Strange behavior with postGlobalEvent and eventOccurred()...

Similar Questions

• strange behavior with script times

  Hi all

  I have strange behavior with one of my scripts, and I can't understand where is the problem.

  Before you post the code, here's the principle.

  My form has two fields of time: "Time of Injection" and "Post injection time.

  The script runs when the output of "injection time" event and look if the injection time is before time "post injection.

  Here is my code:

  //get the value of the field "Injection time"
  var injection = this.formattedValue;
  
  //create an new Date object
  var injectionTime = new Date();
  
  //split the string to get the HH MM and SS values of the formattedValue (HH:MM:SS)
  var injectionTimeHoursString = injection.substr(0,2);
  var injectionTimeMinutesString = injection.substr(3,2);
  var injectionTimeSecondsString = injection.substr(6,2);
  
  //parse the strings into integer
  var injectionTimeHoursInt = parseInt(injectionTimeHoursString);
  var injectionTimeMinutesInt = parseInt(injectionTimeMinutesString);
  var injectionTimeSecondsInt = parseInt(injectionTimeSecondsString);
  
  //set the integer values into my Date object
  injectionTime.setHours(injectionTimeHoursInt, injectionTimeMinutesInt, injectionTimeSecondsInt,0);
  
  
  //do the same for the other time field "Post injection time"
  var post = post_injection.post_time.formattedValue;
  var postTime = new Date();
  var postTimeHoursString = post.substr(0,2);
  var postTimeMinutesString = post.substr(3,2);
  var postTimeSecondsString = post.substr(6,2);
  var postTimeHoursInt = parseInt(postTimeHoursString);
  var postTimeMinutesInt = parseInt(postTimeMinutesString);
  var postTimeSecondsInt = parseInt(postTimeSecondsString);
  postTime.setHours(postTimeHoursInt, postTimeMinutesInt, postTimeSecondsInt,0);
  
  
  //calculate the difference between both
  var diff = postTime.getTime() - injectionTime.getTime();
  
  //if the difference gives a negative result, display a message, empty the fields and set focus
  if(diff<0) {
       xfa.host.messageBox("The time of injection should be sooner than the time of post-injection activity measure.\n\nPlease re-enter correct times.","Incompatibility of times");
       this.rawValue = "";
       post_injection.post_time.rawValue = "";
       xfa.host.setFocus(post_injection.post_time);
  }
  

  The code seems to run pretty well... except with certain values.

  If postTime is 12:00

  and injetion is 12:04

  I get the error message and everything, so it's OK

  BUT

  When postTime is 12:00

  and injectionTime is 12:08

  No message! as if the difference was not negative! (the difference is zero...)

  When I display the time in a messagebox, 12:04 12:04:00 GMT blah blah... gives but 12:08 gives 12:00:00 GMT etc...

  same problem with 12:09, but not 12:10 for example...

  Any thoughts?

  Thank you.

  Thank you, but since I'm used to javascript, I'll stick to it.

  I understand the problem. It's a javascript with the ParseInt method bug!

  Check here: http://www.breakingpar.com/bkp/home.nsf/0/87256B280015193F87256C85006A6604

  parseInt("08") = 0.

  How to lose 2 hours for a stupid bug...

• Strange behavior with V$ PDB and CDB_SEGMENTS views of Oracle 12 c

  Hello

  I am trying to run a query between the CDB_SEGMENTS and the views V$ PDB on the container ROOT, but I have a strange behavior:

  SQL*Plus: Release 12.1.0.1.0 Production on Fri Sep 6 12:33:25 2013
  
  Copyright (c) 1982, 2013, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
  
  SYS@orcl12c 06.09.2013> show con_id
  
  CON_ID
  ------------------------------
  1
  SYS@orcl12c 06.09.2013> show con_name
  
  CON_NAME
  ------------------------------
  CDB$ROOT
  SYS@orcl12c 06.09.2013> SELECT B.NAME
   2 , A.CON_ID
   3 , A.TABLESPACE_NAME
   4 FROM CDB_SEGMENTS A
   5 INNER JOIN V$PDBS B
   6 ON B.CON_ID=A.CON_ID;
  
  no rows selected
  
  SYS@orcl12c 06.09.2013 12:34:17> SELECT B.NAME
   2 , A.CON_ID
   3 , A.TABLESPACE_NAME
   4 FROM CDB_TABLESPACES A
   5 INNER JOIN V$PDBS B
   6 ON B.CON_ID=A.CON_ID;
  
  NAME CON_ID TABLESPACE_NAME
  ------------------------------ ---------- ------------------------------
  PDB$SEED 2 SYSTEM
  PDB$SEED 2 SYSAUX
  PDB$SEED 2 TEMP
  PDBORCL 3 SYSTEM
  PDBORCL 3 SYSAUX
  PDBORCL 3 TEMP
  PDBORCL 3 USERS
  PDBORCL 3 EXAMPLE
  ...
  
