Similar Questions

• If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Type these commands in the start menu, run a dialog box:
  Here's how:
  a. Click Start.
  b. in the run box, type the following commands one by one and press to enter.

  regsvr32 dfrgsnap.dll
  regsvr32 dfrgui.dll
  
  Method 2.
  I. to resolve this problem, follow these steps:
  a. Click Start, run, type % Windir%\Inf, and then click OK.
  b. right-click the dfrg.inf file and then click on install.
  OR
  II. Alternatively, you can reinstall Disk Defragmenter using the following command:
  a. Click Start, run and type that the following command and press ENTER.
  Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.inf

  I hope this helps.

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

  I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

  "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

  LOG FILE:

  _____________________________________________________________________________________________________________________________

  Step 0-8

  Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

  Step 4 of 8: UNIX making pretreatment

  Running: chmod 777/db/oracle/OraInventory r

  chmod-r 777/db/oracle/OraInventory succeeded

  Step 4 of 8

  Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

  PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

  runProcess_1

  StatusString installation of Applications Technology Stack

  Copy the temp area models

  Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

  One-time fixes copy to temp area

  Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

  / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

  Installation of WebLogic Server.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

  WebLogic Server successfully installed

  Web Tier utility installation.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

  Level successfully installed Web utilities

  Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

  EBS registered successfully

  Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

  patching

  / Home/appltest/Bea/beahomelist renamed successfully.

  Application of ad hoc patches

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  
  

  It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

  
  

  Concerning

  KasunA
  

  Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

• Where is the log file for the configuration of the plugin to a vco part?

  Hello

  I have a vco plugin that has a configuration interface, basically, everything works fine, but I can't find the logs for the purposes of Web configuration. I thought that newspapers could be found in Server.log (in my case, the exact path is C:\Program Files\VMware\Infrastructure\Orchestrator\app-server\server\vmo\log\server.log) but they were not there.

  I checked a few other plugins vCO well known as the SSH plugin, but I can't find the newspapers for his configuration interface, either.

  Can someone let me know if I'm looking the wrong log file? Thanks in advance.

  To the vCO 5.1 you can check in {vCO_INSTALL_FOLDER}\configuration\jetty\logs\jetty.log

  And log4j.configuration I think is in {vCO_INSTALL_FOLDER}\configuration\jetty\resources\log4j.xml

• How to make the Apache configuration for two different areas

  Hello
  
  I was trying just a few clustering on weblogic workshop. I was facing a problem... Here's the scenario:
  
  I have two clusters:
  
  CLUSTER1: 3 managed servers (server1, server2, serveur3)
  Cluster2: 2managed servers (server4, Server5)
  
  I have two examples of applications I have made on these two clusters i.e on cluster1 app1 and app2 on cluster2.
  
  These two applications are deployed all as I am able to open these browser applications by calling the individual run as server port: http://localhost:7003 / app1.
  
  Now, I have installed an apache server on my laptop and configured the http.conf file.
  
  
  Question: I am not able to call the application of apache. If there is only a single cluster then it works very well and for an application two that a single cluster (application) only works too which port is set in the last.
  
  Here are the contents of my httpd.conf file:
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2. 2' will be interpreted by the
  # Server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files/Apache Software Foundation/Apache2. 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen 80
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  LoadModule modules/mod_wl.so weblogic_module
  
  
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin < adminurl >
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName < servername >
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs".
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule dir_module >
  DirectoryIndex index.html
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http:// < url >/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  # Alias /webpath/full/filesystem/path
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias/cgi-bin / "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/".
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files / Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  #AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 subscription_info.html < url >
  #
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  This is so for the app2 only configuration above, I am able to call and app1 his adage "404 page not found".
  
  Can soomebody help me cofiguring apache so that I can call the two applications.
  
  
  Thank you
  Ankit

  >
  
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  

  
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  
  >

  This configuration is a little weird. He has /app1 MatchExpression and MatchExpression /app2 and at the same time two sections . Are you sure you understand what means that the configuration?

  Try something like this...

