Subsidiary ledger of the Exceptions narrow period report ERROR

Similar Questions

• How to generate the AWR compare period report comparing No. continues period

  Hi guys,.
  
  I take a photo based CWA at all hours for a week.
  
  Now, I would compare the snapshots collected during the day (between 08:00 and 04:00) for snapshots collected during the night (between 18:00 to 06:00) for not only one day, but throughout the week.
  
  I just want to ask you how can I generate an AWR report compare with these pictures?
  
  Do I have to use some template base AWR special or something?

  Eric.Zhou wrote:
  For 7 days, I take 2 basic lines every day, the first inlcude reference performance data collected from 08:00 to 17:00. The second category includes data from 18:00 to 06:00. So I will be having 14 lines at the end of the week. See below:

  Reference collected during the day: day_baseline_1, day_baseline_2, day_baseline_3, day_baseline_4, day_baseline_5, day_baseline_6, day_baseline_7
  Line base gathered during the night, night_baseline_1, night_baseline_2, night_baseline_3, night_baseline_4, night_baseline_5, night_baseline_6, night_baseline_7

  I like to summarise the data collected in the "day_baseline_7 day_baseline_1" then compare it to the data that were "night_baseline_1 at night_baseline_7".

  A step in this direction will be to export the AWR (there is a script awrextr.sql that can help with this) and then would drop snapshots for the baselines during the day. You can then generate a report covering the week of nights. Import the AWR (there is the script for this, too), drop the night base lines and generate a report for the week of days. You will have to compare them by hand, but you all week in each report.
  Everything good?

• PCI-1588 fails the self-test and reports error-50550

  I install the drivers for my card NI PCI-1588 and I get the following error:

  The device of that test has failed. From the device driver error report is as follows:

  Error-50550 occurred at the self-test

  Now, I normally don't get angry when I see a mistake, but when the error code is undocumented I said, why?

  In any case, my event viewer says:

  LabVIEW information: error: 400 'Bad Request' for 'deletetree', file ' ': unsupported protocol.

  [nitsuu] [[NO-Sync]]  Fatal error:.\source\nitsu\service\tDriverInitializer.cpp:80 - an error is causing this device OR Sync to the failed to initialize, error-50550 code

  Has anyone else seen this error?

  I'll try to change the location in which my PCI card has been installed, but I would appreciate some debugging info.

  Thank you

  The self-test would occasionally fail my last update... after reinstallation of windows and the only solution I've found that never fails is to go to Device Manager, uninstall the device from there (do not delete the source files for the driver), and then rescan immediately a new material.

  Then it would work in data acquisition!

• Receive the Exception on a TokenID errors

  I use the workflow in this link: http://www.vcoteam.info/articles/learn-VCO/176-how-to-retrieve-workflow-execution-details.html to retrieve the details of execution workflow. Thanks Burke. I want to be able to print any error "Exception" which has produced also to System.log. How can I do this?

  Here is the same code with fixed bracket:

  var tokens = requestFlow.executions; // Each execution is a "workflowToken" object
  for each (token in tokens) {
    try {
      if (token.isStillValid) {
        System.log("");
        System.log("==== Checking token ====");
        System.log("Start Date: "+token.startDate);
  
        if (token.endDate != null) {
          System.log("End Date: "+token.endDate);
        }
        if (token.exception != null) {
          System.log("Exception: "+token.exception);
        }
      }
    } catch(ex) {
      System.log(ex)
    }
  }
  

  I also added a few lines to print the property exception to the workflow token (see the last statement in System.log () above). I guess that's what you want.

• When and how the subsidiary ledger data are filled in the Table XLA_DISTRIBUTION_LINKS

  Hello gurus
  
  I worked on a subledger of accountants and I was able to get a fair idea of how data is transferred from XLA_DISTRIBUTION_LINKS to XLA_AE_LINES and XLA_AE_HEADERS. According to my understanding, "Create Accounting" course XLA_DISTRIBUTION_LINKS data will comes down to from JOUNRAL_LINE_TYPES rules and conditions to load in XLA_AE_LINES and XLA_AE_HEADERS. Then during the 'Transfer to GL', data XLA_AE_LINES and XLA_AE_HEADERS are transferred to the GL Tables. What I did not understand, is when and how the data is loaded in XLA_DISTRIBUTION_LINKS. What are the rules and conditions and during what stage data will be charged at XLA_DISTRIBUTION_LINKS table? Can someone please explain to me how the data is transferred from the subsidiary ledger of the panels to the Table of Distribution of the SLA?
  
