Installation of the Interactive Web Client - Reporting Hyperion

Similar Questions

• The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  Hi all

  We currently use DRM Version 11.1.2.2.302 patch.

  We are facing the error when we open the web console below.

  The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  It used to work very well and we see that this web configuration file has been updated. I assume that there is a problem with Internet Information services.

  Any help would be greatly appreciated.

  Thank you

  VINET

  Hi all

  The Web configuration file has been modified by windows service and after restarting the server, new web configuration file has been created and we have web access console.

  VINET

• the closing force of the vSphere web client session after 10 minutes of inactivity.

  To meet the requirements of security, a user admin with a vCenter Server Appliance must

  the closing force of the vSphere web client session after 10 minutes of inactivity.

  That the administrator must do to meet the requirement?

  This much help

  Edit: var/lib/vmware/vsphere-client/webclient.properties, change session.timeout = 10

• I can add a host for a new installation of the customer web vpshere

  I have a new installation of the UNIX client.

  I have a new installation of esxi 5.5

  I'm trying to manage the new host through the web client. How can I add this host to the web client?

  This seems to be the problem, the administrator@vc55 is you computer administrator account. Login with these and check?

  username: [email protected]

  Password: SSO master password

• question about MRSA and the local web client

  Hi, I need to know if is possible activate in Siebel 8.2.2.0 local web client module of the MRSA. I want to do this to read and analyze the statistics generated for this tool.
  
  Thank you

  I don't think that it is possible to use MRSA for local web client. You can try using the recording by Doc below of events

  http://docs.Oracle.com/CD/E16348_01/books/RRAdm/reports9.html#wp1018257

  If you need the option sql coil use /s for short customer as described in the Doc ID 475564.1 on support.oracle.com:

  c:\siebel\bin\siebel.exe/c "c:\siebel\bin\siebel.cfg" / s "c:\temp\spool.sql".

  Thank you

  Wilson

• Install issue with the Oracle database Client in Hyperion 11.1.2.4

  We had problems try raising the EPMA server. I found digging that odp.net was necessary. It seems that we had missed client installation Oracle database on the machine. So I stopped the services and tried to install the client. It always ends with error:

  
  

  
  

  INFO: Loading file:/G:/Hyperion_Installation/Hyperion_11124_Installation/db64/Disk1/install/... beanstore/internship/shiphomeproperties. XML

  INFO: Translating the external format in raw format

  NEWS: Restoration of class file:/G:/Hyperion_Installation/Hyperion_11124_Installation/db64/Disk1/install/... oracle.install.driver.oui.ShiphomeMetadata/internship/shiphomeproperties. XML

  INFO: Loading Xml Bean store beans. [BeanStoreName:shiphome - metadata]

  NEWS: Development of the property: properties in the bean: shiphome-metadata

  INFO: the inventory location isC:\Program

  INFO: the inventory location isC:\Program

  INFO: Retrieve ASM Cluster File System information...

  INFO: the inventory location isC:\Program

  INFO: the inventory location isC:\Program

  INFO: estimated size for Administratorinstall is 1126.4000005722046

  INFO: Access path is: == > C:\Users\_HYPER~1\AppData\Local\Temp\OraInstall2015-07-16_08-27-52AM\jdk\jre\bin; C:\Windows\System32; C:\Windows; G:\Oracle\Middleware\dbclient32\bin; G:\Oracle\Middleware\dbclient64\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0; G:\Oracle\Middleware\ohs\bin; G:\Oracle\Middleware\ohs\opmn\bin; G:\Oracle\Middleware\ohs\opmn\lib; G:\Oracle\Middleware\ohs\perl\bin; G:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;.

  GRAVE: Name host [FATAL] [INS-32053] the specified Oracle already exists.

  CAUSE: The Oracle home name specified on the command line is a name of House of Oracle in the Central inventory.

  ACTION: Choose a different name at Oracle. Abandon this installation session and try again.

  INFO: Tips are ABORT

  INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set

  INFO: Completed state validating < getOracleHome >

  NEWS: Put an end to all operations in the background

  INFO: Finished all operations in the background

  INFO: Find the status of output more suitable for the current application

  INFO: Exit status is - 2

  NEWS: Stop Oracle Client install

  Now it looks like the issue is located here:

  GRAVE: Name host [FATAL] [INS-32053] the specified Oracle already exists.

