'STRATEGY OF RETENTION' not of database is specific?

Similar Questions

• How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  How to find a specific voice memo file in the backup from my iPhone to my Mac? I know where to find the backup, but not how to recover specific files. Thank you.

  You can't look "inside" a backup. Just use iTunes to sync with your iPhone, then you'll see a separate category for voice memos in the sidebar.

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  This means what he says.  You do not have the minimum required VRAM.
  The minimum specs for the game is listed as 128 MB of VRAM, but is supposed to work
  on the graphics card integrated Intel 2000/3000.
  The amount of VIDEO memory dedicated on laptops is apparently determined by the FAB of the laptop.

  Without knowing which laptop, or if it is one that has a dedicated graphics card, I guess that your laptop uses integrated graphics that devotes too little of VRAM (64 MB?),
  If it does not the minimum requirement of 128 MB of VRAM.

• How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

  I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

  After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

  The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.

  • Of course, I tried to restart.
  • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
  • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
  • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
  • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
  • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

  Everything I try seems to have no effect on the resolution of this problem.

  Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

  Kind regards

  Alex.

  ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

  -Tried but not given to impact.

  ... "Step 2: System File Checker tool"...

  -Tried but not given to impact.

  ... "I would have you check the same DVD on another computer and check if it works. '...

  -The only other machine that I use Ubuntu. My other half uses only his Mac.

  I managed to work around this problem by using the following workaround solution:

  I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

  The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

• Performance card authorization: strategy tree is not showing

  Dear readers,

  I'm having a problem with the authorization of the scorecard, strategy tree will not show anything (including strategy tree or error message) it's just show me a loading sign up, here are the details:

  

  I set access rules in the administration of OBIEE like this:

  

  

  am I missing something? all answers are appreciated, thank you

  Concerning

  Answering machine: I forgot to create rules for authorization for shortcuts, and it's file

• What is the best strategy for the notes for ePub with Indesign?

  Hi, I created before .epubs.

  
  

  The fundamental question is this.

  When I export > ePub and display in the Adobe digital editions, I click on the reference number and nothing happens!

  
  

  Note 1

  A couple of days, it wasn't the case.

  I think the bottom has something to do with the question.
  

  I noticed that in the middle of the ebook, notes have been turned off by one.

  In Indesign, I manually changed all reference numbers in the foot and maybe that is the problem but I do not understand why.

  
  

  I think I should have been to change the note reference number in the content, not the footer.

  questions?  Why is it automatically refresh and fix all the notes.

  
  

  I read somewhere that I have deleted by mistake a reference in the footer, but that this does not update the reference number in the content.
  

  
  

  Note 2

  I created the ebooks in the past with success - workingfootnotes, but I'm rusty. Research online and in Adobetv and youtube, I didn't come on this question or tutorial.  I'm on cloud Adobe and using Indesign cc 2014.

  
  

  Note3.

  I went about creating an ebook in 2 different ways, and I do not remember why I did it differently or what is the best strategy.

  
  

  one.

  Each chapter and each page of the preliminary pages has been his own .indd

  and somehow I ended up together in a single file.

  Issue.  This has to do with the new > book. Rather than new > document?

  
  

  b.

  I have word for each page of preliminary pages and content documents.

  I PLACED the in my Indesign Document.

  I used paragraph styes to segment the ePub and use the chapter headings in my table of contents.

  
  

  Any questions about this process?

  I want each page specific issue before appearing as a new page and each chapter to start on a new page.

  I used export > options > split document but when I view it in ADE, they seem not to be new Pages.

  
  

  question?  What strategy is best?  Why?

  
  

  I appreciate the comments.

  There are a handful of individuals who are still monitoring and responding to this forum (4 years later) and I respect your advice.
  

  Regarding notes dialing number.

  • You mention that you use InDesign book to combine the different chapters in a single EPUB export: for each of these various documents, check the following: Type > Options Document reference. What is the number of defined starting to for each of the documents? They pursue all sequentially the last issue of the previous document in the book? It could be that you skipped a number there may be?
  • Otherwise by manually changing the numbers could inadvertently "broken" anything. You cannot manually select the number in the text of the note at the bottom of the page and change the number, that will not update the number of reference in the text. Your notes would be out.
  • My recommendation, in this case, I recommend that you re - insert references, to the help Type of InDesign help > Insert reference before you redo an EPUB export.

  On document splitting in some places:

  • When you enable Document Split, what other parameter did you get the permit?
  • If you are using based on the paragraph tag Style export, then to check export of marking of paragraph style settings in the Options of paragraph Style dialog box. is 'Split 'Document' option selected? AND in the different chapters and preliminary pages, check what paragraph style is applied to the first line of text in each paragraph must be broken. Each of them must have an applied paragraph style that has the ability to 'Split' "Document enabled.

  CARI

• is it possible to move the lotus notes .nsf database in thunderbird?

  Last employer uses Lotus Notes. They gave me with my database .nsf file. However, my new employer is using Thunderbird. The .nsf database can be imported or converted to work in Thunderbird.

  you will need to purchase on the NSF to EML or Mbox for NSF programs that are available on the web

• Help! Not clear the system specifications? Desktop compaq CQ5320Y... Want to upgrade CPU

  I have a Presario CQ5320Y desktop computer and I was looking at upgrading the processor to an AMD Phenom II X 4 965 Black Edition Deneb 3.4 GHz Quad-Core, in the specification system, it says the TDP is 95 Watts, but he has forward processer mentioned, who take 125 watts according to AMD, on the list of upgradable processor. I don't know if I blow on the motherboard or if it is designed to take this particular amoun just for this processor t?  Help!

