niUSRP Signal.vi set not allowed inside loops?
It seems that niUSRP than signal.VI set is not allowed in loops. After the decision of the VI, I get this message:
niUSRP configure Signal.vi
Is there a way to change the frequency of the carrier, while the driver is running? With the help of property Node.vi of niUSRP to set a new frequency within a loop is also not working. My goal is to create with the USRP to frequency hopping. Hi YYY. Thanks for your VI, including in the post. I was able to download it and reproduce what you see. There are a few things that need to be changed in order to get this to work. First of all, you don't need to have the niUSRP function to configure Signal.vi inside your time loop. You can put this outside the loop and a property node allows you to change the frequency with a property node. You already have the property node in your code, you just need to change it to write instead of read. There is an example that will do just that, if you just want to use it instead of modify your code too much. It's called niUSRP EX Tx continuous Async Reconfig on the Fly.vi. Then, the reason why you are not able to go at the rate of 1 ms/s IQ with the code you have is because you're trying to read and write the frequency during each iteration of the loop. Because of the time to query the hardware, set the frequency and read the return frequency, the I was able to get the maximum rate of IQ was around 500kS/s. This is due to a combination of hardware and driver limitations. Even with the example above uses the property instead of the function of the configuration node, if I put in an indicator to look at frequency I can't use a faster speed of the IQ. Try to change the property node and the withdrawal of this indicator, you should have a lot more success. Let me know if this does not work for you or if you have any other questions, I'd be happy to help you. Tags: NI Products CTE not allowed inside a stored proc/function? Using Oracle 11 g 2. This relaxed in 12 c? Agreed. If you write the complete SQL statement, it works very well (I assumed SELECT INTO...). Share the rest of your service if you want help with it. Also, you can't assign a value to a function parameter that you tried on line 9. Ezvpn distance, not allowed to exempt NAT inside I'm a bit puzzled as to why I'm not allowed to have this rule of NAT exemption in place while the distance EZVPN is enabled. Here's my topology: I created a DHCP pool reserve based on the MAC address of my laptop; He received the reservation address. I then created an exemption NAT to allow my laptop to communicate with the network 172.16.16.x. Here is the config: access extensive list ip 172.16.16.0 inside_nat0_outbound allow 255.255.255.0 host 172.16.17.175 Global (inside) 1 interface It works fine, but I cannot activate the EZVPN remote that I have configured on the SAA. Here is the error: Output from the command: 'vpnclient enable '. * Delete "nat (inside) 0 inside_nat0_outbound. CONFLICT of CONFIG: Configuration that would prevent success Cisco Easy VPN remote I'm looking for two things, to explain why it is and why it is not allowed and help to set up a work around so that the two can be activated. Any help would be appreciated. Thank you Steve OK, logical now. NAT exemption is so out of the game according to the guidelines of my post above (can't configure easy VPN and NAT exemption remotely on the same ASA). Second option, I have not tested myself, so just my theory that you can test: no nat control Since you have not stated nat on your external interface, it should allow that access you. Or third option, never tested: permit access-list static-sheep ip 172.16.16.0 255.255.255.0 172.16.17.0 255.255.255.0 public static 172.16.16.0 (inside, outside) access list static-sheep Unfortunately, there are limited once the ASA is configured as Easy VPN remote, as it is supposed to be used just to access the HQ site. I purchased itunes songs. When I try to burn it to a CD, a message that my computer is not allowed to play. It's only a few songs that I bought. I follow the steps to authorize my computer and I get a message that my computer is already allowed. So when I try to burn again, it starts all over. This loop continues to go. I can't find a way to get through itunes (Apple) to solve this problem. I tried to restart my 'control user account settings' on my computer. Delete and redownload the songs if it's free in your country. (142971) My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443. I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem. Was there an update and now it's a bug? Help! Thank you! Run the Console application in one of the following ways: ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top). ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad and start typing the name. The title of the Console window should be all Messages. If it isn't, select SYSTEM LOG QUERIES ▹ all Messages in the list of logs on the left. If you don't see this list, select List of newspapers seen ▹ display in the menu at the top of the screen bar. Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V. The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough. Please don't dump blindly thousands of lines in the journal in this discussion. Please do not post screenshots of log messages - text poster. Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting. When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created. If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it. My player does not allow me to sign a document. The security setting says not authorized for signatures. How can I change the security allowed? You can not. You must have Acrobat and the file password - change for this. SecurityException: JVM Shared, is not allowed to set the Security Manager When run another Applet Java and discoverer of opening I get the following error oracle.disco.DiscoApplet SecurityException: JVM Shared, is not allowed to set the Security Manager java.lang.SecurityException: JVM Shared, is not allowed to set the Security Manager at sun.plugin2.applet.SecurityManagerHelper.checkPermissionHelper (unknown Source) at sun.plugin2.applet.AWTAppletSecurityManager.checkPermission (unknown Source) at java.lang.System.setSecurityManager0 (unknown Source) to java.lang.System.setSecurityManager (unknown Source) at oracle.disco.DiscoSecurityManager.init (unknown Source) at oracle.disco.DiscoApplet.init (unknown