How to create several data on local storage scsi stores

Similar Questions

• HP ProLiant DL160 - cannot create the data with local storage (controller, no RAID) store

  Hi all. I appreciate your time and comments.

  Using VMware ESXi (initially), installation (VMware ESXi 5.5.0, 1331820) will very well (install on USB). Able to enter in the console of the vSphere Client, everything seems normal. Any attempt to use local storage, however, is filled with this error message: http://i.imgur.com/40ySsOS.png

  "It was not correct to specified parameters. Vim.Host.DiskPartitionInfo.spec"-" 'HostStorageSystem.ComputerDiskPartitionInfo' call for object 'storage system' on ESXi "< ip address >" failed. "

  I tried both the base (from VMware) installation disc and the "Custom" (HP) HP installation disk. Both have the same problem: all facilities, but local disks - as seen while - are not able to serve local storage. It worked very well (previous incarnation was as Server 2003 file server, no reported\noticed questions). It's not under warranty, its going to be used as a laboratory server. All this seems to work well.

  Specifics:

  HP DL160 G6

  Storage card: ICH10 6 Port SATA AHCI Controller

  Discs: 3 G MDL 500 GB 7200

  Controller and the disks are perceived by the system: http://i.imgur.com/3PAKQHL.png

  Can someone point me in the right direction on what to go here? Research on the error messages do not lead to a lot of help. I'll get more pending. I would be grateful.

  This could be a problem with the current data on the disk. I suggest clean you the partition info using the DD explained to the KB VMware: Troubleshooting in the add storage Wizard error: cannot read this disk partition information to see if that solves the problem.

  André

• How to configure and use the local storage dirve and usb

  My company bought a server DMM cisco as well as 10 players of 4310 g dmp.  I tried to work on mine here to get it all working.  Let me expose what we would do first before to get into the details.

  The cental DMM will it play any content and be used to create and manage the content here at company wehre I am.  However my boss wants to send dmp individual players (4310 g) out to our factories across the country.  He wants me to be able to creat content or allow a person managing the exact address to edit the content and then push the content from the server DMM to corporate local DPM record either on local storage or attached thumb order.  I guess my questions on what are the following.

  (1) is it necessary to push the content locally for playback?  Willingness to play the content of our dmm on the wan to do lots of traffic?  Presentations could be as simple as a welcome page based presentation playing images video and flash.

  (2) based on local content would be a wise decision I'll have to see exactly how this is done poorly.  In the settings of the dmp, I see the setting of local storage and turned it on and set to read/write.  In regard to the command of thumb gose exactly how I implement that so that DPM can see?  I plug to the back of the drive, and it seems that it is active but the management console of the player I don't see anyway to actaully see if she knows the USB.

  (3) how will push the content for local storage and control of the DMM thumb?  It looks like I can send things to the storage internal if package transfer and or advanced/DPM deployment tasks or server file.  What exactly is the difference between these two?

  (4) Lastly how I actually play the local content of the dmp?  Can I set this up on a schedule of the dmm just like I would if he played the local dmm?

  I searched through the documentation, but I have not found any good docs who are clear to actually how to do these things.  So, any help would be appreciated.

  Thanks in advance.

  gec5741

  Hi Glen,

  Here are the answers to your questions

  1) is it nessesary to push the content locally for playback?  Will  playing content from our dmm over the wan be to much traffic?   Presentations could be as simple as a basic welcome page to a  presentation playing video and flash images.

  It is not required to push the content locally, you can also play the DMM directly. The main advantage of playing on the spot, is that you can transfer the videos several hours or days before the presentation begins to be played if you deploy content off hours and then, when he's ready to start playing the new presentation.

  If you play directly the content of the DMM, the content will be transferred at the time of the DMP starts playback. This may fail if the WAN link is saturated at that time here.

