Suggestion: Add option to Soap envelopes to separate the dump file

Similar Questions

• Export Illustrator layers to separate the Illustrator files?

  Does anyone know in AI CS4 how to export layers to separate the .ai files? Or third-party plug-ins to do the same thing? Preference, retaining the name of the layer to the new file name.

  I have a file .ai laminates with 40 layers of versions of logo that I need to export separate files and I would avoid the obvious "save under" and delete layers road.

  Thanks in advance.

  Try this. Cut and paste into a text editor and save it in a text file with the .jsx extension. You can either place them in your AICS4 > Presets > Scripts folder and restart AI or run all from file > Scripts > other Scripts.

  Beginning

  var doc = app.activeDocument;
     
  If (documents.length > 0) {}
         
  Create the illusrtratorSaveOptions object to set options to HAVE
  var saveOpts = new IllustratorSaveOptions();
     
  Definition of the IllustratorSaveOptions properties.
  saveOpts.embedLinkedFiles = true;
  saveOpts.fontSubsetThreshold = 0.0
  saveOpts.pdfCompatible = true

  If (doc.saved == false) doc.save ();
         
  for (i = 0; i
  If (doc.layers [i] .locked == false) doc.layers [i] .visible = false;
  fullDocName = doc.fullName;
  var param = doc.name.split('.');
  realDocName = param [0];
  for (i = 0; i
  If (i - 1<0) doc.layers[i].visible="">
  else {}
  doc. Layers [i - 1] .visible = false;
  doc. Layers [i]. Visible = true;
  }
  If (doc.layers [i] .locked == false) {}
  docName = realDocName + doc.layers [i] .name + ".ai";
  var saveName = new queue (doc.path + "/" + Nomdoc);
  doc.saveAs (saveName, saveOpts);
  }
  }
  doc. Close (SaveOptions.DONOTSAVECHANGES);
  doc = null;
  App.Open (fullDocName);
  }

  End

• How to separate the Raw files of the photo library

  My photo library is over 700 GB. I have a lot of raw files that are 30 MB or more. How can we separate the raw files in a separate file or a separate library?

  Duplicate your photos library in the Finder and then remove all the BULLIES of the first library photos and all photos that are not the RAW files of the second library.

  You can search for RAW photos with a smart album:

  File > new Smart Album

  Then set the rule set to "picture is GROSS."

  Of the other library use the rule 'The Photo is not BELIEVED'.

• Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

  Any ideas how can I insert a pdf into word, by using the option object to insert. However, the pdf file that I want to insert text and annotated lines, but once inserted comments do not appear?  any help would be greatly appreciated.

  You will need to find a forum for MS Word, since it is the software you are trying to manipulate in the present.  If you think that the treatment/creation of the PDF file plays a role, then you should ask in the forum for the software that you use to create the PDF file.

  This forum is for a question about downloading and installing Adobe products test, so in all circumstances, your question does not fit in this forum.

• Error when you try to add a song to Windows Movie Maker: the selected file is not valid or is corrupted.

  Sometimes, when I add a song to Windows Movie Maker it does not work.

  When I try to add one of my songs, it is said: C:\Documents and Settings\Utilisateur\Mes documents\Ma Musique\iTunes\iTunes Media\Music\Craig Smart\I Miss You - Craig Smart.mp3 could not be imported. The selected file is not valid or is corrupted.

  Help, please

  When I try to add one of my songs, it is said: C:\Documents and Settings\Utilisateur\Mes documents\Ma Musique\iTunes\iTunes Media\Music\Craig Smart\I Miss You - Craig Smart.mp3 could not be imported. The selected file is not valid or is corrupted.

  Help, please

  2 responses on itunes and Windows Media Player (WMP) are:

  1.

  RE: iTunes and WMP - MusicBridge
  
  Found this on the web. I can't vouch for it. Use it at your own risk.

