String index out of range: 0

Similar Questions

• Error Unc.Exception for blackBerry 8310 Curve Smartphones: string index out of range: 0

  I get the following error message: "Eception Exception: string index out of range: 0" and no way to clear the message.

  Could someone help me to fix it? In fact, the only way to get the BB 8310 back to work is the battery.

  Thanks adavance

  You continue to misinterpret the contractual agreement for the support that YOU are bound to. You should contact your mobile service provider who can escalate your case RIM, how the ability to submit the report could well exist.

  All this debate aside courses... 9 times out of 10 if people just try some things in my first response, it solves their problems... normally a clean OS Reload did the trick as a "worst case"... that or update the operating system to something more current.

• java.lang.StringIndexOutOfBoundsException: String index out of range: 22

  Hi all

  I developed a relationship in the generator and a form of parameter in the form builder.

  I'm passing a number of the report parameter. For most values of the generated reports are perfectly fine.

  However, for input bit I am facing the following error:

  +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  java.lang.StringIndexOutOfBoundsException: String index out of range: 22

  at java.lang.String.charAt(String.java:444)

  at oracle.reports.rwclient.URLParser.parseQueryString(URLParser.java:142)

  at oracle.reports.rwclient.URLParser.parseQueryString(URLParser.java:68)

  at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1382)

  at oracle.reports.rwclient.RWClient.doGet(RWClient.java:366)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)

  to com.evermind [Oracle Application Server containers for J2EE 10 g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter (ResourceFilterChain.java:65)

  at oracle.security.jazn.oc4j.JAZNFilter.doFilter (unknown Source)

  to com.evermind [Oracle Application Server containers for J2EE 10 g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke (ServletRequestDispatcher.java:663)

  to com.evermind [Oracle Application Server containers for J2EE 10 g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal (ServletRequestDispatcher.java:330)

  to com.evermind [Oracle Application Server containers for J2EE 10 g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:830)

  to com.evermind [Oracle Application Server containers for J2EE 10 g (10.1.2.0.2)].server.http.HttpRequestHandler.run (HttpRequestHandler.java:285)

  to com.evermind [Oracle Application Server containers for J2EE 10 g (10.1.2.0.2)].server.http.HttpRequestHandler.run (HttpRequestHandler.java:126)

  to com.evermind [Oracle Application Server containers for J2EE 10 g (10.1.2.0.2)] .util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)

  at java.lang.Thread.run(Thread.java:534)

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  I tried to run a form of parameter in debug mode, but after running successfully setting-form code, this error is thrown at the end leaving me in a dark room at the exact location of the error of debugging.

  We hope to get a good sense of you people.

  Kind regards

  Misbah Mehboob Awan.

  If you look at your example you & sign that is not escaped.

  P_SUIT_NATURE = suit % 20% 20Declaration % 20&% 20Permanent % 20Injunction

  replace & sign with 26%

• String index out of range-2

  I tried to solve this problem for some time and may not know what the problem is, I have a form of three pages (each page shows in the next and past the form values in hidden fields) who when he submits to the action page comes up with error message string index out of range-2 , I checked, checked, double and triple checked my code for spelling mistakes or lack of form fields, but everything seems fine. I enclose the code page of the action page and the submission page, anyone who might be able to shed light on this will be either highly praised!
  
  

  I finally thought to it, despite overlapping each page several times for misspellings, I found that I had a field with a misspelled domain name. The way I found it was to remove the formfields cfinsert statement attribute, which then came and told me that "n/a" not found in the table, so by deleting this rogue 'i', I found the problem!

• BlackBerry Smartphones Eception exception String index out of range: 31

  Cannot get into my messages. Have tried all the restarts, and a wipe, and has not been corrected.  Please help someone!

  Hi mel1545

  You have recently installed applications?  If so, I'll try to uninstall and try again.  If you install all the applications, I suggest to make a backup of your BlackBerry smartphone and then reload the software as described in the article below:

  KB11320 - how to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...

  Thank you

• Error running of CFCS. Parameter index out of range (2 > number of parameters, which is 1)

  Hello

  My CFC component is defined as:

  < name cffunction output = "updateNote" = "false" access = "remote" returntype = 'Cancel' >

  < name cfargument = "notedetails" required = "true" type = "string" >

  < name cfargument = "notename" required = "true" type = "string" / >

  < cfquery name = "qupdateNote" datasource = "notes_db" >

  UPDATE

  Notes

  SET

  Notes.notedetails = < CFQUERYPARAM CFSQLTYPE = "CF_SQL_VARCHAR" VALUE = "#ARGUMENTS.notedetails #" >.

  WHERE

  notename = "< CFQUERYPARAM CFSQLTYPE ="CF_SQL_VARCHAR"VALUE =" #ARGUMENTS.notename # "" > ""

  < / cfquery >

  < / cffunction >

  In Flash builder when I test the operation I get this error:

  "There was an error when calling the operation. Check your server settings and try to call again the operation.
  