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  

  where /app1 and /app2 are your weblogic applications contexts.

  http://download.Oracle.com/docs/CD/E11035_01/WLS100/plugins/Apache.html
  http://httpd.Apache.org/docs/2.0/mod/core.html#location

• No. before the value in the log file for the PK column on updates

  I can't seem to get 'before' values for columns which are PK appears in my trail files.  For example: when playing with a velocity template:

  #foreach ($op in $tx)

  #foreach ($col in the $op)

  front: $col.getBeforeValue)

  After: $col.getAfterValue)

  #{end}

  #{end}

  ... If the operation is an INSERT, then the values for all columns in the later, so the INSERTS are very well.

  If the operation is a DELETION, then the value of column PK * fact * appear in the front, if DELETIONS are fine.

  ... If the operation is an UPDATE, then the PK column value does * not * appear in both the front or after, if updates are broken.

  I tried to set the following in the parameters to my snippet... each with no change in the results:

  nocompressupdates

  getupdatebefores

  I run OGG Capture for Oracle Version 11.2.1.0.3 on Solaris, sparc 64-bit on the OGG is running against my DB Oracle redo logs.

  I'm under OGG Capture Version 11.1.1.0.0 on Solaris, sparc 64-bit of the system on which I am pumping files path, against which I'm reading the front of values in a userexit, as described above.

  Thanks for the tips / pointers.

  In order to get the PK column for an update, you must add an additional newspaper group that includes the primary key columns with the GGSCI ADD TRANDATA command. This is discussed in the Oracle GoldenGate Oracle installation and Guide in the section "To enable additional logging at the level of the table", found here:

  http://docs.Oracle.com/CD/E22355_01/doc.11111/e21406.PDF

  A combination to add TRANDATA and GETUPDATEBEFORES, you should get what you want. Here's more information:

  FAQ - 11.2.1 - how to extract parameters affect the data to be selected to be written in the file path GoldenGate. (Doc ID 1478414.1)

  Let me know if you have any other questions.

  Best regards

  Mary

• Oblix_OBWebGate_AuthnAndAuthz:... - cannot read the log configuration file.

  Hi all

  I have a painful problem with Oracle 10 g Webgate. I use Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted resource Apache. I have a custom authentication plugin problem. is not yet resolved (https://forums.oracle.com/thread/2549716).

  Now I apply patch BP9 for Webgate (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate), now I have a new problem, I am unable to get the OAM login page when trying to access my resources to Apache.

  The Error Message in the browser is:

  Internal server error

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Please contact the server administrator, root@localhost and inform them of the time the error occurred and anything you might have done that may have caused the error.

  More information about this error may be available in the server error log.

  Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
  In the error log file of  Apache I have found

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

   

   

  Can Anyone help me regarding this issue...

   

  Thanks

  Tamim Khan

• How to change the sort order of the items sought for the last element of this research first. I DON'T want to say the order search engines, but the existing research by arrow down

  I want to be able to change the sort order of the items, I already looked in the search box. I want to be able to hit the arrow key down and see my previous searches in order of last search showing the first. For the moment, I don't know how it is sorting and it is very annoying to have to re - enter a query that I typed 5 minutes earlier, but because I typed in another 10 since it's lost somewhere in the list. Is it possible, I Googled, but did not find the topic anywhere. Just to clarify, I DON'T mean of the order of the search engines (which is what appears in google), I mean that the text typed into which has been registered in the drop-down list.

  Thank you

  'Form filling' uses a "frecency" algorithm, frequency + recency, similar to the list of AutoComplete address bar.

  I found an extension that seems relevant, but critics are old, so I'm not sure it's still working: Searchbar Autocomplete Order.

  But... is the AutoComplete does not? I expect that typing a few characters of the previous query would be to filter the list so that you can easily select? Or is the problem that the list does not remember quite who looking for?