  23 rows selected.
  
  SYS@orcl12c 06.09.2013> SELECT *
   2 FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('asa03y45g99zb'));
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------------------------------------------------------------------
  
  SQL_ID asa03y45g99zb, child number 0
  -------------------------------------
  SELECT B.NAME , A.CON_ID , A.TABLESPACE_NAME FROM
  CDB_SEGMENTS A INNER JOIN V$PDBS B ON B.CON_ID=A.CON_ID
  
  Plan hash value: 3590150304
  
  -------------------------------------------------------------------------------------------------------------------------------------------
  | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
  -------------------------------------------------------------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | | | | 1 (100)| | | | | |
  | 1 | NESTED LOOPS | | 333 | 14985 | 0 (0)| | | | | |
  |* 2 | FIXED TABLE FULL | X$CON | 2 | 30 | 0 (0)| | | | | |
  | 3 | PX COORDINATOR | | | | | | | | | |
  | 4 | PX SEND QC (RANDOM) | :TQ10000 | 167 | 5010 | 0 (0)| | | Q1,00 | P->S | QC (RAND) |
  | 5 | PX PARTITION LIST AND | | 167 | 5010 | 0 (0)|KEY(AP)|KEY(AP)| Q1,00 | PCWC | |
  |* 6 | FIXED TABLE FIXED INDEX| X$CDBVW$e7cdf8a6 (ind:11) | 167 | 5010 | 0 (0)| | | Q1,00 | PCWP | |
  -------------------------------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
   2 - filter(("CON_ID">1 AND "INST_ID"=USERENV('INSTANCE')))
   6 - filter("CON_ID"="CON_ID")
  
  
  25 rows selected.
  
  SYS@orcl12c 06.09.2013> select con_id,count(*) from cdb_segments group by con_id;
  
   CON_ID COUNT(*)
  ---------- ----------
   1 5795
   4 4397
   3 3923
   2 3401
  
  4 rows selected.
  

  Basically, I would like to display the container_name of segments within all PDB files, but the join between CDB_SEGMENTS and views of V$ PDB does not work (lines 20-25) pending the join between CDB_TABLESPACES and V$ PDB works very well (lines 29-34). I've posted the execution plan (lines 50-82).

  You have ideas about this behavior?

  Thank you in advance,

  Arnaud.

  Hello

  Not 100% sure that this is a bug or just something about the way containers works now - however this select seems to work OK:

  SELECT B.NAME, A.CON_ID, A.TABLESPACE_NAME

  OF CDB_SEGMENTS, V$ PDB B

  where to_char (B.CON_ID) = to_char (A.CON_ID)

  See if it works for you too?

  See you soon,.

  Harry

• strange behavior with access Internet and e-mail through D6300 AC1600

  NOTE: When creating this post 'Model' box doesn't let me choose my modem model, it was not an option so I picked one at random! My current modem is the AC1600.

  I hope someone can help with this problem.

  Modem works fine, Internet access is very good.

  My my email on new servers migrated hosting service yesterday now I have strange problems with access to electronic mail.

  I can access e-mail very well on my phone via 4G.

  Unable to access from any device on my network, e-mail, webmail or outlook or messaging.

  If my phone is on the network, it cannot access email either.

  I can ping the e-mail servers and my domain OK from any device

  DNS resolves the addresses OK

  As several devices on the network have difficulty then it is network and/or router associated

  I think a factory reset on the modem as a last resort.

  It's only a problem for e-mail server migration.

  Outlook is saying: the connection to the server has been lost

  Outlook cannot configure the IMAP account automatically.

  When I try manually it says that the server does not support the encryption type (the one provided by the service of the host).

