String to find to arraydatamodel

Sorry if this has been asked before, but I'm having a hard time finding an example that shows how to search for a string within a datamodel.

I have an ArrayDataModel that fills a listview and works very well.  I want to do is access the datamodel from outside the listview data and get out of her.  I have an imagebutton control that when I want to search the datamodel for a variable and tell me what line number in the table of this string is pushed.

I tried ISE .indexOf and a loop, but I can't seem to make it back everything except-1 even if I know the test string is in each line.

Again, sorry if this has already been asked.  New to this and I am puzzled. I suspect it's pretty basic for those who have experience.

If your items are JSON objects. This means that you can not use indexOf to find just a string, you must search for any item object

1. for example if I ArrayDataModel with this type of elements {firstname: 'test', name: 'test'} so I can't use indexOf like this

model.indexOf("test")

but like this

model.indexOf({"firstname": "test", "lastname": "test"})

2 I can use for loop search point corresponding to a property like this

for example I want to search by firstname

var indexPath;
for (var i = 0; i < model.size(); ++i){
    var item = model.data([i])
    if (item.firstname == "test"){
        indexPath = [i]
        break;
    }
}
console.log("Index of found item: "+[i]);

It may be useful

Tags: BlackBerry Developers

Similar Questions

  • How to use a String function Find() during a Test of a string value?

    Hello

    I intend to match a substring of the string returned by my USE when the use of a string value test - call of VI.

    I write the string returned for a string variable local (Locals.data_read) and tab limits - under the expected string value using Find (Locals.data_read, 'Connected'). When I check the expression to find errors - I get a warning "expected a string number found {comma floating 64}.» This value will cause a runtime error. »

    What Miss me?

    Thank you

    Kech

    Here is an example showing both.

  • Fill out the strings of QSettings to ArrayDataModel

    Hello

    I want to read several QSettings strings and then fill in an ArrayDataModel.

    So with this code, I've saved several channels in QSettings:

    void ApplicationUI::saveDataInQSettings(QList filepath) {    QSettings settings;
    settings.beginWriteArray("filepaths");
    for (int i = 0; i < filepath.size(); ++i) {
        settings.setArrayIndex(i);
        settings.setValue("filepath", filepath.at(i));
    }
    settings.endArray();
}

    Now, I want to recover the QSettings channels as follows. I have a C++ function that fills the QSettings strings in a QList:

    QList ApplicationUI::fillQSettingsInQList() {
    QList filepaths;

    QSettings settings;
    int size = settings.beginReadArray("filepaths");
    for (int i = 0; i < size; ++i) {
        settings.setArrayIndex(i);
        QString filepath;
        filepath = settings.value("filepath").toString();
        filepaths.append(filepath);
    }
    settings.endArray();
    return filepaths;
}

    In my main.qml, I have a NavigationPane containing a container in which the ArrayDataModel is displayed.

    I put the fillQSettingsInQList () - method in onCreationCompleted then I have the TI in QML when the application is open:

    [...]NavigationPane {
    id: navigationPane

    onCreationCompleted: {
        Qt.app = app;

        var filepaths = app.fillQSettingsInQList();
    }

    But how can I now fill this strings in the ArrayDataModel?

    Thanks for the replies. I have not used the track with a list of the QStrings. It is now much simpler.

    I saved the ArrayDataModel strings in the QSettings in this way. First of all, I saved the channels how I'll put in the QSettings and different channels:

    void ApplicationUI::saveDataModelInQSettings(bb::cascades::ArrayDataModel* model) {
    QSettings settings;
    settings.setValue("size", model->size());
    for (int i = 0; i < model->size(); i++) {
        QVariantMap map = model->value(i).toMap();
        settings.setValue("string_" + QString::number(i), map.value("string"));
    }
}

    And completely action to get the information back to the ArrayDataModel of the QSettings:

    void ApplicationUI::fillQSettingsInDataModel(bb::cascades::ArrayDataModel* model) {
    QSettings settings;
    int size = settings.value("size", 0).toInt();
    for (int i = 0; i < size; i++) {
        QString filepath = settings.value("string_" + QString::number(i), "String not found").toString();
        model->append(filepath);
    }
}

  • Find the exact match from the given string

    Hi friends,

    I have a string separated by commas parent ' asdf, 1234, Vanessa, rtu, 123'.