  Excerpt:
  iTunes is not compatible with Windows Media Player. iTunes is - like Apple-very protective of any product and does not like to share. So, you have to force off iTunes and WMP.

  To do this, you can use this sloppy program: MusicBridge.
  The description of its creator:
  MusicBridge allows people who use both iTunes and WMP on the same machine to keep their libraries in sync. MusicBridge offers a variety of synchronization options so that you can manage your collection of music in the media player, or both. MusicBridge duplicates of meta-data between Windows Media Player and iTunes, it does not copy the physical files between applications.

  Version 2.0.1 is a bug fixing release.

  Best thing: it's free.
  http://download.CNET.com/MusicBridge/3000-2141_4-10530687.HTML?tag=mncol;psum

  2.

  courtesy of musiclover101:
  

   http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff

  convert the songs in your iTunes library to a format that Windows Media Player can understand

  You can convert the songs in your iTunes library to a format of Windows Media Player can understand - (I tend to use mp3). This can be done inside of iTunes itself. If the songs in your iTunes library were purchased in the iStore and were purchased in the plus version (indicated by a small sign above the price of a song +), then they are DRM free, so they can be converted easily. However, if the songs were not purchased in the format more, you can convert them for 30 cents each. I highly recommend that you do as the plus version of songs are premium quality - and since they are DRM free, you can use them in almost all applications and you can burn them to CD and play almost anywhere. All the songs on the iTunes store are now version more, so you don't have to worry about searching for them in the future.
  To convert songs to Windows Media Player can understand, open iTunes, and then do the following:
  1. click Edit, preferences, and go to the general tab
  2. click on the button "import settings".
  3. change the "import using" at "MP3 encoder".
  4. click OK and go back to your music library
  5. choose the list view and select the first piece of your library
  6. scroll all the way to the last song in your library
  7. press the button SHIFT key, then click the last song to select all the songs in your library
  8. click on "Advanced" and then "Create MP3 Version."
  9. your songs should start to convert and according to how many songs do you have in your library, this could take some time
  10. open Windows Media Player and press F3 or click file, add it to the library
  
  11. click on OK - Windows Media Player should start to search for songs on your computer and after that he finished the search, you should find the songs in your library in your Windows Media Player to iTunes library.

  NOTE: This method will not work unless you have purchased iTunes songs or if you have converted the songs iTunes more for each 30 c

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to add multiple images to a JLabel since the jar file

  I want to add more than one image in a JLabel, but the icon property only allows me to add a. I thought I could use the rendered html to add the images I need using the < img > tab, but I need to use a URL that points to the image.
  
  How do I point to an image in the jar file? If I can't do it, is there another way to display multiple images in a JLabel since the jar file?

  Discover camickr [http://tips4java.wordpress.com/2009/03/29/compound-icon/ url] composed icon.

  DB

• Add several attribute of a tag in the xml file

  Hello
  
  I have a donnees_xml in the xml_test_table of the table in the format
  
  <? XML version = "1.0"? >
  rowset <>
  < ROW >
  < CLASS > XII has < / CLASS >
  KATE < TEACHER > < / TEACHER >
  < STUDENT_STRENGTH > 30 < / STUDENT_STRENGTH >
  < 50 OFFICES > < / DESKS >
  < / ROW >
  < ROW >
  B XII < CLASS > < / CLASS >
  < STUDENT_STRENGTH > 40 < / STUDENT_STRENGTH >
  < NUMBER OF GIRLS 15 > < / NUMBER OF GIRLS >
  < NUMBER_OF_BOYS > 25 < / NUMBER_OF_BOYS >
  < / ROW >
  < / LINES >
  
  I need to change the xml in this format:
  
