Support of the gamepad for puppets

Similar Questions

• Why is scanning is no longer supported on the mountain for CM1312 Lion?

  HP again shows that it cares about its customers.

  Choose to not support scanning for CM1312 and many other printers under Mountain Lion (10.8) is an example of terrible business practice. I will never buy an HP product again.

  And, no, VueScan (which costs $ 50!) is not a viable option.

  To goodbye HP. Never again.

  Hello

  Although it is no longer officially supported, install the v10.7 software usually works as a workaround for my experience.

  You try to install the latest version of the software 10.7 below:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3558903&swEnvOID=219&swLang=8&mode=2&taskId=135&swItem=t2-100706-1

  Once launch setup of the file right click (or CTRL + left click) the HP installation program, then select open (which will bypass Geatekeeper software is not signed to 10.8).

  Once having completed the installation try using scanning HP within Applications-file MFP HP Laserjet.

  Hope that helps,

  Shlomi

• Language support in the Air for IOS Installer

  Hello

  I really need some help here!  Any help is appreciated!

  I created an app for iPad that currently support only Danes.

  I update the application in support of the English and The name of the application (see icon below) I would change according to the language on the iPad users.

  In the - app.xml I changed the node name like this:

  < name >

  "< text XML: lang ="en"> English App name < / text >.

  "< text XML: lang = 'da' > App Danish name < / text >.

  < / name >

  However, it always shows the English name.

  I tested with other languages like the french who works very well

  "< text XML: lang ="en"> French App name < / text >.

  I just read that Danish is not supported by the air Installer? Why?

  http://help.Adobe.com/en_US/air/build/WSfffb011ac560372f2fea1812938a6e463-8000.html#WSfffb 011ac560372f2fea1812938a6e463-7ffd

  Is there another way to do this?

  I use CC Flash and Air 14.0.0.178 (using the command line for compiling)

  Thank you

  Rolf

  Danish is not supported. End of week (tomorrow), I'll update Adobe AIR SDK with Danish support. Here you can enter the http://gamespoweredby.com/adt.html but the version I will use will be the last beta - 15.0.0.243 or newer. Currently, there are 14.0.0.157 (obsolete).

  Also you must connect on bugbase and put your https://bugbase.adobe.com/index.cfm?event=bug&id=3710257 vote to support native Danes

• Customer error supported download the files for the client vSphere 5.0

  Hi all

  
  

  I am new to VMware and learning ESXi 5.0. I built my 5.0 ESXi host and then downloaded the 5.5 vSphere client. Given that I have only one host; client vSphere 5.5 can handle that. I installed the client and enter the IP address of the host with root/configured password management. He gave the certificate WARNING said to download the files from customer support. He has always exceeded with error as you can see it.

  
  

  I'm under client on a LAN connection high speed, I even changed the connections to see if access to the internet the problem. It is more simple home, 1 host installation, a windows 7 computer (with vSphere client installed), both connected to my DSL modem/router. The client support files won't download anything. Help please!

  
  

  

  Sorry my bad vSphere Client 5.5 support ESXi 5.0 but Client vSphere 5.0 ESXi host does not support the 5.5U1 (Build 1618071)

  Check the compatibility matrix for more information vSphere Client

  

  VMware product interoperability matrices

• How can I connect with the support of the conversation for download CS5?

  I tried a no. of times to get the support for my photoshop cs5 conversation.  I have a new computer and it doesn't have a dvd for download from my drive.  I spoke with chat support and they recommended that I followed a link to download.  https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  Here, I found what I was looking for, but it comes in 2 parts.  After downloading, I am unable to open anything, and I get the following message: "the file archive Flash Pro CS5 is missing.»  You need all parts in the same folder in order to extract Flash Pro CS5.  Please download all parts"I also" we encountered the following problems: setup initialization failed. " "File not found, please download Adobe Support Advisor to date the problem."

  I had downloaded part one and two. However, they are separate downloads, and I do not understand why it tells me to download all parts.

  In addition, it is very difficult to find the chat box which is 24/7.  There is a place where you can see the support options, but the Chat option is not active. [The forum option is an active link].

  Your help/advice is appreciated.

  you need to dl the 7z files, put them in the same folder, and then double-click the exe file and the exe file.

• T400 size maximum drive supported by the BIOS.

  Anyone know what the maximum hard drive size supported by the BIOS for a T400?

  It does not exist. You can use any disk sata hard with 2.5 inch form factor and 9.5 mm thick.

• Trying to create the recovery for Vista, error message disk on scriptlibrary.dat

  try to create a recovery disc for vista, cannot that a window pops up with the following.

  ScriptLibrary.dat

  cannot be varified for digital certificates, automation server can't create object

  Help, please

  Hi Michael,

  You're talking about recovery disk from the manufacturer created from the computer recovery partitiion or are you talking about a generic recovery for repairs disk (making it impossible to reinstall the operating system)?

  If the recovery disk from the manufacturer, please contact technical support from the manufacturer for assistance that the process of creating a disk of the partition recovery is their process and not Microsoft and varies by manufacturer and sometimes even my computer within this manufacturer model.  We do not know how to deal with each type or how to handle a problem such as you experience with this process - even if we knew that the manufacturer make and model specific to computer which you did not (but with which we might be able to provide specific links to the manufacturer).

