Stuck with ACS SE 4.1

Similar Questions

• Does not touch the iPhone 6 after 18 months of use.  Apple Service Center is not able to solve the problem it could material being associated and returned the phone, now I'm stuck with this expensive junk, the Iphone above 6 serious problem?

  I am in India, I was using Iphone 6, 16GB, for the last 18 months, bought in Australia, progressively, the touch screen not responding. Then the problem started to happen frequently. I said, all ideas update, (9.3.2) reset, restore, etc., etc., nothing helped, finally the Apple so-called service center has confirmed that it is a hardware problem, is not repairable and advised me to return the phone and scrap it or to pay nearly 60% of the phone cost to get another phone as replacement. (It might be a refurbished phone).  As I see a lot of complaints in the blogs on the problems of the iphone 6, Apple has not taken any measure to solve my problem and trying to make more money on behalf of replacement... Now I'm stuck with such a pricey gadget... should I buy new Iphone?

  Sorry, but an iPhone can be repaired by Apple or a Service provider authorized Apple in the country of purchase. If you think of buying a new device, buy it in the country where you will use it will save you a lot of trouble if you need service.

  And, according to usage, a 16 GB model might not have enough free space left to work properly, which can also cause the phone to lag and unresponsive at times.

• My iphone is stuck with the itunes logo

  my iphone is stuck with the itunes logo. How can I unlock it? »

  Your phone needs to be restored. Take a look at the instructions here.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• How can I permanently disable obsolete warnings because I'm stuck with the old machine, I

  I'm stuck with OS 10.4 and can't update Firefox or plug-ins all further. Get - again and again! -caveat by Firefox. How can I disable those permanently?

  This is how you do it.

• I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for comparability and opening the homepage whenever I starts the browser.

  Windows 7 64 bit
  I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for compatibility and opening the homepage whenever I starts the browser. I keep having to go back to version 9 to solve this problem.

  Sorry to be a while back! It tried unsuccessfully so this AM, gritted my teeth and deleted the FF programs folder and downloaded and installed FF 10.01. He was still struggling with the same problem. Went in the appdata folder and two files sessionstore.js there. Delete both, restarted the browser and no verification of the compatibility of the modules was done at first upward and the additional tab for welcome to FF was the opening is no longer all seems to work as it should and I did not lose any of my settings... Thanks for trying to help, and I hope that my solution helps someone else who could this experience in the future. Hoping that the next update will smoother!

• When you surf, the URL does not change to reflect the page I'm. Also, if I have two consecutive sites, he is stuck with the first favicon and don't change either.

  Let's say I'm surfing a Web site. Any Web site. I type domain.com and start riding on the inside pages. "Domain.com" in the URL bar does not change.

  Also, if I visit two sites in a row and both have some favicons, I'll be stuck with the favorite of the first icon.

  They seem to be indications that the file that contains the details of the bookmarks and history is locked or damaged. This link should help - http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

• The Windows Setup program does not open. Stuck with black screen.

  Hi all

  I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."

  I have reset the NVRAM (command + alt + p + r) which did nothing.

  I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.

  The forum has a lot of "black screen problems" but none of their solutions worked for me.

  Any help would be greatly appreciated!

  Thank you

  1. leave BCA creates the installer from USB, but not to partition your drive.

  2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.

  3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.

• Re: L635 - 10 p - stuck with the blue screen and system repair

  I'm stuck with black repair screen of windows startup with the able to move mouse cursor. The normal windows startup ends with a blue screen:
  "unmountable boot volume".

  Unfortunately, there is no recovery disk. hope someone can help me here,

  1. how to operate again?

  2. How can I get the files in the desktop?

  Jin

  > I'm stuck with black repair screen of windows startup with the able to move mouse cursor.
  > Normal windows startup ends with a blue screen:
  > "unmountable boot volume".

  How did you start problem start? I mean if you have installed any driver or application or smth like that... In your place, I would like to reinstall Os than to try to fix it.

  > How can I get the files in the desktop?

  If you have important files smth on your hard drive, you can use Windows live cd to move them to a usb drive.
  By the way, have you tried to enter safe mode?

• S30 stuck with the code "36".

  Hello

  I've got a S30 (0568) that no longer starts. It starts, presents some codes when displaying the motherboard and stops with code 36 on this view, no output on the monitor and fans running at high speeds.

  I couldn't find information about start to date codes. Any suggestions for what I could try to fix this?

