Stuttering DVD with Satellite L series

Similar Questions

• Recording video camcorder to DVD with Satellite 1900

  I just tried to save a video from my camcorder to a DVD-R, but kept getting the message "disc not found" my computer is a Satellite 1900 and fortunately plays DVDs. but seems not to want to save them.
  The type of DVD makes all the difference, is there a way to make the computer recognize the disc in drive E:

  Video fortunately transferred from the camera to the computer and I can play on the computer, but it cannot transfer to a DVD disc, anyone with ideas?

  Hello

  One question; you have a DVD burner or just the DVD player!
  Please don't forget that you can also burn DVDs with your laptop and not only display.

  Second question; What burning applications did you use?
  I use Nero and it s my favorite burning program. It supports several modes of burning and burn the middle with best performance.

  Check it!

• Transfer of the old videos on DVD with Satellite M70

  Is it possible to connect a VCR to a Satellite M70 in order to transfer the recordings on video tape to DVD? If this is the case, should what cable I?

  Hello

  Since your laptop is only equipped with a TV OUTPUT, you cannot just plug a VCR on your machine, because to do this you will need a video in.
  The only chance you have is to buy an external video acquisition for PCMCIA or USB card.
  With these you´re of video capture card capable of receiving video signals outside and check/change their.

  Here´s a link that shows you an example of what I mean:

  http://www.beststuff.co.UK/hama_usb2_video_grabber.htm

  Hope that will help you.
  Welcome them

• A known issue with Satellite C855 series

  IM about to buy C855 - 2 EV, but I would like to know if theres a question with this kind of series such as heat problem or else.

  I don't know why I can't see my other post in the thread, I see only through my control panel

  Check this forum a little and try to find some discussions on Satellite C855.
  I put t think there should be a problem with it. Machine comes preinstalled with Win8 64-bit, so after the first start just to create your account and everything will be ready to use.

• Re: Need technical information about the CD/DVD with Portege 7200 series writer

  Hello
  just to clarify my last post should have read: CD and DVD rw burner compatible with the laptop above.

  all the best john.

  The Portege 7200 cannot be upgraded with a CD/DVD burner (drive).
  You can buy a dock like [this one | 5QQcmdZViewItem http://cgi.ebay.ca/Slim-TOSHIBA-Portege-7200-Dockstation-Built-in-DVD-CDRW_W0QQitemZ170200420841QQihZ007QQcategoryZ14008] which provides a feature of CD/DVD drive!

  I m not 100% sure if this docking station can be improved with a CD/DVD burner, but you can try to contact the ASP in your country for details.
  Guys might provide information whether or not this player is available!

• Collection with Satellite A200 series problem

  Hello

  I had problems at the start of Windows Vista. It does not run in any mode. When I try to recover (by pressing '0' to the screen, that nothing is happening).
  I used my recovery disks to restore the operating system. They run for awhile, and then a white screen comes up and it stops. Then I get PXE: memory, disk failure check cable.

  Finally, with some trial and error I could finally launch the recovery disks, when I try to recover with the factory settings it will stop with disc 2 does not end copy the files. Then I had to recover without recovery partition. After finishing, I found that it loaded Windows XP not Windows Vista. Where did Windows Vista go and how can get it back.

  Please someone help me with this problem.

  Thank you

  Hmmm... What Satellite A200 do you have exactly?

• Problem to recode DVDs with Satellite 1110

  I can't get my DVD to recognize that it is a CD or an unused blank DVD in the drive.
  Another mounted drive (Toshiba SD-R2212) with always the same problem. Seems like a software problem, but I don't know where or how to fix it. Can anyone help?

  Using Xp Pro with windows 2000 pro.

  Best regards, rsbthomas

  Hello

  First a couple of questions: you have a dualboot system installed? And now my favorite questions: which no software burning, you have installed? Installed more then another burning software?

  If so, which. Another thing might be if you have Nero, then there might be a plugin that can do the problems of recognition of cd players or media.

  Please give some information, perhaps, we can know where the problem is.

  Welcome them

• White screen starts with Satellite P series

  Hello

  My computer starts normally when I turn it on but the screen is black. I have re - start several times to have the screen on.

  What's wrong?

  WIndows 7 64 bit

  Right on this virtual path is not easy to say what the problem is here.
  Since when did you notice this?

  Have you installed any updates or anything that may be responsible for this?
  When you say that the screen is black it means that the screen is black but the background light work or the screen is totally black as when laptop is turned OFF?

• Cannot open the DVD with audio decoder AC-3 on the satellite series

  Hello!
  If I try to open a dvd with ac3 encoding on that, I get an error message saying "it is impossible to start the AC-3 audio decoder, because the moonlight odio dekoda filter is not enabled. "Please, send to: [email protected].
  But the address of the Web site does not load and no response on the e-mail address.

  If someone has had this problem and how can I solve this problem? Please help a novice.
  Many thanks Ste

  Why you n t use other programs like WinDVD or PowerDVD to play the DVD and watch DVD movies?
  The WinDVD must be installed on most of the newer Toshiba laptops.

• Can't burn any DVDs with my Satellite A660

  I have a DVD burn on my laptop Satellite A660 number but I can still play DVDs with full transparency.

  I caught the error in the disk creator.

  http://S10.postimg.org/wuzwxi9c9/DVD_Player.jpg

  I tried 5-6 DVD and all give the same error.

  Try to clean the lens ODD.

  Have you tested with different burning applications?

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• Satellite A105-S2101 - can't watch DVDs with Express Media Player

  I have this laptop Satellite A105-S2101, and the LCD breathed on me in two years.

  Fortunately, I can still use the VGA and S-video output but it may as well be a desktop PC now. Anyway, I just wanted to add that because of this problem, no longer is I can watch DVDs with Express Media Player because it will not accept VGA or S-video as default is just my broken - up, good for nothing always blurry LCD anyway.
  It's only when I'm in Windows mode can I switch to an external monitor.

  The reason I'm writing is, if it is necessary to add anything to an EMP update - this is the time and it would be something to add. What the devil?

  Have you tried another player?
  I prefer the VLC media player. He plays the most video and audio files, it s freeware and easy to use. Check it!

  Have you changed something on your hardware or software configuration before this happened?
  Maybe it's time to reinstall the drive Media Express

• Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

  I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
  He tells me to update the video driver or install a new video card.

  I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

  Someone had this problem? How did you solve this problem?

  Thank you.

  First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
  I put t know if you use a graphics driver right but necessary for correctly working Vista.

  The user Scooby1966 has posted a nice Vista tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

  By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app

• After that the installation of first elements of dvd with the series nr.install 11 is interrupted and uninstalled

  After that installation first elements 11 DVD with the nr.install series is interrupted and uninstalled. What should do?

  Troubleshoot installation, http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements-premiere.html

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye