Substantive addition to the text

Similar Questions

• Opening additional tabs, the text in the tabs goes to the Eastern charicters, why?

  The opening of Fire Fox all's well until I opened an additional tab. Then the text in the tabs replaces, or is replaced by what appears to be the Oriental characters.

  Hello ejmasjr, the problem is mcafee site advisor extension, try to disable or delete the extension and you're OK.

  • How to uninstall SiteAdvisor

  Thank you

• ? on the use of models and the addition of the text please

  Hi all

  Thanks for looking... I don't know if anyone can answer that. I'm trying to learn flash here and I've seen some tutorials and managed to create an and add text, that animate the text as a hyperlink.

  My question is about those pre-made model Animations. As snow for example. When I opened my (new folder) select (models/snow). My time line has the entire model sitting on an image. While the animation of parts model when previewing, properly and for a full minute.

  Here's the rub '

  If I want to add text and use (presets of movement), a box pop up tells me it must be interpolated and I hit OK and text blocks (so that the layer) spring to 80 executives and (snow scripted model) remains in the image #1. I hit an excerpt and my text is what I want, but the snow scripted model which is only #1 remains in place and there is no background or model goes hand in hand with my text which has been tense for 80 frames.

  I can't find the answer to what I think should be a simple drag / (snow model) on the 80 frames to match the blocks of text, so everything is copasetic and alto. However, it is not as easy as hanging out video on a timeline.

  Anyone?

  Miserably stuck,

  Netcommercial

  Scripts defined on all frames where an object exists will continue as long as this object persists. for example, make a button on frame 1, extend to 5000 frame button. Just put a script on frame 1 that the button control. The button works for 5000 frames of the script on frame 1. However if you ever remove the button (for example to add a keyframe on the layer of button) and add new, the script will not work because it is a "new instance" and you will need to be run again the button works.

• Track substantive addition to the Captivate file in hearing

  Hello.  Does anyone know how to add a second track to my audio of the entire project once I have stumble at the hearing?  I want to add background music and control the volume that the Captivate for a background audio clip feature.

  You have no answer yet, probably because the question is not clear. You use the feature back and forth to edit audio project in hearing? If Yes, what version of Audition and Captivate you use? If you are indeed looking for a stream of work add a track to the hearing, maybe you'll have better turn on the forum of the hearing.

• The substantive addition to the Acrobat DC file makes large file

  Help! In the past (later than Acrobat XI) I did the envelopes to mail merge using Microsoft Word and then added a background envelope PDF in Acrobat. In December, a file of about 2700 pages was only a few megabytes. Today I did a file of only 1705 value of pages of addresses, add a background of similar size envelope and the file it's almost a terabyte! What is going on?

  After you apply the background try to use the Save As method and re-save the

  file under a new name.

  Who should do the same resources (such as the background image)

  consolidated and may reduce the file size by a draw draw.

• Disable the text with the selection query list element?

  4.2.1

  THM:2

  Hi all

  In the full text with Auto item, is the query preloaded when the page loads? Or is it run only when the user enters any text? Reason being that on the follow-up to our application apex because of a performance issue, it was noted that the query associated with the AutoComplete text box was running 3 times, (it has been referred to in 3 places on the same page in a sql report. We feel that the sql would be only when someone starts to enter a value in the field? If this isn't the case, we can disable to run when the page loads?

  In addition, if the text with Auto C is used in the where clause of a sql report, would it be internally run the underlying sql query? Should he treats not only as a text element?

  Thank you

  Ryan

  Hi Ryan,

  Please see the concept of lazy loading of AutoComplete.

  http://blog.whitehorses.nl/2010/02/25/Oracle-Apex-4-0-text-field-with-AutoComplete/

  -Sunil Bhatia

• addition of html in the box edge animate the text of the external js file

  I have a text field in the anime that I want to update with a score of edge. The function that allows you to click and update the partition is in an enternal file so I'll try to figure out how to get my div animated dashboard replaced by jquery in the external file. That's what I have so far in the external js, but it is not reading the field to animate the text of edge correctly:

  external .js file:

  AdobeEdge.coinCounter += 250; It called the coinCounter variable introduced in edgeActions.js and the initial value of 0 updates
  Alert (AdobeEdge.coinCounter); This shows that it works and updated correctly
  
  var comp = AdobeEdge.getComposition ("EDGE-172492634");

  var point = comp.getStage ();

  stage.sym.$("gameText").html (AdobeEdge.coinCounter); It's when things go wrong. I want this updated value in the text box named 'gameText' which is in the composition of edgeAnimate

  stage.sym.$("gameText").html ("NewText"); There is no indication in the text box 'gameText. " something must be wrong how am I referencing outside edgeActions in the external .js file

  Did someone mind helping me to refer to the text box 'gameText"correctly so I can enter my new value? Thank you!!