  My companion said that it works OK on hisnetwork.

  Ahhhh, would you believe? After a factory reset of the router and troublehshooting hours I managed to contact my hosting service (I usually go through the dealer) and they said that my IP address has been blocked due to many failed attempts to connect to my CPanel! I had encountered a problem with the password CPanel and who had put on the side so I fixed the problem of e-mail! Heck, who would have guessed that they were related?

  Thanks for your help!

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Strange behavior with the PSD in Photoshop

  I am currently working with a two-page ID CS5.5 document. This is a CMYK document with CMYK images and grayscale.

  Strange behavior is the following: I have a gray levels (tiff) image that is repeated on the page 1 and page 2. This image looks completely different from page 1 to page 2. I have triple checked everything (opactiy, effects, etc.) and then I started to remove items from page 2 one by one.

  As I deleted a psd file all of a sudden all the images in grayscale on page 2 changed his appearance to match page 1. The PSD in question is also in CMYK with a transparent background. What the frack happens?

  I'm more concerned to know if it makes a difference when it goes to print, or if it's just weird screen in InDesign.

  Anyone who has heard of this or know why this happens - would like to hear from you.

  Thank you!

  I think it's simply because of full transparency on the page. Should not affect the production of gray images... but check in Acrobat.

  Mike

• Strange behavior with the paths of the image

  All, morning

  I have a strange behavior going on with my image paths and I was wondering if someone might be able to identify what they think happens?

  On the relative paths of my model (.. / Images/example.jpg) work very well.

  However, on the pages of the child the same relative paths do not display images and so I had to remove the '... /' to get to work (ending up with Images/example.jpg).

  This is obviously not desirable that I'm going to manually tweak the child pages where the content of the combo box was copied directly from the model that works very well.

  Any ideas what might be up?

  Thanks in advance

  You have not yet entered the main directive of models, which is that only changes to the unchangeable in the model regions will be applied to the child pages.  If this were not true, then we could never put unique content on a child page!

  So - the diagram is as follows:

  1 create a template and save it.

  2. the model of a page child spawn.  The child page will be a 'identical' model copy.

  3. Add a unique content to the page of the child.  The child page is now more a copy of 'identical' of the model.

  4 change something in the part NOT MODIFIABLE from the model and save it - all child pages receive the change.

  5 change something in the EDITABLE model part and save it - no child pages do not receive the change.

  6 spawn a NEW page of the model, and it's still a copy of 'identical' AGAIN CHANGED model.

  See how it works?

• Strange behavior with Scan function

  Hi, I see some weird behaviors with the scan function.  Here's a code (for Interactive execution) window which illustrates what I'm struggling with:

  #include 
  static double value;//    1234567890123456static char buffer[20] = "-  24.612 g    ?";
  static int scanneditems;
  static unsigned char sign, stable;
  static char unit[6];
  
  scanneditems = Scan(buffer, "%s>%c[u]%f%c[d]%s[w5y]%c[u]", &sign, &value, unit, &stable);
  

  The buffer I'm scanning has five parts.  The first character is a sign, the next 8 characters is a floating point number, then there is a space that just throw, then five characters is a string that describes the unit, and the last character is a question mark if the reading is unstable or a space otherwise.  The problem is with the last character.  When I run the above code, the value of the variable 'stable' is 32 (space), when I expect a 63 (question mark).  The other points seem to parse correctly, including the double value and the 'unit' char array that contains [g] [space] [space] [space] [space], which is exactly what I expect that it contains.

  It seems I'm missing something obvious, probably something to do with the way that the scan function manages the spaces, but I just can't understand what it is.  Thank you.

  I'm not sure about how Scan treats spaces, but if you check NumFmtdBytes () after the scan you see 12, which means that it has scanned only the 'g' (fill the rest of 'unit' with spaces according to the modifier there) and read the character immediately following the stability.

