possible to separate the data between several players because of the way the files are indexed. I have created a virtual machine with 2 TB of disk space (for the readers of OS and data) and added 1.25 TB of disk space I want to add on the data reader, but it does not seem possible to add 1.25 TB without destroying the data on the first disk of 2 TB. What is the best approach? Create a single disc for my virtual machine that is 250 GB and then add in two separate disks of 1.5 TB for storage and combine them within Windows?

  Thanks for your suggestions.

  Hello

  Unfortunately, the maximum size of virtual disk to a virtual computer is 2 TB - 512 bytes. In you case it should create two or three separate virtual disks and combine them (disks RAID 0 or concatenate). Another way (IMHO besser way) is to create several virtual drives and mount using NTFS mount points.

  An example:

  C:\Data is a folder on one of the virtual disks. Create a second virtual disks and create the C:\Data\Data2 folder. Rather than assign a drive letter for the newly created disk, you can mount it in the Database2 folder. This gives you the ability to move the largest files on separate virtual drives without lose you the structure of folders.

  Kind regards

  Patrick

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• VCenter shows a network for a virtual machine that is not associated with any host

  I have a win2k3 VM who at one point had a network assigned to him called "MONITORING".  This network is configured is no longer in the ESXi (5.5) environment.  The virtual machine is connected to a network called "PRD-SURVEILLANCE" which is correct.  It's not really cause a problem, but I can't find a way to get rid of the object of MONITORING network.

  In VCenter MONITORING networks has a VM of 1 meter, the number of hosts of 0.  I also see it in the VM - dialog box, change the settings, but there is no option to remove it.  Profile Image to the virtual machine is version 10 so I can't use the old Client of VI to try to remove it.  I have checked each host and do not see this listed network object.

  I tried to restart the VM, it migration between hosts, changing its network of SURVEILLANCE of PRD to another network and vice versa and close - remove NIC and add a new card network.  MONITORING legacy network still appears in the config.

  For the virtual machine's .vmx file shows that the correct network: ethernet0.networkName = 'RDP-ANALYSIS '.

  Any suggestions on how I can remove the artifact of MONITORING network?

  The virtual machine has a preview that was created at the time where the MONITORING network was still affected?

  André

• Research of virtual machines with reservations

  We have over 500 virtual machines in our group and there are at least 3 Directors who are able to create virtual machines in our environment.  I need to know a way to search for virtual machines with memory or the CPU reserves.  We lack vSphere 4.1.  Thanks for your help.

  If you have a configured cluster. by using the vi client, access your vcenter

  Click on your cluster > resources tab (you can move the memory, processor and storage)

• Create the virtual machine with the type of controller SCSI LSI logic SAS with PowerCLi

  Hey guys,.

  IM the difficulty to create a virtual machine with the type of controller SCSI to "LSI Logic SAS". The cmdlet New - VM im struggling to find where to create the type of controller?

  If you create a virtual machine without specifying a disk it will create a 4 GB SCSI type thick (0:0) hard drive 1 with 0 Parrall default BusLogic SCSI controller.

  What im wanting to do is to create a disk hard which is thin Prov. and create SCSI LSI logic SAS controller is set to.

  New-VM -name VMSTORE23 -$vmhost $esxhost MemoryMB- 4096 NumCpu- 2 -NetworkName "Vlan 6 Machine Virtual Network" | Get-NetworkAdapter | Set-NetworkAdapter -Type Vmxnet3 -MacAddress '00:50:56:00:00:21' -confirm:$false

  I have recived of aid by some LucD who helped direct the value of the network card in the New - VM cmdlet as follows. But I'm not able to add a hose for hard disk also like:

  | Get-hard drive | Together-hard drive - Datastore $datastore - slim StorageFormat

  And I have no idea how change the type of SCSI conroller or create it with the correct configuration?

  Any help would be great,

  Thanks in advance

  Eddie

  Greetings, steddyeddie-

  You should be able to use Set - hard drive and SCSI controller Set cmdlets to set the storage format of your hard drive and the SCSI controller type, respectively.  You were close to on the part of game - hard drive .  Try something like:

  ## get the VM object $vmVMSTORE23 = Get-VM VMSTORE23 ## set the harddisk storageformat to thin$vmVMSTORE23 | Get-HardDisk | Set-HardDisk -StorageFormat Thin ## set the SCSI controller type$vmVMSTORE23 | Get-ScsiController | Set-ScsiController -Type VirtualLsiLogicSAS
  

  It could pack in to your existing order to keep it as a good word, but for readability.

  Enjoy

• Photos of virtual machines with multiple disks on different LUNS - Question

  I have some questions on how to manage the snapshots of virtual machines with multiple disks on different LUNS.  First of all, the LUNS are VMFS.  We are just starting to add virtual machines with dedicated for data storage format VMFS LUNS.  I don't think an extra space must be made for snapshots, as well as at least 100 GB LUN is required to store the data, and then say, add about 25 to 50% of this amount?  Set the 100 GB vmdk file but have the GB from 25 to 50 additional disk space for snapshots, if necessary (rather than just to get a unit number logic needed 100 GB of data and devote all of the 100 GB to the vmdk file).  In addition, if a virtual machine has several files vmdk on different LUNS, which will be a problem to take a snapshot, and is it possible to do just a snapshot of a disk of a virtual computer (as the volume of the BONE)?

  Thanks for any help.

  Snapshot files are created in the home folder of the VM by default for all virtual disks, no matter on what data store they are. You must make sure you have enough free disk space on the data store for snapshots.

  If you want to exclude a virtual disks of taking snapshots, you can set it to 'Independent' - 'Persistent' machine virtual settings to the HARD drive.

  André