  <? XML version = "1.0"? >
  rowset <>
  < ROW >
  < CLASS > XII has < / CLASS >
  < age TEACHER subject = "37" = "Math" > KATE < / TEACHER >
  < STUDENT_STRENGTH > 30 < / STUDENT_STRENGTH >
  < 50 OFFICES > < / DESKS >
  < / ROW >
  < ROW >
  B XII < CLASS > < / CLASS >
  < STUDENT_STRENGTH > 40 < / STUDENT_STRENGTH >
  < NUMBER OF GIRLS 15 > < / NUMBER OF GIRLS >
  < NUMBER_OF_BOYS > 25 < / NUMBER_OF_BOYS >
  < / ROW >
  < / LINES >
  
  You will need to add several attribute to all the 'teacher' in the XML tag.
  I am able to add a single using attribute
  
  Select insertChildXML (donnees_xml, 'game of LINES/LINES/TEACHER', '@age', ' 37 ") of test_xml_table;
  
  Thanks in advance

  In this scenario, we have a simple find and replace the XML function using which i can replace the tag with (I understand this is not good was to solve this).

  Why not use two calls separate insertChildXML?
  The premiera adds the attribute to @age, and the other adds the attribute @subject on the result of the first.

• Lightroom 3 (to 3.6) - "an error occurred when attempting to change modules" - is the message that I get by clicking on expand or any other option. I deleted and reinstalled the .dmg file, but it continues still to be. Can anyone help?

  I just downloaded Lightroom 3 (to 3.6) and once I installed and opened it, it said that there is an error changing modules. I deleted and reinstalled the .dmg file, and it still gives me this error. Can anyone help?

  Error changing modules | Lightroom

• Pe10 - how to cut a long .mp4 and export these different cuts to separate the .mp4 files?

  I have a .mp4 to 2 hours I wanted to take a few short clips of.  How to do that effectively?  Here's what I did, but I would like to know if there is a better way.

  
  -J' created a new project.

  -J' dragged the .mp4 to 2 hours in space on the right media files.

  - Then I dragged this file to the timeline.

  - Then I stopped the video at each place I wanted to do a cut by pressing the scissors button.

  - Then I deleted all the clips from the excesses of the timeline, leaving 3 segments I was looking for.

  -I met at this point is my 3 segments were in the timeline panel, but I don't know how to export each in their own individual .mp4 files.

  - So what I did save the project under "Project1", then registered again as "project 2", and then again as "project 3". "

  -J' have opened "Project1", deleted the other 2 extracts of the timeline, then recorded as a .mp4 video.

  -J' repeated this process for the other 2 hooks respectively.

  Is there a way I can click on the clip on the Timeline and just export this part as a .mp4 or something?  This seems to be a lot of hassle to do something so simple as grabbing a few snippets of a great video.

  Thanks to all in advance!

  It's a way to do what you need.

  Another would be back in the timeline of the original project, after you did the Trims, would be to use the WAB (work area bar), to limit the share of exports / to just that area of the timeline. When we do share export /, they just need to make sure to check the work area to export and not chronology. For more information about the WAB (a great feature), see this article: http://forums.adobe.com/message/3961685#3961685

  Good luck and good editing,

  Hunt

• Not able to add the snapshot file to the virtual machine

  We have Win 2003 virtual machine running on ESXi 4.0.0 261974. The virtual machine has two vmdk files. We had taken the snapshot a few days back and today by mistake, we have removed one of the vmdk (DB - srv - 000001.vmdk - snapshot file). Now, we are not able to add the snapshot file to the virtual machine. When tried to add the existing vmdk, it displays only the source disk (DB - srv.vmdk). Please, help us to solve this problem.

  The GUI allows only adding the base vmdk. To add the Flash disk, you must manually change the vmx file. Registrations for the formerly removed virtual disk could still exist in the vmx file with... .present = "FALSE". After changing the vmx file you must reload the configuration. To do this, remove the VM of the inventory and add it back again (right-click on the vmx file).

  André

• How to see the response SOAP envelope full of BPEL

  Is it possible to see the full answer of BPEL (header SOAP + SOAP Body) in Enterprise Manager? As in path of Flow, I find that the value of the output variable.