  I've tried the CMOS clear jumper, without success (the system is stuck with code 36 for two jumper positions).

  Thank you!

  Koen

  Last Monday, I opened a ticket, and Wednesday, IBM replaced the motherboard. It seems now run fine (and it also fixed my other problem).

  I would be always interested in these codes, however!

  Koen

• I'm stuck with several GB of music files on my phone and I can't get down them!

  The other day I tried to install an application on my phone, but I didn't have enough memory.  My phone is full of music via iTunes synchronisation dock. So I connected it to my computer to try to make some more room. But there is a problem.

  (1) Apple does not play nice with Palm. Synchronization is no longer permissible or possible. I can't use iTunes to manage/delete music.

  (2) in USB Mode, there is no way to access/view the library. It's just not there.

  I tried Palm support, and they confirmed that the USB Mode is not working. I guess that the library is located in a hidden folder or directory. They suggested that I downgrade my iTunes. Goal that is unacceptable to me because one) it forces me to break the license Apple, b) it is not taken in charge, and c) if there is still a remote chance it will mess up my iTunes library, I won't.

  I'm ready to get off at Palm headquarters and throw my phone to their building.

  Can someone tell me how to delete my library without hacking iTunes?

  I thought about it. Support, put this in your KB. Everyone who was sync via iTunes on a Mac is currently STUCK with several GB of music on their phone that they cannot manage or remove, which makes the Palm Pre a lot less useful than announced.

  USB mode is a waste of time for people on a Mac. These hidden files are never going to be visible, and the library cannot be removed. The solution: go through a PC. Anywhere, any PC will do. Connect your phone to the PC, go to the USB drive Mode and show hidden files, then delete them from there.

  I got an old laptop lying around at the bottom, and the problem was solved lickety split.

• Windows Vista stuck with "update configuration".

  Whenever I stop Windows Vista, System stucks with "Configuring updates" appearing on the screen.

  The original post has been read.

  The original post has no importance now.

  What you do not understand, is that you now do a logoff and reboot for a fresh start of windows.

  The problem should be gone because the download folder has been emptied.

  and if the problem is still there, start the system in safe mode and then rinse the folder download again.

• Windows Update stuck with 'Check updates'

  Separated from this thread.

  I have also the same problem rmahmud28 is seen except mine is Windows 7. He is stuck with 'Check updates' and I've already updated the Windows Update Agent. I tried some other stuff, like your FixIt tools, but nothing.

  No idea why or how... the problem was solved by itself. Looks like I have left no system check all these 300 updates available for download.

  Thanks anyway

• WLC 4402 impossible to authenticate correctly with ACS 5.2

  For some reason, I can't WLC to authenticate correctly with ACS 5.2. It's very strange in the sense that when I checked the log. ACS authenticates and authorizes the WLC 4402, but I can't log on the WLC. login screen appears, if I typed the username that he jumped

  Controller of >

  user:

  password:

  No matter what I typed (internal or external users), nothing seems to work.

  It comes to my frustration, I have no problem with authentication of routers and switches except WLC 4402.

  Hello

  Please delete privilege on the ACS level settings.

  Elements of strategy > authorization and permissions > peripheral Administration > Shell profiles > common tasks

  By default the privilege - do not use.

  Maximum privilege - not in use

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages

• Permission of AAA with ACS Shell-games

  Hi all

  I use a router cisco 871 running that version 12.4 (11) T advanced IP Services.

  I have difficulty getting permission to AAA to work properly with ACS.

  I am able to configure ACS fine users and assign them shell and private level 7.

  I then install a set of Shell Auth and enter the issuance of orders and configure.

  When I log in as a user, I get an exec with a level of 7 priv no problem, but I never seem to be able to

  to access global configuration mode by typing in conf (or set up) terminal or t.

  If I type con? It is the only command connect, configure is never an option...

  The only way I can get this to work is by entering the command:

  privilege exec level 7 Configure terminal

  I thought the whole purpose of the ACS Shell Set to provide this information to the router?

  It's frustrating

  The ACS server is set up with the Shell Set named Level_7 order authorization

  It is attributed to the relevant groups and I have the 'Unmatched orders' option selected in the 'license '.

  The "unmatched Args allowed" is also selected.

  See an extract of my IOS config below:

  AAA new-model

  !

  !

  AAA group Ganymede Server + ACS

  Server 10.90.0.11

  !

  AAA authentication login default group local ACS

  AAA authorization exec default group ACS

  AAA authorization commands 7 by default local ACS group

  !

