Suggestion for separate management and VPN appliances roads IPSEC VPN

Similar Questions

• Is there a way to prevent the iPad mail to use the former winners as suggestions. I want to limit suggestions for only groups and individuals in my database of contacts

  Is there a way to prevent mail iPad with former winners like suggestions for email addresses?

  I want to limit suggestions for only e-mail addresses in my database of contacts.

  You cannot stop suggestions. Usually, you can remove but I just checked and I don't know if it is still possible.

• Satellite A135-SP4088: need drivers XP for power management and Hotkey utility

  Hello
  I could not find the drivers for the toshiba A135-SP4088, we bought 3 of them to the office and it is almost impossible to use with vista, so we go to XP SP2 and manage to get almost all pilots of the other models, but I can't find 2 utilities that work with this machine, they are:
  Toshiba power management (remember the bulb in the taskbar) :D

  Hotkey Utility (so I can change the brightness of the screen and go to hibernation (Fn + F4)

  I have al the rest works very well, but these two are a real problem, none of the ones I tested worked, some same crash XP and must return to a previous restore point.

  also, I did not install ACPI drivers, are they necessary?, what are those that show I'm looking for? given that the model does not exist in the csd.toshiba.com site.

  Now, how one of the largest manufacturers of laptops in the world can build a such nice computer without drivers for the most common operating system?, can someone explain me this because I sincerely do not understand.

  Thank you very much!.
  Indkt.

  Hello

  You can try after addresses:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  and
  http://209.167.114.38/support/download/ln_byModel.asp
  Maybe you can find the drivers you are looking for here.

  If this isn't the case then give some feedback and we will find another solution

  Welcome them

• Need help for remote management and SBS 2003.

  I can manage the server remotely, but try to make the computer customer is a bust. don't know if I'm missing a plugin or something else. all customer mailboxes are XP sp3.
  Do you need a SMS server just for 7 boxes?  Go ahead, change is grouped bot not SMS?
  IDK, I inherited this network.
  I can install 3rd pty software on all the boxes, but then why do I a remote on the server management option?
  I'm confused & pretty angry atm

  Your question would be better in the Technet forums where the network and system administrators to wander and have a lot more experience with Small Business SERVER 2003: http://social.technet.microsoft.com/Forums/en-us/categories/

  RDP ports are open on the XP boxes? The RDP service runs on them? I'm not too familiar with it on SBS, but could check those.

• DVS switch or a standard for the management and vmotion - and what about 1000v?

  Couple on this questions:

  (1) is there a drawback to the use of the DVS of management? I seem to remember at least possibly in the early days of DVS that there is a dependency on vcenter - so that if vcenter was declining, the hosts lost connectivity. I'm sure that this is no longer the case? But... there at - it all real aisles at the use of DVS for management?

  (2) is there a reason NOT to use a vswitch 1000v for groups of management ports?

  1) there is still a dependency on vCenter for management but if vCenter is down the vDS will still continue to operate your just will not be able to manage the switch.

  (2) 1000v is that a Cisco developed vDS - so the same applies and that there should be no problem to use it for the administration port groups.

• Suggestions for a SECURE AND FREE Web site for screensavers? __

  This site is SECURE AND FREE Screensavers?

  I use a photo from my computer, but it won't be unlocked screen...

  SVC Pack 2 for Windows Vista

  pdrblb

  I wanted just a recommendation for SURE AND screensavers.

  Download.com is probably the safest bet.

  A recent survey showed that over 55% of sites "free screensaver" in fact included a Trojan horse hidden in the screen saver.

  Update your security software. Check anything you download before you install or run it and scan your pc regularly.

  Free WinPatrol program works better under Windows 7, but is always the best monitor optimized for Windows XP Vista &. http://www.WinPatrol.com/>

  SpywareBlaster works with Internet Explorer and Firefox. It will not uninstall spyware that is already on your pc, but it will prevent hijacks and other malicious changes to your browser.

  http://www.JavaCoolSoftware.com>

  http://www.SiteAdvisor.com>-Site Advisor warns against malware on websites, you are about to visit.

