supportbuddy is legitimate? they manage your mistakes?

Similar Questions

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• Problem adding email address to the site 'Manage your Apple ID'

  I want to add my XYZ e-mail address in the section "reachable to the ' site ' manage your Apple ID. However, I get the following message: "this e-mail address is already in use with another apple ID".

  Note that I have my email set up as my 'rescue email' XYZ on my site ' manage your Apple ID ".

  Could it be the cause of the problem? In other words, the rescue email CAN NOT be used in the section "can be reached to the?

  If it's NOT a problem, then why am I allowed to use my e-mail XYZ as my 'rescue email' address for my Apple ID site, even if he uses another apple ID!

  How can I know what another apple what ID?

  Very confusing to say the least...

  Furthermore, I tried to find a community called 'Apple ID' or 'Messages' of this post "help message" but couldn't find it. "FaceTime" is the closest to what I'm looking for. Please redirect me to the appropriate site if necessary. Thank you!

  Hello Michael,

  Thank you for using communities of Apple support.

  I see you are trying to add an additional email address to your Apple ID. If you already have an address assigned as your email of relief, that is probably why you can't add it as an additional e-mail address. See this support article for more information about Apple ID addresses: on your Apple ID email addresses

  If you want to change the emails, you can replace the recovery email address and use it as an additional e-mail address.

  Best regards.

• How to add contacts to your existing groups or how to manage your groups?

  Anyone know how to add contacts to your existing groups or how you manage your existing groups. How do you even add new groups I can't find a way to do this in the ocntacts.

  Hello

  1. what version of Windows is installed on the computer?

  2 are. what groups you referring?

  3. What mail client do you use?

  If you use Hotmail, you can post your request in the Windows Live Forum.

   

  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail

  You can check the link:

  http://Windows.Microsoft.com/en-us/Windows-Live/Mail-import-backup-restore

   

  Please get back to us with the above information so that we can help you accordingly.

• Media Player to manage your own albums

  Hello sorry to bother

  I was wondering is there a way to manage your own information from the album instead of use the onlinedata basis because I have a lot of foreign cd and when I pull them out a piece is placed in 3 separate albums and other times, it creates a new album for each song

  Thank you and sorry for the lack or the low information

  Hello sorry to bother

  I was wondering is there a way to manage your own information from the album instead of use the onlinedata basis because I have a lot of foreign cd and when I pull them out a piece is placed in 3 separate albums and other times, it creates a new album for each song

  Thank you and sorry for the lack or the low information

  Try Windows Media Player more! version 2.5

• I get a box that says, please verify your billing information. We discovered a problem with your last payment for creative cloud. Go online to manage your account and check your billing account. 19 days remaining. What is c?

  I get a box that says, please verify your billing information. We discovered a problem with your last payment for creative cloud. Go online to manage your account and check your billing account. 19 days remaining. What is c?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Hello, I am a student and I bought already cs6 (dvd) and would like to ask - is it possible to get an upgrade for cs6 premium and how much it costs and how are they managing?

  Hello

  I am a student and I bought already cs6 (dvd) and would like to ask - is it possible to get an upgrade for cs6 premium

  and how much it costs and how are they managing?

  http://www.Adobe.com/au/products/creativesuite/UpgradeInfo.html

• Program, managing your money get the version of the file is not compatible with Windows Vista

  I'm trying to run an old program, manage his money, on Vista Home Premium 64 - bit. It ran OK on Win XP. When I try to run the setup.exe, I get error - "the version of this file is not compatible with the version of Windows hou are running." I tried to use the program compatibility Wizard. No help. Same mistake. Anything else I can try?

  If you get this error and the Compatibility Mode doesn't help, then the program simply is not compatible with this version of Vista, and if you want the program, you will need to check with the manufacturer to see if they make a full install version which is compatible with Vista and buy the program more recent.  If they do not have such a version, then I'm afraid you're just out of luck with this program.  The only other option MIGHT be Virtual PC, but even that is not a guarantee and is a little extreme just to get an old program running.

  Sorry if this isn't what you wanted to hear, but it's like that.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• phones in bulk is a false company they take your money

  in bulk phones takes your money, nothing to do with is a scam they are not legitimate nothing to do with you will lose your money

  It's not just... Pls take this further or you give prove to people for them to know that bulkphones is false.

  Need an urgent answer to your @milthroooshkin

• What is the correct way or better to manage your site files according to the folder of your site?