  Cisco radius-server host 10.90.0.11 keys

  !

  !

  privilege exec level 7 Configure terminal

  privilege exec level 7 set up

  privilege exec level 7 show running-config

  privileges exec level 7 show

  !

  Hope you can help me with this one...

  PS I tried with orders of privilege on the router and remove the router and just keep getting the same results!

  Hello

  So now,

  You're actually using two different options and trying to couple then together. What I would say is you either use authorization Command Shell function or play with level privileges. Not mixed together both.

  Above scenario might work, if you move orders to focus on level 6 and give the 7 user privilege level. He couldn't be sure. Try it and share the results.

  That's what I suggest that orders back to a normal level.

  Provided below are the steps to set up the shell command authorization:

  -------------------------------------------

  Follow these steps on the router:

  -------------------------------------------

  ! - is the desired username

  ! - is the password

  ! create - us a local user name and password

  ! - in case we are not able to get authenticated via

  ! - our Ganymede server +. To provide a backdoor.

  password username 15 privilege

  ! - To apply the aaa on the router model

  AAA new-model

  ! - Following command is to specify our ACS

  ! - location of the server, where is the

  ! - ip address of the ACS server. And

  ! - is the key which must be the same during the FAC and the router.

  radius-server host key

  ! - To get the authentication of users through ACS, when they try to log - in

  ! - If our router is unable to join the ACS, we will use

  ! - our local user name & the password that we created above. This

  ! - we prevent locking.

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  AAA authorization config-commands

  AAA authorization commands 0 default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + local

  AAA authorization commands 15 default group Ganymede + local

  ! - Sequence of commands are for posting to the activity of the user.

  ! - When the user connects to the device.

  AAA accounting exec default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  --------------------

  ACS configuration

  --------------------

  [1] Goto 'Profile components shared' a-> 'Shell command authorization sets'-> 'Add '.

  Provide any name at all.

  provide sufficient description (if necessary)

  (a) for full administrative access set.

  In the unmatched controls, select 'allow '.

  (b) for all access limited.

  In the unmatched controls, select "decline."

  And in the field above 'Add a command' box, type in the box below and the main command "permit unmatched Args" Order under allow.

  For example: If we want the user to only have access to the following commads:

  opening of session

  Logout

  output

  Enable

  Disable

  Show

  Then, the configuration should be:

  -----------------------------------------------

  -Allowed unparalleled Args.

  -----------------------------------------------

  connection permit

  permit disconnection

  exit permits

  Select the permit

  disable the permit

  license terminal configuration

  ethernet interface license

  permits 0

  to see the running-config

  ------------------------------------------------

  in example above, user will be allowed to run only from commands. If the user tries to run the interface ethernet 1', the user will get "failed command authorization.

  [2] press 'submit '.

  [3] Goto Group on which we want to apply these command authorization set. Select 'change settings '.

  (more...)

• Integration of ASA with ACS

  Hi all

  I try to incorporate some ASA (8,6) with ACS (5,7), here is the configuration of the SAA.

  SH run | in aaa
  RADIUS Protocol RADIUS AAA server
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + (management) host 10.243.14.24
  GANYMEDE + LOCAL console for AAA of http authentication
  authentication AAA ssh console GANYMEDE + LOCAL
  Console telnet authentication GANYMEDE + LOCAL AAA
  AAA accounting console GANYMEDE + ssh
  AAA accounting command 15 GANYMEDE privilege +.
  Console telnet accounting AAA GANYMEDE +.
  AAA authorization exec-authentication server
  AAA authorization GANYMEDE + loCAL command

  The problem is that I can get connected to ASA, but I can't type all commands in the CLI, I get the error message "failure of command approval.

  I have the same sets of commands and the shell profiles created for switches and it works perfectly.

  This is the behavior of ACS journals

  1. once I am having authenticated, I can see the logs in ACS with my username
  2 but when I type any commnds, is put down my permission and I see in the newspapers of the authorization of the CSA that this username is "enable_15".

  Can someone help me identify what the problem is

  Thank you
  Reverchon

  This happens when we have control permission enabled on ASA and try to run any command level 15 on SAA. To correct this problem you must check enable authentication of a user against GBA / GANYMEDE.

  AAA authentication enable console LOCAL + GANYMEDE

  After above listed licensing order, ASA will start to check the enable password against ACS/Ganymede and you use Ganymede activate the password that we can put on by user.

  ~ Jousset