    If the string to find is "1234", the query should return 'Y' (as '1234' had an exact match).

    If the string to find is '12', the query should return "n" (for '12' has no exact match).

    If the string to find is "12345", the query should return "n" (since '12345' has no exact match).

    If the string to find '123', then the query must return 'Y' (from '123' has an exact match).

    If the string to find is "124", the query should return "n" (since "124" has no exact match).

    The string to find will not have a comma.

    I tried with INSTR, REGEXP, REPLACE logical BI-BOUTEILLE. It does not work. Please help me.

    Not sure exactly what you want or what are your intentions of PL/SQL, but it can help you!

    SQL > ed

    A written file afiedt.buf

    1 declare

    2 v_parent_str VARCHAR2 (200): ='asdf, 1234, Vanessa, rtu, 123';

    3 v_src_str1 VARCHAR2 (50): = '123';

    4 v_src_str2 VARCHAR2 (50): = '12';

    5 v_src_str3 VARCHAR2 (50): = '1234';

    6 v_src_str4 VARCHAR2 (50): = '12345'.

    7 - my varriables is declared.

    8 I PLS_INTEGER;

    9 str VARCHAR2 (100);

    tab 10 sys.dbms_utility.uncl_array;

    11 start

    12 str: = "" ' | " REPLACE (v_parent_str, ",", "",""). '"';

    13 sys.dbms_utility.comma_to_table (str, i, tab);

    14 d in 1.5 in loop

    15. If TRANSLATE (tab (j) "," has "', 'A') (v_src_str2, v_src_str3, v_src_str1, v_src_str4) then

    16 dbms_output.put_line (TRANSLATE (tab (j) "," has "', 'A') |') -exist");

    17 end if;

    18 end of loop;

    19 * end;

    20.

    1234 is

    123 exists

    PL/SQL procedure successfully completed.

    SQL >

    If you need something else, then please clearly describe the requirement.

  • First Max value to find and add the previous channel values

    Hello, I would like to be able to parse a string to find the first maxima (inflection point) and then add channel so that all the values are equal to the maximum

    the index where the maximum was found.

    To explain better, in the attachment, the original channel's Ych and the channel in the annex is Ych_appended.

    Any help would be appreciated.

    Thank you

    The feature you're looking for better using the SCRIPT of DIAdem.

    First of all, you can find the first maximum in a channel by using the ChnPeakFind function. The document below explains how to use this:

    http://digital.NI.com/public.nsf/allkb/DD069B95FB938C4286256FC8006A09CD?OpenDocument

    The channels that you specify in the function call will contain the value x and y of the first maxima. Then, you will just need to:

    1. Copy the original using ChnCopy channel.

    2. Find the index of the value to your channel original x axis at which the peak occurs.

    3. Browse the newly copied channels, replacing the inside with peak values until you reach the index of the value found in step 2.

    I hope this helps.

  • Find visa byte

    Hello:

    What is the way to start a loop based on a byte of spisific, which changes this byte and the same aprears of value in the data?

    The VI here, reads the byte stream, but I want to start reading the loop of the case, as soon as a value = 14 aprears. I need to synchronize the bytes and start the reading of the package of 25 bytes to the value of spisific.

    Imagine a code such as:

    If (Serial.avaliable () > 0) / / if the bytes are coming

    {

    int inByte [0] = Serial.read (); read the first byte

    {If ((inByte [0] == 14) & (boolian_Variable == ture)) / / If this byte is equal to 14 and the loop has not been started then read 24 bytes}

    {for (int i = 1; i)}<24;>

    {inByte [i] = Serial.read ())} Save 24 bytes in a table

    boolian_Variable = false; fix boolian false, in order to avoid the runing this loop again

    Serial.Print ("inByte [3]); series print the desirable value

    }

    }

    }

    My apologies to folks who would like to answer that I run labview 9 on my machine. I'll upgrade my system. :-)

    Thank you.
    KD.

    What I've done in the past is to read all the available data to the serial port.  I then use a search string to find the start character.  Then, I use split string to get the 24 bytes of the message.  Save the rest of the string into a shift register.  Repeat steps.  Add the newly read data for the old remaining data before performing the search again.

  • Find the text and apply the format paragraph tag in Framemaker 11

    Help!

