Subtitles do not appear when I play my video exported with first Pro CC

So, I've spent some time cela, but can't seem to get anywhere.  I'm relatively new to Premiere Pro and I created a sequence with captioning.  I tried to export several different ways (Quicktime, H264, etc.).  I was also careful to include a subtitling sidecar file or to incorporate subtitles into the video when you export using Quicktime.  I was also sure that the two files (the film and the SCC file) are in the same place.  I tried different versions of the video exported using Quicktime Player and VLC, but had no chance to get the subtitles to appear.  In Quicktime player I've tried it with active captioning, but this does not seem to make a difference.  In VLC, I tried the Advanced Open option which allows you to select the subtitle file, that you want to load with the film.  Once again, no luck.  I tried to drag / drop the file *. CSC on the movie then it plays.  I tried to select a subtitle track using the drop down below the video.  Once again, no luck.  I tried exporting the file as a .mcc of Premiere Pro and that no longer works.  I even tried to convert the file *. CSC to .srt app file online.

In any case, I'm stumped.  All I want to do is get my film to play with subtitles with a simple application.  Any help would be appreciated.  Thank you.

S. @@

Sorry, Fritz. It's been a while since I really look to the help page of captioning, and I just assumed that the workflow new legend is covered here. And a second apology because the State of this page is at least partly my fault insofar as I promised our technical editor months ago that I would expand this page.

You don't do something wrong when it comes to set the start and end for legend blocks. In the timeline panel, legend titles are basically only display. The apparent handles are really just indicators; they are not interactive. I think it's our road map to make them interactive, but I have no idea wherever improvement is in the order of precedence.

I'm not sure what you mean about "each caption track block [being] limited to a little more than 30 seconds. If there is a maximum of a clip of the legend, it is probably 12 or 24 hours. I have worked with many that are more than an hour. With respect to the individual legend within clip blocks, my memory has grown blurred in the months since I worked on the feature, but I think that the program does not impose a limit on the duration, you can give a block. However, there may be a limit on how long a given legend block will be actually are displayed. I thought the limit was 15 seconds, but I just did a test with blocks of 10, 20 and 40 seconds, and each of them had completely given duration in the encoded output. Maybe the limit that I think is a specific standard... Come Monday, I'll have to check with colleagues who remained close to all of the features.

Note that if you add a caption element in a sequence until you have finished adding blocks, then you will need to cut the clip after increasing its duration by adding blocks.

Finally, although the first creation of the legends from scratch media feature set was designed mainly to import captions created in a tool of creation of third party and, if necessary, revise the content and control the synchronization.

Tags: Premiere

Similar Questions

  • Previously purchased songs do not appear when you add a whole album with music subscription

    Hello

    What is happening with a few albums in my music library: I already bought only songs from these albums, then after the signing of Apple's music, I added the entire albums to my library. However, the songs already purchased are now missing.

    When I search on the Apple's music album, it shows that all the songs on the album is available in offline mode on my device, except the already purchased song. If I type '+' at the top of the page or by clicking on «...» ' then '+' next to the missing song, I see the notification '✓My Music' and the '+' appears instead of the download symbol, and no changes are made to my library.

    Any help is appreciated!

    Nevernimd, after some research, I found that these purchases can be "visible" from iTunes.

  • Preview the video in Adobe first Pro CC stutters badly all playing on a portable powerful

    I bought 4 months ago relatively powerful computer laptop specially for my needs of video editing with first Pro CC, but so far it has been very frustrating experience.

    Lenovo Y40-80

    Intel i7-5500U

    16 GB OF RAM

    SSD 512 GB

    AMD Radeon R9 M275 4 GB

    Screen LCD 1920 x 1080

    Play timeline (4K clips without any effect applied) in the window saccade preview so bad that it is almost impossible to use the software. Reading is relatively smooth 3-5 seconds and after that it significantly slows down to 2-3 frames per second (the other images are deleted).

    I tried all the latest AMD Catalyst, including the version beta drivers. Complained about the AMD forum. Reduces the resolution of reading from 1/2 to 1/8 with no visible effect. In fact even the discreet GPU through the BIOS turn off have not declined over the playback speed. Passage of the first CC (2014) to CC (2015) doesn't change anything either.

    Interestingly enough, feature as 4K quality export works well enough, with a speed comparable to my office for 4 years. The office manages very well the process of edition, and based on the specifications of the laptop must have about the same performance as the office.

    Suggestions, please?

    your cpu is one of the scam i7 from intel. It is a core 2 and not 4 core performance is cut in half compared to the 4 core i7 about the same price. for comparison, your cpu is the same speed as an office i3 cpu. You can try to sell the lenovo and get an i7 core 4 with a gtx 970 m or 980 m.

  • Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

    Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

    Hello
    Try this:
    http://support.Microsoft.com/kb/306318
    b Eddie

  • How can I know if private browsing works? The purple mask does not appear when I click on the mask icon. In my privacy settings "never remember" is selected.

    I'm trying to confirm private browsing works. At the moment, I have no way of knowing whether or not it is enabled. The purple mask, referred to in the help does not appear when selected. I should say in my privacy settings, I have never chosen "remember", for the story.

    Hi willpublx, when you have selected never "remember history" in the privacy options so you are actually in 'permanent private browsing mode' and that there will be an extra mask icon to indicate that.

  • Open with does not appear when I click on a URL in Firefox on my desktop

    Click right 'open with' does not appear when I click on a URL in Firefox on my desktop. The codec-c no longer works with 9 update of Firefox, so I would like to open with Internet Explorer instead until the Codec-C is compatible with Firefox again.

    Add - ons:

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • How can I remove bookmarks not in folders that do not appear when I click on "show all bookmarks"?

    All my favorites that are important are in folders and fines. But when I click the menu bookmarks, folders are followed by a list of unwanted bookmarks. These do not appear when I go to "show all bookmarks". Here, the "unsorted bookmarks" folder is empty.
    I can delete the bookmarks side one at a time, but it will take ages!
    Please can you advise me?
    Thank you.

    Are not the Favorites in the Menu of bookmarks folder?

    One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

    original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

    I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
     
    Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
    Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
    Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
     
    I have an ADSL broadband, with a Linksys EtherFast PCI card.
     
    Then I got SP3, which installed without any problems.
    So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
     
    Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
     
    After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
     
    My update setting is to let windows download ('important') updates, but let me choose when to install them.
     
     
     
    What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
     
    I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

    Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

    Comment 2: If you will not contact the MS Support on this issue?

    ~~~~~~~~~~~~~~~~~~~~~~~~~~

    Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

    Repost...

    1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

    2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

    3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

    ... I guess that clearing the browser cache does not erase 'downloaded' updates.

    Nope. If you want to clear the queue of the update...

    OPTION A:

    1. stop the automatic updates service:

    Start > run > (type or copy/paste) services.msc > click OK
    Double-click automatic updates > click stop
    (Stopping the service will take a moment)

    2 remove the contents of the download folder:

    Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK

    Open the download folder and delete its content
    Close the window.

    3. start the automatic updates service:

    Start > run > (type or copy/paste) services.msc > click OK
    Double-click automatic updates > click Start
    (Starting the service will take a moment)

    OPTION B:

    1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

    2. make disappear/close the Troubleshooter automatically pop up.

    3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

    4 reboot.

    Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

    Check the located log file...

    C:\Windows\Debug\ MRT. NEWSPAPER <>

    Related...

    ... This leaves us with the malicious software removal tool don't appear not.

    I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

    It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

    ================================================================
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

  • Found the names not allowed on my contacts Hotmail list and cannot remove them (they do NOT appear when I look at 'Contacts')

    Found not authorized names on my Hotmail Contact list and cannot remove them (they do NOT appear when I look at 'Contacts'), but are present if I send a new email by clicking on the button 'A' and selecting 'all '. Any suggestions on how to remove the unauthorized names?

    Submit all Hotmail queries on the forum right here:

    Windows Live Solution Center
    http://windowslivehelp.com/

  • Status window component-fax fax Windows does not appear when sending or receiving

    I can send and receive faxes using Microsoft fax in windows component, but fax status window does not appear when sending or receiving.  How can I fix?

    Assuming that long ago, that you have installed Service Pack 1 for Windows XP, your problem may be a badly configured third-party firewall.  See http://service1.symantec.com/SUPPORT/nip.nsf/4a29389c214c78ea88256c75005f451a/713afacbd4135e0a88256c77007e526f?OpenDocument

    Also take a look in the event viewer (start > run > eventvwr > OK) for errors or warnings related to the fax system.  If you find one, double-click on it to open the event properties, and click on 2 pages below the up/down arrow icon to copy the events to the Clipboard.  Then paste it in your response.

  • I'm trying to map a network drive. I created the target folder on the shared computer, but the folder does not appear when I try to map?

    I have a network machine, 4 machines and a fifth small office which acts as a server.  I created a folder target on the server.  Then, I try to map a drive on one of the four other machines that have access to this folder target on the server.  However, the target folder will not appear when I go to the other machine card.

    Hey Dano,

    Your question is more complex that most seem to be on the answers. I suggest that you re-post on our TechNetforums where computer professionals can help you.

    http://social.technet.Microsoft.com/forums/en-us/categories/

    I hope this helps.

