Storm: how to manage multiple data display in a view?

Similar Questions

• How to manage old data?

  It is a very generic question. We use the oracle database. We hold the records of the company in the database. The company records should be available at any time, but over the years that the database continues to grow. Now, how to manage old data. All data are important, but if this is true for several years yet we more and more disk space to manage. Are there effective methodologies to manage old data? For us the old means data that are 10 years old.

  Murray9654 wrote:

  My main concern is the number of disks required. The database continues to grow for years. So how long can we continue to increase the record. It is not about the cost. I'm not sure of what will be the amount of data after 30 years.

  If the cost is not a concern, number of disks shouldn't be a concern.  In the end, you need what it takes to take what you have.  There's no silver bullet to get 50 gallons of sewage in a 10 gallon tank.  How big is your database now?  What is your current disk arragnement - local disks, SAN, NAS...

  Your statement "should be available at any time" seems to eliminate the storage of archives, out-of-database as a band.

• How to manage multiple hardware or auto select a sequence according to a condition?

  How can manage us mutiple devices to TestStand?

  I have 2 types of DMM, because some are no longer available (AG34410 which must be replaced for a 34465 has when he goes to the calibration or breaks down).

  Each DMM is structured in its own *.seq file, which includes all hardware calls.

  Example: Normally the TS developer adds a call sequence and links to 34465.seq and selects the module sub 34465 read several voltage.

  What I'm trying to do is an automatic selection for the correct DMM according to the DMM in StationGlobals:

  34410.SEQ and if he chooses the module sub 34410 read several voltage

  34465.SEQ and if he chooses the module sub 34465 read several voltage.

  All the submodules of the same 'measure' have the same settings, so the call that never would not cause any problems.

  Is this possible without having to implement a ton of if/else conditions for each type of measument or function in a DMM.seq shell?

  We are still at the beginning of a new project, I can change around a few ways to call my sequences or rename all the subsequences under the same name. LabVIEW TestStand API call might be a viable option (although I have not worked with API TS in BT yet).

  Thank you.

  So I threw this example that shows how to dynamically select what sequence of execution.  As long as they have the same prototype you should be good.

  Kind regards

• How to manage multiple Arrays (ArrayCollections)

  Hi Flex community,

  I wanted to know how to manage several bays. How tables look as you can see in the picture. There you can see a result with a php function. This will be done with an object of value.

  

  This happens with:

  vOLogin = loginResult.lastResult [0] as VOLogin;

  At the present time, such things are not a problem:

  trace (vOLogin.UserName);

  But now I'm standing in front of a riddle... How to get "gruppe" or the oder 'w' more difficult 'r '.

  My tests looks like this:

  trace (vOLogin.client.getItemAt (0) .valueOf (Gruppe));

  But I have nothing absolutely nothing...

  Hope someone has an idea

  Greetings

  flexx0r

  Probably, this will somehow:

• How to manage the data after the serial com port?

  Hi all

  I'm new to labview and serial communication. I tried to receive data on external device labview (pic18f452). It's done, but I am getting data as strings. If microcontroller gives "11.25", in labview each letter is delivered to a different as string ("1""1" "". "") "2" "5").. How can I manage data... to make it unique as 11.25, a number constant.

  If possible, join some examples with your answers... Thanks in advance.

  It seems that you read too fast, read up what an endcharacter probably puts the characters in a string that can translate the string of numbers conversion routines in the palette of the chain.

• How to manage multiple screens?

  I have 4 files fxml... Screen, Screen1, Screen2, Screen3. Screen has left Voletfractionne there is a listView... on the default right side shows screen1. I want to do that when key, Screen1, Screen2 is replaced by screen2, Screen3 button is pressed it never replaced it as the screen that was loaded at this time. Only the right side of the Voletfractionne content can change and any other the same assane.

  Is it possible and if yes, how can I be able to do this?