• Router ignores the policies configured for VPN

  These are the policies that are configured for phase 1:

  crypto ISAKMP policy 1

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  lifetime 28800

  !

  crypto ISAKMP policy 3

  BA 3des

  md5 hash

  preshared authentication

  Group 5

  lifetime 28800

  !

  crypto ISAKMP policy 5

  BA aes

  preshared authentication

  Group 2

  !

  crypto ISAKMP policy 7

  BA aes

  preshared authentication

  Group 2

  lifetime 28800

  !

  crypto ISAKMP policy 9

  BA aes 256

  preshared authentication

  Group 2

  lifetime 28800

  However, this is what tells me my debug:

  16 Jul 18:23:19: ISAKMP: (0): pair found pre-shared key matching 67.216.78.20

  16 Jul 18:23:19: ISAKMP: (0): pre-shared key local found

  16 Jul 18:23:19: ISAKMP: analysis of the profiles for xauth...

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 3

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 7

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 9

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against priority policy 65535

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): offered hash algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): no offer is accepted!

  16 Jul 18:23:19: ISAKMP: (0): phase 1 SA policy is not acceptable! (local 65.118.143.194

  distance 67.216.78.20)

  The router is completely ignoring all configured policies and try with anything else than the default. Is this a bug?

  Hi Jason,

  What you see is the policy of isakmp that offers the peer and it is compared to the isakmp policies that you have configured on your router.

  You can add other isakmp policy corresponding to this proposal to see if the phase 1 ends.

  crypto ISAKMP policy 2

  the BA

  preshared authentication

  md5 hash

  Group 2

  life 7200

  What is the camera peer?

  Kind regards

  Loren

• Generate the log file for the dialog box

  Hi all

  
  

  I'm generating information for the dialog box as a .txt log file format. That means that if the box is checked, the log file will be give ' checkbox1 - 01.»   Check the report, sizes against the information on tickets and slug jobs"is checked

  
  

  If the checkbox is not checked, the log file will be give ' checkbox1 - 01.»   Check the report, sizes against ticket and slug information on employment"is not checked

  
  

  and also the entry "myText2" also needs to generate the log file

  
  

  Can someone help on this... Help would be appreciated!

  
  

  
  

  var l is new window ('dialogue');.

  myGroup1 var = w.add ("panel", undefined, ' P & & G check the list ');

  myGroup1.alignChildren = 'left ';

  CheckBox1 var = myGroup1.add ("checkbox", not defined, '01.   (Check the ratio, size against the information on tickets and slug jobs");

  CheckBox2 var = myGroup1.add ("checkbox", not defined, '02.   "" "Check images are linked");

  var checkbox3 = myGroup1.add ("checkbox", not defined, '03.   Visually check the progress of KV/model/CP images");

  var checkbox4 = myGroup1.add ("checkbox", not defined, '04.   Visually check the progress of other elements such as Logo and bottle");

  var checkbox5 = myGroup1.add ("checkbox", not defined, '05.   Check the positioning of the markup language");

  var checkbox6 = myGroup1.add ("checkbox", not defined, '06.   Ensure that all measures are calculated Live based area");

  var checkbox7 = myGroup1.add ("checkbox", not defined, '07.   After that the resizing of the picture KV frame open to cut and bleed");

  var checkbox8 = myGroup1.add ("checkbox", not defined, '08.   Complete Magenta if there is insufficient image');

  var checkbox9 = myGroup1.add ("checkbox", not defined, '09.   ("To ensure that the document's bleed, crop gutter and slug information brands ');

  var checkbox10 = myGroup1.add ("checkbox", not defined, '10.   Make sure that the final work is updated on the server");

  var checkbox11 = myGroup1.add ("checkbox", not defined, '11.   ("Enter time cmd");

  var myGroup2 = w.add ('panel', undefined, 'The operator name');

  var myText2 = myGroup2.add ("edittext", undefined, "");

  myText2.characters = 25;

  myGroup2.orientation = 'left ';

  var buttons = w.add ("group");

  Buttons.Add ('button', undefined, 'Export to PDF', {name: 'ok'});

  Buttons.Add ('button', undefined, 'Cancel');

  w.Show ();

  ~ group();