  Thank you
  Sunny.

  Top Notes are good.
  But I just wanted to add a point of fertilizers.
  xla_distribution_links and xla_ae_lines will be filled at the same time.

  The two goes on JLTs and their conditions. One is detailed and the other is summarized / merged.
  xla_ae_lines aura balancing additional lines and xla_distirbution_links were going to win extra / loss lines, which end with zero amount.

  Also check the links for the installer of identifiers for distribution.
  http://docs.Oracle.com/CD/E18727_01/doc.121/e13420/T193592sdextchap.htm#sdextacattg
  http://docs.Oracle.com/CD/E18727_01/doc.121/e13420/T193592sdextchap.htm#sdextdisidg

  By
  VAMSi

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• Installation of the Interactive Web Client - Reporting Hyperion

  Hello

  Trying to open the reports in the creation of interactive reports, the first window that appears is:

  

  The top of the window that is associated with this link "jar: . http:// < Hyperion IP >: 19000/workspace /... /... / InsightInstaller/Insight.jar!/Installation_page.html?-l0009 " ". and my local machine comes up with 'no apps are installed to run this type of link (jar)' and yet I have Java installed on the machine.

  The strange thing is when I click on tools-> installation-> Interactive Reporting Web Client through the installation process successfully and still when I open a report it does not recognize that I have already installed the client.

  I'm curious to know if Miss me anything from my local computer? I need to install a version of Java? I'm under IE 11 in compatibility view and 1.8.0_73 64-bit Java

  I suggest that check you the Support matrix product

  http://www.Oracle.com/technetwork/middleware/bi-Foundation/Hyperion-supported-platforms-085957.html

  11.1.2.4

  x 86

  Microsoft Windows

  Windows 7

  Internet Explorer 9.x Internet Explorer 10.x Internet Explorer 11.x Firefox 31 + ESR 29 + chrome

  1 1.6 GHz minimum CPU required. 2. to work on Internet Explorer and Firefox, Manager of calculation requires Adobe Flash Player v10 + must be installed. 3 EXCEPTION: Internet Explorer 11.x is certified for creating interactive reports only when it is used with the client iHTML. Internet Explorer 11.x Enterprise Mode is supported for creating interactive reports only when it is used with the Web Client. See MOS ' Interactive Reporting in Internet Explorer 11 using the company to Emulate IE 10 (Doc ID 2015779.1) support limited ", note for details and exceptions. 4 EXCEPTION: Firefox 31 + ESR is not supported for creating interactive reports. 5 29 + chrome is approved for the planning and only with simplified Interface.

• I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

  I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

  For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

  Many users report the same error recently and so far have all AMD/ATI graphics cards.

  If all goes well the graphic driver update will help.

  If the problem persists, consider uninstalling 2778344.

  Then, at the moment, 'hide' 2778344.

• How update the calendar in the mapping of period FDMEE source

  Hello

  We are looking to update the calendar in the mapping of period FDMEE source.

  I have attached the screenshot. Once I chose the MD (jan - Dec), the year GL calendar details up to 2014 is coimg upward where 2015 is still missing.

  We would like to know how to add details to the year 2015... where this timetable is maintained.

  Our source is Peoplesoft General Ledger and target is "ARM."

  Please notify.

  Thank you

  Rigot

  I assume that the timetable is kept in TFTP so if 2015 has been another year added you initialize again your source system.

  Have you already tried?

  Concerning

• AQ notification callback procedure does not. It's going to the exception queue

  I use: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  I recorded in my prior queue of callback procedure, but it does not work once I recompiled the procedure according to the AQ$ _AQ_SRVNTFN_TABLE_1_F, It's going to the exception queue.  How can I find why it is wrong to the exception queue?