  Reason: Server error unable to invoke CFC - error running query database. Parameter index out of range (2 > number of parameters, which is 1). »

  IM quessing that it really is something small, but now its making me pull my hair on my head! Arghhh. Tried a lot of things but I know thik im stuck.

  Help would be very much appreciated.

  Thank you

  The sql error is a comma.

• Error "Index out of range" on search query

  I have a configuration of search query to clear my listview and insert new results of the query in the listview. The code looks like this:

  {OnDataLoaded}

  _APP. Clearlist

  root. ListView.insertlist (Data)

  }

  {OnQueryChanged}

  Load();

  }

  But unfortunately, whenever I do a query, and as a result appears my query update (triggered from a contextual menu) does not work and gives me the error "Index out of range". Even if the results of the query to fill listview very well and when I tap on a result it shows all data fine as well.

  And FYI the update query does not work when the list is not be searched or filtered so I don't think that there is a problem with my function.

  What I am doing wrong?

  He solved.  The problem is that the update function trying to remove and add the updated item within the filtered datamodel causing problems.  I just got the datamodel to load before performing the functions as described below:

  bool App::updateObject(const QString &id, const QString &name, const QString &description, const QString &datefield, const QString &lat, const QString &lon, const QString &categoryfield, const QString &mapurl, const QString &itempic)
  {
      bool updated = false;
      bool saved = false;
  
  //    if (!validateID(id))
  //        return false;
  
      Location *location = new Location(id, name, description, datefield, lat, lon, categoryfield, mapurl, itempic);
  
      // Find location in the datamodel.
      // Only the id is used by find(). This is because location
      // defines equality (==) as having the same id. (See the definition of "=="
      // in the location class.)
      const QVariantList updateIndexPath = m_dataModel->find(location);
  
      // update the item if found
      if (updateIndexPath.isEmpty()) {
          alert(tr("Object ID not found."));
          updated = false;
      } else {
          load();
          updated = m_dataModel->updateItem(updateIndexPath, location);
      }
  
      // Save the datamodel if we updated something.
      if (updated) {
          m_storage->deleteFromDB(id);
          saved = m_storage->save(m_lastCustomerID, m_dataModel);
          load();
          refreshGroup();
  
      }
  
      return (updated && saved);
  }
  

• Run the error 9 times index out of range

  When I run a program and sync with it, I get an error: run index error 9 times out of bounds.

  the program runs perfectly on XP but not on vista

  It is quite possible that the program works well in a virtual machine. I fear that only the developer will be able to figure it out for you. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

• Index of string out of range:-22

  I get the error message "String index out of range:-22" for my cffile, here is the code cffile upload. The error indicates what is happening on the line of cffile.
  
  < cffile action = "upload" filefield = "form.new_file" destination = "X:\Inetpub\wwwroot\Training\NewSite" nameconflict = "OVERWRITE" > "
  
  The file is sent through the form below:
  < action = "ilearntutorialchange.cfm cfform" method = "POST" name = "theaddition" enctype = "multipart/form-data" > "
  
  < input type is "File" name is "new_file" >
  
  < input type = "submit" name = 'Add' value 'Add' = >
  
  Dumping variables in the page gives me
  new_file = E:\CFusionMX7\runtime\servers\coldfusion\SERVER-INF\temp\ wwwroot-tmp \neotmp22674.tmp
  Add = Add
  FieldNames = add new_file
  
  I use MX 7. If I try to download a file on the same server, I receive "string out of range index:-2" I tried to look in the CF administrator, but I'm not finding where I check the settings of cffile. If I need to make changes to the administrator can someone tell me where to find it?
  Thank you
  

  Thanks for all the tips. I finally got it work on the test using MX7 area but not on the production server (go figure).

  This code works
  

  This could help others to know that the String Index out of range is one of these error messages that fits many error scenarios. I started to notice that change the destination path, change the number in the error message as in "String index out of range:-or - 22 or -2-10 17.

  For others with the same question try to look at the first destination path. Thanks again for the help.

• The index of the frame out of range

  I use Lynda SG training and becomes the first 01_01_interface example Frame index out of range. Files in Adobe Bridge are .mov and a rate of 23.976 which is what I put in the reading and editing-> Base frame rate in SG. I can load the files in first and they play normally in the timeline panel.

  Thanks to Robbie Carman for his great support on this issue. The resolution is to remove and reinstall SpeedGrade. I know, big hammer approach, but I didn't want to be down until the developers could watch and hopfully they know what triggers this error in their code and will come with a fix in a future update or release. It would be great to hear from Adobe if there is a more simple solution and a lot less time.

• RangeError: Index '-1' specified is out of range. "

  Hello

  Whenever I try to deselect a checkbox I get this error

  
  

  RangeError: Index '-1' specified is out of range.

  at mx.collections::ListCollectionView/removeItemAt()

  
  Can someone guide me in this?

  Thank you

  HI tuliptaurus,

  I think that the problem lies in the function below in the first line of code:

  public void removeField(field:Object):void
  {
  var int index = selectedFields.getItemIndex (field);
  selectedFields.removeItemAt (index);
  }

  That includes your getItemIndex (field) function... I think the problem is in this function, since in this function, you try to getItemIndex based on the subject field... If there is no exact match in the service of this function is return to index = - 1, so in the removeField() function you are trying to remove the item at the index 1, that real-time does not exist then it throws the error.