    I am trying to automate the search text in a file FM11 and CE marking with a specific paragraph tag. Once it is, I want to be able to search for the same string again and delete it. The research will include wildcard characters. I'm moving Word files on and bring with manual numbering of paragraphs. Thus, when they arrive, they "2.3.4.5" before paragraphs for example. I want to search all of the numbers at the beginning of paragraphs, tag all those with the appropriate para format (starting a catalog) and then remove the manual numbering.

    At this time do us it manually, using find/replace and by using wildcard search strings to find (such as '\P[1-9]*.*.*.*[0-9]', which will find all the para numbering at the beginning of a paragraph 4-digit), then using the change option to paste to paste in a paragraph of the catalog tag. Then we repeat the same search and delete the text, leaving only the tag para to the number format. It works very well, but errors can occur if the search string in set incorrectly or if the numbers are not deleted (in this case, it is found on the next search and re-labeled incorrectly). For example

    I work for the Air Force collection of entries from the field and creating publications out of them, so there is no mobile profit here, just trying to be efficient. Any help is greatly appreciated!

    Thanks in advance

    b

    Hi Brian,.

    I guess right here because I've never done this before, but... In my view, there is definitely something wrong with your mission to find the property values. The way you wrote, you are trying to assign two properties to a single table space. That's why you need to remove these two lines to make him find work, because they are replacing the FindText property apparently. Here is my proposal for how it should be:

    findParams = AllocatePropVals (2);

    findParams [0].propIdent.num = Constants.FS_FindText;

    findParams [0].propVal.valType = Constants.FT_String;

    findParams [0].propVal.sval = searchString.

    findParams [1].propIdent.num = Constants.FS_FindCustomizationFlags;

    findParams [1].propVal.valType = Constants.FT_Integer;

    findParams [1].propVal.ival = Constants.FF_FIND_USE_WILDCARDS;

    In any case, let me point out again once it is a hypothesis and I did not test this. I am sure, however, that the solution is somewhere along this path.

    Russ

  • Find the last characters with grep

    I'm lousy with grep and didn't find the solution with google, we will so ask here (help me, please...)

    I need to find the last 7 characters in a paragraph and assign a character style "not break". I know that all the rest, but what is the string to find the last 7 characters (white space included, numbers and letters).

    Thanks in advance.

    try searching. {7} $

  • change the string to the variable (sort of)

    Hello. I'm a flash game which requires a lot of similar, such as functions

    function getSomeNumber (): number {}
    return number;
    }

    I was wondering if I could generalize this by following these steps. take a string parameter that defines the name of the variable. Then, I want to change this string for the name of the variable so that I can the value of the output variable. kinda like that

    function getSomeNumber(nameOfVar:String):Number {}
    somehow use string to find variable name and returns the value of the variable
    unknown return;
    }

    hope it makes sense.

    trigger2160

    Code of clbeech is what I was looking 4. Not sure y I need all this that extra code kglad but thanks for the help anyway.

  • Replace the string in BPEL

    Hey all,.

    I need to replace the & with a + since the & just breaks the bpel process. Any ideas on how to make a replacement string to find all the the & and replace it with the +, I looked in the transformation and the entitlement activity, but did not find all the functions to help me with this.

    Any help would be appreciated.

    Thank you

    You can create an XSL template for string replacements, see the link given below:
    http://geekswithblogs.NET/Erik/archive/2008/04/01/120915.aspx

    If you are familiar with Java you can add a Java embedding activity and string replacement using the method of the replacement of the java.lang.String class.

    Diakité
    http://SOA-HOWTO.blogspot.com

  • read the cluster of the specification of the file LVM

    Does anyone have a clever solution to read programmatically masks specification limit (for waveform limit testing) of a file LVM?

    I used the Express VI 'Mask and limit review' to create masks, which I saved as LVM using the function of recording data.

    I don't want to use the Express VI to itself test, because the test is in a Subvi is called in a loop; each iteration of the loop must send different masks at the limit of Test.vi which is in my sub - VI.

    Thank you

    -one

    Hi Andy,.

    LVM is a text file for reading using the function of reading files.

    After that, I search the string to find where the data starts using the match pattern

    You then process the rest of the string to the file, and then use spreadsheet string in array with a tab as the delimiter.

