PCI-1588 fails the self-test and reports error-50550

Similar Questions

• DAQmx for DAQcard6042E fails the self-test. Inherited data acquisition is OK.

  The computer I'm working on was provided by my client with LabVIEW 7.1 and the 6024E installed.  They had obviously written a program or two with this configuration, using Legacy DAQ screw.  (Of course) I would use DAQmx instead, but I'm having no luck.  Self test fails for inscription on the list of Council DAQmx (error-88705) MAX, but that's OK under traditional DAQ.

  Versions: LabVIEW 7.1

  (run 7.0, 7.1, 8.0, 8.2)

  MAX 4.1.0.3001

  NOR-DAQmx 8.3.0f0

  7.2.of1 OR-DAQ trad

  Any ideas?  Thanks if you can help!

  Hi Spencer60!

  This error message is generally returned when the Windows Service OR charger device (or "nidevldu") does not work.  Take a look at the following KB and let me know if you have any other questions.

  Device charger OR (nidevldu) and NI Configuration Manager service does not start

• The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  Ok.  So you're screenshot compared to SCORM clouds now shows you're scoring 100% in the quiz, but your state of completion will still come out incomplete.  Then of course, your quiz notification settings not award success based on passing the test.

  Try to set your quiz the way I show this screenshot using SCORM 1.2 instead of 2004.

  

• Satellite M40: Modem fails the diagnostic test on WinXp Pro

  Satellite M40 comes with Windows XP Home Edition pre installed and when I ran the diagnostic tools to test the modem the modem passes the test. But when I installed Windows XP Professional SP2 media center, the modem fails the diagnostic test.

  What surprises me is that I have not received any error during installation and all devices, including the installed modem OK with no problems.

  Another observation when I tried to connect to the Internet using our dial back of company during installation of Windows XP Edition family's volition I remembered and the modem responds very well. But with Windows XP Professional SP2 media center installed the modem call how ever in "waiting for call-back ', when the server of our company try to call me, the modem does not respond and waits until I get the message Time out

  Please if anyone has an explanation for this decision No. let me know because it is driving my nuts.

  Thank you
  Oumy

  Hello

  Have you tried to install the latest driver of modem? Please check if you have the right driver for Win Xp. You can find the drivers on the Toshiba site.

  http://EU.computers.Toshiba-Europe.com

  They are a lot of drivers for countries individually.

  In addition, Windows XP SP2 includes the new Windows Firewall. It is possible that the firewall is preventing the modem connection. You can try to disable the Windows Firewall.

  Good bye

• Pavilion G6: HDD failed the short test

  Hi, after a reboot my laptop decided to do not restart. Run diagnostics produced the failure id 0g9vuf-6gc88t-mfpx0k-60qf03 for short control of DST hard drive. Can someone please confirm that my hard drive is dead and must be replaced. Thank you.

  Hello

  The error code confirms a drive failure short self test and would indicate that the drive must be replaced.

  Kind regards

  DP - K

• Diagnostic test error: drive hard hitachi failed the diagnostics tests

  My computer is a HP Pavilion 6500 series; Windows 7 64-bit. under 18 months.  Receipt of the following error messages to a HP diagnostic test: drive hard Hitachi failed the diagnostics tests: test to look at random; funnel seek test; surface scan test. Please notify.  I need to replace the hard drive?

  Hi Pete,.

  You are welcome.

  It is difficult to say exactly why the HARD drive started to fail and there's always a random item concerned - I've known a few hard drives fail after a few weeks, while others can be quite happily far longer than expected.

  Best regards

  DP - K

• How is - that someone is uninstalled S.M.A.R.T. (Self Monitoring and Reporting Technology) of Windows Vista?

  Yesterday morning, S.M.A.R.T. (Self Monitoring and Reporting Technology) technology has taken control of my data recovery files and tries to extort a fee to join their program. but I can be released from their 'hold' on my computer if I go to: all programs, and then in the data recovery folder, then to the uninstall option and then uninstall S.M.A.R.T.   The problem is that VISTA does not have a record of data recovery I can access, then, what do I do?

  Hello

  There are a few variants of S.M.A.R.T.

