Stuck record button
OK, it happened once more. On a shoot reality and the record button will not work... nothing. And I can't even disable the camea. The only way is to pull the battery. But then when I turned on the camera again media "recreate" lights up. Second time this has happened. The problem is when your in the milldoe of a scene and it happens, live it to the top of the scene for a while. WTF!
Tags: Large Sensor Cameras
Similar Questions
-
Toshiba Camileo x 400 record button does not work!
Hi there guys!
I recently bought the camera Toshiba Camileo x 400, unboxed it, took the lens, screen cover and the insulating battery then cap it charged. After that she had loaded it, I inserted the SD (16 GB SanDisk 'Ultra' 30 Mbps) and went to shoot some test videos.
Aaaaand disappointment.The record button (mentioned in the manual as the "video" button) does nothing. I tried pressing it hard, I tried pressing down lightly and... Well, there is not that much more, that you can try. Anyway, I went back and looked through the manual, but it doesn't really have a very good troubleshooting section.
After a few minutes, I thought I'd give the remote a whirl - and guess what?
The record button on the remote control worked! The pause button of the camera works too, but for the record, I have to use the remote control. So, what's the problem?Should I take it back and replace it?
Just to clarify, the camera was on the default settings.Thank you for the answers!
-Joe Adams, "Jeo.
______________________________
(the nickname came after one on another forum spelling mistake)Hello
In my opinion, you should visit your dealer and should try another new.
The record button should work fine, and I think it could be a mechanical problem because the buttons on the remote are working properly. -
I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?
Try to enlarge the GarageBand window by dragging the corners of resizing.
If she looks like this, your window is small:
You can also try to click the double arrow at the end of the toolbar to reveal more options.
-
My new records button has stopped working. How can I fix it? Win 7
I run Windows 7 and my new records button has stopped working. How can I solve this problem
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
Video record button blackBerry Smartphones does not work
Version cours.148 and I saw this exact problem posted anywhere else. When I go to the media, the video and click on the record button that I need to return to the screen of choice of media and I can't seem to start recording. I tried all the usual things. Does anyone else have this problem?
Thank you
Gary
Solution - really open up the Video Camera to the video camera icon and record from there. It worked.
-
I created a pdf with blocks of text to fill out form. Is it possible to add a record button instead of having someone go to produce and record?
You can add a save button slot for your file, but not a button Save.
-
When I select edit then preference, the window is too large to be able to see the record button at the bottom to save my changes in the preferences. How do I make the window smaller so I can't save my changes?
Your system meets the requirements of System. Dreamweaver?
The problem can also be caused by the settings of your system as in
-
Cannot click on the record button in premiere Pro
Hello
I want to create voice-over in adobe pro cc first.
The only thing is that I can not click on the button R ('record' button) when I chose my microphone.
The microphone works on my mac and showing in the first. But nothing happens when I click on the record button.
I'm using a Samson q2u usb microphone. Can someone help me?
Thank you
.. .thank you! That was exactly the problem that has been plaguing me.
With the help of CC first edition, the solution was:
- Select the sequence-> add titles
- Add a new audio track - select the Mono type
Everything works fine then.
-
iMac G3 stuck power button / stop
So, I bought a G3 iMac on eBay. It's a PowerMac 2.2 If you need this information. A few months later, the power button is stuck in. So I have to keep hitting the power button to get it to turn on. And if I shake the computer, you can turn off. All solutions on how to get this button to be able to take off. The computer was probably not the best handle I see a few pieces chipped through the case and the door for the RAM has tape on it since there is nothing to hold the bottom.
The initially supplied with your iMac keyboard has a power button. If you use this keyboard, can you use this button to power instead?
-
How to add a record button on the front panel to save waveform data
Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.). I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)). I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.
I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.
-
Hello! I'm new in LabVIEW and I'm trying to implement a Microsoft graph chart that read the intensity depending on the time. I need to use a button to record (duration and intensity) data while the key I need to backup the data. I found a few examples, but I can't grow properly. I develop the program in the 5.1 version of LabVIEW.