Source) at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init (unknown Source) to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source) at java.lang.Thread.run (unknown Source) After clicking 'OK', the following red text shows in the window of discoverer with a small error icon "Error. Click for more details" When I click it evokes the java console to show the above I use Windows 7 64-bit Java1.7_25 I also have users who are experencing the same thing. Addition of our page basejpi.htm which is used to launch our applet forms seems to have solved this error for us. (your current security setting does not allow this file to download) How to fix my security settings to not have the phrase your settings current security do not allow this file to download and stop from popping up whenever I want to download on the internet. I tried to change it to medium-high security also, failing, but there is no idea of work.any? See: http://www.itsolutionskb.com/2010/04/your-current-security-settings-do-not-allow-this-file-to-be-downloaded/ Microsoft Security MVP, 2004-2010 vSphere HA is inside in vain. Operation is not allowed in the current state. Hello I'm testing vSphere HA with two hosts ESXi in my lab. I have a VM on each ESXi host and when I try to open HA by closing the port connection from the switch to one of the hosts, the cluster of vSphere tries to failover of the VM on the host failed to another host, but he is not successful. The events under the Cluster gives this warning: vSphere HA switched in vain < VM - > < Home > cluster < cluster name>. vSphere will try again if the maximum number of attempts has been exceeded. Reason: The operation is not allowed in the current state. Screenshot of the error is attached. I tried to restart the service of server vCenter and that did not help. What could be wrong here? Thank you. Shivani Hello adel. Do not disable the HA data store. If you have a physical server just power the server by pulling the power plug or just it crash. If you have virtual server vESXi, and then directly 'Power Off' there instead of the stop. Tunnel VPN L2L with NATTing will not allow traffic which will be initiated by spoke to the hub. Traffic from internal hosts will NAT address works ok, but what speaks tests it traffic never connects. get the 10.1.12.232 NAT host would be 172.27.63.133 and past through the VPN tunnel to 10.24.4.65 without problem. However when 10.24.4.65 tries to ping or connect to 172.27.63.133 traffic does not make inside host 10.1.12.232 ASA-1 #. the object of the 10.0.0.0 network Hello First of all, I would like to remove these two lines because they do nothing productive trigger error autnomous mutation! Why not allow select in the trigger body? Assume that you are doing something like this: Then do you one insert call to do more than three: This last call insert inserts 3 records in your table - 101, 102 and 103. When you have a trigger FOR EACH ROW, which will be called three times, but there is no way to predict in what order, and when the trigger will fire for example at c1 = 102, the table is the "mutation" - it is located in the heart of a change and you don't know if 101 or 103 or both is in the table. Oracle does not allow you to do a select on the table of this mutation. When you remove the FOR EACH ROW clause, the trigger only will be called once at the end of this call to insert, moment in which the table is no longer changing and so your code will be located safely c1 max. operation not allowed on java.lang.object Hello and also add convertDomainDateToUtilDate new method to your class. Method will return java.util.Date to your oracle.jbo.domain.Date virtual column not allowed here? What would you do if it is not good to do? Hard coded updated inside THEN incorporate tree ELSE after column_name my iphone does not allow me to use, because it asks me to insert aSim card I never use Sim Card in my iphoe 4 s and now my iphone does not allow me to use, because it asks me to insert aSim card then what can I do to make my iphone working properly again < object edited by host > You must use a sims card to set up your phone and continue to make calls. If you just want to use the Wi - Fi you can exit the sims, but you will need initially. Contact your operator for more details. Remove or change the SIM card in your iPhone or iPad - Apple Support Sync is performed even it is not allowed I was shocked that Sync is not allowed on another PC. All bookmarks showed me on another PC. How is that possible? Is this security problem? Hi, Toplisek To find the right solution to your problem, we need a few more non-personal information on your part. Follow these steps:
click Help and select troubleshooting information. If you would like more information on the troubleshooting information page, please read the article, use the troubleshooting information to help solve the problems of Firefox. Thank you in advance for your help! How put the icons on my phone? How to close applications (e.g. camera), not only to return to the home screen? I would close an application, as soon as I'm done with it and not have to do so by accessing the home screen, then press during 2 seconds on the button home etc. y at - it an anti malware for os 10.6? y at - it an anti malware for os 10.6? I have an XP pro pc HP deskjet 5650 printer (C6490A) I use size document 81/2 x 11 "it prints well with that when I pass paper stock map for calandars a few times it will print most or the time it will say wrong format of paper or jam or do both. I T42 can't change BIOS settings I can enter the BIOS very well, I just can't change settings in the BIOS settings screens because it says that I must be in 'admin' mode I entered the BIOS by pressing the button "Access IBM" blue, F1 or F12 and I encounter the same problem without wSimilar Questions
CREATE OR REPLACE FUNCTION fn_nextprev_workdate(
p_date1 DATE,
p_num NUMBER)
RETURN DATE
IS
v_num NUMBER;
v_date DATE;
BEGIN
--p_num := 1;
IF p_num < 0 THEN
v_num := -1;
END IF;
WITH t AS
(SELECT COUNT (
CASE
WHEN TO_CHAR (p_date1 + ROWNUM*v_num, 'fmDY') IN ('SAT', 'SUN')
THEN 1
END) cnt
FROM DUAL
CONNECT BY ROWNUM <= ABS(p_num)
)
SELECT cnt INTO v_num FROM t;
RETURN sysdate;
END fn_nextprev_workdate;
/
Global 1 interface (outside)
global interface (guest) 1
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (guest) 1 0.0.0.0 0.0.0.0
operation was detected and listed above. Please solve the
above a configuration and re - activate.
