Superposition of information not showing in the print tab

Similar Questions

• the printer Xerox Phaser 3010 every time I do a draw it prints no and it show that the printer is paused

  help - please I have the xerox Phaser printer 3010 whenever I do a draw it does not print and it shows that the printer is paused it happened he was working? I tried to cancel and restart, troubleshooting, but nothing worked it keep suspended how change that? Help, please!

  Hello

  1. have there been recent changes to the computer before the show?

  2. the problem occurs when printing on all applications?

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Problems printing and printing errors.

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• Windows7 when I migrated to the Working Group at the field of the firewall has crashed. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  In my windows7 when I migrated to the task force to the area, crashed by the firewall. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  Hello arjunpottekkad,

  It is disheartening to know that have problems you with the firewall. As I understand it the incoming and outgoing traffic rules are missing from the firewall.

  The question you posted would be better suited in the TechNet Forums . I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you are having problems with the Windows Firewall or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Do not show in the drop-down menu bookmarks

  I want my bookmarks to display in the drop-down list only in the sidebar that I don't want to use

  Is that the drop-down menu that shows if you click view your bookmarks' button next to the button star bookmarks in the Navigation toolbar?

  Note that when you to bookmark a page by clicking on the star, then the new bookmarks is created in the unsorted folder.
  The unsorted folder does not show in the drop-down list.
  You can click on the underlined blue stars another moment to change the bookmark and move it to another folder.

• Satellite Pro L20 PSL2YE: 1 GB Ram upgrade does not show in the Bios

  I just bought a 1 GB mem stick samsung 4200 s 533 mhz for my L20.
  It does not show in the Bios or in the main menu in Device Manager, but it shows in cpu - z and pz Assistant 2007.

  I am very confused, and upgrade the bios on toshibas website does not include one for the base PSL2YE L20.
  I wonder if all the bios upgrades L20 will work with my machine.

  any help would be great because I am so confused,

  Hello

  If you already have a biosupdate on your machine? It s a bit confusing that you´re confused since I was wondering what do you say with
  "toshibas Web site does not include one for the base PSL2YE L20". Do you mean the bios?

  Please give some feedback.

  P.s.: you can also try this site for a biosupdate:
  http://209.167.114.38/support/download/ln_byModel.asp

  Maybe you will find something.

• The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?

  The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?  Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.

  Thank you best regards &.

  Atul Zade.

  CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.

  John

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• the power in the system tray icon does not show me the remaining battery time

  I bought a new battery for my inspiron 1420 and the power in the system tray icon does not show me the remaining battery time, it indicates the only remaining percentage. My battery earlier showed. Can someone tell me how to show the remaining time. Thank you

  I force install quickset once again, but I installed the support center and once my system has been restarted, he began to show me both but I'm not sure, this is because the installation of support center. Thanks anyway

• My xperia ray does not show in the service of update sony

  My xperia ray does not show in the service of update sony

  Run sus in compatibility mode for windows 7.

• USB does not fit in the printer

  Have a deskjet 1050a and USB does not fit into the printer.  Help

  Thanks I found one.  Printer downloaded and everything got set up.  (except that it took me 2 days to do it).

• Ethernet adapter is not showing in the Device Manager

  

  I have a vastro 460 with i3 with intel and Windows 7 32 bit. try to install the driver for the network card, but does not. Ping works but do not show in the Device Manager.

  Any help will be much appreciated

  Hi EMH.

  You will need to install the Chipset Drivers first and later network adapter drivers. The IP address that you have ping is the local host and works, even when there is no network card detected.

  Please download and install the NIC in the network section and the section Chipset Chipset drivers from the following link, by drilling in the serial number:
  http://Dell.to/QjjZDA

  Please let me know if you need more assistance.

• images not showing in the thumbnail view

  My pictures do not show in the view thumbnails, only the image of space booked by default. How can I get my real pictures to show in the thumbnail?

  I answered my own question. in folder options, I had the "always show icons, not thumbnails" box checked.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu.

  I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu. I'm on a Mac Pro 2013. Latest version at all.

  Looks like without the audio element is a nested element.  You will need to restore the audio signal in order to see the wave forms.

  I have the same problem (sometimes):

  https://forums.Adobe.com/message/8527998#8527998

  Without rhyme or reason, as far as I can tell.