  MainScreen.fxml

  <?xml version="1.0" encoding="UTF-8"?>
  
  
  <?import java.lang.*?>
  <?import java.util.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  <?import javafx.scene.paint.*?>
  
  
  <AnchorPane id="AnchorPane" maxHeight="-Infinity" maxWidth="-Infinity" minHeight="-Infinity" minWidth="-Infinity" prefHeight="400.0" prefWidth="600.0" xmlns:fx="http://javafx.com/fxml">
    <children>
      <SplitPane dividerPositions="0.26755852842809363" focusTraversable="true" prefHeight="332.0" prefWidth="600.0" AnchorPane.bottomAnchor="0.0" AnchorPane.leftAnchor="0.0" AnchorPane.rightAnchor="0.0" AnchorPane.topAnchor="68.0">
        <items>
          <AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="160.0" prefWidth="100.0">
            <children>
              <ListView prefHeight="398.0" prefWidth="157.0" AnchorPane.bottomAnchor="0.0" AnchorPane.leftAnchor="0.0" AnchorPane.rightAnchor="0.0" AnchorPane.topAnchor="0.0" />
            </children>
          </AnchorPane>
          <AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="160.0" prefWidth="100.0" />
        </items>
      </SplitPane>
      <HBox id="HBox" alignment="CENTER" layoutX="310.0" layoutY="30.0" prefHeight="23.0" prefWidth="237.0" spacing="5.0">
        <children>
          <Button mnemonicParsing="false" text="screen1" />
          <Button mnemonicParsing="false" text="screen2" />
          <Button mnemonicParsing="false" text="screen3" />
        </children>
      </HBox>
    </children>
  </AnchorPane>
  

  Screen1.fxml

  <?xml version="1.0" encoding="UTF-8"?>
  
  
  <?import java.lang.*?>
  <?import java.util.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  <?import javafx.scene.paint.*?>
  
  
  <AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="330.0" prefWidth="435.0" xmlns:fx="http://javafx.com/fxml">
    <children>
      <Label layoutX="157.0" layoutY="128.0" prefHeight="44.0" prefWidth="99.0" text="Screen 1 Loaded" />
    </children>
  </AnchorPane>
  

  Screen2.fxml

  <?xml version="1.0" encoding="UTF-8"?>
  
  
  <?import java.lang.*?>
  <?import java.util.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  <?import javafx.scene.paint.*?>
  
  
  <AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="330.0" prefWidth="435.0" xmlns:fx="http://javafx.com/fxml">
    <children>
      <Label layoutX="145.0" layoutY="121.0" prefHeight="44.0" prefWidth="99.0" text="Screen 2 Loaded" />
    </children>
  </AnchorPane>
  

  SCREEN3.fxml

  <?xml version="1.0" encoding="UTF-8"?>
  
  
  <?import java.lang.*?>
  <?import java.util.*?>
  <?import javafx.scene.control.*?>
  <?import javafx.scene.layout.*?>
  <?import javafx.scene.paint.*?>
  
  
  <AnchorPane minHeight="0.0" minWidth="0.0" prefHeight="330.0" prefWidth="435.0" xmlns:fx="http://javafx.com/fxml">
    <children>
      <Label layoutX="145.0" layoutY="121.0" prefHeight="44.0" prefWidth="99.0" text="Screen 3 Loaded" />
    </children>
  </AnchorPane>
  

  Yes, it is possible to change the elements in a scene that has been loaded using FXML.

  Switching scenes and passing parameters to the controllers are the question the most common two associated FXML.

  There are a few items on the screens of change using FXML.

  A solution of fxml to replace parts of the graphic scene.

  JavaFX - fxml new loading in the same scene - Stack Overflow

  Extra frame mini (I think that's the closest link to you in this answer to what you are looking for).

  A non-fxml solution to replace parts of the graphic scene.

  GUI - how to make menus in the java desktop application - Stack Overflow

  Permutation of the scenes to entire with transitions:

  Management of multiple screens in JavaFX

  Partners:

  Java - switch between the components in JavaFX - Stack Overflow

• How to manage multiple languages in Eloqua?

  Hi all

  I can't seem to find general advice on handling requriements of several languages in Eloqua can someone direct me to a point good information or the answer to the below please?

  • That happens if we want to use the same instance of Eloqua, but our offices are in different countries, and we therefore speak different languages - can I use the same Eloqua system? (and just to specify a language for each user)
    
  • What happens if we want to send the same email campaign to different countries (and so in different languages - English, Spanish, Chinese) English speaking same user/login?
    
  • What happens if clients need fill in the same form, but with different input languages? If that means the fields that the references of the form end up having all the different languages in there?
    

  Any other help/pointers would be very much appreciated!