  2) If pushing the content local would be a wise decision I am having  difficulty seeing exactly how this is done.  In the dmp settings I see  the local storage setting and have it turned on and set to read/write.   As far as the thumb drive gose how exactly to I set that up so the dmp  can see it?  I plug it in the back of the player and it looks like it's  active but from the management console of the player I do not see any  way to actaully see if it knows about the usb thumb drive.

  You don't need to do anything to enable USB storage, simply plug it in. To confirm that the DMP is able to see it properly, the simplest way is to connect to the DPM via FTP and confirm that he has a «usb_2» directory This "usb_2" directory, where is the USB drive is mapped.

  3) how will I push the content to the local storage and the thumb drive  from the DMM?  It looks like I can send things to the internal storage  though the advanced tasks/deployment package and or file transfer to DMP  or server.  What exactly is the differnce between these two?

  The task of "File transfer" will just do this, transfer a file to the DMP. The deployment package is smarter and will transfer all the contents of a presentation and organize them in a structure that can be used to read the content locally. You should always use the deployment package.

  4) finally how will I actually play the content from the local dmp?  Can  I set this up on a schedual from the dmm just like I would if it was  playing from the local dmm?

  Yes, she may be scheduled as any other presentation.

  I suggest you have a look at the link below. He explains the steps required to configure the deployment package and read the content deployed with it.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMM/user/guide/DMP/CDs.html#wp2188026

  I hope everything is clear now, but if you have any questions, let me know. I'll try to answer.

  Daniel

• How to create several classes of cascade?

  Goal: Create the button to start and stop the service.

  Situation: One button works.

  However, whenever I click on another button, the button does not work.

  Question: how to create several classes of cascade?

  or something wrong in my code?

  Mini code:

  Calls a CPP QML.

  ApplicationUI::ApplicationUI (bb::cascades:Application * app): QObject (app)

  {
  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);

  CameraWrapper * wrapper = new CameraWrapper();

  QML-> setContextProperty ('wrapper', wrapper);

  AbstractPane * root = qml->() createRootObject;
  App-> setScene (root);
  }

  And then, QML calls another RPC.

  import bb.cascades 1.0

  {Page}
  {Of container
  layout: {DockLayout}
  }
  Button {}
  text: qsTr ("Start")
  onClicked: {}
  wrapper.startRec ();
  }
  }
  Button {}
  text: qsTr ("Stop")
  onClicked: {}
  wrapper.stopRec ();
  }
  }
  }
  }

  The main CPP:

  #include "cam.hpp".

  using namespace bb::cascades;

  {CameraWrapper::CameraWrapper()}

  int CameraWrapper::startRec() {}

  This button works.

  }

  int CameraWrapper::stopRec() {}

  This button does not work.

  }

  The main.hpp

  Class CameraWrapper: public QObject
  {
  Q_OBJECT
  public:
  CameraWrapper();
  Virtual ~ CameraWrapper() {}

  Q_INVOKABLE
  int startRec();
  int stopRec();
  };

  Thank you for your attention,

  Finally, we use the thread to solve the problem.

  Solution:

  loopWrapper (void * test) {void *}
  CameraWrapper * a = (CameraWrapper *) test;
  a-> startRec();
  return null;
  }

  setFlagWrapper (void * test) {void *}
  CameraWrapper * b = (CameraWrapper *) test;
  b-> setFlagFalse)
  return null;
  }

  void * CameraWrapper::setFlagFalse (void * arg) {}
  exit_application = false;
  fprintf (stderr, "Flag changed to false\n");
  return arg;
  }

  void CameraWrapper::runLoop() {}
  pthread_create (& thread_a, NULL, & loopWrapper, (void *) this);
  }

  void CameraWrapper::runSetFlag() {}
  pthread_create (& thread_b, NULL, & setFlagWrapper, (void *) this);

• How to create dummy data with 1 TB

  Hi Expert,

  May I know how to create dummy data with 1 TB to test performance. ?