  Select * from SYS. USER_SUBSCR_REGISTRATIONS;

  303

  ""ALERT_Q"

  PLSQL://callbackEnqueueIndvl

  57

  FF

  1

  AQ

  DEFAULT

  DB REG

  0

  MAY 22, 14 12.17.05.375385000 PM - 04:00

  Select * from AQ$ _AQ_SRVNTFN_TABLE_1_F by enq_time desc;

  AQ _AQ_SRVNTFN_TABLE_1_E $

  AAISqUAACAAAFh3AAQ

  F93D79F05F030F5DE043134C100A2FFE

  0

  3

  MAY 22, 14 12.26.23.237482000 PM

  3.20.92125

  5

  AQ_SRVNTFN_TABLE_Q_1

  0

  0

  0

  0

  0

  [SYS. [AQ$ _SRVNTFN_MESSAGE]

  PERSISTENT

  0

  0

  2173603

  Thank you.

  Hello

  Check if there is no qmon, j00 * follow-ups generated around the same period.

  Thank you

  Renu

• Select the exception

  Hi all

  I ask you what type of exception can trigger a select statement excluding the NO_DATA_FOUND;

  For example, I try to execute the following:

  Select * from departments where departments_id = 11;

  In such a situation, what kind of oracle error can trigger?

  I ask this because I have some procedure just do a select statement and I would like to know if there is a valid reason to put with the exception of others at the end of the procedure.

  Thank you very much

  Francesco;

  The fundamental reason why this approach isn't true, is that the code subverts how the language is designed to deal with the error.

  The PL/SQL language (such as Java, c#, C++, Delphi, etc.) is DESIGNED to deal with errors as exceptions that are raised, lifted to the top of the stack of calls and taken and acted upon if necessary. There are no surprises. I call your code. I use an exception handler to determine whether your code has been executed successfully.

  With the settings, I call your code. I now need to assess the parameters out and guess what the meaning of these parameters. I should add the additional processing of conditional branch in my code. It becomes a mess - there is no contract to clear code between your code and my code and how it handles the call.

  Except for the exceptions that the contract exists. Is standard. Always behave the same way as it is designed in the language. And I don't have in my code, guess the meaning of your out parameters and add extra code to treat your settings out.

  Your "5-year old production approach" is DANGEROUS. And EVIL. Period.

• Server became the exception system when it is connected to more than one group of network

  I did the capacity planning on a server centos with 2 network cards. 1 connected to a public IP address and the other connected to a 1 private IP address. Scheduler capability of this server in 2 groups of subnet. When I ran the assessment, it is as a system exception lists. How can I change the report so it won't be listed as such?

  I also found that when I deleted this server in Capacity Planner and add it back with its private IP address it was always part of the IP column seen by its public IP address while private in alias, IP address although I had unchecked group of the public in its setting IP address subnet.

  Capacity planner version is 2.8.0

  Reason for the exception

  The system belongs to several groups

  Resource of exceptional value

  SUBNET: 192.168.2.0, SUBNET:
  202.xxx.xxx.

  You specify the script optimization of networks to merge.  By default, servers in different networks should be distributed on the unique ESX hosts.

  ESX can handle it anyway, by having several groups of ports & VLAN assigned, which shouldn't be a problem overall.

  Best regards

  Jon Hemming

• 10g: re-raise the exception modifies the call stack

  Hello! I'm "Oracle PL/SQL Reference" and trying to re-raise the exception:
  

  begin
    dbms_output.put_line('line a');
    raise no_data_found;
  exception
    when others then
        dbms_output.put_line('line b');
        raise;
  end;

  Oracle reports exception was thrown on line 7, not 3. Apparently "re-raise" modifies the call stack, making it of no use: I can throw a new exception with the same success. It is not re - raise a conventional sense of the term. The question is, is there a possibility to actually STILL raise exception, without changing the call stack?

  A reference to 'Lines followed by Steven Feuerstein'

  Impact of multiple reminders

  Often, an exception occurs at the bottom of the execution stack. If you want this exception to propagate all the way to the PL/SQL block outside, it should be re-relief within each exception handler in the stack of blocks. Listing 3 shows an example of such an event.