  ~ If (myGroup1.alignChildren.value! = true) {}

  ~ alert ('yes')

  //~ }

  
  

  myDoc = app.activeDocument;

  w = [];

  
  

  DESCRIPTION: Make a TXT file

  myDoc = app.activeDocument;

  Log1 = makeLogFile (app.activeDocument.name.split('.') ([0], myDoc, true);

  log (log1, app.activeDocument.name);

  ~ log2 = makeLogFile ("test", myDoc, false);

  ~ Journal (log2, "Text file log base 2");

  Log1. Execute();

  ~ log2.execute ();

  function makeLogFile (aName, aDoc, deleteIt) {}

  var logLoc; path to the folder that will contain the log file

  try {}

  logLoc = aDoc.filePath;

  } catch (e) {}

  logLoc = getmyDoc (). parent.fsName

  }

  var queue = aFile (logLoc + "/" + name + ".txt");

  If {(deleteIt)

  aFile.remove ();

  return aFile;

  }

  var n = 1;

  so that {(aFile.exists)

  aFile = File (logLoc + "/" + String (n) + ".txt" aName);

  n ++

  }

  return aFile

  }

  function getScriptPath() {}

  try {}

  Return app.activeScript;

  } catch (e) {}

  Return File (e.fileName);

  }

  }

  function log (aFile, message) {}

  var today = new Date();

  If (! aFile.exists) {}

  do the new log file

  aFile.open ("w");

  aFile.write (String (today) + "\n");

  aFile.close ();

  }

  }

  function log (aFile, message) {}

  var text = o;

  If (! aFile.exists) {}

  do the new log file

  aFile.open ("w");

  aFile.write (message + "\n" + "\n" + String (w) + "\n");

  aFile.close ();

  }

  ~ aFile.open ("e");

  ~ aFile.seek (0.2);

  ~ aFile.write ("\n" + message);

  ~ aFile.close ();

  }

  myDoc.close (SaveOptions.no);

  Thanks in advance

  Steve

  Hi Steve,.

  There are some errors in your code.

  1. function 'getmyDoc' is used, but not created.
  2. fucntion 'getScriptPath' is created but not used. (In any case, this will not give you error)
  3. function 'journal' has defined two times with the same length of the parameter.

  etc...

  Here, I have modified your code. Try this.

  var w = new Window ("dialog");
  var myGroup1 = w.add('panel', undefined, 'P&&G Check List');
  myGroup1.alignChildren = "left";
  var checkbox1 = myGroup1.add ("checkbox", undefined, "  01.  Check the ratio, sizes against job ticket and slug information");
  var checkbox2 = myGroup1.add ("checkbox", undefined, "  02.  Check images are linked");
  var checkbox3 = myGroup1.add ("checkbox", undefined, "  03.  Visually check the progression of KV/Model/CP images");
  var checkbox4 = myGroup1.add ("checkbox", undefined, "  04.  Visually check the progression of other elements like Logo and Bottle");
  var checkbox5 = myGroup1.add ("checkbox", undefined, "  05.  Check the placement of Language Tagging");
  var checkbox6 = myGroup1.add ("checkbox", undefined, "  06.  Ensure that all measurements are calculated based on Live area");
  var checkbox7 = myGroup1.add ("checkbox", undefined, "  07.  After resizing the KV image frame opened up to trim and bleed");
  var checkbox8 = myGroup1.add ("checkbox", undefined, "  08.  Fill Magenta if there is inadequate image");
  var checkbox9 = myGroup1.add ("checkbox", undefined, "  09.  Ensure the document has bleed, crop marks, gutter marks and slug information");
  var checkbox10 = myGroup1.add ("checkbox", undefined, "  10.  Ensure the final artwork is updated in the Server");
  var checkbox11 = myGroup1.add ("checkbox", undefined, "  11.  Enter time in CMD");
  var myGroup2 = w.add('panel', undefined, ' Operator Name');
  var myText2 = myGroup2.add("edittext", undefined, "");
  myText2.characters = 25;
  myGroup2.orientation = "left";
  var buttons = w.add ("group");
  buttons.add ("button", undefined, "Export PDF", {name: "ok"});
  buttons.add ("button", undefined, "Cancel");
  w.show ();
  myDoc = app.activeDocument;
  log1 = makeLogFile(app.activeDocument.name.split('.')[0], myDoc, true);
  log(log1, app.activeDocument.name);
  log1.execute();
  function makeLogFile(aName, aDoc, deleteIt)
  {
      var logLoc = "";
      try
      {
          logLoc = aDoc.filePath;
          } catch (e) {}
      var aFile = File(logLoc + "/" + aName + ".txt");
      var n = 1;
      while (aFile.exists)
      {
          aFile = File(logLoc + "/" + aName + String(n) + ".txt");
          n++;
          }
      return aFile
      }
  function log(aFile, message)
  {
      var text = w;
      var rep = "";
      if (!aFile.exists)
      {
          aFile.open("w");
          var today = new Date();
          rep += String(today) + "\n";
          rep += message + "\n" + "\n\n";
          for(var i =0;i
  Kind regards
  Cognet
  		   

