< STRONG > after recording when do we get update

Similar Questions

• I started to get a red message box when trying to get updates... "windows cannot find updates" error 80070490

  I started receivine a red message box when trying to get updates... "windows cannot find updates" error 80070490.  I tried this fix only displayed in this field of the error help and have downloaded the fix - it Center, and he is unable to perform the task.  Please let know us what I can do.  Thank you

  Hello

  Please see the following Microsoft KB article:

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates:

  http://support.Microsoft.com/kb/958044

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps.

• When trying to get updates, I get error code 80072efd. I tried to disable the antivirus, also was in contact with Mcafee one they have suggested that I have contacted Microsoft

  I ' am using Windows Vista Home Premium, Antivirus Mcafee, also have spyware detector. I tried turning off their all and then run windows update to no availe, get the same error code 80072efd

  Hello

  You may encounter temporary connection related errors when you use Windows Update or
  Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  More details here:

  Try this, as it's the same for SP1 and SP2
  http://www.walkernews.NET/2009/05/14/how-to-fix-Windows-Update-error-80072efd-in-Vista-SP1/

  and here:

  http://trevinchow.com/blog/2006/08/09/Windows-Update-and-Error-0x80072EFD/
  And here

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error code 80070005 when trying to get updates

  I get an error code 80070005 whenever I click on check for updates using Windows Vista. What can I do to fix this? My office has not updated since October 2009, even though I have it set to check every week.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer

  TaurArian [MVP] 2005-2010 - Update Services

• RAZR: When Americans RAZRs get updated?

  Hi all

  Although I see their updated over the past two days to the VZW recived

  I was wondeering if non - US versions will receive the 2.3.6 update or we remain on the current version

  There are a number of things that I was hoping would be set on the razr (signal and other problems) not to mention CH razr curently in 2.3.7 would be so good to see some changed/upgrades made to our units

  now before toward me page updates yes I looked but this list is pretty OLD it does not even contain your leetalone current phones, phones motorcycle has published over the past months, so not much of interest to look at something that has not been updated in 6 months.

  concerning

  Kristian

  
  

• Windows 7 - error when trying to get updates

  Cannot update Windows 7. Message: ' Windows update cannot currently check for updates because the service is not running. " You may have to restart your computer. "Restarted several times but the message keeps popping up. Help, please!

  Click Start, type: Services

  Press enter on your keyboard

  Scroll to Windows Update

  Right-click Windows Update

  Click on properties

  Select the tab "General".

  In the drop-down list click Startup type

  Select Automatic

  Then click Start Service

  Click on apply and OK

  Restart the system and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  Hello

  Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  Let us know if this helps!

• I get a notification to update when you sign in to firefox. When you try to update you get the message "connection to Server", which can go about 4 hours and never update

  I get a notification to update when you connect to firefox on my mac. When you try to update, I get a message "connect to Server" which can go over 4 hours and never update. It is most annoying. How can I remove that annoying popup which does not in any case all in ensuring that I have updated to the latest version?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• When I try to update windows I get this error «Windows Update error 80072efe»

  Hello

  I installed 2 days ago to my new PC windows 7. After the installation is complete, I tried to update windows for the first time and every time I get this error: «Windows Update error 80072efe» I google the error and I saw that a lot of people have the same problem. Most of them had their infected PC but mine is brand new and I don't know what to do.

  Hello
   
   
  I found some articles that should help you solve thi sissue.
  Try the methods listed in the articles below and check.
  
  1 Windows Update error 80072efe or 80072f76
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76
  
  2. you may experience temporary errors related to connection when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I get updates I get them anything but an error shows a 8024402C

  I was able to get updated and deleted the firewall then I have them all except one above and he says: I need help from my provider to fix this

  http://support.Microsoft.com/kb/900936

  "0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites"

  To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve this issue, proceed to method 2.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT key on the keyboard to display the menu.

  3. On the connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     Collapse this includes this image

     

     and then type cmd in the box start the search .

  7. In the list of research results, right click on Cmd.exe, and then click run as administrator.
     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
  Back to top

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. In the connections tab, click LAN settings.
  4. Click to select the check box automatically detect settings , and then click OK.
  5. Try to install updates again.

  See you soon.

  Mick Murphy - Microsoft partner

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• When you try to update windows, I get error Msg. Web site has encountered a problem and cannot display the page you are trying to view. Error # OXC800042D do - what do I do now?

  I am running Windows XP Pro 32 bit.  I get a planned update early in the morning, but after reading an article in update of virus, I thought I would check out the updates, which I didn't.  Above, is what happened when I tried to check it ME late.  Help & information will be appreciated & is all I really need to worry?

  Hello

  . Have you done any recently changed on the computer before this problem?

  You can see the steps listed in the article below and check if you are able to run the Windows updates successfully.

   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update:

  http://support.Microsoft.com/kb/836941

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  I hope this helps.

• When I try to update programs on my computer, I get a message saying a program in windows install can not start what I do?

  When I try to update or install new programs, I get a message saying that a program in windows install icannot open or does not work and I can't complete installation. I am running windows xp with all service packs and updates.

  Hello

  You did changes to the computer before this problem?

  Always after return the exact error message. This could help us help you better.

  Read the following article that may help you.

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• I always get the error massage 0 x 80070424 when I try to update my computer.

  I can't open any file and when I try to update my computer, I just get a massage of the error which is 0 x 80070424, what can I do to fix'it?

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.

  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>

  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  07/23 / 1107:56:32