Strange behavior with the function «Help in command line»

Similar Questions

• strange behavior with the function extract on CC

  I have a PSD with a specific font, size, etc. When I look at the web in CC and go to the tab "extract" so that all css appears for items, the font size is completely different. There is also a warning of 'approximation due to font substitution'. Why you would say that. I have all installed fonts.

  zimnowski this should now be fixed. Please let me know if you see other problems!

• Strange behavior with Scan function

  Hi, I see some weird behaviors with the scan function.  Here's a code (for Interactive execution) window which illustrates what I'm struggling with:

  #include 
  static double value;//    1234567890123456static char buffer[20] = "-  24.612 g    ?";
  static int scanneditems;
  static unsigned char sign, stable;
  static char unit[6];
  
  scanneditems = Scan(buffer, "%s>%c[u]%f%c[d]%s[w5y]%c[u]", &sign, &value, unit, &stable);
  

  The buffer I'm scanning has five parts.  The first character is a sign, the next 8 characters is a floating point number, then there is a space that just throw, then five characters is a string that describes the unit, and the last character is a question mark if the reading is unstable or a space otherwise.  The problem is with the last character.  When I run the above code, the value of the variable 'stable' is 32 (space), when I expect a 63 (question mark).  The other points seem to parse correctly, including the double value and the 'unit' char array that contains [g] [space] [space] [space] [space], which is exactly what I expect that it contains.

  It seems I'm missing something obvious, probably something to do with the way that the scan function manages the spaces, but I just can't understand what it is.  Thank you.

  I'm not sure about how Scan treats spaces, but if you check NumFmtdBytes () after the scan you see 12, which means that it has scanned only the 'g' (fill the rest of 'unit' with spaces according to the modifier there) and read the character immediately following the stability.

  This line correctly reads the entire string and returns bytes 16 analyses by the function, which is what is expected.

  scanneditems = Scan (buffer, "%s > %c [u] %f %c [d] %s [-w5t] [u] %c", & sign, & value, unit, & stable);

• Strange behavior with the PSD in Photoshop

  I am currently working with a two-page ID CS5.5 document. This is a CMYK document with CMYK images and grayscale.

  Strange behavior is the following: I have a gray levels (tiff) image that is repeated on the page 1 and page 2. This image looks completely different from page 1 to page 2. I have triple checked everything (opactiy, effects, etc.) and then I started to remove items from page 2 one by one.

  As I deleted a psd file all of a sudden all the images in grayscale on page 2 changed his appearance to match page 1. The PSD in question is also in CMYK with a transparent background. What the frack happens?

  I'm more concerned to know if it makes a difference when it goes to print, or if it's just weird screen in InDesign.

  Anyone who has heard of this or know why this happens - would like to hear from you.

  Thank you!

  I think it's simply because of full transparency on the page. Should not affect the production of gray images... but check in Acrobat.

  Mike

• Strange behavior with the paths of the image

  All, morning

  I have a strange behavior going on with my image paths and I was wondering if someone might be able to identify what they think happens?

  On the relative paths of my model (.. / Images/example.jpg) work very well.

  However, on the pages of the child the same relative paths do not display images and so I had to remove the '... /' to get to work (ending up with Images/example.jpg).

  This is obviously not desirable that I'm going to manually tweak the child pages where the content of the combo box was copied directly from the model that works very well.

  Any ideas what might be up?

  Thanks in advance

  You have not yet entered the main directive of models, which is that only changes to the unchangeable in the model regions will be applied to the child pages.  If this were not true, then we could never put unique content on a child page!

  So - the diagram is as follows:

  1 create a template and save it.

  2. the model of a page child spawn.  The child page will be a 'identical' model copy.

  3. Add a unique content to the page of the child.  The child page is now more a copy of 'identical' of the model.

  4 change something in the part NOT MODIFIABLE from the model and save it - all child pages receive the change.

  5 change something in the EDITABLE model part and save it - no child pages do not receive the change.

  6 spawn a NEW page of the model, and it's still a copy of 'identical' AGAIN CHANGED model.

  See how it works?

• Strange error with RHCL RH10 and RH11 command-line compilation

  Hello once again, RoboHelp gurus!

  I feel a strange error using the compilation process command-line rchl in RoboHelp 10 and 11 of RoboHelp.

  Here is the command I use:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl "C:\folder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\log\folder\logfile.txt".

  When I generate the log of the cmd file, I see an error "LILo: BIBCientInit could not initialize" twice in the window of cmd prompt while compiling is the treatment.  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl "C:\projectfolder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\logfolder\logfile.txt" [press ENTER]
  

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML >

  
  

  The created FichierJournal.txt has no mention of ""LILo: BIBCientInit could not initialize "it contains."  Compiling builds without problem, as far as I can tell.