  Hello

  You must remove "sym.": internship. $("gameText").

• Addition of the new Image and text to an existing Page created with Tables

  Work in DW 5.5

  I try to add a new image/link and a small amount of text to an existing web page that was created with tables and centered.  I use AP div tags. One for the image and one for the text.  Everything works fine, but I can't get the new anchor points and to re - center with the rest of the page.  I'm not able to get around the "absolute positioning".  I tried different solutions of various tutorials but I can't make them work with tables.

  Added items are a Facebook button and text.

  Go to: http://www.sugarhollowfarms.NET/index.html See the problem.

  Help, please. I'm not that experienced.

  First, make a back up of the page before you implement the changes below!

  Take the bit of code below to

  ...... to..........

  and insert it directly after the opening tag div FWTableContainer and before your opening table tag (see location below):

  ">

  Join us
  

  on Facebook

  Then add - position: relative; -to the css of FWTableContainer (as shown below):

  {#FWTableContainer209091602}

  / * The div master to make sure that our contextual menus get properly aligned.  Be careful when you play with this one. */

  position: relative;

  margin: auto;

  Width: 800px;

  height: 600px;

  text-align: left;

  top: 20px;

  background-image: url(images/homepage_new3.jpg);

  border: medium solid #336600;

  position: relative;

  }

  Edit the css for FBlogo to as below:

  {#FBlogo}

  position: absolute;

  left: 700px;

  top: 380px;

  Width: 91px;

  z-index: 1;

  text-align: center;

  }

  Edit the css for bodytext as below:

  {.bodytext}

  do-family: Verdana, Arial, Helvetica, without serif.

  do-size: 11px;

  line-height: 13px;

  margin: 0;

  padding: 0;

  }

• addition of transport refers to a member or the text string variable

  I would like to structure a variable text line 1 at a time and then put this text in the text member and ultimately in an external text file but get a 'bad type' error when I use the script below. I guess I can't refer to the line in the sub-provincial text until they are there, but how can I add the?
  
  also how can I get to pick the text in this member of text in an external file... or better yet, how to take the text of the text variable in an external text file?

  There seems to be no 'next' code

  The constant RETURN can be appendd to the text to insert a new line

  myString = "this is a line" & return & "second line".

  Member ("textDisplay"). Text = myString - he would put in a text member

  Included with the Director fileIO xtra is the standard for writing in a
  text file, the simplest form would take about 5 lines of code to get
  to write to a text file.

  -Here is an approximate example

  myFile = new (xtra "fileio")
  openFile (myFile, myPath, 0)-read/write access
  writeString (myFile, myString)
  closeFile(f) (myFile)
  myFile = empty - purge xtra instance, also directed by Manager ending

• How to specify a form to fill out the field round the text and aligned to bottom

  I have a few form fields that may have contained long, but have an introductory text. I would like that the entered content to wrap around this text, as shown in the image below:

  

  The content is updated automatically, not entered by someone, so what allows Rich Text and defining the formatting in the input block are not an option. I see two possibilities for this:

  1. A unique field that has a hanging indent on the first line that's enough to avoid the introductory text;
  2. Two separate fields configured so that the text overflows from one to the other.

  I was not able to understand how to do either of those. In this case, I see the additional ability to adjust the left edge of a multiline field for being to the right of the introductory text, but I have other scenarios where this text is well more than half of the line, in this case the solution is not feasible.

  I also need to have the text in a multi-line field position on the bottom line and that more text is added, the current text moves upward and the overflow fills below, remain bottom line:

  but

  If anyone has a solution or any of these problems, or another thought, I would be very happy to hear about them.

  Thank you

  Dan

  As you found, there is no possible negative indent and substantive alignment is available with fields that allow rich text formatting. A new conception of form layout that works with the limits of the text fields is how I would approach it, but I know that's not always possible.

• How can I change the text toolbar icons? How can I add 'Reload', 'New tab' and other elements not no projection in "Customize"?

  See above. I 'refresh firefox' and lost my previous toolbars, that were in the text, not icons.