  I apologize if this seems to be a silly question but I'm still having trouble getting my head around the management of files when using dreamweaver. I know that I am supposed to create a root folder that I created on my desktop. All of my sites that I have here in create in dreamweaver go to sub files in this main file or am I supposed to have several root file?

  Ive assumed I create a single up to that point. However I have other questions... for example when I create a fluid grid site I go through the steps of creating first my folder under this new site in my account from the main root for dreamweaver, save my css inside file when asked, and then I save the html file main Sub ' save under ' as well... However, as you know, creates then two files separate, 'catch-all' and 'response' but instead of placing them in my folder of pennies for this site, he places them in the root file instead of in the subfolder that is located in the file root (if necessary). If I manually move them to the sub folder to keep things tidy this will mess up my files? Dreamweaver will be able to go to search folder under rather than the file root where he keeps putting automatically their?

  Or I have the complete wrong end of the stick to understand how to make the management of the work all together?

  Any help greatly appreciated

  Ed

  OK so just to clarify. Each site actually has its own root folder and simply for the love of the organizations you place all of your files to the root of each site in a larger folder which in your case is called 'sites '.

  Exactly that.

  My confusion is that dreamweaver seems to have everything automatically create new site, I try to go in a root folder, I created a site earlier. That's why I guess you don't have that one folder root and all of your different sites exist within of the it.

  Ignore this. I see sometimes that happens as well. But because you browse to find the folder new root of the site in any case, it is imminent can be ignored!

  -I created a new folder outside of dreamweaver on my desk first who must accommodate all that documents sites. I was the creation of each new folder in what I thought, it's the main single root for dreamweaver folder that was on my desktop up to this point.

  There is no "single root for dreamweaver folder. As you might have guessed, each site has its own root folder and root each folder contains * all * files that make up this particular site. ***

  -J' then I open dreamweaver and will create a new site layout fluid grid

  -He asks me to save my css somwhere... I save in my new site folder (I now know what will be the root folder of my sites that each website has its own root folder)

  All my sites have a "_css" at the root folder. I precede these files with an underscore so that this and other like him (for example '_img', "_scripts", etc.) will sort together, and at the top of the list of files. This issue of _css in the root of this site, this is where I would put the stylesheet quote you. ***

  -When he opens all I go to 'file' and ' save under ' so that I can put the HTML in the document in my root folder as well. (don't forget this root folder is sitting in another folder called "root folder" but you assume I simply call 'sites' in this example.)

  So. ***

  -When I do this the html records in the folder root of the site as I hope.

  -However, dreamweaver application also my permission to create two new documents as mentioned (boilerlate and respond). Despite me trying to click the folder root of sites and it saves the documents it contains, like the rest, he saves instead what is in your folder "websites" in this example... next to the folder root of sites that i would have it should be in (not... correct me if I'm wrong)

  Well, this suggests that you have not set the root folder properly. These two files must be saved in the root of the site. If this location is not what you are talking about as the root of the site, then something is wrong.

  Why do you think that what is happening? or is it supposed to? I would have thought not myself.

  as I side question while I'm here... when I see that my css or js documents have been saved in the wrong place, as I assume they were in the example above... How can I change the location of their in dreamweaver so that dreamweaver knows where they have been moved to? I know not how to do for the HTML document main because its easily done using "save under" on the file menu, but I'm not sure how do for the other document that dreamweaver creates something like a checkerboard to fluid.

  Sorry... I'm sure it's painful for those who know how... but I'd love to get my head around things like basic

  The best way to change the location of all files used in a DW site is to use the DW files Panel to drag - move these files to the desired location. Management of DW links will kick when you do this and adjust all the existing links to these files to accommodate your move. ***

  Here is a series of images that show the process to create a new site-

  THE NEW PROCESS OF SITE

  

  NAME of THE SITE, THEN BROWSE to THE NEW LOCATION for THE ROOT (this image shows the starting state of those that have been done before)

  

  NAVIGATE TO THE FOLDER OF YOUR NEW SITE WILL BE CREATED IN WHICH

  

  BY CLICKING THE NEW FOLDER OPTION, YOU CREATE THE NEW SITE ROOT FOLDER AND THEN CHOOSE IT

  

  I CREATED TWO NEW FILES IN THE ROOT FOLDER THAT WILL HOST MY CSS AND IMAGES RESPECTIVELY

  

  After SELECTING THE NEW ROOT FOLDER of the SITE AND clicking 'Choose' I SEE THE DIALOGUE START WITH THE path box to ACCESS CORRECT WORMS CE FOLDER ROOT IN THE FIELD RECORD of SITE LOCAL

  

  I hope that helps!

