string from hour to hour

Similar Questions

• concatenate the strings from a column into a single row?

  How to concatenate strings from a column into a single line?
  
  Color
  ------
  Red
  Orange
  Blue
  Green
  
  And return a set of results as follows:
  
  Colors
  -------------------------
  Red, orange, blue, green

  Various ways can be found here:
  http://www.Oracle-base.com/articles/10G/StringAggregationTechniques.php

• How to read strings from a file data?

  Hello

  I have a little. CSV files, which were inside the trees channels (load force, opening force, distance) captured from both engines.

  I want to load multiple CSV files and analyze only two strings (opening force and distance of travel) and send them to a report (go the distance on the x-axis and opening force to the y-axis), but in this report as all channels of all CSV files I have loaded. (make a multiple load)

  My question is how can I read csv files the channels I'm interested and then analyze?

  I use this example to HELP to load the data:

  Dim MyFileNames, iCount
  Call FileNameGet ("ANY", "FileRead", "D:\BOF-MIU\BOF Dim", "data CSV (*.)") "CSV), *.csv", "All.lst", True, "data selection".
  MyFileNames = Split (FileDlgFileName, "|")
  ICount = 0 to Ubound (MyFileNames)
  Call DataFileLoad (MyFileNames (iCount))
  Next

  "and then I try to analyze, but I don't know how to divide the csv file to get only the channels I want."

  Call ChnSmooth ("filedlgfile &" [1] / axis 1: Position (uu) "," / smoothed ', 12, "maxNumber" "...) Y, E, SmoothWidth, SmoothType

  Thank you for your time.

  HI Maria,

  Here is the approach to file dialog you asked--use it instead of the "FilePaths = GetNaviSelFiles()' in the command script I sent you:

  DlgTitle = "insert a file dialog title here...". »

  StartPath = ProgramDrv & "Libr\Dat\".

  FileExts = ' *.» DAT; *. TDM.

  Call FileNameGet ("All", "FileRead", StartPath, FileExts, "No", True, DlgTitle)

  FilePaths = Split ("|" & FileDlgFileName, "|")

  The trick in the TDR file I sent you was set up for mode "exanding" in the "Page layout settings" dialog box  It is an old display option that can cause problems if used in bad situations, but it seemed that it would make your life easier for this particular task.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Concatenate the strings from VISA

  Hello people,

  I'm still fairly new to LabView, please bear with me.

  I'm interested in doing a Subvi, which will receive bytes on a VISA from serial port and write each line to a greater (concatenated) string, so it can later be stored in a file. In simple terms, I want to save all the data on the serial port for 8 tests to be completed. There will be 6 cases of this in the parent VI, so he needs be modular.

  I expect a series of 8 channels of the source serial communication, each line begins with "Success" or "Failed" then the test. for example:

  Past test1

  Failure of test2

  Past of test3

  Past of test4

  .

  .

  .

  The current method I use must react when there are present bytes in the buffer in series, and then identify a match (currently it only identifies a match of 'Success').

  Is it possible to get a match for the substring to 'Success' OR 'failure '?

  How can I place all these strings on a chain? Concatenation of strings do not work because I'm having the same input string of the VI...

  Any help/input would be welcome, thank you.

  Here is a basic example of using to concatenate strings. Since it is always very difficult to know if you call your Subvi several times or if you call once and want to to read all the results I won't comment much more on it. This example would read all the results and the output format string you want to write to a file later or do whatever you want with it. The basic constructs of what you will need are illustrated here. How to encorporate in your application will be difficult to say without any code beyond the wick you have posted.

  

• separate strings from a long list

  Hello

  I'm trying to get distinct values in a list of strings separated by commas.

  for example,.

  Select distinct ename from emp

  where instr ("BLAKE, CLARK, JONES, SCOTT, BLAKE CLARK, JONES, SCOTT, BLAKE CLARK, JONES, SCOTT, BLAKE")

  CLARK, JONES, SCOTT, BLAKE, CLARK, JONES, SCOTT, BLAKE, CLARK, JONES, SCOTT, BLAKE, CLARK, JONES, SCOTT, BLAKE ', ename) > 0;

  It gives the result. When there are huge name lists (which is more than 4000 bytes) it gives the error as "string literal too long."