• The names of COD for separate free and full versions?

  App smartphone with the free and full (paid) version, both are distributed as different applications. How to name the COD files?

  (1) MyAppFree.cod and MyAppFull.cod

  (2) MyApp.cod (free is version 1.0.1 and complete is the 2.0.1 version)

  In the case of 1) if the user install the free version and then buy the full version, it will be two icons of the same application. Moreover, I have to change the package names if there PersistentObjects it would cause a conflict of app.

  Case 2) if the user purchases the full version to overwrite the free version (it comes will count as an upgrade, given that COD names are the same, and provider is the same)

  Case 2) in theory is better, but given my bitter experience AppWorld I don't know how it works in reality.

  Any ideas?

  It's very simple, really.

  Have the paid version to check the presence of the free or trial... He sends immediately a stop signal to the "lower" version (if it has a background process) and mark it for deletion at the next reset.

  The trial or free version also checks for the presence of the paid version, turns off and converts its opening screen a message saying: thank you for buying the paid version and this app will be gone when you reset.  Then, it is marked for deletion.

  I use this method for a long time, and it works.

  Also, you need not the names of different package whenever it is another name of COD, not only because the store persistent... it will give an error of duplicate class definition and no applications will not work.

  You can use a single KEY for both if you use purchase app or the license keys with try & buy, but it doesn't always work, you get ppl complain they bought it and it has expired.

• GANYMEDE + for the unified management of ASA and VPN auth

  Hello, I have ASA 5540 and 4.2 ACS (AD backend), I want authentic unified management and vpn access.

  For example, I have two groups in ACS (mapping AD): Admins, VPN access.

  I wish that Admins have full access (shell, VPN) and "Access VPN" only vpn, without shell of any kind.

  I understand how to do with RADIUS - use 'Service-type' and network access profile, but how to do it with GANYMEDE +?

  There is something

  I explained to him almost the same scenario in the post of 2008

  https://Cisco-support.hosted.Jivesoftware.com/message/853751#853751

  To achieve this, you should have even ASA added to GANYMEDE and RADIUS AAA cleint.

  

  Since you want to group admin must have FULL access so don't change anything on this group.

  Now vpnaccess Group on ACS must have only access to the VPN, then here you need to implement IP-based NAR

  Go into the setup of the Group > ip based NAR

  

  I hope this helps.

  Rgds, jousset

  Note the useful posts ~

• Configuration guide for ESXi 5 (Vmnetwork, management and vMotion) with NIC 2 network

  Hello

  I have 4 NIC in Server Blade 7 (ESXI 5), would like to dedecate 2 NIC for (Vmnetwork, management and vMotion) & NIC (iSCSI traffic) 2 with equallogic SAN.

  I equallogic guide to configure ESXI with it, but how do I configure (Vmnetwork, management and vMotion) with NIC 2, my priority is excellent speed for my virtual machine, and then nothing else.

  Then just go for classic switch.

  The configuration is a lot depend on existing infra, the trunk, the physical switch for redundant network & balance, 100 or network 1GbE, no.. virtual machines and etc. If there is a new configuration, I suggest you trunk 2 x available vmnic (the vm network) to balance the load and better performance.

• Creation of vMotion, management and iSCSI

  Hi all

  I have doubts that I'd like to have some clarification.

  First vMotion and traffic management.

  I have two network cards. My question is, should I create IDE oucederomsurlesecondport VMkernel for each one (and adding the vMotion Option and management traffic) adding a different IP address for each and put the two in a vSwtich but the example; an active nic1 for vMotion and nic2 Eve and the management of the same traffic, nic2 active and standby nic1. With this, I have two different networks, but by using two NICs in case of failure.