    There are tabs at the beginning of each line and extra line break at the end so I used subset of the table in order to avoid these areas. It may not work every time, but you can fix that when you encounter a problem.

    see you soon

    David

  • How to get the text related to typedef diagram/comments?

    Greetings,

    Someone has an idea diagram-text editable via a typedef - so that the the typedef update changes the visible text by programmers?

    I tried to use a string with a value of text by default, but it does work well for me.  With string-typedef, at best, constant text appears first in the constant diagram but text does not update with the changes of the typedef.  At worst, no text appears in the constant on the diagram.

    LV 2009

    Thank you/Bravo!

    You can do with scripts.  This snippet of code can be run from the Tools menu and it will update the first constant string it finds with the default value of its Type def it can easily be changed to update all Type Defs constant string.

  • Cannot delete the HP Photosmart C3180 and port DOT4USB drivers

    I deleted the icon of the printer and the bestI software possible.  but I still have the DOT4USB port, but no printer icon. Ineed to remove the portand drivers. I have now an a909g hp 8500, and the new tests diagnostic shows the HP Photosmart C3180 as one of the printers on a USB port. This is not true.

    I'm a software developer, and computer repair guy and I took a class years on writing ActiveX/OLE controls, so I don't mind editing the registry and delete the files.  I need steps for pub to remove the vestigesof the c3180.  This software is a pain in the neck. easiest way to uninstallis to reinstall windows from scratch, I know, but I have a lot of valuable files.

    I don't want to miss all the pieces. the drivers are not my skills more.

    I got it by using a regedit file that looked like below.

    someone else will be different because the material of the port will be different, so you should not use this exact one.

    I suggest you rather that do [windows [logo-key indicator] r regedit [Enter]

    Search for the following text (not nessarily just a string):

    Find "HP Photosmart C31" partial text and delete the entries that you find

    Search text "DOT4USB" and delete the entries you find, but make sure that you do not delete the keys to category of port

    You can search "DOT4" and carefully remove the subentries that apply only to the C3100 series.  You probably already have these above.

    reset.  You must, because these drivers are still loaded and these inscriptions will be back unless you restart now that you have deleted entries.

    You can alsodocument them to change, copy the name of the key, then paste into notepad ++ and save it as a .reg with Windows Registry Editor Version 5.00 header file

    each key listed must be separated by ablank line and begin by [- and ends by]

    -hp3100remove.reg-

    Windows Registry Editor Version 5.00

    [- HKEY_CURRENT_USER\Software\Hewlett - Packard\DEMFileData\HP Photosmart C3100 series]

    [- HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett - Packard\HPDJ Printing System Config\HP Photosmart C3100 series]

    [- HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett - Packard\HPZ\Glue\HP Photosmart C3100 series]

    [- HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett - Packard\HPZ\Glue\HP Photosmart C4100 series]

    [- HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett - Packard\HPZ\Glue\HP Photosmart C5100 series]

    [- HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett - Packard\HPZ\Glue\HP Photosmart C6100 series]

    [- HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett - Packard\HPZ\Glue\HP Photosmart C7100 series]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {36FC9E60-C465-11CF-8056-444553540000} \0015]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {48721B56-6795-11D2-B1A8-0080C72E74A2} \0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {48721B56-6795-11D2-B1A8-0080C72E74A2} \0000\Functions\PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {49CE6AC8-6F86-11D2-B1E5-0080C72E74A2} \0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {49CE6AC8-6F86-11D2-B1E5-0080C72E74A2} \0001]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0000\DeviceData]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\DeviceClasses\ {28d78fad-5a12-11d1-ae5b-0000f803a8c2}]

    [-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\DeviceClasses\{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\##?#DOT4#Vid_03f0&Pid_5611&MI_02&DOT4&PRINT_HPZ#9&298a8a4c&0&0#{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\#\Device Parameters]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Nls\MUILanguages\RCV2\dot4usb.sys]

    [- Series of Photosmart C3100 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-3\HP]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\DOT4PRT\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4]

