Subvi output displayed dynamically on XY graph

Similar Questions

• A generated within a loop in a subvi output data can be transferred to the main program for each iteration of the loop?

  Hi LV users,.

  I have a very basic question, I have not succeeded to asnwer using basic considerations.

  I made a sub - vi that performs a scan of current-voltage using a unit of measurement-source Keithley and a loop FOR.

  The subvi outputs 2 tables with my data (essentially an array of voltage and the corresponding current table). I also defined a Terminal at the exit of a group of these 2 tables in order to plot a graph XY - output. Specifically, I indexed this cluster to update after each iteration of the loop FOR, in my sub - vi (the indicator is placed outside the loop, of course).

  My problem is that I want my main program to display the XY-graph in real time, with an update after each iteration of the loop FOR which is in my sub - vi.

  I have a problem because my sub - vi output terminals are available for the main program concluded as soon as the sub - vi has completed its own execution (which is what we expect of sub - vi to do).

  How can I use a sub - vi (because it's handy) and get in the main program in the course of its performance data that are generated from the loops of sub - vi?

  Thanks in advance for your help,

  Yoyo87

  Elements of the queue in the Subvi them put your main VI where you want to display the data and the.

  It is similar to the architecture of producer/consumer. There are examples of it in LabVIEW. The examples work with 2 parallel loops, in your case a loop (the producer) will be in the Subvi.

• How to make the table display dynamically in jquery mobile

  Hello

  can you please tell me how to do table display dynamically in jquery mobile. ?

  Please give a few example

  Hi Q3test,

  Check this link below
  http://hippieitgeek.blogspot.se/2013/01/creating-dynamic-tables-with-jQuery.html

  Hope this will help you.

• WMP cannot play the dvd because it is not able to activate the analog copy on the output display protection.

  using windows 7 in my HP Pavilion a1110n desktop and cd plays end. When I put a dvd, it won't play. The reason he gives is that "it is not possible to activate the analog copy on the output display protection." He also told me to try the update driver for the video card. I went into the menu devices and he had to manually update the graphics card - but it just says that the more recent driver already installed! What makes things worse is that I can't just walk out of the old graphics card because it is integrated in the motherboard! Please, any ideas?

  using windows 7 in my HP Pavilion a1110n desktop and cd plays end. When I put a dvd, it won't play. The reason he gives is that "it is not possible to activate the analog copy on the output display protection." He also told me to try the update driver for the video card. I went into the menu devices and he had to manually update the graphics card - but it just says that the more recent driver already installed! What makes things worse is that I can't just walk out of the old graphics card because it is integrated in the motherboard! Please, any ideas?

  =======================================
  The following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

  And... the free VLC Media Player may be useful to
  a trial... it will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

• I get this message when you try to play a dvd - Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection.

  I bought a DVD called "The Secret" and I can't play.

  And I get this message
  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection. Try to install a driver available for your video card.

  Hello

  Thanks for asking!

  1. have there been recent changes to the system before the show?

  2 is confined to a specific DVD?

  3. What is the file format of the DVD?

  Method 1:

  Follow the link and follow the steps. Check if it helps.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection

  http://support.Microsoft.com/kb/2004673

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

  Method 2:

  Follow the link and update drivers display, check if it helps.

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Answer with the results, I'd be happy to help you best.

• Options output/display the display log are redirecting to browser automatically in Oracle 11i applications

  Hello

  Can someone let me know the what is the option to change the popup options in oracle applications 11i.

  My requirement is when I click on the options output/display the journal should it appear he himself, rather than redirect to the browser.

  Version of the application is: 11.5.10.2

  Thank you

  Govind

  Hello

  Clear the value of the following profile option:

  Viewer: text

  Kind regards

  Bashar

• Is it possible output display of list of items in web app using two categories?

  Help, please! Is it possible output display of list of items in web app using two categories? For example, I want to list all the items web app 32098 marked with categories 189076 AND 190266, excluding items that have been marked with one of these categories. Site is not currently liquid activated, but I could enable, if necessary. Any suggestion would be appreciated.

  I highly recommend the App search Web use if you ever want to search by multiple fields.

  I recommend against the use of categories. Avoid as much as possible, categorization items if you can. Try to work on your web applications around the areas of web application development and web app datasource, if you can.

  This allows you to easily filter a web application defined by one or more fields with precision and fast!

  Here is an example of a site using web app search find a floor - Tauranga carpets and floor coverings

  Here's another example of site Web too: our range of rolls of carpet

  However, if you insist and require the use of categorize, I know to categorize, you can have 1-to-many relationships, so I think that Robert Bell said that it the best, you can simply filter web app items from several categories. Even if using liquid - by the way, as output of fluid tell you not what the element is qualified.

  My recommendation is to rethink your application web, if possible, do not use categories.

  Hope this helps,

  Stephen

• Have the value displayed on the bar graph output

  I use the OBIEE 11.1.1.3. I have a question about the display of the values in the chart. Currently, if I create a bar horizontonal chart the values for each of the bars are only visible if I hover above the bar. Is there a way to display the actual value on the bar or another method to display this value without having to go.
  