  Code Listing 3: Re-raising exceptions to the outermost block on the stack

  CREATE OR REPLACE PROCEDURE proc1 IS
  BEGIN
     DBMS_OUTPUT.put_line ('running proc1');
     RAISE NO_DATA_FOUND;
  EXCEPTION
     WHEN OTHERS THEN
        DBMS_OUTPUT.put_line (
           'Error stack in block where raised:');
        my_putline (
           DBMS_UTILITY.format_error_backtrace);
        RAISE;
  END;
  /
  CREATE OR REPLACE PROCEDURE proc2
  IS
     l_str VARCHAR2 (30) := 'calling proc1';
  BEGIN
     DBMS_OUTPUT.put_line (l_str);
     proc1;
  END;
  /
  CREATE OR REPLACE PROCEDURE proc3 IS
  BEGIN
     DBMS_OUTPUT.put_line ('calling proc2');
     proc2;
  EXCEPTION
     WHEN OTHERS
     THEN
        DBMS_OUTPUT.put_line ('Error stack at top level:');
        my_putline (DBMS_UTILITY.format_error_backtrace);
        bt.show_info (DBMS_UTILITY.format_error_backtrace);
  END;
  /
  

  When I run the code in Listing 3, I see the following result:

  SQL> exec proc3
  calling proc2
  calling proc1
  running proc1
  Error stack in block where raised:
  ORA-06512: at "SCOTT.PROC1", line 4
  Error stack at top level:
  ORA-06512: at "SCOTT.PROC1", line 11
  ORA-06512: at "SCOTT.PROC2", line 6
  ORA-06512: at "SCOTT.PROC3", line 4
  
  Program owner = SCOTT
  Program name = PROC1
  Line number = 11
  

  When I call the function backtrace in the program at the lowest level, it correctly identifies the line 4 of proc1 as the line where the error is mentioned. I then re - raise the same exception using the statement of RECOVERY. When the exception propagates to the outermost block, I call the backtrace function once again and this time it shows that the error was raised at line 11 of proc1.

  This behavior, we can conclude that DBMS_UTILITY. FORMAT_ERROR_BACKTRACE watch the running back to the last trace LIFT during its session. As soon as you issue a STIMULUS to a specific exception or re - raise the current exception, you restart the cell which produces the backtrace function. This means that if you want to take advantage of the DBMS_UTILITY. FORMAT_ERROR_BACKTRACE, take one of the following two approaches:

  Call the function backtrace in the section of the exception to the block in which the error was raised. This way you have (and can connect) that line number critical, even if the exception is re-relief more further upward in the stack.
  Avoid exception handlers in your carpet intermediate programs and call the function backtrace in the section except for the outermost program in your stack.

  Full article available here

  http://www.Oracle.com/technology/oramag/Oracle/05-Mar/o25plsql.html

• allow the exception of redirect permanently, from the firefox prompt "allow."

  Hi, is it possible to allow (as an exception (permanent) since this notice of redirection by firefox window?

  Workflow

  (1) redirections and pop ups are not allowed by default in my preferences

  2) allow Firefox shows me this option and I click? allow while I'm using this Web site

  (3) However, this site is a new forum I have just joined, so I prefer to be allow to add it as an exception permanently from this place. Please see screenshot.

  (4) rather I go to preferences, security, and add the exception in manually in the pop-up window. I think I did it properly.

  Thank you

  This function is very limited. It was designed as an accessibility feature to avoid any software screen reader to be confused by changes in context. It's terribly incomplete as a tool of security possible, because there are several ways to redirect and the functionality is only about some of them. And of course there is no way to make exceptions based on the site. If all goes well, there is an add-on that does what you need.

• How do you turn off the coast of photographic reports (live).

  How do you turn off the coast of photographic reports (live)

  Hello always56,

  Thanks for this info and choosing the communities Support from Apple. I know how important setting in the camera options soft photo is for you!

  Looks like you want to disable Live Photo when shooting. Live Photo is enabled by default. To turn on or turn off, tap on the Live Photos, and when this icon is yellow, pictures Live is on. Here is additional information that will help to understand further.

  Take pictures and videos - iPhone

  See you soon!