Streaming waveform and waveform scripting - each other?

Similar Questions

• How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance

  How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance, as indicated in the figure below. and enter this signal in a data acquisition.

  

  At the time wherever you go for the beautiful diadram, you could have done the vi

  Your DAQ would like a waveform (table of values and dt ak 1/sampling rate)

  If you set the sampling rate you know the length of the array, create a matrix of zeros and set the values of the two amplitudes...

  Because I don't want to connect other duties here are some photos

  And it does have a few drawbacks leaves to be desired in my solution, just think... rounding errors and what might happen if the tables are becoming more...

  

• Can I create a page Web of Muse that it is child Pages could be open on different computers and communicate with each other?

  
  I want to create a Web site with 4 child pages that interact with each other when opened separately on 4 different computers.

  Is this possible?

  Example:

  Child 3-page Web site open on 3 different computers with triggers and the following objectives:

  PC #1 - child #1 - confirm button (trigger)

  PC #2 - Page #2 - accepted Confirmation Popup, resulting by clicking on 'confirm' page computer/child #1 (target)

  PC #3 - child Page #3 - calendar Popup changed, resulting by clicking on 'confirm' page computer/child #1 (target)

  Any ideas are much appreciated.

  THX.

  No this is not possible with Muse.

• How to select and move more than one bookmark at a time? Shift + click selects multiple items that are next to each other in a list, because the element

  How to select and move more than one bookmark at a time?
  Shift + click selects multiple items that are next to each other in a list, because the items open in firefox before that happens.

  Glad it worked for you. Thanks for posting back.

• How can I stop my iPhone and the iPhone and my wife to keep each other recent call logs?

  On my iphone and on my wife's iPhone, you can find each other's recent call history.

  It's new.  Since the beginning of the iPhone, we have synchronised calendars and contacts, but never synchronized "recent call" logs.

  How can prevent us this?

  We are both using the latest iOS on our iPhone 5s

  Steve

  You are both sharing the same Apple ID? If one of you should obtain and use a different ID to Apple. Apple ID are not intended to be shared between different users.

  You can then share apps, etc. by using the share of the family.

  http://www.Apple.com/icloud/family-sharing/?CID=WWA-us-KWG-features

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• I have Firefox and Internet Explore installed on my laptop, the question is, will they conflict with each other and should I get rid of one or the other?

  Hi, I have the browser explorer Firefox and Internet on my laptop, a friend told me that they will be in conflict with each other. the question is what I would do abouth this.

  Your friend has any idea. Both work very well.

• PC Windows 7 and Vista Home Premium computer network cannot access each other

  I have an a Premimum Vista computer with a USB printer on a network with a Windows 7 Ultimate Computer.  Both recognize each other both are visible in the network on both computers) but I can not access one or the other.  Message on window 7 says "your computer seems to be correctly configured but the resource does not."
  "Any suggestions?  I need to produce and share printers.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  In Vista, turn on password protected sharing. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. create shares as desired. In Windows 7/Vista I usually shares its office and the Public directory.

  E. After you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but that is beyond the scope of this answer. MS - MVP - Elephant Boy computers - don't panic!

• My husband has a laptop computer with windows 8 and I have a laptop with windows 7, we can share each other files or photos.

  My husband has a laptop computer with windows 8 and I have a laptop with windows 7, we can share each other files or photos. Is there a way to share our files and images? What is the problem is two different windows before carpet?

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  You should be able to share files between Windows 8 and Windows 7 very well.

  Walk through the following article to get your network configured properly.

  http://Windows.Microsoft.com/en-us/Windows/sharing-files-printers-help

• I have two computers in Windows 7 which will not each other on my network. All other computers will see and can share files, but they connect between them.

  My HP laptop has installed Win7 Ult, the Fujitus Win7 Pro.

  Both computers were sharing the files back, outside a residential group, for a period of time. One day, they are stopped. No changes have been made to computers. I tried a restore of the system on each of them, and it did not help. I re windows loaded on the HP and that did not help. I don't think that it is only a permission of the questions that I used a windows machine 7 third to map actions to each of the individual laptops using their respective IDs. I can transfer files from one of them the "machine in the middle", then the action of the other, or as a copy/paste between them directly.

  WSD and NetBT will not solve one machine for others, but all other computers on the network will dispay on each machine. Only, they refuse to see each other. I have disabled the firewall. Password protected sharing, ensured that all netbios in the registry settings are correct. Pings between them are inaccessible returnded.

  Any help would be appreciated.

  Thank you!

  Hi Jonathan,.

  I see that you two computers on the network cannot see each other. I'll help you with this problem.

  1. don't you make changes to the computers?

  2 are computers on a domain network?

  3. do you have a router connected to these computers?

  Method 1:

  Open the HomeGroup troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2.

  Make sure that the following services are enabled on the computer.

  (a) click Start, type "services.msc" in the search and click on services. Verify that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 3.

  I suggest you follow the steps in this article.

  Enable or disable network discovery: http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery

  Method 4:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Refer.

  Homegroup:

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/HomeGroup

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Floppy disks to install Windows 7 and the product keys are exclusive to each other?

  Floppy disks to install Windows 7 and the product keys are exclusive to each other?  Or can I use a disc that I have to restore the windows on a second laptop and activate it with a different product key?  It is not a question to find out how many users I can put in place, but whether the disk and product key are mutually exclusive.

  As long as the product key matches the edition, it should work perfectly, no exclusivity.

• DLR Uplink and GSS internal transit same VXLAN cannot ping each other.

  Start with, I run NSX 6.2.2 firewall rules on 'allow all' to 'all' to 'all' "all protocols", in other words disabled...

  I have a VXLAN 5000 transit, with an uplink DLR interface attached to it, and an internal interface GSS in the appendix in which neither of the parties can ping to another. So for troubleshooting, I added 2 VM Windows attached to the same transit VXLAN 5000, a virtual machine is on ESXi host 1 and the other is on host ESXi 4. They can fine ping each other, and two virtual machines can ping both the uplink of DLR and internal interfaces of the GSS.

  This question has puzzled me because it makes no sense, why the DLR and the GSS cannot ping each other but 2 virtual machines that VXLAN can ping all adjacent devices. I can even put bridges on those virtual machines with a rule NAT on the GSS and those virtual machines can get internet through the GSS, but no matter what I try, the DLR cannot ping the GSS, and the GSS cannot ping DLR...

  I need to define a static route between the GSS DLR <>- but if I can't even answer ping interfaces I'm dead in the water.

  If I install virtual machines in a network LAN DLR interface such as WebApp and test for example database, I can ping throughout the DLR together until the IP DLR Uplink, but then he cannot ping the GSS internal.

  Does anyone have suggestions for troubleshooting? Test commands that I can run? I tried many things and then lots of websites with the troubleshooting steps. Everything seems fine, all green checks in the installation steps... All roads, MACs, ARP tables appear as expected when I run test on host computers commands and controllers. I don't know what is the cause except for a bug in the code...

  All ideas are welcome... Thank you

  UPDATE:

  Yes, so it has need of a static NAT rule on the GSS...

  In my environment, I added a SNAT rule on adapter: ESG_Uplink with 0.0.0.0/24 CBC-translation dst: 1.1.1.101 (my lab ESG IP Uplink).

  It works now... VM tenant box connected to WebApp portgroup (192.168.13.115) can now ping gateway DLR, through routing OSPF to the GSS and ping on physical bridge of...

  I learned a lot on this one... I'm not going to worry about why the static route, I tried first post didn't work, since I was the OSPF running instead (which is more appropriate for my laboratory for realistic scenario anyway), and the Foundation will now suffice to build the rest of this POC vRA / vRO lab...

  Thank you in any case, sometimes it's just nice to have someone to listen.

• Issue of school laboratory: setting IPs &amp; VMnet1 so two computers can communicate with each other and to access the internet

  Hello ~

  This question has probably asked a million times in a way or another, but here's my specific: I'm a laboratory for school. I've set up two virtual servers (Windows Server 2012) in VMware Pro 12. The goal is to speak (see others). According to the instructions of the teacher, I set them up as follows:
  
  "Assign your appropriate servers of IP addresses based on your installation environment.  For example, if your network environment uses the class C address range 192.168.1.x, assign a server IP 192.168.1.10, 255.255.255.0 subnet mask, a default gateway 192.168.1.1 and the other server IP 192.168.1.11, 255.255.255.0 subnet mask, a default gateway 192.168.1.1.  Note: If these IP addresses will conflict with your internal network (provide your virtual machines with access to the internet), please choose a different set of address that will work for you. »

  
  

  I need to know what will work addresses. got a domain controller DC1.  Now, I can't see each other. I can't connect to Internet via IE which is one of the 'evidence' that I'm supposed to provide.

  
  

  When I go to the Publisher, I see as the guest only parameter (how is it said to set up when you first install the VMs) is 198.162.150.0. I did not who, but I'm a little but I don't want to make things worse by changing things. I guess that's where the problem is, but I'm not sure what to put the IP, default subset mask and DNS for so I'm stuck.
  
  If it means anything, it is in fact on a borrowed laptop which is connected to the WiFi and wireless. The laptop has internet but I don't know how exactly bringing on the virtual machine when it come to be able to connect. I don't need to become an admin system; This is a compulsory course and I'm just trying to understand enough about it to pass. The problem is that other labs are constructed on it so I can't just ignore it.
  
  Any advice you can offer would be GREATLY appreciated. By the way, happy new year to you all.
  

  Sorry, yes it was a typo. It's supposed to be 192.168.150.xxx.

  Although the virtual machine must be able to communicate if they are both configured similarly (i.e. host only in this case), you generally EF IP addresses in the subnet host only for those virtual machines to be able to access it from the host, which - as mentioned earlier - should have an address of VMnet1 IP of 192.168.150.1.

  André

• Is there a way or a widget in Muse, allowing the objects and images to react with each other?

  Hello. I would make both objects or images imported into Muse react with each other. When I say react, think of a ball bouncing off a wall or a pool ball hitting a bunch of other billiard balls. I searched for a widget that might allow cela and couldn't find one. Is this something that can do Muse, or should I look for something else... edge or the interaction of coding? Thank you.

  You can do using the edge, then publish it in the "animated dashboard deployment package", ".oam".

• Two VMS on different networks and ping each other

  Hello

  I'm using VMware Workstation for the first time. I have two VM and I want them to be on two different networks. I want that networks be able to ping each other. I did research on this since yesterday and nothing seems to work. Perhaps I am confused with the bridge, the Nat and host-only adapters. What I have is:

  VM1-> has two network adapters: VMNET1-Host-Only (192.168.247.128) and VMNET8-NAT (192.168.42.130)

  I'm not able to have the internet connection on the HOST only

  VM2-> has a network card: VMNET8-NAT (192.168.42.129)

  Each virtual machine I can ping everything on the other virtual machine, but it seems a little odd.

  Is there another way to do this?

  Thank you very much

  Geneviève Nantel

  Although you can create several networks in VMware Workstation, there is no possibility of embedding to do the routing.

  André