  How to get distinct values in a long list.

  Any help would be great. I tried with regexp_substr and also the function TABLE (comma_to_table. everything works for the list with 4000bytes and below.)

  Nothing is taking the long list of the values of more than 4000 bytes. Help, please.

  Thank you

  KJ

  An iteration to create your lists is not the most effective approach, I personally use listagg and chunk 4 k of lists, but I'm so busy, as a quick solution for you, try the following...

  create or replace function 'GET_EMPNAMES' (SERIALNUM in number) return as clob

  V_NM CLOB: = ' ';

  cursor C is

  Select distinct ENAME

  from EMP

  where SNO = SERIALNUM;

  Start

  for CAASS in C

  loop

  V_NM: = to_clob (AHACS. ENAME | ',') || V_NM;

  end loop;

  Return V_NM;

  end;

  create or replace 'GET_FILTERED_NMFN' (FILTERED_NAMES in clob) return clob is

  LIST_OF_NAMES CLOB: = ' ';

  ALLNAMES cursor is

  Select distinct E.ENAME

  EMP e

  where INSTR (FILTERED_NAMES, E.ENAME) > 0;

  Start

  I'm in ALLNAMES

  loop

  LIST_OF_NAMES: = to_clob(I.ENAME ||) ',' )|| LIST_OF_NAMES;

  end loop;

  Return LIST_OF_NAMES;

  end;

• Extract the string from the string

  Hello guys,.

  I have a small question. I would like to extract a string to another string. Imagine the following string:

  param1 = value1 param2 = value2, param3 = value3, param4 = value4

  I would like to be able to extract value2 and value3 to this string. I know that the design of the db is not perfect and should be like this. but it is historical and I have to use this way. Any suggestion?

  Thank you

  to retrieve param2

  Select

  substr (s

  , instr (s, '=', 1, 2) + 1

  , instr (s, ',', 1, 2) - instr (s, '=', 1, 2) - 1

  ) r

  from (select "param1 = value1 param2 = value2, param3 = value3, param4 = value4's double)

  or

  Select regexp_substr (your_string, "[^,] +' 1, 4") from your_table

  for example

  Select regexp_substr ("param1 = value1 param2 = value2, param3 = value3, param4 = value4 ',' [^,] +' 1, 4") param2 double

  PARAM2

  'value2 '.

  Post edited by: chris227
  Corrected solution substr (sorry was before the first coffee ;-))

• Select a string from beginning random position with a specific set of characters

  Hello everyone, here is my database information:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  I'm trying to find a way to do something like that.  Say I have a string in the middle of a string I need to extract.   For example:

  (1) 8781FAHH911122as3_2

  (2) 877aa-FAHHa222xa342_1

  (3) F_FAHH10aa49933

  (4) FAHH123412341R

  (5) FAHH457894126

  What I want to it would be whatever it either starting from the FAHH and the 9 digits after so for the above, I would like to:

  (1) FAHH911122as3

  (2) FAHHa222xa342

  (3) FAHH10aa49933

  (4) FAHH123412341

  (5) FAHH457894126

  I looked at using left/right/substring but my problem is that the part I want could be in a place randomly within the chain, so I can't designate a starting position.

  Any help would be greatly appreciated.

  Thank you

  -Steve

  switbeck wrote:

  Hello everyone, here is my database information:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  I'm trying to find a way to do something like that.  Say I have a string in the middle of a string I need to extract.   For example:

  (1) 8781FAHH911122as3_2

  (2) 877aa-FAHHa222xa342_1

  (3) F_FAHH10aa49933

  (4) FAHH123412341R

  (5) FAHH457894126

  What I want to it would be whatever it either starting from the FAHH and the 9 digits after so for the above, I would like to:

  (1) FAHH911122as3

  (2) FAHHa222xa342

  (3) FAHH10aa49933

  (4) FAHH123412341

  (5) FAHH457894126

  I looked at using left/right/substring but my problem is that the part I want could be in a place randomly within the chain, so I can't designate a starting position.

  Any help would be greatly appreciated.