  Respect of

  Liang

  what columns you want to include? Basically, you can generate as many lines as you like to connect by queries - something like:

  create the table big_t

  as

  with

  generator1 like)

  Select rownum id

  of the double

  connect by level<=>

  )

  ,

  generator2 as)

  Select lpad ('* ', 1000,' *') col1

  of the double

  connect by level<=>

  )

  Select g1.id

  g2.col1

  of generator1 g1

  generator2 g2

  ;

  Of course, it is not 1 TB, but you can change the number of levels. Who said: I think you need to find a sensitive table first structure.

• How to create several users at once.

  Hello experts.
  
  I need to create many users to the Administration tool.
  
  But there too many times.
  
  Please let me know how to create several users at once.

  If you have 1000 + users you should not use the SPR, take a look at the authentication of the external table:

  http://obieeblog.WordPress.com/2009/06/18/OBIEE-security-enforcement-%E2%80%93-external-database-table-authorization/

  concerning

  John
  http://obiee101.blogspot.com/

• How to create several timestamps fileds in EDS data object?

  Hi all
  
  
  I am creating BAM BOF EDS data objects. I have provided information for the connections of the DB, during the recording of the data objects its not allowing the fields of timestamps.
  is there a workaround solution and please let me know the possibilities.
  
  Thank you.
  Swamy

  Hello

  Here is the SNA for this oracle docs question.from
  Note:

  Only the tables owned by the user are displayed when a data object is created on an EDS.

  Creating a data object with multiple fields of time on an EDS stamp is not supported.

  http://docs.Oracle.com/CD/E15586_01/integration.1111/e10224/bam_data_objects.htm#BABCEHBB

  http://docs.Oracle.com/CD/E15586_01/integration.1111/e10224/bam_extl_data_sources.htm

  Thank you
  Siva

• How to CREATE a DIRECTORY using local directory

  Hi all
  
  I want to get some data to the local computer from the remote database service, so I use a stored procedure to get these date and save them in a file before you perform the procedure, I have to CREATE a DIRECTORY ensures that the path of the file.
  
  I use to CREATE a DIRECTORY on the local computer OCCI using, as: "CREATE or REPLACE DIRECTORY MSGDIR AS 'C:\test'" and I can't find the file in C:\test, I found the answer on the internet about this problem, it seems that use to CREATE a DIRECTORY on the database of service rather than on the local computer.
  
  Anyone know how to CREATE the local directory to use?
  Or give me advice to get the data to the local computer in my case?
  
  Best regards.

  It looks that CREATE DIRECTORY use the directory on the database service rather than local machine.
  

  Exactly. Where it States Furthermore?

  Anybody knows how to CREATE DIRECTORY use local directory?
  Or have any advice to get data to local machine in my case?
  

  1 all simply cannot do it. It is not possible, because this would be a serious security breach.
  2 of course, you can share the directory on the server to the network and configure a share on your local machine.
  It's so simple, most people think about it.
  You might also consider using Apex or utl_http directly.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• How to create several site VPN on Cisco 2801

  Hello

  We use 2801 to our VPN needs. We have already configured a VPN site-to site inside. My current scenario is to create several VPN IE at different sites and a remote client VPN server for our road warriors (they use a cisco VPN client to connect).

  Let me know how can I achieve that scenario. Currently we have in VPN profiling in place. can I fill the script using VPN profiles, how it can be used. Kindly advice me at the earliest.

  Please find attached the 2801 direct configuration file, which is quite works very well

  Thanks in advance.

  Djamel.

  Djamel

  As much as I know it does no harm to have political isakmp 9 and isakmp 10 with the same parameters in each of them. But it also is not good. Others that extra isakmp policy I don't see anything that seems problematic in the config you have posted.

  HTH

  Rick

• How to create a date field that is fixed at the signing?