  This line correctly reads the entire string and returns bytes 16 analyses by the function, which is what is expected.

  scanneditems = Scan (buffer, "%s > %c [u] %f %c [d] %s [-w5t] [u] %c", & sign, & value, unit, & stable);

• DENSE_RANK - strange behavior with an instruction BOX in ORDER BY

  Select the version of v$ instance;

  10.2.0.5.0

  Here is my example query:

  WITH A AS (
  select 40 as id,'708' as loc,'10-108' as act,14.5 as per from dual
  union select 40,'708','10-308',14.5 from dual
  union select 40,'708','10-708',14.5 from dual
  union select 40,'708','10-108',10.5 from dual
  union select 40,'708','10-308',10.5 from dual
  union select 40,'708','10-708',10.5 from dual
  )
  select id,loc,act,per
  ,SUBSTR(act,4,3) as aloc
  ,CASE WHEN SUBSTR(act,4,3) = loc THEN 0 ELSE 1 END as "Case"
  ,row_number() over (partition by id,loc order by per desc,
      CASE WHEN SUBSTR(act,4,3) = loc THEN 0 ELSE 1 END) AS Row_Num
  ,dense_rank() over (partition by id,loc order by per desc
      ,CASE WHEN SUBSTR(act,4,3) = loc THEN 0 ELSE 1 END
    ) as D_Rank
  from A;
  

  Here are the results, I expect:

  ID ACT BY ALOC case no_lig D_RANK LOC

  ---------- --- ------ ---------- ---- ---------- ---------- ----------

  40 708 14.5 10-708 708 0 1 1

  40 708 14.5 10-108 108 1 2 1

  40 708 14.5 10-308 308 1 3 1

  40 708 10.5 10-708 708 0 4 2

  40 708 10.5 10-108 108 1 5 2

  40 708 10.5 10-308 308 1 6 2

  However, these are the results I get:

  ID ACT BY ALOC case no_lig D_RANK LOC

  ---------- --- ------ ---------- ---- ---------- ---------- ----------

  40 708 14.5 10-708 708 0 1 1

  40 708 14.5 10-108 108 1 2 2

  40 708 14.5 10-308 308 1 3 2

  40 708 10.5 10-708 708 0 4 3

  40 708 10.5 10-108 108 1 5 4

  40 708 10.5 10-308 308 1 6 4       

  Since CASE WHEN SUBSTR(act,4,3) = 0 1 loc OTHER END is not in the score, why DENSE_RANK() increments?  ROW_NUMBER() behaves correctly with this CASE statement in its ORDER BY, but DENSE_RANK() does not appear.

  
  

  I think I can solve my problem by removing BOX WHEN SUBSTR (act, 4, 3) = THEN ELSE 0 1 END of my COMMAND DENSE_RANK() loc, however, in academic terms, I still don't understand the above behavior.  Is this a bug in DENSE_RANK or is it normal?

  Hello

  You're right; the expression that you called "Case" is not in clasue SCORE.  If it were, then a change in the value of 'Case' would cause DENSE_RANK generate a new set of numbers, starting with 1.  Tha't, it is clearly not what is happening here.  In this query, a change in the 'deal' is originally results increment, not start with 1.

  Don't forget the ORDER BY operation

  ORDER BY w, x, y, z

  the distinction between the lines to which none of the expressions w, x, y or z is different.  A change in one of these expressions (in general) causes a change in the results.

  In this example, 'Deal' is part of the analytical ORDER byclause DENSE_RANK, so you should expect a change in the "box" to cause a change in the value returned by DENSE_RANK.

  In this query, DENSE_RANK assigns different numbers with lines that have different values of 'box '.  Lower values of 'Case' will be assigned lower values of D_Rank, which is what you see.

  Lines with a = 14.5 and "Breaks" = 0 get a lower D_Rank (they get D-rank = 1) than the lines with per = 14.5 and "Break" = 1 (they get D_Rank = 2).

  Lines with by = 10.5 and "Breaks" = 0 get a lower D_Rank (they get D-rank = 3) of lines with by = 10.5 and "Case" = 1 (they get D_Rank = 4).

  You're right about how to get the first set of results, too.  If ORDER BY DESC is the ORDER byclause analytical together, DENSE_RANK assign the same number for all rows in the partition that have the same value of per, no matter what values are in all the other columns.

  The fact that "The case" is a CASE expression is actually irrelevant.  If you had a column, with 0 and 1 used and stored in this column in the ORDER BY clause, you would see the same behavior.

• Strange behavior with mkdir ASMCMD

  First there is option no. - p with the mkdir command, as in Linux. To create multiple directories/subdirectories so I tried the following.

  asmcmd > mkdir arch/racdb1 + arch/racdb2 + racdb1/arch/archivelog + arch/racdb2/archivelog

  1. This creates the first three folders. But gives error on the last.

  Someone said do not use + sign. So tried this,

  2. tried still nothing does not.