  Follow these guides.

  http://www.bleepingcomputer.com/virus-removal/Remove-Smart-HDD

  http://www.bleepingcomputer.com/virus-removal/remove-smart-fortress-2012

  http://www.bleepingcomputer.com/virus-removal/remove-smart-protection-2012

  See you soon.

• I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly a

  Hello

  I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.

  Hello

  Also see also software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• Unable to see Report.trace and Report.error newspapers

  Hi all

  I tried to implement the Report.trace and Report.error check in one of my component, I'm able to see it in the active Sections but its not out there tracking logs display.

  Here's the code I used.

  at the entrance of the file:

  Resource definition:

  resources

  Resources/ampffacontentpublishlistner_trace.htm

  ampffacontentpublishlistner_TracingSections

  10

  Merge rules:

  ampffacontentpublishlistner_TracingSections

  IdcTracingSections

  itsSection

  10

  Def resource file:

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 ">"

  < title >

  ampffacontentpublishlistner staticResTable

  < /title >

  < / head >

  < body >

  < ampffacontentpublishlistner_TracingSections @table @ >

  < table border = 1 > < legend > < strong ampffacontentpublishlistner_TracingSections > < / strong > < / legend >

  < b >

  itsSection < td > < table > < td > itsDescription < table > < td > < table > itsDefaultEnabled

  < /tr >

  < b >

  myfacacheclearlistener < td > < table > < td > < table > < td > < table > csTraceMyFACacheClearComponent

  < /tr >

  < /table >

  < @end @ >

  < / body >

  < / html >

  Java code:

  public static String m_strCompTraceSection = "myfacacheclear";

  Report.trace (m_strCompTraceSection, "seizure doFilter" null ");

  Please let me know if any changes need to be made

  Thank you

  Veillon

  I see different section/follow-up in you name are java code and the name of track section configured.

  myfacacheclearlistenercsTraceMyFACacheClearComponent

  public static String m_strCompTraceSection = " " myfacacheclear ";

  Report.trace (m_strCompTraceSection, "seizure doFilter" null ");

  value of the m_strCompTraceSection variable must be = ""myfacacheclearlistener "."

  
  

  You can also check by adding / activating manually ""myfacacheclear "which is in the list of the section."

  
  

  Thank you

  Vikram
  

• Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  What is the model of the printer?

  See related thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/escndv-is-incompatible/a1521e27-f6dc-4c9c-B990-b98c721c74a1

  Have you tried to install the drivers using the Compatibility Mode?

• PCI-6224-88302 during the self-test error code

  Hello

  I'm having a problem with the auto test my card PCI-6224 in my computer. I am able to run 2 different tables successfully on 2 different computers, but this computer is that it seems to give me trouble.

  When I open NI MAX to run the test, it gives me a code error-88302 and explains the problem with the connection. I have tried unplugging the DAQ for my circuit and rerun the test but got the same error.

  How can - I have worse to pull this problem to take my next steps to solve this?

  Thank you

  Brandon Deal

  Yes, at this point, it sounds like a software on this particular calculation problem - most likely a problem with DAQmx. What version of currently installed DAQmx? When you try the first troubleshooting steps that I recommended, don't you just fixed DAQmx or upgrade to the latest version of the driver? If you just fixed your existing installation, you can try upgrading to DAQmx 9.8 instead. You can download DAQmx 9.8 from the link below.

  NOR-DAQmx 9.8

  http://www.NI.com/download/NI-DAQmx-9.8/4297/en/

  Alternatively, you can try to reset the MAX configuration data. It is rare for this to happen, the MAX configuration database may be damaged, which may cause sytem problem as you can see. Follow the steps outlined in the document below to reset configuration data.

  What is the process to reset the MAX Database?

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  At this point, it is probably just a matter of identifying what software is defective/corrupted and repair/reinstall. You can continue to try to do for this machine, or if you have another machine of work available, you can switch to this computer - depending on what is most convenient for you.

