Surveillance of the transmission rate of the network under Vista.

Similar Questions

• Connection to the network with Vista and Windows 7 computers

  A similar question was answered before, but it's XP computers I use Vista and Windows 7.

  I have a Windows 7 computer that is part of a home network and who also has a connected printer. I want to access the printer from a Vista computer that is also on the network. When I try to connect to the Windows 7 computer, I get the error "logon failure: the user has not granted the type of logon required on this computer."

  I've seen solutions have been when the system tries to access the printer was an XP system. Can someone help me with this problem?

  Thank you

  Jim

  Hi Jim,.

  ·         Is file sharing enabled?

  ·         You have disabled password protection?

  Try to check the Advanced sharing settings in the network and sharing Center. To do this, follow these steps.

  a. click Start, Control Panel and then click network and sharing Center.

  b. now, click change advanced settings for sharing.

  c. now make sure that file and printer sharing is activated on and protected by password sharing is turned off.

  You can also see the article for more information:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know the results.

• Computer laptop XP does not appear in the network of Vista laptop

  My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

  Can someone help me with this? Thank you so much in advance.

  Hello
  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• To access the files on the network under windows 8 from Vista

  I have problems to connect to the Windows 8 computer from the vista computer to access shared files and folders. I have Setup local users on the computer of Windows 8 for the other 3 computers in the office.  When I go to the Windows vista computer, and you try to open the computer of windows 8 on the network, it requires a username and password.  I give it, and he says that me the username and password are not valid. I tried using the whole installation of combinations of name and password user on the computer of Windows 8.  I have also went to the files, affected screen sharing folders that I want to share to "everyone" on the computer of windows 8.  I must be missing something simple; I have two Windows 7 computers, a computer of Windows 8 and Vista computer.  No other three computers can access files of windows 8...

  Hi Steven,

  The question that you are running in is better suited to the following Forum:

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  Thank you

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Cannot identify the network under Windows Vista

  I have windows vista SP2 and cannot connect to internet.  I see networks, but the computer is not able to identify.  I tried with several different networks, and the result is the same.

  Hi ClarkHayes,

  1. What is the error exact message you when you try to connect?

  I suggest you try the steps from the following link and see if that helps.

  In the Windows wireless network connection problems
  http://Windows.Microsoft.com/en-in/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• I forgot the password to the network under Windows 98.

  Original title:-bypass the password

  I have an old 98 Compaq windows desktop that I have not used for years. Its plugged in and I use the tower for Wi - Fi, but I use a laptop. My question is how can I bypass the password it asks when I can't remember it? It lights up then Compaq shows windows 98 screen then displays the screen with an image that I put on years before. with the PAST NETWORK ENTER password > username and password... when I got this 1 computer, I was a newbie and didn't know anything about them, I have do it I have written down on the book that accompanies it. There are no icons... and I have to click ctrl, alt, delete to turn it off. I have restore disks and I would like to restore it so I can use it.

  Hi Sudieq,

  Are you facing this problem under Windows 98? If so, please see the information provided below.

  Microsoft ended support for Windows 98, Windows 98 Second edition and Windows me on July 11, 2006. Because they are outdated and these older operating systems can expose customers to security risks. We recommend that customers who are still running Windows 98 or Windows Me upgrade to a newer, more secure Microsoft operating system.

  Check out the link:

  Windows 98, Windows 98 Second edition and Windows Millennium Edition Support ends on July 11, 2006
  http://support.Microsoft.com/GP/lifean18

  For more information about the issue, you can check the link:

  No Windows or the dialog box to start net logon
  http://support.Microsoft.com/kb/141858/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Hope this information helps.

• How to use the Explorer under Vista? Like in XP, I was able to change the 'view' of all the files that have been hidden.

  I want to change the view and see all the files.  Reason is to move files from one hard disk to another instead of doing the method of file transfer.

  Go to start / Control Panel / folder Options / view and scroll down and check the box to show the hidden files and folders.  In addition, uncheck to hide system files. In addition, uncheck to hide extensions of known file types (the last because it can be useful and worth while you're brings other changes).  Your problem should be solved.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the folders under vista copressed

  Some how I changed the properties of the files compressed, my options are limited to word, explorer, wordpad...