!
network object obj - 172.27.73.0
172.27.73.0 subnet 255.255.255.0
network object obj - 172.27.63.0
172.27.63.0 subnet 255.255.255.0
network object obj - 10.1.0.0
10.1.0.0 subnet 255.255.0.0
network object obj - 10.24.4.64
subnet 10.24.4.64 255.255.255.224
network object obj - 172.27.73.0 - 172.27.73.255
range 172.27.73.0 172.27.73.255
the object of the 10.0.0.0 network
subnet 10.0.0.0 255.0.0.0
network object obj - 24.173.237.212
Home 24.173.237.212
network object obj - 10.1.12.232
Home 10.1.12.232
network object obj - 172.27.63.133
Home 172.27.63.133
the DM_INLINE_NETWORK_9 object-group network
object-network 10.0.0.0 255.255.255.0
object-network 10.0.11.0 255.255.255.0
object-network 10.0.100.0 255.255.255.0
object-network 10.0.101.0 255.255.255.0
object-network 10.0.102.0 255.255.255.0
object-network 10.0.103.0 255.255.255.0
the DM_INLINE_NETWORK_16 object-group network
object-network 10.1.11.0 255.255.255.0
object-network 10.1.12.0 255.255.255.0
object-network 10.1.13.0 255.255.255.0
object-network 10.1.3.0 255.255.255.0
!
outside_1_cryptomap list extended access permitted ip object-group DM_INLINE_NETWORK_16-group of objects DM_INLINE_NETWORK_9
access extensive list ip 172.27.73.0 outside_8_cryptomap allow 255.255.255.0 10.24.4.64 255.255.255.224
access extensive list ip 172.27.63.0 outside_8_cryptomap allow 255.255.255.0 10.24.4.64 255.255.255.224
!
list of allowed outside access extended ip 10.24.4.64 255.255.255.224 172.27.63.0 255.255.255.0
list of allowed outside access extended ip 10.24.4.64 255.255.255.224 10.1.0.0 255.255.0.0
list of allowed outside access extended ip 172.27.63.0 255.255.255.0 10.1.0.0 255.255.0.0
!
NAT (inside, all) source static obj - 172.27.73.0 obj - 172.27.73.0 destination static obj - 10.24.4.64 obj - 10.24.4.64 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 172.27.63.0 obj - 172.27.63.0 destination static obj - 10.24.4.64 obj - 10.24.4.64 no-proxy-arp-search to itinerary
NAT (inside, outside) source dynamic obj - 10.66.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source dynamic obj - 10.70.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source dynamic obj - 10.96.228.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source dynamic obj - 10.96.229.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source dynamic obj - 192.168.5.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source dynamic obj - 10.75.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source dynamic obj - 10.11.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source static obj - 10.1.3.37 obj - 10.71.0.37 destination static obj - 50.84.209.140 obj - 50.84.209.140
NAT (inside, outside) source static obj - 10.1.3.38 obj - 10.71.0.38 destination static obj - 50.84.209.140 obj - 50.84.209.140
NAT (inside, outside) source static obj - 10.1.12.232 obj - 172.27.63.133 destination static obj - 10.24.4.64 obj - 10.24.4.64
NAT (inside, outside) source dynamic obj - 10.1.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
!
NAT (exterior, Interior) source static obj - 10.24.4.64 obj - 10.24.4.64 destination static obj - 172.27.63.133 obj - 10.1.12.232
NAT (outside, outside) source static obj - 10.24.4.64 obj - 10.24.4.64 destination static obj - 172.27.63.133 obj - 10.1.12.232
NAT (inside, outside) dynamic obj - 24.173.237.212
!