  Here are the specifications of your desktop Compaq Presario CQ5320Y and its card mother M2N68-(Narra6). Based on the specifications, this model supports the following processors;

  Type of socket: AM3

  TDP: 95 watts

  AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  AMD Phenom II X 2 5xx (Callisto)

  II AMD Athlon X 4 6xx/6xxe (undactylopodite)

  AMD Athlon II X 3 4xx/4xxe (Rana)

  AMD Athlon II X 2 2xx/2xxe (Regor)

  AMD Sempron 1xx (Sargas)

  It's very clear... the system supports a subset of the list up to a maximum of 95 watts. If the CPU is valued at more than 95 watts, it is not supported. In addition, "Black Edition" processors are not listed and therefore are not taken in charge.

  Please send Bravo

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category

• BBM BBM not connected to a specific carrier network

  Hello

  Strange, there is a specific carrier that when I'm under is coverage, BBM is offline. I was told that it is due to the fact that this provider has no agreement with BB. I can hardly believe that I am able to use BBM on any WIFI network that Moody has no agreement with anyone.

  can someone tell what shell I have to say that carrier to allow BBM?

  I use Z10 running on 10.2

  Thank you.

  Brian,

  Thanks for the quick response. I'm happy that the person was OK and even better, I learned something new. I have contact the carrier who said that they do not have an agreement with BB, but I thought that it is irrelevant that I'm on OS10.

  The carrier is Golan Telecom in Israel. https://www.golantelecom.co.il/Web/

  Thanks again.

• GANYMEDE did not windows database authentication in AD.

  I wait with Ganymede installation in our environment using windows database authentication. However, I do not understand what I have to do on the RADIUS server to pass authentication to windows on our domain database. I have already created the user account special for Ganymede advertising and chooses widows database on radius server authentication option.  Local RADIUS authentication works fine but I would use the windows database

  and does not work. Can someone help me?

  Hi Michael,

  Basically, we need more information such as ACS you run and what version AD 2003, 2008 etc... bare in mind that version 4.0 - 4.2 AVS does not work with AD 2008 R2.

  Basically, we need a few more steps:

  1.) together until a computer account and the name of cisco

  2.) implemented local policies in your windows

  3.) are you installing ACS on your domain controller or on a member server?

  4.) ensure that GBA services run with the account that you have created in AD, you must specify the account appropriate rights...

  Basically, all the stuff mentioned above are more in detail here:

  http://www.Cisco.com/en/us/customer/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wpxref2582

  In ACS go to:

  Database of external user > database group mapping > Windows database

  and see if you can find area in it if so it will be just a matter of mapping of the security groups in AD with ACS groups...

  Also make sure you see aaa properly like this:

  !

  AAA new-model

  !

  !

  AAA authentication login default group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + authenticated if

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  GANYMEDE-server host GANYMEDE IP key PASSWORD

  RADIUS-server timeout 3

  RADIUS-server application made

  See you soon,.

  Fabio

• Failure of the update of the form of the IOM process | Error: Could not execute database read

  Hello

  I encounter the following error when I try to create a new version for a form of OIM Design Console process:

  Description: Could not run the database to read. The database has encountered a problem with the specified SQL query. Solution: Check the database query. Contact your system administrator.

  It does not matter that I use xelsysadm or any system administrator account.

  Details of the environment:

  OIM 11g Release 2 (11.1.2.1.0)

  
  

  
  

  Errors in the logs: (despite following errors I can update IOM DB Tables with SQL through SQL Developer queries)

  
  

  "Class/method: DBPoolManager/getConnection/Exception a few problems: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLRecoverableException: IO error: the network adapter could not establish the connection"

  
  

  Class/method: DBPoolManager/getConnection/Exception encounter a few problems: error connecting to database recovery. Please check the following

  
  

  Class/method: tcDataBase/writeStatement encounter a few problems: ORA-01407: cannot update ("PRD01_OIM". » « « « SDK ». » SDK_SCHEMA') with the NULL value

  
  

  Class/method: tcTableDataObj/updateImplementation a few problems: {1}

  
  

  Class/method: tcDataBase/rollbackTransaction encounter a few problems: Rollback performed

  
  

  Class/method: tcDataObj/save error: wrong to save SQL operation

  
  

  Please let me know if you have any suggestions.

  
  

  Thank you.
  

  
  

  I found the solution!

  I was going through this blog: OIM 11 g: error after startup server IOM: retrieve the connection at the base

  In the last comment by Amit, he mentioned that the settings IOM - config.xml must be changed.

  So I discovered that IOM-config file. XML from my environment, under directDBConfigParams, url (jdbc thin driver) was wrong because of cloning.

  In addition, OIMFrontEndURL, RMI and SOAP URL were wrong.

  I corrected the and guess what... each utility works...

  However, you don't have to import/export the config of MDS file... you can change these details in the following MBEANs

  1 DirectDB

  2. the discovery

  3 SOAConfig

  > Reboot the server of the IOM.

  I knew this jdbc driver was not, but did not know where to set it up.

  I have listed the error in my last comment, so that if anyone has this problem, the text of this presentation would help.

  Thank you.

• STRATEGY OF RETENTION and incremental backups.

  Consider the following scenario.

  Sunday: level 0
  Monday: level 1
  Tuesday: level 1
  Wednesday: level 1 cumulative

  If we make the recovery Friday, rman uses Level0, last level 1 and all logs after him. All other newspapers and incremental backups are not necessary.

  Now assume that the retention policy is window of recovery of 1 or 2 days. RMAN will review these logs and backups as obsolete Friday?

  Obsolete backups - backups are performed before the last full backup that is not obsolete. Because level 1 is not full backup, rman will retain all of the incremental backups and archive logs that are created after the 0 level.