  Thank you

  -Steve

  You would like to add Instr. If you'd a SUBSTR with a nested INSTR to find your starting point to start the substring.

  You can also use regular expressions, but they are quite CPU Melow

  See you soon,.

• Verification of an element in one string from another string

  Hi guru,.
  
  I have 2 strings separated by commas. Say it like that.
  
  a VARCHAR2 (100): = '1,2,3,4,5,6,7,8,9,10';
  b VARCHAR2 (100): = '2,6,9';
  
  My requirement is like I want to check the chain has, if it has all of the b element. I am using the regular expression. But I wasn't able to do.
  Kindly help me.
  
  Kind regards
  VJ

  Hello

  I'd probably use the Michaels, but if you want to see how you could do this using regular expressions:

  SELECT     *
  FROM     table_x
  WHERE     REGEXP_LIKE ( ',' || a || ','     || '/' ||
                  ',' || b || ','
                , '(,[^,]+,).*/.*\1'
                )
  ;
  

  where "/" is known not either a or b.

• Parsing HTML in strings from to and input XML

  I'm loading an XML file in a bunch of text (and other data) in text fields dynamic on my stage via a call XML.load. Here is an example of an entry in my XML file:
  
  < stillDescriptions >
  < text > Mack Trucks of North America came to us to help create marketing for their Diesel MP7 engine materials.
  < / text >
  < / stillDescriptions >
  
  I would like to be able to create HTML links in these strings between tags < text > I have in my XML file so that a user can click on the link that is inserted into the dynamic text field.
  
  I can't get this to work. If I place typical of HTML tags in my strings of XML - tag, it does not get analysis as HTML. As it, it does not - text string is truncated after hitting the first HTML tag. Logical as it can be expected from the XML tags instead of HTML tags?
  
  < stillDescriptions >
  < text > Mack Trucks of North America came to us to help create marketing < b > < a href = www.blah.blah > materials < /a > < /b > for their engine Diesel MP7.
  < / text >
  < / stillDescriptions >
  
  Y at - it something to do, or is this not possible?
  
  Any info would be most appreciated.
  
  Thank you and good day,
  
  -john

  SCHwwwinnnng!

  That's it - sort of... It restores to correctly in my field of dynamic text, in any case, but with two strange things:

  (1) the focal point for the link is not only within the area occupied by the related underlined words, it seems that the length of the expression of a hypertext link, the larger the area below all the way to the lower limit of the dynamic text field.

  (2) - I'll post this in a new thread - link works fine and dandy in a trial within Flash. but, as soon as it is embedded in HTML and read in a browser, the link does nothing. I can click forever, but, alas, my link does not open.

  -john

• Search and replace the string from a result

  Hi all
  I want to search a "("or ")" of the chain and all want the string before replacing "(" with a blank space...
  
  
  for example
  If the result comes like this
  name
  12 #122 (on the opening balance)
  I want the result as
  
  name
  on the opening balance)
  
  means
  12 #122 is replaced by "" how
  
  
  thanking you
  Gaurav Sontakke

  Like this?

  WITH t AS
       (SELECT '10 #10 (moving standard to msp1004)' str
          FROM DUAL
        UNION ALL
        SELECT '13208 #0' str
          FROM DUAL
        UNION ALL
        SELECT '2002-02-22 #10' str
          FROM DUAL)
  SELECT SUBSTR (str, 1, INSTR (str, '#') - 1)
    FROM t
  

• Get a string from a selected path

  Hello

  I have the following piece of code in my script (which works fine)

  Dim result: result = DirListGet ("C:\","*.adf","filename","FullFileNamesRecursive")

  Instead of simply using the phone book "C:\". ", I would like to invite the user to choose one.

  I tried to use Application.DlgPathSelect as PathNameGet select a path, but I don't know how to put a string representing the path selected in the above DirListGet method.

  Thanks in advance,

  Omar

  Hello Omar.

  Use it like this

  If "IDOk" = PathDlgShow ("select a directory for the adf files", "C:") then
  
    Dim result: result = DirListGet (OutPutPath, "*.adf", "filename", "FullFileNamesRecursive")
  
  end if

  Greetings

  Andreas

• LabVIEW MoveBlock and obtaining of a string from a DLL (assigned by the DLL)

  Hello classmates addicted LabVIEW,.

