Svchost.exe error application at startup of 0X7c91b21a memory could not be written 0x00000010

Similar Questions

• SVC.exe error Application 0x7e91b21a @0 x 00000010, memory could not be written

  When I start my computer. I get an error message.

  SVC. EXE Application error

  This is a popular remedy:

  It seems that the last update for Windows Media Player may contribute to this problem when the system is Windows Driver Foundation active and running.  Unless you use the Windows driver FoundationService, deactivate it.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework service, right-click on the service, select properties and choose disabled and OK your way out of the Services Applet to save the change.

  Restart your system (the WDF Service is now disabled) and check your failure condition now.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Svchost.exe - application error - the instruction at 0x7c919af2 referenced memory at 0 x 00000010, that memory could not be written

  Windows XP Professional and service pack 3 to have also internet exploror 8 install_ at startup I get this error message - the instruction at 0x7c919af2 referenced memory at 0x00000010 the memory could not be written

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/svchostexe-application-error-the-instruction-at/700e7092-7359-E011-8dfc-68b599b31bf5

  http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-message-on-boot-up-svchostexe-application/a1d7a2c2-2a9b-4145-A149-04ac389c0ffa

  Click on these links for possible solutions to your problem.

  Also, check out the related discussions, below your question.

• Svchost.exe 0x7c919af2 referenced memory at 0 x 00000010 memory could not be "written".

  It appears each time I start my computer: svchost.exe 0x7c919af2 referenced memory at 0 x 00000010 memory could not be "written".

  Then a total of 3 BACK Windows pop open, titled in reference to MSE, which close shortly after.

  Code title: original error: 0x7c919af2
  And then my Firewall is NOT on.

  It started a few days, after having spent a lot of time and effort trying to run after failed installs updates for .NET framework. It is unclear what I screwed up.

  Using WIN XP Pro SP3.

  If you mean you see messages like this:

  Svchost.exe at startup
  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".
  The instruction at "0x7c91b21a" referenced memory at 0x00000010 ".
  application 0x7c91b21a error 0x00000010
  The instruction at "0x7c928fea" referenced memory at "0x00000010". The memory can not be "written".

  Why isn't your firewall on?

  This is a popular remedy for this situation:

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• Application error the instruction at 0xf8c26840 referenced memory at 0x8fbb4cb cannot print. the memory could not be written.

  I could not print so I tried to install a new printer having the same problem, I even used the HP disk error I get when I try to print is splwow64.exe - application error the instruction at 0xf8c26840 referenced memory at 0x8fbb4cb. the memory could not be written.

  It is a problem of HP.  It is not a Windows problem.

  Good luck.

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• When I close Wordpad I get this error: "the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". »

  Every time I close wordpad in XP I get the same error message 'the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". "

  When I click OK to close this dialog box comes another upwards, back to "the instruction at 0x7c910a19 referenced memory at 0x01c801c0. The memory could not be "read". "

  I don't have any idea what is wrong. I tried to remove and reinstall wordpad but that did not help.

  original title: Error closing wordpad

  Hello

  Disable DEP (Data Execution Prevention) for Wordpad and see if it helps.

  a: Click on Start > run

  b: Type Control Panel in the Run dialog box and click on enter.

  c: then click on System , then Advanced System settings.

  d: then click on the settings button under Performance.

  e: Then click on Data Execution Prevention tab.

  f: Now select the option " turn on DEP for all programs and services except those I select. "

  g: now click Add , and then select Wordpad.exe

  h: click apply , then ok.

  Hope this information helps.

• Memory could not be written error

  Can someone help me with this error. It is when the Windows loading finishes, when you open my computer, and when you use the drop down to get a file.

  "the instruction at"0x00db5759"referenced memory at"0x00000000". the memory could not be written.

  Thank you

  b_bucky

  I had the same problem.  I got it back up to my HP printer driver installations.  I found this solution 2, step 1 of this HP link worked for me.  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00273968 .   Try to replace window Image Acquisition service automatic to manual.  See the link for instructions.

• Error message: the instruction at oxo5e32570 (or0x05e32570) Ref. 0x0000006c memory could not be written. -What it means and how to fix it?

  Appear when I restart and shut down my computer

  Hi Gary,.

  This error is pretty generic, and can have several causes. However, this is a potential resolution to your question, which is an article that deals specifically with this issue. The link also includes a fix.

  "Error message when you try to shut down Windows Vista:" education to... the memory could not be written "

  http://support.Microsoft.com/kb/937381

  Hope this helps and let us know how it works for you,

  Steve <> Microsoft Partner

• Explorer.exe - "education to 0x084e0fd8 memory 0x084e0fd8. the memory could not be written. Click OK to terminate the program"

  I have a problem, sometimes when I'm with my computer. the cursor is just loading and a pop-up window appears which says: 'the statement in memory of 0x084e0fd8 to 0x084e0fd8. the memory could not be written. Click OK to complete the program'... after clicking the button, the screen turns blue and goes to normal... I don't know where this problem came. you have an idea about this? Please help me.

  Hey Rey,

  Thanks for posting your question on the Forum of the Microsoft community.

  The 0x084e0fd8 error code is a memory location that the computer would have attempted to access when you received this error. This can occur because of a corrupted file or a bad sector.

  I suggest that you can run a disk check and see if we can find no fault with your hard drive. Please see the article below to run the chkdsk command.