  So you must first examine the function code getItemIndex() that it returns the correctIndex if not then write a check in removeField() function

  public void removeField(field:Object):void
  {
  var int index = selectedFields.getItemIndex (field);

  If (index > = 0)
  {
  selectedFields.removeItemAt (index);

  }
  }

  Try to publish the getItemIndex() function...

  Thank you

  Jean Claude Chari

• Why do I receive errors of internal software: Terminal Index out of Bounds. Code error-61350, when compiling my FPGA VI for a cRIO-9118 using NI 9223?

  I get the error (in a popup window) when my VI FPGA code in chassis 9118 OR NI 9223 module compiled help.  This error occurs when compiling the process (generating intermediate files, scene 7 of 7). How to solve this error?

  Thank you

  additional information:

  Original error message:
  -------------------------

  Errors:

  Software (s) internal error: Terminal Index out of Bounds.

  :-61350 error code

  Details:

  A terminal with this index does not exist on this block diagram node.
  NiFpgaHandleCallbackError.vi

  «"" "String of full appeal:»»"»
  NiFpgaHandleCallbackError.vi
  niFpgaNodeInformation.lvclass:Get Const Variant.vi
  DfirModGen.lvclass:GetConstant.vi
  niLvFpgaMungerBrainwashIONodeCommon_Dfir.vi
  niLvFpgaMungerBrainwashSingleIOGrowableMethod_DFIR.vi
  nirviEIOMethodImplementation_SpecifyDFIR.vi
  nirviEIOMethodImplementation_SpecifyDFIR.vi.ProxyCaller

  

  Hi tesa,.

  This is a bug that has been fixed in LabVIEW 2012 SP1. The number of CAR created for this bug is 332811 and as you can see in this link, it is already in the list of bug fixes.

  Carmen C.

• Monitors flicker and "Input Signal Out of Range"

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  After research, I tried to start safe mode, but the problem persists.

  I read that put the computer to sleep and then wake up could solve this problem... it worked a

  couple of times, but the issue soon returned.

  I tried to reset several times VRAM/LANDAU and SMC.

  I doubled checked all the connections.

  Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.

  I also reset both monitors to factory settings via the menu screen of the monitors.

  I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)

  My Information System > Hardware > graphics/display info is:

  Graphics Intel HD 4000:

  Chipset model: Intel HD Graphics 4000

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0 x 0166

  Revision ID: 0 x 0009

  Exhibition:

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3171PFF

  Mirror: on

  State of the mirror: mirror material

  Online: Yes

  Rotation: support

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3170P31

  Main screen: Yes

  Mirror: on

  State of the mirror: mirror of Master

  Online: Yes

  Rotation: support

  I am of the ideas of what else to check/try.

  Thanks for any assistance that anyone can provide.

  bdcs64 wrote:

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.

  Personally, I will try a few things.

  1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.

  https://www.iFixit.com/device/Mac_Mini_Late_2012

  2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.

  (I know he'll be a brake after obtaining used monitors to double)

  3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.

  http://www.CrystalIDEA.com/Macs-fan-control

  FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.

  I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F

  

• HP 2509 b monitor guard displaying "Input Signal Out of Range" and then go to sleep.

  I went on vacation and shutdown my computer for 2 weeks.  My monitor worked great for a month before.  I came home last night and turned on my system this morning.  Now I get a white message in the middle of the screen with "input out of range Signal. Change the settings for 1920 x 1080 at 60 Hz"and then the screen goes to sleep.  I can turn the monitor off, wait a moment and then turn it back on again, but continues to repeat the same thing.  I checked and the screen is already set to 1920 x 1080 at 60 Hz.  I use VGA and have the default positioned like this.  I followed the guide to troubleshooting online for this error, but it did not help.  Can someone tell me please how to fix this?

  Finally, I got this figured out!  Here's what I did.

  Control Panel

  Display

  Parameters

  Advanced

  Intel(r) Graphics Media Accelerator Driver

  Graphics properties

  Display settings

  Expansion of the display

  Chosen at this stage full screen (no border) instead of "maintain proportions"

  As soon as I put this the error screen disappeared!  Can someone explain to me why this adjustment has been around?  I would like to know.

  Thank you all for your help.

• Unable to connect PS 2 to tToshiba 19W330DB TV - "out of range" msg

  PlayStation 2 for as much as I know only need the ypbpr lead to connect to the TV.
  I have connected the audio cables very well, but when it comes to connecting the video cable (yellow), it seems to be wrong.

  When you turn the console on the initial screen for playstation comes in black and white.
  The screen flashes then a little and the message 'out of range' appears.

  Someone at - it ideas on how to connect?

  Hello Laura

  Please don't be crazy on me, but this is the support forum for the Toshiba COMPUTER system. If you have connection problems Playstation 2 I recommend you contact the manufacturer of the Playstation support. They know how to manage with own product.