  

  Once again creates first 3 folder but not the fourth. On the other hand, if I just try to create 3 directories/subdirectories in any order it works. Of course I have it in two separate commands, but I wondered why this strange behavior.

  But it worked for me in 11.2.0.3:

  ASMCMD > mkdir + DATA / has DATA + DATA/C / A / B + DATA/C/D

  ASMCMD > cd DATA

  ASMCMD > ls

  A /

  C /.

  ORCL.

  ORCL_P /.

  PEPSI.

  SERVICETEST.

  TEST /.

  vmrac-cluster.

  ASMCMD > cd A

  ASMCMD > ls

  B /

  ASMCMD > cd...

  ASMCMD > cd C

  ASMCMD > ls

  D /.

• Strange behavior with videos...

  I have put 4 different videos in one page.

  Video01, Video02, etc.

  Each video has a personalized poster.

  But when a click Video04 the viewer of the iPad and Desktop Viewer plays Video03 or Video02

  Any advice?

  Fixed a problem.

  The film inside the frame was great as the frame causing this strange behavior.

  After use, "Fill the frame proportionally" everyting works perfectly.

  Thank you

• Strange behavior with align on the pixel grid, pixelated and zoom overview

  I have some frustrating behavior during the attempt to create, adjust and align objects not according to WARNING: no pixels in artificial intelligence.

  * Line up on the grid of pixels with preview raster on, does not appear to align objects whole pixels. It does not with the option for new active objects, or verifying the individual objects in the processing window.

  * Zoom / out causes pixel location/color change randomly. Maybe I don't understand exactly how these features work in artificial intelligence, but once I have enough to see the zoom pixels, I do not expect to change when the zoom and more.

  * Travel/objects setting creates artifacts on my work plans. Zoom / out out them, but causes the weird behavior described above.

  Advice? Advice? I'm doing something wrong? See you soon!

  Riley,

  I think this is one for a bug report, or should we say a feature request (deletion)?

  Adobe - feature request/Bug Report Form

• Strange behavior of startup and cannot access the tools-> options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• Strange behavior with CURRENT_TIMESTAMP

  Hello

  I tried to run the query that got the difference between two timestamps using CURRENT_TIMESTAMP and I seem to return inconsistent results.

  Running Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit

  I'm basically taking 1 second (1/24/60/60) of the current timestamp, and I don't think that it turns a value that is always a second. However, it is always more than one second, the difference is always different. Even if 1/24/60/60 is not a second, results should always be consistent from one request to the next right? This behavior is not strange?

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> with a as (select CURRENT_TIMESTAMP cts from dual)
    2  select TO_CHAR(a.cts-(a.cts-(1/24/60/60)),'YYYY-MM-DD HH24:MI:SS.FF') difference
    3  from a
    4  ;
  
  DIFFERENCE
  ---------------------------
  +000000000 00:00:01.334196
  
  
  SQL> with a as (select CURRENT_TIMESTAMP cts from dual)
    2  select TO_CHAR(a.cts-(a.cts-(1/24/60/60)),'YYYY-MM-DD HH24:MI:SS.FF') difference
    3  from a
    4  ;
  
  DIFFERENCE
  ---------------------------
  +000000000 00:00:01.180302
  
  
  SQL>
  
  
  

  Thank you

  Dave

  Hello

  (a.cts-(1/24/60/60)

  an example of DATE is arithmetic; the result is the DATE is 1 second before a.cts.  As the result of arithmetic DATE is a DATE, there no fraction of a second.

  If you want the time STAMP that is exactly 1 second before to a.cts, then use an INTERVAL, like this:

  a.CTS - '1' SECOND INTERVAL

• More strange problem with keyboard and mouse on Satellite 1900

  Clicking on files or folders, I wonder to confirm the deletion of the clicked elements. The "Left shift" is interpreted as a backspace. I was afraid of a virus; but no viruses or spyware are present. I reformatted and reinstalled evrything; the problem persists. Everyone has known and resolved this strange problem.
  Thank you for the help.

  Hello

  It's very strange. Unfortunately I have no precise explanation. I suggest you check this with external keyboard to see if the keyboard is not defective.