I'd appreciate any suggestions. Sincerely, Julieta.Well, have you tried the suggestions in the error message? I would first try the last suggestion. You didn't post any code it is therefore impossible to say how you have configured the DAQ Assistant. If you have configured for continuous acquisition, the time it takes to save the data is at the origin of the samples should be replaced. A fixed number of samples should work or you can use a producer/consumer architecture. Look at design patterns (file > new...) for an example.
-
I opened a document that I had already called and saved. Instead of creating a new document for my second project because the provision would be the same as the current paper I just saved, I just typed on the page layout, and when I finished I hit the Save button instead of Save as. Is there a way I can recover my previous document?
Hello Renee,.
I suggest look at this FAQ on recent versions of the recovery files:It really depends on whether or not a previous version was recorded, but it can't hurt to check. -
Cannot record - stops after clicking on the record button
Hello world
In short, I can't save in Captivate. Here's a breakdown of the fast workflow:
1. open Captivate
2. create the new project
3. Select the size of the window of the application/custom
4. click on 'Save' button on the top left of the application window
Once this is done, the recording box disappears, and Captivate disappears (always running in the background). From there, I can open Captivate in my Start menu, but it opens another request, not the original. The only way to close it is by putting an end to the task.
Any ideas? I've recently updated to the latest patch and can't remember experienced this before.
Thank you!
Hi again
You might try to demolish the settings file.
Close Captivate
Open Windows Explorer
Navigate to the following location:
?:\ Documents and Settings\? \Application Data\Adobe\Adobe captivate
? = The drive letter
?? = Your logged in user name
Delete the captivate_v40.dat file, you should see (or rename it if you are hinky on deleting files)
Restart of Captivate
Note that this operation may require you to adjust the Windows Explorer, so it allows you to view these files. In general, you click Tools > Folder Options > view tab and ensure hide them extensions of known file types and Hide protected operating system files options are not enabled.
Once you have completed these steps and restarted Captivate, it should point out that the file is missing and cook until a new on-the-fly.
I hope you do once Captivate starts to behave normally again. (I just wish I could do that easily with people and animals, I know and love!)
See you soon... Rick
Useful and practical links
Captivate wish form/Bug report form
-
SO, I want to do something like:
at the push of a button to a page of oracle apex, it increments a value in a table of some. I want to record how many times the particular button has been pushed. Is it possible to do such thing, by the use of a query, or how?When the button is pressed, it must send the page and not to redirect the page. Then, you create a page process that is subordinate to the press of this button. The process would be something like
Update clicks
redirect = redirect + 1 value
where button_name = "Page 1 Submit button"; -
Mini IPad 2 retina :(STUCK Home button
Any ideas on how to dislodge the button under the home screen? I really don't want to pay $50 +, but if it comes to that then Yes... I tried pushing down as hard as possible and dragging it but it is completely pressed and nothing helped. Super Glue a piece of something in the home button and drag?
EDIT: FIXED *.
Maybe you are looking for
-
QuestionMy drop down bookmark does not offer 'manage bookmarks '. All the support I can find that this is how to change the bookmarks. How can I find the link manage if this isn't in the drop-down list?
-
Does not have the search bar in the top right of the screen (part of the navigation bar)
-
Re: Satellite Pro A200/PSAE7E - HD DVD not recognized
I've demoted Biz from Vista to XP Pro. Everything works great, EXCEPT...the DVD/RW works well as a cd / dvd drive (writing not tested), but it will recognize all the data on the disc when an HD DVD is inserted, so not HD-DVD movies.
-
I bought and HP DV6-6195 ca last year. I took it because of the good video card, mat, HD screen and fingerprint reader. I have been using windows 7, but at the University, they gave us Windows 8 free through MSDNAA subscription. I've been going to su
-
Hiya, I got a ring of guy saying it was Ant support for Microsoft that my software warranty had expired and that my computer was in danger of break up at any time from last week. computer is not even a year and I haven't finished to pay off so its un