  I have a small question about the LabVIEW MoveBlock function.

  For a project I need to use an external DLL that must be called by my LabVIEW program.

  Essentially, the DLL returns a void * to a buffer and the size of the buffer (size_t). This stamp is just the string being returned by the DLL data. The DLL allocates these data and later in the program that I need to pass this pointer to a second function of the DLL to explicitly inform the DLL that I made using the data, so it can release these data.

  Here is the documentation for the function I want to use:

  Since you say the works of XNode, then you're dealing with a pointer and not a handle (pointer to a pointer), so you should be to pass the address of MoveBlock by value and not as a pointer to a value.

• How to extract a string from a TextRange

  Dear Experts,

  How can I retrieve the string "=? UTF - 8? B? LDvGhsLCBGcmybYk? ="between the markers of coding?

  Currently, I am able with the help of code as

  \starttext = activeDoc.Find (startText.beg, findParams);

  to find the exact begins and demand an end to the chain and I created the Base64TextTextRange.

  With the statement activeDoc.TextSelection = Base64Text; I can highlight the text in my document.

  I tried further with

  Base64Item = activeDoc.GetTextForRange(Base64Text,Constants.FTI_String);

  Base64String = Base64Item.toString ();

  But still, I am not able to see the string in the object of the Toolbox browser.

  Note that I do not use the GetText method because the string is only part of the paragraph.

  Thanks for the tips.

  The GetText method, you get an array of text elements. You need to assemble the parts of the string of the text element of individual objects in a single string, then fing encoding markers. Assuming that your Base64Text is a range of valid text, your code should look like this:

  var saTextItems = activeDoc.GetTextForRange (Base64Text, Constants.FTI_String);

  var i;

  var sFullText = ";

  for (i = 0; i< satextitems.length;="" i++="">

  sFullText += saTextItems [i] .sdata;

  var iPos1 = sFullText.indexOf ("=?") + 2 ;    / * assuming =? is the beginning marker and adding 2 to point to the first position behind it * /.

  var iPos2 = sFullText.indexOf ('? ') =", iPos1);   / * Add the start shifted for good measure, but that may not be required here * /.

  var sBase64String = sFullText.substring (iPos1, iPos2);

  Alert (sBase64String);

  I would like to know if it works for you. And mark the answer as correct if it does.

• Get a string from an iterator object. Help

  Hello community,
  
  I have this code fragment in my application and it complains about this line:
  
  strGUID = (String) it.next ();
  
  I'm trying to get the string that I'm pulling in the loop so I can handle. The funny thing is that I am able to print the entire string like this:
  
  out.println (attrName + "=" + it.next () + "< br >");
  
  But I wan to store this string in a variable, and I can't. The code is below. I have bolded two statements that I try to use to store the string in a variable, and it does not work. Advice please?
  
  
  If (uploading! = null) {}
  out.println ("< tr >");
  out.println ("< td valign = top > < attributes b >: < /b > < table >");
  Iterator iter = attrs.keySet () .iterator ();
  out.println ("< td >");
  String strguid = ""; " *
  While (iter.hasNext ()) {}
  String attrName = (String) iter.next ();
  Set attrVals = attrs.get (attrName) (HashSet);
  If ((attrVals! = null) & &! attrVals.isEmpty ()) {}
  Iterator it = attrVals.iterator ();
  While (it.hasNext ()) {}
  out.println (attrName + "=" + it.next () + "< br >");
  * strguid = (String) it.next (); *
  }
  }
  }

  Strange that it fixes the problem now, but when you "which tried" above it did not work.

• extract a string from a string

  Hello
  
  Wanted to still know a thing in obiee 11g
  If I need to do something like this
  
  a String-> [email protected]
  and I need to take the abc's of him.
  So how do.
  
  I thought to use SUBSTRING (long expr FOR startPos)
  as stratPos is 1, then the length is 1 @-1
  but then is there an instr function in obiee?
  
  Thank you

  Try this:

  LEFT (tablename.columnname, LOCATE('@', tablename.columnname)-1)