  
  

  The same thing happens when I do not create the log during the cmd file and it errors record right "compensation output folder.  But, it seems to me that the output folder does not actually get disabled.

  
  

  This allows the viewing of the compilation process line by line in the cmd prompt window.  When the compiler indicates "output Compensation folder...". ', the ' LILo: BIBCientInit failed to initialize "error message appears twice, and then the process continues.

  Here's the command:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl 'C:\folder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder '.

  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl 'C:\projectfolder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder"[press ENTER]

  Adobe (R) RoboHelp version 10.0.0.287 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: C:\folder\project.xpj

  Page layout: SSL_Name.

  Output: c:\outputfolder.

  Scanning for the compilation project...

  Review completed.

  ATTENTION: No luggage description of the file.

  From compilation...

  HTMLHELP 10.0.0.287 preprocessor

  Compilation C:\folder\! chm_tmp_folder_0\project.xpj ...

  Preparation create HTMLHELP...

  Compensation output folder...

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  Preparation of the HTML Help files...

  Copying files...

  ...

  It's okay if it's a HTMLHelp or WebHelp output.  Any thoughts on what is this error and what is the cause?

  I've been away from RoboHelp for about 9 months, but I'll be back on the same projects and the same version of RoboHelp 10 and the same compilation process.  The difference is that I have a new laptop.

  Thank you very much in advance for your time!

  EA

  Adobe was able to recreate this issue on their end, and a bug was created for her.

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Unexpected behavior with the Option "record in the result.

  Hello

  I have unexpected behavior with the Option "record in the result.

  I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

  For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

  1 CallSubsequenceX(Parameter: Enable)

  2 CallSubsequenceX(Parameter: Enable)

  3 CallSubsequenceX(Parameter: Disable)

  4 CallSubsequenceX(Parameter: Disable)

  Expected result:

  1. measures have been reported.

  2. measures have been reported.

  3. measures have not been reported.

  4. measures have not been reported.

  Result:

  1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

  2. measures have been reported. (Ok)

  3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

  4. measures have not been reported. (Ok)

  I use TestStand 2013 (5.1.0.226)

  Thanks in advance.

  -Josymar.

  Hi josymar_guzman,

  I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

  To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

  

  where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

  I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• Strange behavior with postGlobalEvent and eventOccurred()...

  Hello world

  I have a browser plugin for my application that will do two things:

  Firstly, when the BlackBerry browser is forwarded to a Web page with a particular MIME type, the browser plugin will say my application to go to the foreground. It works without any problem.

  Secondly, the browser plugin will display a global event at my request. My request, making use of eventOccurred(), will look for this event and the EC type-approval, it will execute an authorize() method that I have. This also works. However, I notice some strange behavior:

  The first time my application launches the BlackBerry browser and goes to the page specified (with a custom MIME type), everything works fine. If I had while my application to launch the browser and do it AGAIN, my authorize() method is running TWICE. If I open the browser of my application for the third time, so my authorize() method is started THREE times. See the model?

  .. .This is all this without leaving my application. If I had to leave and then start my application again, the 'sequence' prior would begin again. Thus, it seems that whenever x times that I repeat this process, the eventOccurred() method will receive x events.

  Here are a few snippets:

  public class Events {
      final public static int EVENT_AUTHORIZE = 1;
      final public static int EVENT_OTHER = 2;
  }
  

  manager.postGlobalEvent(pid, 0xCAFEBABE, 1, 0, null, null);
  

  public void eventOccurred(long guid, int event_type, int arg2, Object arg3,
              Object arg4) {
          if (guid == 0xCAFEBABE) {
              switch (event_type) {
              case Events.EVENT_AUTHORIZE:
                  authorize();
                  System.out.println("EVENT EXECUTION");
                  break;
              case Events.EVENT_OTHER:
                  break;
              }
          }
  
      }
  

  Can we see what is happening here? I've been "racking my brain" on this one for a while now...

  Thank you!

  "Thus, this can work any time the class is instantiated." The class is instantiated just before I open my browser".

  Application.getApplication().addGlobalEventListener(this);
  

  If you call the above (by instantiating your class) every time that you open the browser, applications to register this event listener again and again.

  If you're going to do it this way, make sure removeGlobalListener you when your application is done processing.

  "Can I make addGlobalListener when my application starts even if this class does not implement GlobalEventListener?"

  You can always have your UiApplication implement GlobalEventListener or just instantiate a new object that implements it in the constructor of your UiApplication.

• Strange behavior of the browser blocks SQLDEV DM

  Hello

  I feel some strange behaviors in the browser of Datamodeler.

  After the opening of my model

  I have doubleclick in the window of the browser to fetch a few properties of the index:

  Drawings and models > MyModel > relational models > my RelModel > models > Oracle Database 10g > Tables

  So far, everything that happens.