  Kind regards

• HP Envy x 360-m6-w102dx: primary HARD drive Bay * failed the Diag Test

  Hello

  When I turned on my laptop this morning, he showed a black screen with text showing "an imminent failure" and run diagnostics. I ran diagnosis on everything, and when he came on the hard drive, it showed a failed test of "Primary hard disk 1 HDD Bay." I tried to contact HP support and all led here. I am very inexperienced with computer problems and would like to find a solution to this. If it helps, the failure ID is 0GC3HW - 7P881T - GXGJMF - 60DT03. That failure came from a SMART hard disk check and I don't know if this seems to indicate a failure of the hard drive and I don't know what else to do. My laptop cannot start and there is no lead back me to the screen black with the same texts when I turn turn it back on.

  Mfortuno, welcome to the forum.

  The SMART test does not, therefore, you have a failing HARD drive.  The only solution is to get it replaced.  If you're not compfortable with opening the case of your laptop, you should take it to a computer repair shop called.  While I'm not a big fan of the Geek Squad, they sell HP computers and know them well enough.  You should buy a HARD drive that is the same size or larger and the recovery media can work.  In my view, that it is a video that allows you to install the SSD or HARD disk.

• Modem failed the diagnostic test

  I ran a Windows diagnostic test and it came with this test failure modem Agere Systems PC1Soft MC921-2w what it takes please

  Hello

  ·         What is the brand and model of the modem?

  ·         What were the changes made on the computer prior to the question?

  I suggest you contact your ISP or Modem manufacture to improve assistance on the issue. In the meantime, you can follow these steps and check if that helps.

  (a) reset your modem. See the documentation for more information on how to reset the modem.

  (b) If you have an external modem, make sure that you use the right cable series. For more information on the requirements for a proper wiring, refer to the section 'Wiring required Configuration' in aid of Dial - Up Networking.

  (c) If you have an external modem, make sure that the serial cable is properly connected.

  (d) If you use an adapter to connect your external modem to your serial port, make sure that the pin adapter is wired properly for modem communication. For example, a 9-to-25 pin for a mouse adapter malfunctions with a series of RAS configuration.

  (e) test the serial port or multiport card and replace the adapter if necessary.

  (f) ensure that the modem communication protocol options are configured correctly. See the documentation for more information about the different transfer protocol options that are available for your modem.

  (g) contact the modem manufacturer to see if the initialization and configuration information are available for your modem. Also, check the Windows hardware compatibility list most recent (HCL) to make sure that your modem is supported.

  (h) use the Device Manager to remove the modem. You can do this in safe mode or in normal mode. Restart the computer in normal mode. Windows XP will detect the modem and reinstall the proper drivers.

• NB just by making the effort test and does not start backup

  HP dv7-4177 started having types, wouldn't restart. I tried to test that are inbeded and when I did the stress test he stops and does not restart. I hit the power button and nothing happens. I took the hours of battery sevealr and handed over in but I have nothing seems to help.

  Hello Nutn Spec.  I understand that your notebook is currently unable to boot.

  What kind of questions you know before performing the stress test?  This will help me identify the cause of the problem.

  Have you tried to do a hard reset?  It drains all the residual energy of the laptop and hardware reset forces.  If you haven't tried this before I would suggest trying the following.

  1. Make sure that the laptop is completely turned off.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad.

  Let me know the result.  I will keep an eye out for your answer.  Have a great night!

• In the browser, the title of my page is added with the word "Test" and my URL contains additional characters.

  Hello!

  When I publish my site on my server, the pages appear fine but my page titles all have the word "Test" added to them even if I did not use this word in the titration or by mentioning my Muse pages.

  Also, the URLS of the pages equipped with additional characters after the .html. I don't know what is the cause.

  Anyone know what is happening here and how I can fix?

  Thank you!

  

  See the clearer screenshot: http://screencast.com/t/6kEZHuQGOU0V

  Hello

  Go to the "Presentation" of your 'Page Properties' section of the master page and check if it says 'Test' in the section "prefix to the Page title. Check this short video to find out how to check it: http://jingsite.businesscatalyst.com/jing/2013-10-03_0258.swf

  On the suffix in the URL of the pages, I noticed that some pages have the suffix and some of them did not. In addition, the suffix charge only once the pages are loaded (therefore is not part of the URL). It may be related to a code that you have added to pages or the "HTML for the head" section of these pages. You can check this aspect once and try to remove the codes to check if these suffix disappear.

  I hope this helps.

  See you soon

  Parikshit