  
  Run the check disk from the command line to find and fix errors
  http://TechNet.Microsoft.com/en-us/magazine/dd637756.aspx
  Note: Please press Windows key + R, type CMD , and press enter to launch the command prompt.
  (Use chkdsk /f , followed by chkdsk/r)

  Hope this information is useful. Just reply with the results and if you need help or have any other questions about Windows, we're here to help.

• At startup I get this error Message = "error in svchost.exe - application instruction to memory 0x7c919af2 who 0x00000010.the memory could not be written."

  Windows XP

  At startup I get this error Message =

  Svchost.exe - application error the instruction at 0x7c919af2 memory 0x00000010.the memory that could not be written.

  What should I do about it?

  You don't need to "try" things - you need to "do" things:

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• Keep getting a memory could not be written error with Acrobat Pro XI

  Hello

  Below is the error I keep seeing on my windows 7 Adobe Acrobat Pro XI enforcement machine. It happens with any PDF that I opened and when it pops up it force closes xi pro adobe acrobat and does not allow me to save all data before it happens. In general, it gives me 20 seconds before it closes so if I am fast enough I could save it, but it does every 5 minutes or more.

  

  Things I've tried...

  1 tried to use the cleaning of adobe tool to uninstall acrobat adobe pro xi completely from the computer, rebooted, reinstalled (same error at the same place)

  2. tried using forefront endpoint protection for not full system scan (what we use in our company) - no viruses (same error at the same place)

  3 tried to delete the user profile that has the question on our machine of the company, the addition of a new blank profile with acrobat (same error at the same place)

  4. I tried to reinstall windows (wipe everything) and reinstall acrobat (same error at the same place)

  5 tried to run memtest for my RAM and RAM integrated test tool, no error on RAM (same error even location)

  6. replace the RAM and motherboard in case there was a problem of memory onboard (same error even location)

  7. now, I gave the user a ready computer, same configuration and it works fine. No other program gives this error, but Adobe Acrobat Pro XI, and now I have a second user with a new laptop Dell get this error at the same place.

  We have a lot of users on the site using Acrobat if it was only 2 of a possible 3 k users having this same exact error, so don't know why it does on 2 completely different computer types. Any suggestions would be most useful at that time I tried registry fixes, changes to "memory could not be read error" but that does not help that I found on this forum.

  Thank you!

  -Troy

  Hi Troy,

  I see that you have completed the major part of the basis of troubleshooting.

  Please contact support for more advanced troubleshooting.

  Contact the customer service

  Kind regards
  Rave

• SVCHOST. EXE - Application error the instruction at "0x001a61bb" referenced memory at "0x00000000". The memory could not be "written".

  I have a computer running Windows XP (sp 3) and received the above error message.  When I first start the computer, I got the following error message "Generic Host process for Win32 has encountered a problem and needs to close."  When I select the 'debug' option, I get the SVCHOST. EXE error message.  I tried to restore to a previous point, which did not work.  I ran Malwarebytes and Spybot, both find elements but it has not fixed the problem.

  Once the error is generic host comes up, I can't run any programs loaded on the hard drive.

  Download and Save Malwarebytes Anti-malware (MBAM). Click on the button download free version.
  Download and Save TDSSKiller . Please read the instructions on how to make it work on this page, too.

  Boot the system using the safe-
  1. Restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. Select Safe Mode with network when theWindows Advanced Options menu appears, and press ENTER.
  3. When the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then pressENTER

  If there is only a single operating system installed then it will start to it after choosing the Mode without fail at step 2.
  If you can get the system booted without failure, first run TDSSKiller.exe.
  Please tell us if it detected and deleted something.

  Install MBAM now and allow update when installed. Here's a good tutorial, short on the use of MBAM.

  Once it has finished installing, select perform Full scan.
  When the scan is complete click OK on the window that appears, and then click show results, which will open the scan log.

  Back to the MMFA click on Remove selected. Don't forget not that all detected objects are checked.
  Once MBAM has attempted to delete the detected objects it may prompt you to restart the system.
  Do it in normal Windows mode and see if you now have control over it.

  Expert MowGreen Windows IT Pro - consumer safety

• scvhost.exe - Application error: the instruction at "0x00de96bc" referenced memory at "0x00000000". The memory could not be "written".

  This error occurred when while previews of image were loading in Win Explorer & Win Fax & Image Viewer... Here are the data collected in the event viewer:

  Event type: error
  Event source: app error
  Event category: (100)
  Event ID: 1000
  Date: 2010-11-09
  Time: 20:51:15
  User: n/a
  Computer: DBTOA000
  Description:
  Failing application svchost.exe, version 5.1.2600.5512, failed module unknown, version 0.0.0.0, address failure 0x00de96bc.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2nd 35 35 31 32 20 69 0.5512 I
  0030: 6e 20 6 6 75B 6F 6f 77 n unknow
  0038: 6 20 30 2e 30 2e 30 2nd n 0.0.0.
  0040: 30 20 61 74 6f 20 66 66 0-off
  0048: 73 65 74 20 30 30 64 65 set 00de
  0050: 39 36 62 63 96bc

  From what I can tell, this seems to be a low-level problem in the registry... If someone can please tell me how I can locate it?

  Hi Wesley,

  You can download & run the Diagnostic Windows memory from this link and check if the problem persists.

  Windows Memory Diagnostic

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message at startup! Svchost.exe - Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". The memory could not be "written".

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  by http://www.bleepingcomputer.com/forums/topic261076.html

  1 - Go to control panel

  2. Administrative Tools

  3 - services

  4-go to the following Service: (Windows Driver Foundation - User - mode Driver Framework) right click, then choose Properties---> in the startup type select disabled.

  5. restart the system.

  It fixed for me.