• How are they managing storage Flash on my Macbook Pro?

  Hello, I have storage problems with my macbook pro, simply because I miss. I went through and eliminated a lot of my videos and photos because that's mainly what I use this for, but my storage is full. How to clear up the flash storage?

  For the other category in the display of information storage, see this support article. If the display appears to be inaccurate, try to rebuild the Spotlight index of the boot volume ("Macintosh HD", unless you have given it a different name.)

  Empty the trash if you don't have it already done. If you use iPhoto, emptying his trash internal everything first:

  ▹ iPhoto empty the trash

  In pictures:

  ▹ Show of the recently deleted ▹ file delete all

  Do the same thing in other applications like Aperture, with an internal feature of the trash. Then, restart the computer. Temporarily, which will free up space.

  According to the documentation from Apple, you need at least 9 GB of free space on the boot volume (as shown in the Infolog) for normal operation, not the mythical 10%, 15% or any percentage. You also need enough space to allow the growth of the data over. There is little or no advantage in terms of performance to get more free space than the minimum Apple recommends. Storage space you'll never use is wasted space.

  When Time Machine backs up a Mac laptop, some free space will be used to make a snapshots the, who are backups of deleted files recently. The space occupied by the local snapshots is declared as available by the Finder and should be considered as such. In the view of storage of the information system, snapshots appear them as backups. The snapshots are deleted automatically when they expire or when free space becomes less than a certain level. You don't need to usually and should not, remove snapshots them yourself. If you have followed the bad advice to disable snapshots the running a shell command, you may have ended up with a large amount of data in the other category. Ask for instructions in this case.

  See this support article for some easy ways to free up storage space. A common waste of space is old backups iTunes to mobile devices. As shown in this support article, select the devices tab in the iTunes preferences window, select the backup that you want to remove and click on delete the backups. Keep at least a backup of each device you use yet.

  You can, if you wish, use a tool such OmniDiskSweeper (ODS) to explore the volume and discover what is take up space. You can also delete files with it, but not unless you don't know you know what you remove and that all data is stored safely. This means that you have several backups, not one. Note that the ODS only works with OS X 10.8 ("Mountain Lion") and later versions.

  IMPORTANT: This comment is neither a recommendation nor an endorsement of any third party software. You should always do your own research to determine if the unknown software is safe and useful. Don't take the word of anyone, including mine.

  Deletion of files inside a photo library or iTunes will damage the library. Such a library should be changed within the application that created it. It is the same for e-mail files.

  Go further than if the problem is not resolved by the steps above.

  ODS cannot see the whole file system when you run simply by double-clicking; He sees only the files that you have permission to read. To see everything, you must run it as root.

  Back up all the data now.

  Install the application in the Applications folder as usual. Quit it runs.

  Triple-click any where in the text line below on this page to select, then copy the selected text in the Clipboard by pressing Control-C key combination.

  security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. You will be asked for your login password.

  The application window opens behind other open windows. When you scan a volume, the window will finally show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.

  I do not recommend that you make a habit of doing. Do not delete anything as root. If something should be deleted, make sure you know what it is and how it got there, and then remove by safer alternatives. If in doubt, leave it alone or ask for advice.

  When you are finished with the app, he quit and also to leave Terminal.

• Windows Boot Manager: your computer can't get out of hibernation

  Sometimes when I turn on the computer after that he was unable to get out of hibernation, a black screen appears stating that:

  Windows Boot Manager

  Your computer cannot come out of hibernation.

  Status: 0xc0000411

  Info: A fatal error occurred processing to restore data.

  File: \hiberfil.sys

  Any information that was not justified until the computer is entered in hibernatioin will be lost.

  Any information you can provide on how to solve this problem would be greatly appreciated.