  Thank you

  Lauren

  Hello Lauren, answer to your questions is YES.

  • You can manage several language requirements within the system Eloqua himself.
  • You can use the activity driving content in emails to send the same email but in different languages based on the languages.
  • If you make use of the Landing pages, then you can use the alternate page for different languages.
  • For the form, you can use a form and create multiple presentations for different languages.

  I hope that I am clear, let me know if you want to know more... happy to help

  Thank you

  Marlene

• How to manage the Data Association output when no line not returned?

  BPM 11 g, I use a Service to select a line in an external database in passing a parameter using a database adapter.  Works fine when a row is returned.  But if no row is returned (which can happen, because no match is not found on the selection based on the value of the parameter), I get an error on the composite as output data Association has return values, including integers, mapped to a data object, I defined in the process.  Well, if no row is found, the integer value is empty and mistakes to try to save him.

  How to handle this situation?

  The specific message is:

  The expression bpmn:getDataOutput('wm91AInterfaceMainCollection') / ns:Wm91AInterfaceMain [1] / ns:board is empty. An attempt to read or copy the referenced data or calculated by the XPath generated invalid data, according to the XML schema, or did not contain some optional data. Ensure that the variable result or expression named in the error message is not empty. Enable related data elements XML schema validation for the enforcement data are valid.

  I must be missing something obvious here, but can't find a way to handle this.  Thanks in advance!

  Hey Joe,

  Of course, others will be have another idea, but opt for the XSLT option for mapping your data.  Using XSLT, you can check for null in an 'if '.

  Dan

• How to limit the data displayed in the query of the adf

  Hi all
  I have a VO with the query criteria, that I added to the jsf page as Panel query adf with table. There may be particular queires who return the large number of records. Suppose I want to limit the number of records displayed to 10,000. Is this possible with jdeveloper 11g? How can it be done? pls advice.
  
  Thnx,
  N

  Or, you can go to the View-> Tuning object and set the value to 'back up' to the number 10000.

• How to manage multiple e-mail accounts in Outlook Express?

  How to configure different e-mail accounts in Outlook Express?

  Hi Helen,

  To configure e-mail different accounts in Outlook Express follow the steps below:

  1. for each of your email accounts, find the type of email (POP3, IMAP or HTTP) account, the name of the incoming mail server (example: mail.isp.com) and the name of the outgoing SMTP mail server (example: SMTP.) FAI.com). this information is usually found in the file FAQ (frequently asked questions) of the provider or by sending an e-mail to the provider.

  2. start Outlook Express.

  3. Select accounts from the Tools menu. Click the mail tab.

  4. click Add on the right side of the box and choose mail. The Internet Connection Wizard appears.

  5. type the full account name (the name that appears in the line of the electronic mail sent from this account). Click Next.

  6. If you already have the new account, click on the top of the page radio button, enter the name of the account, and click Next.

  7. Enter the e-mail server information that you retrieved in the first step. Be sure to type the information exactly as it appears in your notes. Click Next.

  8. Enter the user name, as it appears on the account. The name is usually the above address; for example, the name of the account of [email protected] is "feedback".

  9 type the password to access the account. If the password is incorrect or if you do not remember, contact the mail provider.

  10 check the box remember password if you do not want Outlook to ask the password whenever it checks the mail.

  11. click on finish. Repeat as needed for all e-mail accounts

  12 change account properties by clicking on the name and choosing Properties from the list on the right.

• How to manage no data found in pdf format using the rtf output

  Hello

  In my rtf model, I have two frames - frame1 and frame2,

  These frameworks are based on the G1 group. Group G1 features of elements empid, empname

  My requirement is

  1. to return frame1 when the query (i.e. group G1) has given, this frame1 would print out the pdf of the report xml editor - correct work

  in the xml output, I saw that < LIST_G1 / > generates as below

  < LIST_G1 >

  < G1 >

  < EMPID > 1234 < / EMPID >

  JOHN < EMPNAME > < / EMPNAME >

  < G1 >

  < G1 >

  < EMPID > 1235 < / EMPID >

  BRAND of < EMPNAME > < / EMPNAME >

  < G1 >

  < G1 >

  < EMPID > 1236 < / EMPID >

  TONY < EMPNAME > < / EMPNAME >

  < G1 >

  < / LIST_G1 >

  2 return frame2 whenever the request (i.e. the group G1) has no data this frame2 output print pdf of the xml editor saying no report given - would not exist currently working.

  output is

  < LIST_G1 >

  < / LIST_G1 >

  (see there is no entry for < G1 > < / G1 > at all.)