  You can watch the extension Classic theme restaurant owner to customize the appearance of Firefox 29 and later and make it look like older versions of Firefox.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
  • You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.
  • You can find additional toolbar buttons and additional toolbar settings in customize (Firefox 3-bar menu button > customize)

• Thunderbird displays only the text in the messages received or sent, even if the options are set for the HTML pages.

  Using Thunderbird 25.6.0, running on W7 - 64-bit.
  Have used the T-bird constantly since it was morph'ed from Netscape Communicator, so feel I understand basis, including the specification HTML or text/HTML options.

  A user Windows, Thunderbird account works perfectly, for the second user of Windows, all Thunderbird email accounts (4-a profile of T-bird) suddenly transformed to send and receive all messages in text only.

  I regularly compose messages in HTML format, using the wide range of fonts, colors, embedded graphics. The compositions remain intact (HTML) until the moment where I send them. The copy in my "sent" folder is in the text; one of the graphics incorporated in my original will be attached, and all the others will be gone. If my recipient respond or forward the message to me, all of my original material is text, as well as all my recipient adds to his response.

  In addition, all original incoming messages of my correspondents are in simple text. Not a sign of HTML anywhere unless I have to compose a message, or a message saved in my drafts folder.

  What is the problem and how can I solve this problem?

  Dean Jones

  NO, I ask a question. I was NOT choosing my question as a solution to my question.

  Usually, when I start new topics, I am taken in part because it's something twice 6 months ago.

  I have no solution. I have a problem. I'll start a new topic

• I have a weird problem: the characters used by Firefox to render the text of the interface itself (menus, menus, bookmarks, boxes pop up, etc.) were replaced by weird little boxes with numbers.

  In addition, the text of the web page that is responsible has changed in a weird font that I, that I recognize as Desdemona.

  This problem disappears in Mode without failure, but even after reset all my settings (by disabling all extensions, etc.) I have the same problem as soon as I open the application.

  I tried to reinstall and even the installation of several versions of the software, but nothing has worked. This problem happened after a system crash, but everything else - other applications, system services, etc. have been retrieved and work perfectly again.

  (I have the same problem loading Thunderbird 5).

  Try to turn some prefs Boolean gfx.font_rendering on the topic: configuration page to disable certain features and maybe gfx.direct2d.disabled-> true to disable Direct2D.
  
  Filter: gfx

  gfx.font_rendering.directwrite.use_gdi_table_loading
  

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• using 3.1 the text line/window - change of placement?

  I'm getting used to 3.1 number compared to numbers 1.0.3, which I have worked for years. Why most upgrades of Apple want to damage?

  In the earlier version, as you type in a cell, what you type appears in a sort of window/line of text just above your worksheet. A great advantage in that, in addition to visibility, is that you have the choice of your data of the edition cell by typing either in the cell or in the window/line of text. My databases are more text than the numbers; the enormous advantage of the text window is you do not need mouse around the actual cell to add or change, and you can see the content on a single line.

  In point 3.1, the same "window" appears, but it's at the bottom of the worksheet. This course, it is much less visible, and there doesn't seem to be changed somehow. This forces you to work every bit of change within the cell.

  Issues related to the:

  1 can you change the placement of this window of text to point 3.1, so that it is at the top?

  2. is there a way to add or modify data without work inside the cell? I can't believe that apple gave to the functionality of this editing window. But then again, it was an 'upgrade '.

  Thank you!

  (1) NO.

  (2) NO.

  Motivation of apples was more likely to make the numbers on Mac OS X and numbers on iOS have a common interface.  I'm not justify whatever it is just assuming that.  That said, you can post your comments to Apple using the menu item "numbers > provide Feedback numbers" AND you can use the 2.x version number (unless you have uninstalled it).

  Numbers of 2.x is located in the folder "/ Applications/iWork ' 09.

• need to fix the size of the text

  Text size problem.  My cat ran across the keyboard and press a button that caused the text to shrink size.  I tried to fix it through the display settings, but it does not work.  Is there a key that I can hit to the size big enough to read?

  Hello

  If you are referring to the size of the text in a Web browser, you can use the following commands.

  Press and hold Ctrl and press 0 (zero) to return to the default page size.

  In addition, you can also adjust the size of the page:

  Hold down the CTRL key and press - to reduce the size of the page.

  Hold down the CTRL key and press + to increase the size of page

  Kind regards

  DP - K