NAT (VendorDMZ, outside) the after-service automatic source dynamic obj - 192.168.13.0 obj - 24.173.237.212
outside access-group in external interface
Route outside 0.0.0.0 0.0.0.0 24.173.237.209 1
Route inside 10.1.0.0 255.255.0.0 10.1.10.1 1
Route inside 10.2.1.0 255.255.255.248 10.1.10.1 1
!
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-DH2-esp-3des esp-sha-hmac
Crypto ipsec pmtu aging infinite - the security association
!
card crypto GEMed 8 corresponds to the address outside_8_cryptomap
card crypto GEMed 8 set peer 64.245.57.4
card crypto GEMed 8 set ikev1 transform-set ESP-AES-256-SHA ESP-AES-256-MD5
GEMed outside crypto map interface
!
: end
ASA-1 #.
nat (outside,inside) source static obj-10.24.4.64 obj-10.24.4.64 destination static obj-172.27.63.133 obj-10.1.12.232nat (outside,outside) source static obj-10.24.4.64 obj-10.24.4.64 destination static obj-172.27.63.133 obj-10.1.12.232
Then, I was running packet - trace to see what NAT rule actually hit you.
packet-tracer input inside 10.1.12.232 12345 10.24.4.65 12345
case 2. We have table x, trigger appears on the table x as soon as the table is updated to trigger fires. inside the body that we select just for table 'x' it throws error error changing table
can someone please explain why?
my example as follows:
case 1:
CREATE TABLE MyTable
(NUMBER of c1);
INSERT INTO myTable VALUES (1);
commit;
INSERT INTO myTable VALUES (2);
Select * from myTable;
C1
------------
1
case 2:
CREATE TABLE myMaxTable
(maxValue NUMBER);
CREATE TABLE MyTable
(NUMBER of c1);
INSERT INTO myMaxTable VALUES (NULL);
COMMIT;
CREATE OR REPLACE TRIGGER myTrigger
AFTER ON INSERT myTable
FOR EACH LINE
BEGIN
UPDATE myMaxTable
SET maxValue = (SELECT MAX (c1) FROM MaTable);
END;
/
INSERT INTO myTable VALUES (1);
INSERT INTO myTable VALUES (1)
*
ERROR on line 1:
ORA-04091: table HUNBUG. MYTABLE is changing, function of triggering/can not see
ORA-06512: at "HUNBUG. MON_TRIGGER', line 2
ORA-04088: error during execution of trigger ' HUNBUG. MYTRIGGER'
You have three records in the table:
INSERT INTO myTable VALUES (1);
INSERT INTO myTable VALUES (2);
INSERT INTO myTable VALUES (3);
INSERT INTO myTable
SELECT c1 + 100
FROM myTable;
I use jdeveloper 11.1.1.5
I had used this code in my AMImpl method
My scenario is to perform this operation ViewObjectImpl vo = this.getFinPeriodsView1();
Row vor= vo.getCurrentRow();
System.out.println("Current date : " + (vor.getAttribute("FpFromDate") + 1) //getting error as operation not allowed on java.lang.object
+ "-"
+ now.get(Calendar.DATE)
+ "-"
+ now.get(Calendar.YEAR));
select max(add_months(fp_from_date,1)) from fin_periods //This value is to be set to FPFromDate Attribute for FinPeriods
I need to do this for 12 periods that example sample isselect max(add_months(fp_end_date,1)) from fin_periods //This value is set to be set to FpEndDate Attribute for FinPeriods
How can I do this in my method of AMIMpl. for (int i=0;i<=12;i++)
{
select max(add_months(fp_from_date,1)) from fin_periods;
select max(add_months(fp_end_date,1)) from fin_periods;
}
First add after the stuff inside your implementation code
//Code Stuff in your mathod as follows
Calendar cl = Calendar.getInstance();
java.util.Date dateFromTable = convertDomainDateToUtilDate((oracle.jbo.domain.Date)vor.getAttribute("FyStartDate"));//check now
cl.setTime(dateFromTable);
System.out.println (cl.getTime());
cl.add(Calendar.DATE, 30);//add 30 days
Date toDate = cl.getTime();
System.out.println (toDate);
//
public java.util.Date convertDomainDateToUtilDate(oracle.jbo.domain.Date domainDate) {
java.util.Date date = null;
if (domainDate != null) {
java.sql.Date sqldate = domainDate.dateValue();
date = new Date(sqldate.getTime());
}
return date;
}
UPDATE WR_MEASURE_VALUE SET p_FieldToUpdate = null, pa_entered_date = sysdate
WHERE WR_MEASURE_VALUE_OID = v_MeasureValueOID_arr (i);
p_FieldToUpdate is the field. I get an error stating that the virtual column not allowed here.
I tried to assign this value to a local variable and got the same thing. What do about it? I didn't create a conditiional for each value that might be stored in p_FieldToUpdate.
Thank you 
Maybe you are looking for