To access the files on the network under windows 8 from Vista

Similar Questions

• Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista. I shut down the computer?

  Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista.  I shut down the computer?

  Yes. Close and restart, the updates will catch up.

• I forgot the password to the network under Windows 98.

  Original title:-bypass the password

  I have an old 98 Compaq windows desktop that I have not used for years. Its plugged in and I use the tower for Wi - Fi, but I use a laptop. My question is how can I bypass the password it asks when I can't remember it? It lights up then Compaq shows windows 98 screen then displays the screen with an image that I put on years before. with the PAST NETWORK ENTER password > username and password... when I got this 1 computer, I was a newbie and didn't know anything about them, I have do it I have written down on the book that accompanies it. There are no icons... and I have to click ctrl, alt, delete to turn it off. I have restore disks and I would like to restore it so I can use it.

  Hi Sudieq,

  Are you facing this problem under Windows 98? If so, please see the information provided below.

  Microsoft ended support for Windows 98, Windows 98 Second edition and Windows me on July 11, 2006. Because they are outdated and these older operating systems can expose customers to security risks. We recommend that customers who are still running Windows 98 or Windows Me upgrade to a newer, more secure Microsoft operating system.

  Check out the link:

  Windows 98, Windows 98 Second edition and Windows Millennium Edition Support ends on July 11, 2006
  http://support.Microsoft.com/GP/lifean18

  For more information about the issue, you can check the link:

  No Windows or the dialog box to start net logon
  http://support.Microsoft.com/kb/141858/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Hope this information helps.

• Cannot identify the network under Windows Vista

  I have windows vista SP2 and cannot connect to internet.  I see networks, but the computer is not able to identify.  I tried with several different networks, and the result is the same.

  Hi ClarkHayes,

  1. What is the error exact message you when you try to connect?

  I suggest you try the steps from the following link and see if that helps.

  In the Windows wireless network connection problems
  http://Windows.Microsoft.com/en-in/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• Connection to printer on the network with a system from Vista to Winndows7

  Network of 5 computers 2 are on Windows 7, the rest under Vista. The printer on a Windows 7 machine is connected to all systems.  I can't get the Windows 7 machines to connect to the printer on a Vista machine? a mistake is 0x00000002

  I tried to link printers manually via a local port like nam computer\printer, this is denied.

  Any information will be helpful thanks

  This has nothing to do with Windows Update. Please post here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• After the upgrade to Windows 7 from Vista, I lost the previously loaded Fund games

  I recently downloaded Window7 on my PC.  Download Afthe was complete, I played games that were on my desk from the previous OS (Vista).  I have the next day got up and played them again and took off.  Upon my return, all games had disappeared from my office and cannot be found.  The only ones left are a compilation of classic board games from Microsoft.  The games I lost were; Free Cell, hearts, Solitare, Spider Solitaire, Minesweeper, and failures.  The question is: "How do they return?

  Original title: recovery lsot games

  Hi Richard,

  Thanks for the post. I understand that you have lost the default Windows 7 games like Solitaire, Minesweeper and etc. All changes made to the computer before the show?

  The games you mentioned are by default Windows 7 games and these are features of Windows 7. You will need to access the Windows features and then turn them on. Check out the link and follow the steps.

  Where are my games?

  http://Windows.Microsoft.com/en-us/Windows7/where-are-my-games

  I hope this helps to solve the problem.

• Cannot access the network ERR_NETWORK_ACCESS_DENIED

  I have Windows 7.  Nothing works, I tried chrome (which will not even load) and Firefox (it has been a constant problem with gmail for well over a year).

  Cannot access the network

  ERR_NETWORK_ACCESS_DENIED
  Google Chrome has access to the network.

  Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.

  Chrome allow access to the network in your firewall or anti-virus settings.

  If it is already listed as a program allowed to access the network, try to remove from the list and Add again.

  I tried the above, but can't seem to solve the problem.  Thank you.

  Hello Paul,

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  The same problem occurs when you use Internet explorer?

  Thank you for details on the question and your efforts to resolve.

  If the problem also occurs when you use Internet explorer, I suggest you use the steps in this article and check if it helps.
  Reference:
  Can't access some Web sites in Internet Explorer
  https://support.Microsoft.com/en-us/KB/967897

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also see this article:
  Understanding Windows Firewall settings
  http://Windows.Microsoft.com/en-us/Windows/understanding-firewall-settings#1TC=Windows-7

  Note: Firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not turn off your antivirus software and firewalls. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software and firewall are disabled, your computer is vulnerable to attacks.