    [-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1\Device Parameters\Functions\PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\DOT4\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\DOT4\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ\9 & 298a8a4c & 0 & 0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\DOT4\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ\9 & 320ed38 & 0 & 0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USBSTOR\Disk&Ven_HP&Prod_Photosmart_C3180&Rev_1.00\8&1932c8&0&CN6ABC413004KV&0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USBSTOR\Disk&Ven_HP&Prod_Photosmart_C3180&Rev_1.00\8&e567de1&0&CN6ABC413004KV&0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\Vid_03f0 & Pid_5611 & MI_00\7 & 1ade038 & 2 & 0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\Vid_03f0 & Pid_5611 & MI_02\7 & 1ade038 & 2 & 0002]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Hardware Profiles\0001\System\CurrentControlSet\Control\Print\Printers\HP Photosmart C3100 series]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Hardware Profiles\Current\System\CurrentControlSet\Control\Print\Printers\HP Photosmart C3100 series]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {36FC9E60-C465-11CF-8056-444553540000} \0015]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {48721B56-6795-11D2-B1A8-0080C72E74A2} \0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {48721B56-6795-11D2-B1A8-0080C72E74A2} \0000\Functions\PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {49CE6AC8-6F86-11D2-B1E5-0080C72E74A2} \0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0000\DeviceData]

    [-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\DeviceClasses\{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\##?#DOT4#Vid_03f0&Pid_5611&MI_02&DOT4&PRINT_HPZ#9&298a8a4c&0&0#{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\#\Device Parameters]

    [- Series of Photosmart C3100 HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Print\Environments\Windows NT x86\Drivers\Version-3\HP]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\DOT4\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ\9 & 298a8a4c & 0 & 0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\DOT4\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ\9 & 320ed38 & 0 & 0]

    [-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1\Device Parameters\Functions\PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\Vid_03f0 & Pid_5611 & MI_00\7 & 1ade038 & 2 & 0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\Vid_03f0 & Pid_5611 & MI_00\7 & 1ade038 & 2 & 0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB\Vid_03f0 & Pid_5611 & MI_02\7 & 1ade038 & 2 & 0002]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USBSTOR\Disk&Ven_HP&Prod_Photosmart_C3180&Rev_1.00\8&1932c8&0&CN6ABC413004KV&0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USBSTOR\Disk&Ven_HP&Prod_Photosmart_C3180&Rev_1.00\8&e567de1&0&CN6ABC413004KV&0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Hardware Profiles\0001\System\CurrentControlSet\Control\Print\Printers\HP Photosmart C3100 series]

    [- \0015 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {36FC9E60-C465-11CF-8056-444553540000}]

    [- \0000 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {48721B56-6795-11D2-B1A8-0080C72E74A2}]

    [- \0000\Functions\PRINT_HPZ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {48721B56-6795-11D2-B1A8-0080C72E74A2}]

    [- \0000 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {49CE6AC8-6F86-11D2-B1E5-0080C72E74A2}]

    [- \0000 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}]

    [- \0000 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}]

    [- \0000\DeviceData HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}]

    [- \0000\DeviceData HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}]

    [-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses\{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\##?#DOT4#Vid_03f0&Pid_5611&MI_02&DOT4&PRINT_HPZ#9&298a8a4c&0&0#{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\#\Device Parameters]

    [-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses\{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\##?#DOT4#Vid_03f0&Pid_5611&MI_02&DOT4&PRINT_HPZ#9&298a8a4c&0&0#{28d78fad-5a12-11d1-ae5b-0000f803a8c2}\#\Device Parameters]

    [- Series of Photosmart C3100 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3\HP]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DOT4\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ\9 & 298a8a4c & 0 & 0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DOT4\Vid_03f0 & Pid_5611 & MI_02 & DOT4 & PRINT_HPZ\9 & 320ed38 & 0 & 0]

    [-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1\Device Parameters\Functions\PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1\Device Parameters\Functions\PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DOT4USB\Vid_03f0 & Pid_5611 & MI_02 & DOT4\8 & 39e652e5 & 0 & 1\Device Parameters\Functions\PRINT_HPZ]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\Vid_03f0 & Pid_5611 & MI_00\7 & 1ade038 & 2 & 0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\Vid_03f0 & Pid_5611 & MI_00\7 & 1ade038 & 2 & 0000]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\Vid_03f0 & Pid_5611 & MI_02\7 & 1ade038 & 2 & 0002]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR\Disk&Ven_HP&Prod_Photosmart_C3180&Rev_1.00\8&1932c8&0&CN6ABC413004KV&0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR\Disk&Ven_HP&Prod_Photosmart_C3180&Rev_1.00\8&e567de1&0&CN6ABC413004KV&0]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Control\Print\Printers\HP Photosmart C3100 series]

    [- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Control\Print\Printers\HP Photosmart C3100 series]

  • Empty text box value when reading about the LV2012 development system but no Production

    Development platform: 32-bit Windows 7, LV2012 Professional Development System.