  
  

  Now because of that, my frame1/frame2 who checks the value <? choose:? > <? When: County (G1). = 0 ? > out of the reutrning in the first case (as expected)

  but don't return do not all outputs in the 2nd case (his does not work as expected by me)

  
  

  Any pointers or help appreciated.

  
  

  Thanks in advance
  

  It solved using the IF ELSE block in the two frames, I'm back frame1 for the scenario IF count (G1) > 0 and return frame2 for another scenario.

• How to manage the date in cfquery?

  Hello
  
  I have a (qVIEW) query that selects a date (which is a column in a table).
  
  Now, I want to loop through the first query (qVIEW) and then perform another query inside (qRate).
  In fact, my problem is with the 'where' statement qRate I want to put:
  
  where "...". and tbl_daily.adate = qVIEW.lastdate.
  
  I added it (see below), but it gives me error.
  I mistakenly put this line?
  
  Any help would be much appreciated.
  
  THX
  
  
  
  < cfset local = SetLocale ("English (UK) '") >
  
  < cfquery name = "qVIEW" datasource = "mydb" >
  Select
  tbl_view. Name as MyName,
  tbl_view. LASTDATE as lastdate
  of tbl_view
  < / cfquery >
  
  
  
  
  < cfloop query = "qVIEW" >
  
  < cfquery name = "qRate" datasource = "mydb" >
  Select
  tbl_daily.rate rate
  of tbl_daily, tbl_names
  where
  tbl_names. Names = "#qPL.myname #".
  and tbl_names.id = tbl_daily.id
  and tbl_daily.adate = qVIEW.lastdate <!-THIS PART IS GIVING ME ERROR - >
  tbl_daily.id desc order
  < / cfquery >
  
  < / cfloop >
  
  
  
  

  If I understand this... put # qVIEW.lastdate all about it looks like this

  and tbl_daily.adate = #qVIEW.lastdate #.

  and it should work. If lastdate is a variable from another query, you must exit # for your new request to know what it represents...

  otherwise your request will try to look into tbl_daily.adate with a value of "qVIEW.lastdate".

  I hope this helps.

  P.S. If that solved the problem, you may also need to change the line of the top (and tbl_names.id = tbl_daily.id) to include # also: and tbl_names.id = #tbl_daily.id #.

• How to generate multiple dates for a year [Sunday or Monday or Tuesday]

  I want to generate number of holidays for 1 year. based on the box I choose I want to generate all the days in the year. example - if I select the Sunday & Monday I want to generate all Sunday, Monday [dates] for a year.
  
  number of Sundays and Mondays [dates] for a year

  What I would do, is be a table or an index of collection arrayCollection with number of Flex for the day of the week. For example, index 0 will always represent Sunday.
  The State of the check box would change the value of the table at this level, turn MonTableau [0] to true or false

  public static millisecondsPerDay:int const = 1000 * 60 * 60 24;

  private var myArray:Array = new Array;
  myArray [0] = false
  myArray [1] = true
  myArray [2] = true
  myArray [3] = true
  myArray [4] = true
  myArray [5] = true
  myArray [6] = false

  private void GenerateNoofHolidays (): void
  {

  var myDate:Date = new Date();
  var startDate:Date = new Date (myDate.fullYear, myDate.month, myDate.date, 0, 0, 0, 0);
  var endDate:Date = new Date (startDate.getTime () + (365 * millisecondsPerDay));

  While (! startDate > endDate) {}
  for (var x: Number = 0; x)< myarray.length;="">
  If (myArray [StartDate.getDay ()] == false) {}
  He has a holiday doing something, that is to say put a full date of this day in an array / collection arraycollection for manipulation

  }
  startDate.setMilliseconds (startDate.getMilliseconds () + millisecondsPerDay)
  }
  //
  }

  Alert.Show ("\n" + startDate + endDate);
  }

• How to manage the lines multiple region table OFA

  Hi gurus,

  I'm new to the development of new Pages of the OFA. Please help me how to manage multiple lines in the table region OAF.