  I don't think so there is an option to display the full message of EM, but you can check out the following blog to record the complete message in the log file.

  http://www.albinsblog.com/2012/10/getting-SOAP-envelope-of.html#.UyAcAPmSySo

  Concerning

  Albin I

  http://www.albinsblog.com/

• REST base BSF calls returns with SOAP envelope Addressing WSA namespaces

  We expose the OSB (sampleREST) Proxy service as a RESTful service that accepts requests HTTP (GET, POST etc.).
  For the HTTP GET method, the proxy service called BPEL process synchronous Composite SOA (HelloWorldProject).
  
  The HelloWorldProject is a simple synchronous BPEL process that returns the response in the form of "Namaste, < < nom_entree > >.
  
  OSB HTTP GET request:
  
  http:// < < hostname > >: < < port > > / sampleREST/proxy/sampleREST
  
  Answer:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  " < processResponse xmlns =" http://xmlns.Oracle.com/MySOAApplication/HelloWorldProject/HelloWorldBPEL "xmlns:env =" http://schemas.xmlsoap.org/soap/envelope/ "xmlns:wsa =" http://www.w3.org/2005/08/Addressing "> "
  < result > Namaste, nanan < / result >
  < / processResponse >
  
  Description of the problem:
  
  In response, there are 3 namespaces,
  ( 1) xmlns = "http://xmlns.oracle.com/MySOAApplication/HelloWorldProject/HelloWorldBPEL"(ce n'est PAS le problème) "
  ( 2) xmlns:env = 'http://schemas.xmlsoap.org/soap/envelope/"(c'est le problème) "
  ( 3) xmlns:wsa = 'http://www.w3.org/2005/08/addressing"(c'est le problème) "
  
  For a response from REST, we expect the CORRECT answer
  
  [Envelope response soap CONTAINER AND wsa address namaspaces]
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  " < processResponse xmlns =" http://xmlns.Oracle.com/MySOAApplication/HelloWorldProject/HelloWorldBPEL "> "
  < result > Namaste, nanan < / result >
  < / processResponse >
  
  I downloaded the Code from the OSB project.
  
  How do I get the answer REMAINS without SOAP ENVELOPE and NAMES ADDRESSING WSA namespaces?
  
  Thank you very much
  Nagaraj donna
  + 91-7387483335

  Hi all

  ATLAST, Oracle has provided a fix for this problem. I had raised SR with MOS.

  PFB the SR details to download the fix for this bug fix.

  Calls for expressions of OSB with SOAP and envelope WSA dealing of namespaces (Doc ID 1635230.1) is STILL based

  I hope this helps.

  Many thanks to all for your continued support and suggestions.

  Thank you very much

  Nagaraj donna

  + 91-7387483335

• Extraction of extensible in PL/SQL SOAP envelope group

  Hi all.
  
  I have the following in an XMLTYPE variable in PL/SQL SOAP envelope.
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < env:Envelope xmlns:env = "http://schemas.xmlsoap.org/soap/envelope/" container = "http://www.w3.org/2001/XMLSchema" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0 = "http://elmarwsoicdvmws/types/" >
  < env:Body >
  < ns0:getDVMValuesResponseElement >
  < ns0:result >
  < ns0:dvmValues > 10 < / ns0:dvmValues >
  < ns0:dvmValues > 11 < / ns0:dvmValues >
  < ns0:dvmValues > 12 < / ns0:dvmValues >
  < ns0:errorText > Ok < / ns0:errorText >
  < ns0:errorCode > 0 < / ns0:errorCode >
  < / ns0:result >
  < / ns0:getDVMValuesResponseElement >
  < / env:Body >
  < / env:Envelope > '
  
  I can extract the code of error and ErrorText variable without too much effort (even if I don't know there are easier ways), but now I have to extract the repeating group of dvmValues in a variable of type table.
  
  Any ideas/code snippets would be greatly appreciated, as I've read tons of docs and half the time they are too complex or too simplistic (given my ns0: variables), and it seems that many functions I use have been depricated.
  