  CAUSE: The Oracle home name specified on the command line is a name of House of Oracle in the Central inventory.

  ACTION: Choose a different name at Oracle. Abandon this installation session and try again.

  INFO: Tips are ABORT

  That means ODP.net cannot be installed in an existing home to Oracle. If this is not the case, how can I install it separately to get the job of EPMA.

  OK got it works by manipulating inventory. It seems that there is an old facility that was causing the problem.

• Problem with Installation of the Siebel Web Server Extension

  Hello
  IAM trying to install Siebel 8.1 on my pc... In fact its installed successfully... but due to some other reasons (to increase disk space on the C drive) I uninstalled it.
  Clean registry and deleled installation folder files. but when I am trying to reinstall it cannot go further to Siebel Web Server Extension. He stopping at the beginning... and the error is
  "Cannot find table.txt from the previous installation.
  Setup cannot continue.
  java.io.FileNotFoundException:
  "c:\sba\SWEApp\_uninst\eappweb\table.txt (the system cannot find the path specified).
  
  I uninstalled everything that he and cleaned the registry keys as well.
  could you please help me how to fix this error...?

  Hello

  Assuming you are using windows 2003 and you have not installed another siebel server software, go to c:/windows folder, make a backup of the current vpd.properties file, remove it and restart your installation again. file VPD. Properties is created by installshield to keep track of the facilities. It is always good to have a backup in case you have problems installing. Support.oracle.com Doc ID 520528.1 has more information on this file.

  It will be useful,

  Wilson

• Cannot install x 86 kb2729450. Cannot find the installation on the microsoft Web site. Unable to get any help from Microsoft, if it is valid. I have window xp OS

  I have Windows xp OS.  Installation is underway for about a week. Don't know if the installation is a valid installation of Microsoft.  Ran a virus/malware scan etc. and negative.

  Hi John,.

  Thanks for posting in the Microsoft Community.

  I understand that you can not install kb2729450.

  Before you start the troubleshooting steps, I need the information required.

  1. you receive an error message?

  2 are you able to install other updates to windows correctly?

  3 did you changes to the computer?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  I suggest you of for windows update issues, visit the link.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Cannot install Windows updates

  http://support.Microsoft.com/kb/555461

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  Security Update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35692

  See also:

  MS12-074: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 13 November 2012

  http://support.Microsoft.com/kb/2729450

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP &amp; Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• Change the default Port of vSphere Web Client to any other port 9443

  How can I change vSphere Web Client by default Port 9443 for any other port in Windows vmware web client server after the installation of the client web and vCenter camera well?

  You can change the post-install Web Frontend Client vSphere 5.1 port by editing the following on the Server Web Client configuration file:
  

  C:\Program Files\VMware\Infrastructure\vSphereWebClient\server\config\tomcat-server.xml

  
  

  Find the entry below and change the port accordingly:
  

  Then restart the WebClient service to make the change take effect.

• Add custom button to the right of SEARCH in the interactive report

  Is it possible to add a custom to the right of the search bar button

  ApEx 3.2.1 < == do not laugh

  S.Bovin wrote:

  Is it possible to add a custom to the right of the search bar button

  ApEx 3.2.1<== dont="">

  Create the button as a button in the region in the region of the infrared, with the Position of the button the value to the right of the Interactive Search Bar report.

• Why can't I see hosts/guests in my vCenter while I can see them in the Web Client vSphere?

  Hello

  IM new to VmWare\PowerCLI.  The goal is to get a list of VM guests in a vCenter via PowerCLI.  I can see 80 guests when I connect via the Web Client vSphere, but when I use the PowerCLI cmdlets, a Get-VMHost returns nothing.  I did the following:

  1 connect-VIServer the username-password IluvVmWare myserver.acme.com-acme\BigDog connects fine without error.

  2. $defaultviserver | Select * shows me the default connection properties.