  Thank you for your help.

  only @phil_34! => To avoid confusion and duplication of effort, please post all further follow-up replies to your original thread: http://answers.microsoft.com/thread/856d02a2-837c-4e10-ad51-82039bf5c166

• How you manage your signatures

  What you do with your signatures that are false positives and fire? Do you use event action filters or you turn off the signature? In some cases, I can see where it would be good to disable this signature. As if you have a DNS box which is patched and are not sensitive to a feat to get noticed by IPS - given that your system is patched and no other boxes are sensitive to the exploit so it seems logical to disable the signature, Yes? But the event action filters set up for signatures as GIS-3030, which, in most cases, it does raise that when the source is outside your network. I want just to make sure Im on the right track. Anyone know of a good site that treats of best practice, administration and policies IPS?

  Also how much is will monitor your network internal?

  Thank you

  When I'm troubleshooting a new alert I can usually 'connect pair packages' if I can put more context autour the alert itself. Although they get correlated in MARCH I use CSM for tuning the sensors and signatures. I'll cross-launch to IDM to pull down of the packet capture, recording descriptive names a little in case I need to see again them later. I also use a large engine netflow (mazu networks) of reporting to see where the PC suspect that happened and then use the tools online as dnsstuff.com, spamhaus DROP lists, Dshield, to see if the IP address is on a block list. This tool (as well as Arbor Networks, Lancope, etc.) also make their own behavior analysis network non-based on signatures and sometimes (not always) something with correlate here also.

  After that I get enough information I try to deal with the actions on the sensor itself. Sometimes it takes to fall back on a rule of drop of MARCH, just to rule out false positives or handle specific cases, but I think that its best to maintain the alert occurs first place. Having too many filters gets ugly fast.

  You should also be left Cisco Intellishield's service; each sig IPS subscription gives you access to detailed information on the IPS sigs and vulnerabilities that have encouraged the GIS in the first place (for free). Excellent service. I was able to disable a bunch of sigs using it alone.

  Good luck.

• BlackBerry Smartphones video calls between BlackBerry or Voip calls must read more than a year a RIM does nothing about it...! Must be in bb10 correct your mistakes

  Well, I'm not a programmer, but those who are not the their: Please answer this... ?

  Why isn't their an app that can allow us to make calls voip blackberry for blackberry ok forget voip called something like Skype or facetime where to users of phones like blackberry 9900 or the 9860 can call the other times video I had the blackberry from book reading its pretty useless I never use it no cause of offence I can t Skype video calls my friends family need to have a playbook to call me ridculous if you look @ the samsung or the iphone, they all Skype for if other users don't have the same mobile phone they can even video call each other pc to phone or ipad to pc... etc.

  I posted this on your facebook wall and hope that nothing is done about it

  Blackberry question, why don't have an application like Viber or Skype where users who have blackberry as 9900 or the 9860 in which the two phones have front camera could Skype call or an application like viber in the blackberry users can call on voip... it is a reall fall in expected an app for blackberry for almost a year rang also edge to do something about IT... most users go for iphone so because of these two applications that maintains the connected in time video reall... enjoy some answer on this...

  looking forward to the bb 10 having these sucks simple features of daily use not having them so fustrating I think to spend 529 book just cause the 9900 t can support Skype and the playbook is not just the feel

  It is perhaps a question better directed to Skype and not HERE in the forums.  Skype has an application for BlackBerry, but it is only available to U.S. subscribers using Verizon.  (This information can be updated to date, it's updated information I have.)  Given that these forums are composed (not the right choice of words) of volunteers who love BlackBerry phones and not by RIM developers, your chances of getting the answer you are looking for may be thin.

  I hope that helps you.

• How do you manage your view Horizon 5.3 licensees?

  I just got the phone is turned off with the help of VMware discussing licenses.  I was curious to know how I can monitor the use of license after adding a license to display administrator.  I was told there is NO way for scabies, pull reports, or to check the use of the licenses in our environment from view.  Is this true?  Someone please tell me otherwise!  In vCenter Home > Administration > Licensing, you have everything you need to manage licenses in there then why is there no mechanism to do the same thing for the view?  To add insult to injury, the Tech was advised that if we on provision beyond our number of licenses who discovers will warn that jobs cannot be used until the licenses are added.  I don't know about you but I work in a very bureaucratic organization and would take time at least a week to buy additional licenses.  Thanks in advance for your comments!

  Support is correct on the first point, no way to track the licenses in the broker from the view and you can enter a license key that will unlock the feature.

  On the second, which is not my experience, never saw any restrictions imposed by the license key when it comes to number of users.

  Of course, there is always a risk that VMware is a license check to make sure you are compatible.

  Linjo - specialist EUC ex-VMware