  Kind regards
  
  Elmar

  Hi Elmar,

  Using a separate function to analyze the individual nodes is not necessary.
  You can extract all with a single query, thus eliminating the need to access the same document several times.

  For example, once you have the content in the RESP xmltype variable, you can do:

  SQL> create type dvmValues_t as table of number;
    2  /
  
  Type created
  
  SQL> set serveroutput on
  SQL>
  SQL> DECLARE
    2
    3    resp         xmltype;
    4    v_errorText  varchar2(2000);
    5    v_errorCode  number;
    6    v_dvmValues  dvmValues_t;
    7
    8  BEGIN
    9
   10    resp := xmltype('
   11  
   12  
   13  
   14  
   15  10
   16  11
   17  12
   18  Ok
   19  0
   20  
   21  
   22  
   23  ');
   24
   25    select x.errorText
   26         , x.errorCode
   27         , cast(
   28             multiset(
   29               select dvmValue
   30               from xmltable('*' passing x.dvmValues
   31                                 columns dvmValue number path '.')
   32             )
   33             as dvmValues_t
   34           )
   35    into v_errorText
   36       , v_errorCode
   37       , v_dvmValues
   38    from xmltable(
   39           xmlnamespaces(
   40             'http://schemas.xmlsoap.org/soap/envelope/' as "env"
   41           , default 'http://elmarwsoicdvmws/types/'
   42           )
   43         , '/env:Envelope/env:Body/getDVMValuesResponseElement/result'
   44           passing resp
   45           columns
   46             errorText  varchar2(2000)  path 'errorText'
   47           , errorCode  number          path 'errorCode'
   48           , dvmValues  xmltype         path 'dvmValues'
   49         ) x
   50    ;
   51
   52    dbms_output.put_line('Error Text = ' || v_errorText);
   53    dbms_output.put_line('Error Code = ' || v_errorCode);
   54
   55    for i in 1..v_dvmValues.count loop
   56      dbms_output.put_line('Value(' || to_char(i) || ') = ' || v_dvmValues(i));
   57    end loop;
   58
   59  END;
   60  /
  
  Error Text = Ok
  Error Code = 0
  Value(1) = 10
  Value(2) = 11
  Value(3) = 12
  
  PL/SQL procedure successfully completed
   
  

• Suggestion: Add timestamp in all Onyx log entries

  In the journal of Onyx, there is sometimes a timestamp and sometimes there isn't.

  Could you please include a timestamp on SOAP all the dumps of the envelope in the newspaper?

  ____________

  Blog: LucD notes

  Twitter: lucd22

  Hi LucD,

  Thanks for the suggestion! It is indeed important to have a stamp on each log entry. Your suggestion is classified as a feature request in our database and will run in a future release.

  Kind regards

  Ignat

• Save the address Suggestion Prefs - Options/Privacy tab bar

  I'm having a problem with the Firefox-> Options-> Privacy tab-> address bar-> when to suggest (x) command sequence. Namely, that it does not save my options.

  It seems suggesting bookmarks as a default, even if I have to say continuously simply suggest 'nothing. ' At a meeting of FF, I can say it functions "nothing" and it correctly. But if I exit/restart, it resets to "Favorites".

  I've lived all [[Knowledge Base Article | https://support.mozilla.com/en-US/KB/Preferences%20are%20not%20saved?s=Privacy+Tab & r = 6 & As = s]] and none of this works (or seems to apply in the first place). The only option I have left to try is the last part of this post, destroying the entire file and starting from scratch. Of course, I prefer to avoid that if possible.

  I tested it with other prefs, such as "remember my browsing history", and it saves/unsaves exactly as it should, which points to be a suggestion of the address bar issue alone.

  Any suggestions? Thank you.

  See:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.com/kb/preferences+are+not+saved
  • http://KB.mozillazine.org/browser.urlbar.default.behavior