  3 get-data center shows me 2 data centers; DC1 and DC2

  4 get-DataCenter DC1. Get-VMHost returns nothing

  5 get-VMHost returns nothing

  6 get-vmhost-Server myserver.acme.com returns nothing

  What I do wrong with PowerCLI so I can't get a dump of the hosts on the vCenter?  I can see them all in the vSphere Web Client, so permissions seem fine.

  It looks like that there.

  You must speak with the vCenter admin I guess.

  More simple would you give permissions to view read-only on the vCenter and let this authorization to spread.

  Out of curiosity, this shows the VMHostname?

  Get - VM | Select Name,@{N='VMHost'; E={$_. VMHost.Name}}

• "VerifyError: Error #1053: illegal override of CustomProxy...". ', for the plugin in Web Client 6.0

  I'm having a problem with a plugin developed for 5.1. Works very well with the two web client 5.1 and 5.5.

  I'm trying to deploy the same plug-in in the web client 6.0 and follows with the reference of this binding changes for compatibility:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  -Change Web-ContextPath, vsphere client /-name of the plugin in the MANIFEST. MF

  -Configured by default two channels, one amf and secure-amf services - config.xml and remote - config.xml.:

  After these changes, I was able to resolve the "cannot load resources... '. "errors. And I am able to see my plugin icon.

  
  

  I made changes to my own proxy class (CustomProxy) to use ServiceUtil.getDefaultChannelUri (). I added the ServiceUtil code to my plugin rather the upgrade of an SDK 5.1 to SDK 5.5.2.

  Now get an error message when you click the icon of the plugin:

  "VerifyError: Error #1053: illegal override of CustomProxy...". ». Please find the screenshot of the flash error attached drive.

  Could someone guide possible cause and resolution of the issue?

  
  

  Thank you.

  Now I realize the you will not be able to compile it:

  public void callService(methodName:String,_arguments:Array,_callback:Function_=_null,_callContext:Object_=_null,_ _opId:String_=_null_):void {}

  It turns out that BaseProxy backward compatibility is broken If we substitute the callService method . We'll resolve this in the next version of hotfix or update.

  I can you advice how to solve this problem for your plugin. And it will work with 6.0. But after that we released the patch, your code will break. The only thing you can do at this stage is to remove from your CustombaseProxy.

  So I recommend the following:

  1 extract the logic that you have about the utility class, for example ProxyArgumentsUtil

  I don't understand why keep you the reference to m_reqMetaData and not to create a new instance for each request.

  If you do this, you can have a simple util class with a single static method in it. If you need this reference, then your utility class should be instantiated.

  2. all the classes that extend CustomBaseProxy should extend directly the BaseProxy

  3. whenever you call callService, use this ProxyArgumentsUtil to manage your "arguments" parameter

  4. remove the CustomBaseProxy

  Apologize for the inconvenience.

• Google chrome is soon dropped in favour of web client plug-ins, so you have to use Flash to use the web client

  I use google chrome version 43.0.2357.81, since flash is no-no, recently I got this message when I connect my Datacenter, "this site uses a (VMware Remote Console Plug-in) plugin that soon unsupported. Currently, there are two warnings.

  Because IE and firefox requires flash to run the web client, so if Google drops support, several data center would 'LOVE' to use flash on their mission critical infrastructure. A big thanks to VMware to listen to the customer feedback, site Web de VMware is great product 100% customer love, you must be the leader when it comes to supporting your customers.

  

  follow this blog.

  http://www.vmwareminds.com/fix-Google-chrome-breaks-the-vSphere-Web-client-integration-plugin/

• Very slow performance with the Web Client vSphere

  I'm testing the vSphere Web Client, but I find it excruciatingly slow - it takes almost 5 minutes just to open a session, and each click after that I take a good load of 30 seconds before the new page is completed. I think I spent a good 10 minutes to total just go to the screen where I could power on a virtual machine, which is something that can been done in less than a minute using the traditional desktop client.

  Horribly misconfigured web client somehow?

  The following changes improved the performance of the web client of my client. So far, no more hung tasks, navigation in the console of the web client has been improved. We are always monitoring well.

  Has increased the heap size JVM of vSphere Web Client to 3 GB. Used the following KB KB VMware: settings of the configuration in VMware vCenter Server 5.1 and 5.5 Tomcat server