  Hello

  I created a series of PDF forms on Adobe Pro XI which are designed to be filled out using Adobe Reader (where are saved as Adobe Reader Extended). Once the form is complete there are fields of signature that the user who digitally sign then it disables the specific form fields of editing more far. Next to the signature field, I have a date field that, at present, is using JavaScript to automatically generate the date of business at the opening. However, the question that I have is that I want this field date which will be fixed when the form is signed, rather than update again when the form is opened. Is this possible?

  The document JavaScript that I use to generate the date currently is:

  this.getField("Date1").value = util.printd ("dd/mmm/yyyy", new Date());

  But obviously, this is independent of the signature field.

  How can I create a date field which is set by the current date at the signing?

  I am very new to Adobe in general so I don't have much of an idea about how to go about doing this. Could someone please help me to do it if possible?

  Thank you

  KC

  Go to the properties of the field of Signature and on the signing tab, add

  Copy the following code in the section previous "this script is run when the field is signed.

• How to create several contours growing with every distance equal to the original form?

  

  Here is a very simple example... It works with a circle or a square, obviously because he has the same height and width. The problem is when you have irregular shapes (or in this case, an oval). I know I've seen solutions to this in the past, but I can not just think how Word of this question and find them.

  I know that you can create several shots of an object in the appearance palette, but I'm looking for something more effective than simply STROKE color > white line > race color > white race > etc.

  Some examples of the kind of effect I'm looking for.

  

  

  Any help would be greatly appreciated.

  You must use the path of the Offset. Object > path > offset path. Use negative numbers to go inside a form existing, positive to go outside.

  [signature removed by the host of the forum - advertising is prohibited]

• How to create a folder for the storage of electronic mail in a mailbox?

  How can I create a subfolder in a mailbox to store an email?

  Right click on the mailbox you want to add a folder to, and then select the mailbox from the context menu.

• How to create several youtubeclips in different videocontainers

  Hi guys,.

  I'm new on board and in this forum:

  I read the entire discussion about creating several youtube clips in a single container:

  http://forums.Adobe.com/message/4722007#4722007

  Do I have to do is have different containers on the same page with different you tube videos.

  I tried a single container and the method suggested by RUSSmsn:

  ///////////////////////////////////

  ///////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////

  1. RussMSN,.

    

  18-game-2012 5.05 in reply to Kirch12

  So, as I did it was like this:

  Create the button and open the code for this button.  Create a click action.  In the code pane, paste this:

  var youtubevid = $("< iframe/>");
  SYM.$("vContainer"). Empty(). Append (youtubevid);
  youtubevid.attr('type','text/html');
  youtubevid.attr('width','425');
  youtubevid.attr('height','350');

  youtubevid.Attr ('src','http://www.youtube.com/embed/ykF1y2EJ2nI');  URL/Video_Id
  youtubevid.attr('frameborder','1');       // 1 | 0
  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  That what is empty the existing vcontainer and place a new one with the new youtube video.  You can add this to many buttons that you obviously want change the URL ID for each, and it must exchange the video for you with a click.

  Hope that helps!

  Russ

  ///////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////

  ///////////////////////////

  and it works perfectly...

  The problem is that I want to add more videos in the same page...

  I tried to create

  var youtube2 and vcontainer2, but it did not work...

  So I tried to move my first vcontainer to the second position in my page adding a label "button2":

  startup code

  SYM. Play ("button2");

  var youtubevid = $("< iframe/>");

  SYM.$("vContainer"). Empty(). Append (youtubevid);

  youtubevid.attr('type','text/html');

  youtubevid.attr('width','800');

  youtubevid.attr('height','390');

  youtubevid.attr ('src','http://www.youtube.com/embed/ykF1y2EJ2nI'); / / url/Video_Id

  youtubevid.attr('frameborder','1');       // 1 | 0

  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  end of the code

  but this solution did not work or...

  I wonder if it is possible to have 2 videos on the same page...