  My requirement I'm not able to manage multiple lines in my area of Table.

  First row in my table area I am selected date_start and date_end when I select the end_date I need I need difference bet ween dates.

  My problem is I am able to manage the first Table line but I am not able to manage the table still ranks when I fire that time I first get the rank only.

  POS:

  14/08/12 07:59:40 1

  14/08/12 07:59:40 inside

  14/08/12 07:59:40 date difference is 86400000

  14/08/12 07:59:40 date difference is 1

  14/08/12 07:59:40 date is less than 365

  14/08/12 07:59:57 1

  14/08/12 07:59:57 inside

  14/08/12 07:59:57 date difference is 86400000

  14/08/12 07:59:57 date difference is 1

  14/08/12 07:59:57 date is less than 365

  14/08/12 08:00:13 1

  14/08/12-08:00:13 inside

  14/08/12 08:00:13 date difference is 86400000

  14/08/12 08:00:13 date difference is 1

  14/08/12 08:00:13 date is less than 365

  My custom logic:

  	If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "}
  	DateDiff (pageContext, webBean);
  //	Am = XxDutyTravelAMImpl
  //	(XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean);
  	OAViewObject = oaviewobject1
  	(OAViewObject) am.findViewObject ("XxDutyTravelDuDetEOVO1");

  	System.out.println("1");
  	If (oaviewobject1! = null) {}
  	System.out.println ("Inside");
  	oaviewobject1. Reset(); New line added
  	oaviewobject1. Next(); new line added
  	Line OARow = (OARow) oaviewobject1.getCurrentRow ();

  Date sDate = (Date) row.getAttribute ("DutdetStartDate");

  	Date = eDate (Date) row.getAttribute ("DutdetEndDate");
  	java.util.Date VChangeDateTime =
  	new java.util.Date (sDate.timestampValue () .getTime ());

  	If (sDate! = null & & eDate! = null) {}
  	long m1 = sDate.timestampValue () .getTime ();
  	long m2 = eDate.timestampValue () .getTime ();

  	long diff = m2 - m1;
  	System.out.println ("difference in date is" + diff);
  	int diffDays = Math.round (diff / (24 * 60 * 60 * 1000));
  	System.out.println ("difference in date is" + diffDays);
  	If {(diffDays > 365)
  	System.out.println ("Date is greater than 365");
  	} else {}
  	System.out.println ("Date is less than 365");
  	}
  	}
  	}
  	}

  Kind regards

  Srinivas

  Hi Srini,

  To get the event line descriptor that shot please use code below.

  If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "}
  DateDiff (pageContext, webBean);
  Am = XxDutyTravelAMImpl
  (XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean);

  String rowRef = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  OARow line = (OARow) am.findRowByRef (rowRef);

  Date sDate = (Date) row.getAttribute ("DutdetStartDate");

  Date = eDate (Date) row.getAttribute ("DutdetEndDate");
  java.util.Date VChangeDateTime =
  new java.util.Date (sDate.timestampValue () .getTime ());

  If (sDate! = null & eDate! = null) {}
  long m1 = sDate.timestampValue () .getTime ();
  long m2 = eDate.timestampValue () .getTime ();

  long diff = m2 - m1;
  System.out.println ("difference in date is" + diff);
  int diffDays = Math.round (diff / (24 * 60 * 60 * 1000));
  System.out.println ("difference in date is" + diffDays);
  If {(diffDays > 365)
  System.out.println ("Date is greater than 365");
  } else {}
  System.out.println ("Date is less than 365");
  }
  }
         
  }

  Thank you

  Vlaminck

• How to create several data on local storage scsi stores

  Hi all

  If you have a host ESX 3.5 local scsi storage with how you create multiple data warehouses. I would like to create 2 data warehouses. One for my virtual machine and one for my ISO. I tried 2 partitions VMFS3 partitioning at the time of the creation of ESX but when I remove the storage to rename it it only allow me to create 1 data store? Is this possible?

  Is there a downside to simply create a folder in 1 ISO called data store and empty my iso files it?

  I would also like to point out that I have only 1 raid controller

  you will need to manually partition the free space of the Service Console using fdisk.

  If its only for a store, I wouldn't bother.

  Just create a folder like you said yourself, without inconveniences, except that you have to watch out you don't fill your data with the ISOs and other stuff store.