• What is the ideal configuration for a new Mac

  Hi all

  First: the reason for this post

  For awhile, I'm faced with a problem on the Adobe software could not be resolved by all the good people at Adobe.

  The problem is that I can't use CC libraries to its full potential. All I can do is save the shades of colors to a library, but no matter what other assets (chart, type specifications etc.).

  Whenever I try to add an asset in a CC library of in Illustrator, I get an error saying "the file may be read-only or another user can open. Please save the document under a different name or in a different folder. Well, there is no one else and saving to a different location or with a different name does nothing. I got the Adobe employee watching my iMac (remotely) to find out what goes wrong. But despite all good intentions, no one was able to solve this problem. And I left it this way for almost a year. OK, so far, for the reason...

  But today, I created a new user on my iMac with the same admin privileges as account when I first set up my iMac, I created. And guess what? Connect with newly created account and using Illustrator on it to add assets to a CC library works without any problem.

  Why? What is the difference in these accounts, I wondered. And after watching the activity monitor in both accounts, I think I know why, but I do not understand.

  My new account is the user name 'Test', and my old account first (first) when I created my iMac is "Letsgo.

  On the account of 'Test' in the activity monitor all the I see is the user 'Test' for all running processes.

  But 'Letsgo' account I see, of course, a lot of process for "Letsgo" but I also see other users as 'root' or '_spotlight' or '_appleevents '. The way I see it, these additional users are very similar to "default" OSX system accounting.

  Press 'CMD + S' to soon... Sorry... This should be added...

  And now the question:

  It is advisable to set up a Mac with the account of user by default when you first set up the Mac and keep this for purposes of administration and create a new account for day-to-day work? I want to upgrade to El captain in the coming weeks and want to do a clean install, if the implementation of different accounts is the best way.

• Disable the logging level for individual users

  Hello

  We want to stop individual users to record level. Usually, we go to identity and click on the user to set the log level '0', but we have LDAP security settings don't so have no idea how to do.

  All ideas

  Thxs

  SYK

  LDAP?

  Still, you can see the RPD users when

  IM-> Action-> Set Online user filter specific user

• How to reset the default configuration for the ATG Applications layer

  Hi all
  
  If we change the properties through the ACC files, they will be copied to default configuration (localconfig) layers. If I have several servers how can change the default configuration in the directory someother layer in my file system.
  
  
  Thank you
  Neya

  Create the CONFIG.properties in the configuration layer where you need ACCESS to make the changes.
  defaultForUpdates = true

  Peace
  Shaik

• Order of the necessary drivers for Satellite R630

  Hello

  I have a Toshiba Satellite R630, and I had some problems to install the drivers. So I would like to know the order of installation of the drivers and if I too istall any drivers or only Windows 7 drivers (for example for the common Module only exist a version of Windows XP)

  Any help is appreciated

  Thank you

  Can I ask you why you must install drivers?
  Ave you have your laptop with OS preinstalled or not?