  Or create a VMkernel and activate them both on the same VMkernel and put the two active network cards.

  What is the best choice, or the best performance?

  I have 6 guests on this cluster, so I need to do this in on the hosts.

  First I use QLOGIC

  The iSCSI side, should I use VMkernel Port binding? Or just use a normal VMkernel with my wihout VLAN iSCSI definition of any Biding VMkernel Port on iSCSI Software adapter?

  I have both running, but do not know which is the best way to get the best performance.

  Thank you

  JL

  Nice day!

  In summary, you should do something like that.

  vSwitch0 - Mgmt & vMotion

  ====================

  vmk0

  --------

  Management

  Uplink 1: assets

  Uplink 2: Passive

  vmk1

  --------

  vMotion

  Uplink 1: Passive

  Uplink 2: Active

  vSwitch1 - iSCSI

  ====================

  vmk2

  --------

  iSCSI traffic

  Uplink 3: assets

  If you only have an uplink for iSCSI traffic, you don't have to set up the binding of ports.  iSCSI ports is for the multipath.  If you only have one NIC for iSCSI, you cannot have MPIO.  You need two or multiple NICs or uplinks to the multipath.

  Now, for the management and the links of vMotion, I suggest using only an asset and a liability for each type of traffic.  Although vSphere 5 has the multi-NIC vMotion functionality, the idea of separating vMotion and traffic management is to separate vMotion and its important traffic in your management traffic bursts, which happens to include your traffic HA (also important).  You have certainly not * have * to set it up like that, but maintaining vMotion on his own physical link will keep walking on your management traffic.  In the case of a defective cable, I'm sure you would rather a cluttered link as no management or vMotion traffic.

  All the best,

  Mike

  http://VirtuallyMikeBrown.com

  https://Twitter.com/#! / VirtuallyMikeB

  http://LinkedIn.com/in/michaelbbrown

• Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received error Code: U43M1D207. Any suggestions?

  Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received error Code: U43M1D207. Any suggestions?

  Download the update of fireworks from here:

  https://www.Adobe.com/support/Fireworks/downloads_updaters.html

  When you have downloaded and extracted the file, right click and then click on "Run as Administrator".

  This should work for you. I had the same problem and did and everything worked.

• z820: looking for a software raid manage and view the status of disks hard raid

  HP z820 workstation,

  product # D3J63UT

  I'm looking for raid management software

  

  Thank you.

  I suggest that you follow the steps listed in the HP Document: "Z - series Workstation detection and fixing a hard drive failure within the RAID Controller utility" in the URL: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04474148#N10829 you can find instructions how to enter each State type of RAID (Intel RST, 2308 LSI and LSI 9260-8i controller - It's the main RAID controllers usually associated with the HP Z820 workstation according to the particular configuration you ordered). Note that in most of the cases described in this document, you need to access the configuration of RAID controller during computer startup steps, by pressing CTRL + I (for Intel RST) or CTRL + C (for LSI 2308) or CTRL + H (by LSI 9260-8i). The installation program uses the RAID controller firmware and does not require to install complex inside Windows software, because it is done outside of the Windows operating system before starting. Find more details in "HP Z220 SFF, CMT Z220, Z420, Z620 and Z820 workstations maintenance and Service Guide" in the URL: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04205252-1.pdf , in the devices of annex b: Setup RAID (pp. 161-171) all types of RAID controllers that are relevant at the workplace Z820 are discussed.

• How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity

  Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which

  also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to

  Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the

  Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.

  I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,

  with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter

  all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not

  me what I want.

  Three questions:

  1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces

  external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for

  the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be

  "always there" when I run virtual machines

  2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to

  Connect an internal network adapter to several external network adapters?

  3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are

  relatively easy to set up (by an independent expert of the network)?

  Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the

  use virtual machines, once it is easy to install.

  Hello

  The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  For any information related to Windows, feel free to get back to us. We will be happy to help you.

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?