  • HP 1000 1408AU: painted does not appear when the value.

    Hello

    My origins do not appear when I put them.

    Product name: HP 1000 1408AU

    I have a picture on my desk I would like to be and as my image background and when I right click and select "Set as background image" it does not appear, the background just stays empty. However, when I type the symbol windows on the keyboard (which takes us to the tiles) tile Office has my background image I selected. But when I click on the tile of office he does not come to the top.

    This problem occurred for at least 3 months.

    Also when I go into the control panel and then under the label "Appearance and personalization", there is "change destop background." When I click on this button and select my image, then click on save changes, it does not appear.

    Also under the same label "Appearance and personalization", when I click on the button "Edit theme", he says the image I selected is set on my screen, but it is not. The background on my desk is always empty. (Black Madonna).

    Could someone help me with this problem please?

    Thank you.

    P.s when explaining how to fix it please give simple directions front right for example click this and then he...

    Thanks again.

    Here's what looks like my background (even when an image is defined)

    Hi Russell

    Welcome to the Forums of HP Support!

    See if this tutorial helps you:
    http://www.eightforums.com/tutorials/29777-background-show-image-solid-color-Windows-8-8-1-a.html

    Concerning

    Visruth

  • the Task Manager does not appear when right-clicking on the taskbar

    The Task Manager does not appear when right-clicking on the taskbar

    Hello

    It appears when you press ctrl + shift + ESC? It seemed before? You are an administrator on this computer or is it a corporate system?

    If he has suddenly ceased to be available, it's a good sign that you have picked up a virus or some kind of malware. Formal analysis in safe mode is your first line of defense.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • Letters do not appear when you type on a web browser

    I have no problem typing in MS Word 2007, but when it comes to the internet, typing in a web browser, there not all letters as I type. A slow response to the keyboard.

    Hello

    Thanks for posting your query on the Microsoft Communities

    I understand that some of the letters does not appear when you try to type on the web browser. Let me try and help you with the problem.

    1. what web browser do you use?

    2. have you tested the issue on several web browsers (if you have them)?

    3. have you started facing this problem recently? If Yes, are you aware or made a software or a hardware changes to the PC before this problem?

    This occurs generally if there is a problem with an add-on installed on the computer.

    I suggest to follow these methods on Internet Explorer and check to see if it helps to solve the problem:

    Method 1:

    You can start by running the Fixit and check if this helps solve the problem.

    Troubleshoot Internet Explorer to IE quick, safe and stable

    http://Support2.Microsoft.com/mats/ie_performance_and_safety


    Method 2:

    If this does not help, start Internet Explorer in no add-on mode.

    While Add-ons can enhance your online experience, they can sometimes interfere or conflict with other software on your computer. Try to start Internet Explorer without Add-ons to see if the problem goes away.

    Step 1: Run Internet Explorer without modules

    ·         Click the Start button. Click on all programs, Accessories, click System Toolsand then click Internet Explorer (No Add-ons).

    If the problem does not occur after you use this method, use Manage Add-ons to determine which modules are at the origin of the problem.

    Step 2: Manage Add-ons.

    (a) open Internet Explorer, click the Start button. In the search box, and then type Internet Explorerin the list of results, click on Internet Explorer.

    (b) click the Tools button, and then click Manage Add-ons.

    (c) click an add-on in the name list, and then click disable.

    (d) repeat step c until you identify the add-on that is causing the problem.

    See the article: http://windows.microsoft.com/en-us/windows7/Internet-Explorer-add-ons-frequently-asked-questions

    Let us know if it helps. If the problem persists, we will be happy to help you.

  • My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

    My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

    Belkin support for your model, for installation instructions.

    Your router will not appear in the devices

Maybe you are looking for

  • How to get mail?

    Not receiving mail manually or automatically does not receive mail... Guard spinning circle...

  • Can't pair BT keyboard after battery replacement!

    Summer using only the keyboard for more than a year without a single question. Or I just replace battery, it won't match more. Ridiculous! View of BT devices for half the price with never affected by one question! "Try the pairing was unsuccessful" I

  • the Apple tv clock format

    Please can someone advise if the US apple TV 4th generation display time format in 12 or 24 hours?  And is it possible to change this in the settings? Thank you

  • Continuously monitor changes to a string value.

    Hello world I am looking for a solution to this issue. More info: I have a dialogue-type VI with only a text field, which is a string. The user needs to analyze a Data-Matrix Code from a device in the chain. The scanner itself works as if the user ha

  • Is XP Antispyware 2012 a Microsoft product?

    question