    Production of platforms: Windows XP.

    We have a test application, we have developed (in haste, I might add) who has a curious problem.  As part of the installation for each test, read us a text box with a serial number entry and record them in the log files.  Series enough.

    This works very well on production machines - no apparent problem.

    However, on the development computer, when I try to read the text box, all I get is an empty string.  I tried to read directly from the Terminal, as well as using a property value box.  Each time, there is nothing in the string.  This is even though I'm looking at the text box and there are visible data in it.

    Clear the text box repeatedly, I'm looking to see if any of those that occur at the wrong time.  And, indeed, I am looking a probe value of ' ' from the property node Value with the string "1234" visible in the text box while NONE of the compensation functions have been affected.

    The test application uses a pretty standard user interface event loop model, with an event loop manages the user input and the other event loop manages the business logic.

    Anyone have any idea what can cause this, or a better search string to find clues?

    Thank you

    Geoff

    As promised, I did go to the bottom of it.

    Simply enable "update of value while typing" gave me the result I expected.

    To explain: I had a key event down to the first text box that has been copied to this text box.  Whenever a key was hit in this text box, the value would be read and updated.  I did not have all the events for the new text box.  It has not been updated to what some other events.  At that time, it was apparently too late (most of the time on the development computer) and occasionally on the Production machine.

    Activation of the "Update value while typing" indicator means that the value field would properly up-to-date each time he has been seen/accessible.

    Life is a learning experience...

  • Problem of time in seconds

    OK, here's the thing: I use get current date/time, I convert it to a string and the string is saved in a CSV - text -.

    Then, I built in a feature to plot the data previously saved on a XY Chart. I use the search string to find the values of time and convert to a timestamp.

    Works like a charm... BUT I noticed when I moved with my VI to another platform for some reason, it has a different formatting of the time system, this is the case:

    My 64 bit:
    08:16:48.978 PM 02/08/2010

    Any other 32-bit windows:
    08:25:02, 055 02/08/2010

    Another problem is that it uses a comma instead of a period for fractions of a second.

    So now, here is the million dollar question: where can I change this, preferably in labview? I want to get the time in AM PM regardless of the platform and use the point for fractions of a second.

    Thank you!

    '

    This is a possibility, as you use the ' Date/Time Format string"you can use the same format string to parse the timestamp:

    The fact that a "," is used is a bug in LabVIEW and still not fixed. Where should you get fractions of a second? The timestamp data itself always have lots of information about the timestamp. Representation (whether as indicator of string or timestamp) can be made in any way (same time zone independent).

    Tone

    PS Geinig om nederlands comments you zien

Maybe you are looking for

  • Firefox Sync synchronize after reinstalling windows.

    Afret reinstall I loged in Firefox sync and started to wait for the synchronization. Nothing happened. I tried once or twice, restart firefox, and sync still doesn't work. I decided to reinstall firefox with removing profile folder. After that, I log

  • "Never remember history" allows to always "recently closed tabs".

    I use permanent private browsing (i.e., selected "history never remember ' with 'always use private browsing mode' selected (and"accept cookies")), and still under 'History' tab 'Recently closed tabs' is always a viable option that shows where I've b

  • Satellite L850. Indicator Toshiba wireless is not compatible with Win8

    I just bought the L850 with windows 7 installed.I tried to install subsidized upgrade Windows 8 PRO online. To install remove Toshiba wireless indicator since it is apparently not compatible.Not that I lose the internet connection in my office.Toshib

  • Time Machine hooked up / slow down

    I use a clean install of the OS X 10.11.2 leave a USB boot. Not an upgrade from an earlier version. I had used a NAS for the TM backup without incident so far. Since the machine is new, I started a complete backup of the TM. I noticed it seems to be

  • Lenovo y70-70 how do I enter the BIOS

    Is there a key conbination? There is no button as y50-70.