  -I can select the tables and

  -doubleclicking shows the properties of the table.

  -I can scroll vertically

  -Select other tables

  -open and close the subtree of this physical tables

  Now, as soon as I click on any 'more' in the physical tables (for example, the index node or node of the plate) the browser "tri-de gel".

  The tree is distorted, scrolling seems erratic and it is impossible to select. Most of the time the main menu is also distorted.

  If I make the browser window, most of the time I'm able to hit the "file > save" from the menu. The model seems to be registered properly.

  No damage seems to have been done to the template on the reopening

  I'm on Windows 8 pro with the 64-bit version of datamodeler version 4.1.2.895 (from datamodeler - x 64 - 4.1.2 - 895.zip)

  Any ideas anyone?

  any response greatly appreciated.

  concerning

  Wouter

  Hi Wouter,

  I'm sorry, this is a bug and we are preparing a new version with this bug fixed.

  If I make the browser window, most of the time I'm able to hit the "file > save.

  Close the Data Modeler (X - close button in the upper right corner) and it will ask to save the drawing it is changed.

  Philippe

• Strange behavior of the rectangle tool

  I drew a rectangle with the rectangle tool and got a form than of a conical label around the rectangle. Never seen that before and I could not duplicate once I opened the application again. This seems a strange behavior of the app, or is there something that I don't know this tool? Please tell me this is something lacking in my knowledge base. It drives me crazy

  Monika, yes it was. He worked with the forward Warp effect. Thank you for your response. Mental health is back thank you for your kindness

• strange behavior with script times

  Hi all

  I have strange behavior with one of my scripts, and I can't understand where is the problem.

  Before you post the code, here's the principle.

  My form has two fields of time: "Time of Injection" and "Post injection time.

  The script runs when the output of "injection time" event and look if the injection time is before time "post injection.

  Here is my code:

  //get the value of the field "Injection time"
  var injection = this.formattedValue;
  
  //create an new Date object
  var injectionTime = new Date();
  
  //split the string to get the HH MM and SS values of the formattedValue (HH:MM:SS)
  var injectionTimeHoursString = injection.substr(0,2);
  var injectionTimeMinutesString = injection.substr(3,2);
  var injectionTimeSecondsString = injection.substr(6,2);
  
  //parse the strings into integer
  var injectionTimeHoursInt = parseInt(injectionTimeHoursString);
  var injectionTimeMinutesInt = parseInt(injectionTimeMinutesString);
  var injectionTimeSecondsInt = parseInt(injectionTimeSecondsString);
  
  //set the integer values into my Date object
  injectionTime.setHours(injectionTimeHoursInt, injectionTimeMinutesInt, injectionTimeSecondsInt,0);
  
  
  //do the same for the other time field "Post injection time"
  var post = post_injection.post_time.formattedValue;
  var postTime = new Date();
  var postTimeHoursString = post.substr(0,2);
  var postTimeMinutesString = post.substr(3,2);
  var postTimeSecondsString = post.substr(6,2);
  var postTimeHoursInt = parseInt(postTimeHoursString);
  var postTimeMinutesInt = parseInt(postTimeMinutesString);
  var postTimeSecondsInt = parseInt(postTimeSecondsString);
  postTime.setHours(postTimeHoursInt, postTimeMinutesInt, postTimeSecondsInt,0);
  
  
  //calculate the difference between both
  var diff = postTime.getTime() - injectionTime.getTime();
  
  //if the difference gives a negative result, display a message, empty the fields and set focus
  if(diff<0) {
       xfa.host.messageBox("The time of injection should be sooner than the time of post-injection activity measure.\n\nPlease re-enter correct times.","Incompatibility of times");
       this.rawValue = "";
       post_injection.post_time.rawValue = "";
       xfa.host.setFocus(post_injection.post_time);
  }
  

  The code seems to run pretty well... except with certain values.

  If postTime is 12:00

  and injetion is 12:04

  I get the error message and everything, so it's OK

  BUT

  When postTime is 12:00

  and injectionTime is 12:08

  No message! as if the difference was not negative! (the difference is zero...)

  When I display the time in a messagebox, 12:04 12:04:00 GMT blah blah... gives but 12:08 gives 12:00:00 GMT etc...

  same problem with 12:09, but not 12:10 for example...

  Any thoughts?

  Thank you.

  Thank you, but since I'm used to javascript, I'll stick to it.

  I understand the problem. It's a javascript with the ParseInt method bug!

  Check here: http://www.breakingpar.com/bkp/home.nsf/0/87256B280015193F87256C85006A6604

  parseInt("08") = 0.

  How to lose 2 hours for a stupid bug...

• How is it possible to specific your own, with the constant help of string to locate a directory where the NEW

  How is it possible to specific your own, with the constant help of string to locate a directory where the NEW
  created the folder to save?