  What is the default properties for the compressed files?  I tried Explorer and when I try to open the existing file it creates an infinite loop.

  Fix file zip file in Vista go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select the Zip option in the menu and run it.  Who should restore the file associations default for Vista zip files.

  Here is a link to how to restore Vista zip file association: http://www.vistax64.com/tutorials/65254-zip-file-support-restore.html this should restore for compressed files zip file association and hopefully remove of open file (but which may take another measure).

  Here is another link on how to enable and disable the files compressed in Vista: http://www.vistax64.com/tutorials/93827-zip-file-compressed-folders.html.

  Here is a link on how to restore default binding settings in Vista: http://www.vistax64.com/tutorials/233243-default-file-type-associations-restore.html. This should also restore default associations of open files that include no zip.

  Between these three links, you should be able to restore files zip compressed file association and not with open files - indeed, return things to their default settings.

  Here are some additional links that may be useful if the three above do not resolve the problem: http://www.vistax64.com/tutorials/91920-unassociate-file-extention-type.html, http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-windows-vista-back-to-original-default/, http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/and http://www.winhelponline.com/articles/105/1/File-association-fixes-for-Windows-Vista.html.

  I hope this helps.  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite P200 - update of the BIOS under Vista x 64

  Hello

  I downloaded the update of the BIOS on the toshiba site (1.70 WIN). I can't run on Vista x 64.

  Is it possible to update my BIOS?

  Thank you very much
  Simon.

  Hello!

  > I have trouble running as she complains the PHLASHNT.sys driver.
  Sorry, but I don't understand what you mean. It's not clear to me.

  I downloaded the package to update the BIOS for your Satellite P200 (PSPBGE). It contains the setup.exe file and the file ROM.
  Extract the two files to a folder and run the installer as administrator.

  Good bye

• I can't open files tif on the internet under vista

  I installed microsoft document and image viewer and I can open the tif files in my hard drive, but I can't open the tif file that there has been a Web page by using internet explore. The program by default for tif is selected as document imaging Viewer and microsoft.

  http://support.Microsoft.com/kb/967055

  Read the article above to see if it is relevant to your question.

  Windows Photo Gallery opens .tif and Quicktime Image Viewer etc. does.

  Right-click on a .tif file and point to open with and click on choose default program, double-click programs, select Internet Explorer, OK

• You try to run the backup under Vista, error 800704 3

  My computer uses windows vista Home premium. When I try to run a backup I get error code 800704 3. I don't know what is this error, anyone know and how to fix it.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• How to recycle bin icon back on the desktop under Vista

  I sent things in the trash and I sent a lot, I lost the bin folder to recycle. How can I get that back

  * original title - I sent things in the trash and I sent a lot, I lost the bin folder to recycle. How to make it back *.

  Hi bryanlevine

  
  You can read the article below and check if the fix it or the steps help you resolve the issue.

  http://support.Microsoft.com/kb/810869

   

  I hope this helps.

• Email received by possible viruses now have junk folder on the desktop under Vista

  emails sent to me, my brother.  He said that it will not sent to them.

  fake email from a company that google has said was not a real email
  folders on my computer.  I remove and I had to do a restore
  * original title - what is hacking my computer, *.

  As others have mentioned, you can be infected. You must perform a full scan, it can be useful to run a malware scan as well to be sure.

  If you don't have an antivirus, you can watch in Microsoft Security Essentials, which is free: http://www.microsoft.com/en-us/security_essentials/default.aspx

  Note that some anti-virus programs will prevent or cause issues when you install an antivirus, in these cases, you can try searching for an online scan see if that can remove the virus before you install a full-time BC

  For suggestions of malicious software, see the following link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4d71-960f-b561798b7b42

  You can also inform your brother to do the same.

• How can I put shortcuts to programs on the desktop under Vista?

  I followed the instructions on this site.  I go to programs, then right-click on the program name.  The instructions say and then click send to.  But when I right click on the name of the program that nothing opens.  I can't click on send to.  Advice please.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/the-desktop-overview

  Read the info on the link above.

  See you soon.

  Mick Murphy - Microsoft partner