  To get help on Google chrome, I suggest you post your question on Google chrome forums.
  http://productforums.Google.com/d/Forum/chrome

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows XP sp3 can not access the network shares on vista after installing sp2

  I have a xp sp3 computer and another currently running vista Home premium sp2. Previously, I was able to access the network share on the xp computer before vista computer I installed sp1. Both computers were able to ping between them without problem.

  I've upgraded to sp2 because I had problems with windows media center, missing records. Upgrade of these issues fixed, but this means that roll back to sp1 is not an option for me to get operational network.

  Please do not post a standard answer on the network configuration. I am familiar with the standards requirements to share files between xp and vista and everything is set up correctly.  Like I said everything was working fine before the installation of sp2.

  If it is a known problem that is still not resolved, I'd appreciate knowing that information as well.

  Edit: Firewall been disabled during my troubleshooting

  After more work, I was able to solve my problem.  Update zone alarm solved my problem and helped my windows xp machine to access my Vista network shares.  As I pointed out in the original post, zone alarm firewall has been disabled during my troubleshooting.  Apparently, when disabled, the old version of zone alarm has always been the origin of the problem.

• Must be able to access the network WPA PSK

  Hello

  I just got my laptop Satellite Pro L300. I have a sky broadband wireless router in my house and it works with my computer and my laptop roommates but not with the Satellite Pro.

  Phone heaven Support and they told me to tell you that my laptop is not recognising non secure networks and I should be able to access the network WPA PSK.
  What should I do?

  Kind regards

  >.. .but not with the Satellite Pro.
  Does that mean exactly?
  You see that this guaranteed WLAN?
  Can you put WPA password to have full access or what?
  What exactly happens?

• to access the network of vision builder error

  to access the network error VBAI

  It used to work yesterday but idon't know why not today

  So, you have problems writing to a published network shared Variable? You might be able to solve this by using the software manager system OR distributed. By using this software, you should be able to see all the network published static Variables that are hosted on this computer and all other computers on the network. You can try to modify these variables using this software. If you have the same problems with the variables shared by using this software, then this probably means that there are problems with the network in general as a firewall blocking the communication.

  You can check if you have this by navigating to start > all programs > National Instruments > Distributed System Manager. If you do not already have it, you can download it here: http://www.ni.com/download/ni-distributed-system-manager-2013/4216/en/.

  This knowledge base article may contain useful advice on how you might approach this problem: http://digital.ni.com/public.nsf/allkb/6E37AC5435E44F9F862570D2005FEF25?OpenDocument

  Good luck

  Jeremy P.

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• "Could access the network location:.."

  I get the "could access the network location:. «error with installing and uninstalling of programs, i.e. iTunes, Quicktime.»»
  I checked the Internet and found registry patches, but they have not worked for me. I tried the Fix It program in one of the solutions, not good.  I also stop my firewall and anti-virus and tried to install it that way. no go.

  I have Windows XP, SP3

  any suggestions?

  I thought about it... have an external hard drive which I usually turned off when the use not. I tried to install everything with it on and it worked.
  Thanks for your help

• Can I cache of RADIUS credentials used to access the network devices?

  I would start by RADIUS to authenticate users who try to access the network through virtual private networks devices. Since we will need to access the equipment in the case of a VPN does not, I need to know if the credentials may be cached on the device.

  You mean devices are accessible once you have set up VPN. Failure VPN, you can even ping the network devices. I am assuming that they would be internal resources. In all cases, credentials may not be cached on the device. Let me know if I am missing any room in your questions. ~ Jousset

• Unable to access the network using Edimax N300 universal Wi - Fi extender

  Original title: Edimax Extender will not get internet access

  I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet.  They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network.  EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either.  Anyone with any ideas would be appreciated.

  Hi Gofchap,

  Thanks for the question of validation in Microsoft answers community!

  I imagine the frustration you feel when you are unable to access the network.

  The problem may be because of the Extender, diverter, or with the network adapter.

  1 did you do changes on the computer before the show?

  2. do you receive any error messages?

  3. What is brand and model computer?

  4. have you tried to connect without using the extender?

  I suggest you to visit:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.