  If you mean a recovery for the repair disk, then try using the following to do an and see if it works any better than any method that you use: http://www.vistax64.com/tutorials/141820-create-recovery-disc.html.

  I hope this helps.

  Good luck!

• Support of first feature for WLS 10.3.6

  This thread has been opened / answered in the Support of Oracle. It is a frequently asked question and is shared to improve the quality of knowledge in the community.

  Oracle WebLogic Server Version 12.1.x has a 'First support Ends' Date Dec 2016.
  Oracle WebLogic Server 10.3.1 Version or higher first support Ends' Date is August 2018.
  
  Is there a mistake for WebLogic Server 12.1.x at the date of the first Support Ends?
  Why the first support for the version 12.1.x would end sooner then 10.3.1. or higher?

  I confirm the dates that you see are correct. The end of the Prime Minister in favour of WLS 10.3.x is December 2018
  and the end of the Prime Minister in favour of WLS 12.1.x December 2016.

  Please note that a particular version of WLS, you must also take into account the information contained in:
  https://mosemp.us.Oracle.com/epmos/faces/UI/km/DocumentDisplay.JSPX?ID=950131.1 Note 950131.1 - Error Correction Support for Oracle WebLogic Server Dates
  Where you can see also end of the grace period (which is the end of the support of the correction for this particular version)

  In the case of WebLogic Server 12.1.x. the Prime Minister support end date is within the normal time
  'five years after the general availability (GA) date' - as documented here:
  http://www.Oracle.com/us/support/lifetime-support/index.html http://www.Oracle.com/us/support/Lifetime-support/index.html

  There is no official justification/explanation why end assistance first of WLS 10.3.x is longer then usual.
  but you need to consider that matter FMW 11 GR 1 stack, which is currently based on 10.3.x WLS technology

  a wide range of products. Many products (such as forms, reports, Webcenter content) have not yet been

  migrated to the 12 c technology. The support of the Prime Minister is longer 10.3.x WLS in order to allow sufficient time to align

  the batteries of two products (FMW11gR1 and FWM12c).

  Best regards
  Elena Mason
  Global Customer Support Engineer, team support of forms/States
  Support for Certification of middleware and Community Team
  Middleware (MOSC) certification https://community.Oracle.com/community/support/middleware/middleware_certification

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

• What will be the promised for k 4 HDMI support for 55ZL2 available update?

  Why is there always the limit for the 1. 4B inputs HDMI 1920 x 1080.
  The HDMI-based specifications at least there must be support upward
  given to 30 Hz for 4 k content via HDMI.

  Also, he had been promised by Toshiba that all UHD TVs with the NFTC engine
  get this update of the firmware already in the last year.
  So far, it is still not available. It's a shame, related to the huge
  money I spent for this TV.

  Hello

  Unfortunately I think that no one here can offer some info on the new firmware. This is the forum user and here we do not find an official statement on this subject.

  From time to time, check the firmware update page and check if new firmware is available for download.
  Installed the latest firmware? I mean, later, that you can find on http://www.toshiba-om.net/firmware.php?

• Thin Client T510: Do not support the SMB for no image preload on Linux platform

  Hello world

  I have a problem with a Thin Client T510 (C4G87AT #ABA), this one came with Windows CE and today I flashed with a USB to thin Pro 5 (T6X52011). When I want to deploy the image I captured (wallpaper, RD Session etc...) I have the following error:

  2015-08-19 15:30:43 [error details]:... /... / Task/linux/ImageTask_Thinpro.cpp@384: Metheod of the Image is not compatible.
  .. /.. / Task/linux/ImageTask_Thinpro.cpp@1624: do not support SMB for no image preload on Linux platform.

  When I look in the console HPDM, I see the T510 and connected

  Agent version: 4.6.3670.21244

  HDPM 4.6 SP5

  OS: T6X52011

  My OS: Windows 8.1 x 64

  Can someone help me please? Thks and have a nice day.

  Hi, thks for this Council. Theres is how I fix.

  Firstly, the master repository has change from D:\HPDM\HDPM to D:\HPDM on the server, so the configuration was not good at the moment. Another thing, the password of the user hpdm has changed in Active Directory, but not in the configuration. I changed all the settings for in line with the current configuration and capture Images of thinpro news works very well and deploy this new works pictures well too but Deplopyement of old images does not work.

  I'll open another thread if I need assistance. In this case, I'll mark as fixed.

• all help and support links get the notebook containing the scrpt for said linl

  When I click on a link for support, homepage products, call, etc., using windows, link brings up Notepad containing the script for the link. I'm doing something wrong or is my computer is having problems?

  Hello

  1 did you changes to the computer before the show?

  2. do you receive any error messages?

  3. who is the operating system that you are using?

  4. how you are trying to access help and support in Windows?
   
   
  Perform the steps described in the article
   
  Reference:
   
  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

   

  I hope this helps.

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• Photosmart Printer 6520: Is the driver for Photosmart 6520 still supported by Mac OS Sierra, until I update?

  Is the driver for Photosmart 6520 still supported by Mac OS Sierra, until I update?

  Hello @JeffVirant - greetings!

  Thank you for visiting the Forums from the HP Support! It is a wonderful location to converse with the community, get help and advice.

  Printer HP Photosmart 6520 is compatible with MAC OS Sierra. Please go ahead with the upgrade

  You can download the MAC Sierra drivers for your printer from here: http://hp.care/2feP2V6

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!