  What I want is something like this:
  
  [http://blog.fusioncharts.com/wp-content/uploads/2011/03/column-chart-with-data-values.jpg]

  GoTo General properties of table-> nameplate-> show data labels and select 'Always' from the menu drop down.
  What shud solve your problem

• Overhead of the graphic use of Wfm as a Subvi output terminal?

  -My basic question:
  If the front is closed, is there a difference between a graph of Wfm and Wfm indicator as output terminal?

  -The question in context:
  I have a no reentrante Subvi, which will take place in my program and an output waveform.  Sometimes, I want to open the front of the Subvi and adjust its internal settings displaying its output on a graph of Wfm.

  The minimum solution would appear to make the graph of Wfm of the Subvi double panel as the output terminal, as opposed to the output through an indicator of Wfm.  But who would increase the resources used during normal operation of the Subvi?

  Thanks in advance and have a nice day.

  -Brad

  There should be no overhead. The chart would update only if the front is open. Most of the time, there are not yet signs before the subVIs in memory.

  Mike...

• Output display on TV LED to DisplayPort on zbook 15

  Hello

  I have a portable zbook 15 product D5H42AV.

  On this laptop, I have a DisplayPort output and Thunderbolt.

  I bought on the market (not HP) DisplayPort adapter to HDMI.

  I can't get the result displayed on my TV (full HD) LED.

  If the adapter supports only DisplayPort 1.1 and 1.2 not?

  I want to see the screen on TV, I'll use a DisplayPort adapter or an adapter Thunderbolt?

  Is it possible to troubleshoot why can I not print output to the TV from my laptop?

  I solved the problem. The adapter was working fine.

  The problem was a faulty HDMI cable. I'm trying to connect my DVD player to the TV with the same cable and I realized that the cable did not work. It was something I wasn't expecting.

  I replaced the cable and everthing very well now.

  Kind regards.

  Alberto

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• display constantly accumulating waveform graph

  I read about 1000 points per iteration that I want to show a waveform graph. If I am just a digital picture in table of waveform, it shows a smooth wave sin and it looks at is just by adding new data to the former (a bit like a queue).

  However, if I use a waveform, it replaces the previous data with a new one. I want to see 2 seconds of data at any given time, so just display 1000 points on a corner does not help.

  I tried to join a waveform using the shift register and it shows the result that I want, but overtime, the size of the waveform gets very large and it slows down the system. I could implement a check of size and other things, but it's there

  an easier way to do the input waveform behave a digital table entry?

  I need to use waveforms because I want to stack several locations a TI provides an 'insufficient memory' picture if I use a 2D array.

  Got, it works. Had to change the timestamp on each iteration.

• How to display dynamic menu with the parent and the child using c# and sql server

  Hello

  Can you tell me

  What is menu given Dynamics example

  How can u use my dynamic menu added project in c#

  This menu is display with only the data from sql database.

  Menu with the help of a parent node and a child.

  check the element all in sql server and adding one by a dynamic menu.

  Hello

  Thank you for writing to Microsoft Communities.

  I recommend you post your query in the following forum.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

  Hope this information is useful.

• The dvd on the s-video output display problem

  I think I am doing something stupid, but I can't understand it.  I used my T40p for many years, inclunding using the vga external display monitors and digital projectors player.  For the first time, I wanted to use it to view DVDs on a TV using the s-video output capacity.

  I activated the s-video and connected to the tv without problem.  My office is correctly displayed on the TV.  However, when I use the dvd playback software to show a dvd, the tv does not display the content.  The content of the dvd shows correctly on the computer screen, but not on the TV screen.  If I use the view "full screen", nothing shows up on the TV.  If I show only the dvd in a window, then everything on the desktop is shown properly on tv, except the dvd window is blank.  Yet once, it appears correctly on the computer screen.

  I have tried various software to media, including intervideo WINDVD and Classic Media Player player.  I tried PAL and NTSC discs.  No difference.

  I think I'm missing something obvious.  Any ideas appreciated.

  T40p 2373-G3U, 1600 MHz, 1 GB RAM, WinXPP SP2.

  1400 x 1050 with ATI Mobility Fire GL 9000 LCD display adapter display.

  OK, I solved this problem myself.  The solution is to use a configuration that uses ONLY the external display.  Apparently if you enable the output s-video, but do not turn OFF the LCD screen, the video card only then produces the dvd on the LCD, not s-video content.

  There are two ways to select the s-video output only.  Go to settings-> control panel-> thinkpad configuration.  In the window of thinkpad configuration, at the top left, there are five buttons to activate different display configurations.  One of them is "tv only".  If you click this button, the LCD of the computer stops, and the s-video output became active.  Showing a dvd in this configuration using intervideo WinDVD or other programs video display shows the contents of the dvd to the TV via the s-video output screen.

  The other way is to implement a model of custom view using the Director of 'presentation', which is accessible from the 'thinkpad configuration' window described above.  It is available under the "view" dropdown  I created a custom method called 'dvd' that automatically sets the external screen in 640 X 480 resolution.  This is consistent with my standard TV ntsc resolution and avoids the need to change the display resolution before you activate the s-video output.  I choose this plan using the key FnF7 is quick and easy.

  Hope this is interesting to someone out there.