  I have followed the suggestion of .heathrowe:

  http://www.heathrowe.com/Adobe-edge-preview-4-append-YouTube-video/

  Once again in the action panel step after creating a ready composition, I tried to add a second youtubevid2 var and a second vcontainer2 of container like this:

  beginning

  var youtubevid = $("< iframe/>");

  SYM.$("vContainer"). Append (youtubevid);

  youtubevid.attr('type','text/html');

  youtubevid.attr('width','800');

  youtubevid.attr('height','390');

  youtubevid.attr ('src','http://www.youtube.com/embed/GqcPh3OXoNo'); / / url/Video_Id

  youtubevid.attr('frameborder','1');       // 1 | 0

  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  var youtubevid2 = $("< iframe/>");

  SYM.$("vcontainer2"). Append (youtubevid);

  youtubevid.attr('type','text/html');

  youtubevid.attr('width','800');

  youtubevid.attr('height','390');

  youtubevid.attr ('src','http://www.youtube.com/embed/DF6QvYNHjQ'); / / url/Video_Id

  youtubevid.attr('frameborder','1');       // 1 | 0

  youtubevid.attr('allowfullscreen','0');   // 1 | 0

  end

  -but still once, it did not work

  To be clear, I want to create a page similar to www.bestofyoutube.com with a list of two or more videos in the same page...

  Any suggestions?

  Thanks in advance

  For you second instance you forgot to change the references to variables, changes in bold below

  var youtubevid2 = $("");

  SYM. $("vcontainer2") .append (youtubevid2);

  youtubevid2.attr('type','text/html');

  youtubevid2.attr('width','800');

  youtubevid2.attr('height','390');

  youtubevid2.attr ('src','http://www.youtube.com/embed/DF6QvYNHjQ'); / / url/Video_Id

  youtubevid2.attr('frameborder','1'); // 1 | 0

  youtubevid2.attr('allowfullscreen','0'); // 1 | 0

  Darrell

• Cannot create the data in vSphere 4.1 store

  Hi all

  I can't create a data store in my client vSphere 4.1.

  When I start to create the data store, I get this error, notice how it also says that disk is empty - it is also misrepresentation of the size of the 250 GB drive - should be 3.4 TB

  

  I can go beyond this by pressing return, and then click Next, but after that I entered a data store name, this error pops up:

  

  I don't know why this is, I've also tried it on several other client machines, all show the same errors - I join two error logs in the hope that someone will be able to shed some light on this.

  Thank you

  K

  As said, LUNs presented to the host need to be ESXi <= 2tb="" minus="" 512="" bytes="" in="" order="" to="" work="" as="" expected.="" for="" the="" reason="" of="" this="" limitation="" see=""> http://kb.vmware.com/kb/3371739

  Alternatively, you may consider upgrade to ESXi 5.0, supporting the LUN with up to 64 TB.

  André

• Using data from a spreadsheet, how can create several filled PDF of a form template?

  Note that I'm completely new to adobe acrobat.

  I have a model form for a certificate of achievement for students taking a summer workshop where I work. It includes data such as their name and the program they have completed. I have all the necessary information for each student in an excel sheet to spread. Rather than sit here and enter data into the form 300 + times, I want to automate the process. I would like to be able to specify the worksheet and have just acrobat print every 300, or save them as separate files, so I can print them out easily.

  Thanks for the help!

  Nevermind, I found an alternative. I downloaded pdftk (PDF Toolkit) which is free and thanks to the use of its fill_form operation. I've been able to automate the process.

  Incase it is useful to someone else I'll detail the steps of my work. Operation of pdftk generate_fdf I created my template pdf .fdf file. pdftk's fill_form operation accepts a .fdf and uses it to fill out the forms to a pdf document. Initially I thought that .fdf was a binary format (read it was somewhere, but never looked). Fortunately the field are stored as text, which meant that I could write a program to convert a .csv to .fdf files required quite easily. I did this in c ++, then wrote a quick script of commands to manage calling my program then moving the .fdfs to pdftk to create my pdf forms filled.

  I'm a little surprised, it is as difficult to do as it is, I think it would be a pretty common task.

  Thanks again for the help.