swap in the stackorder project characters

Similar Questions

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Does anyone know if you are limited in the number of characters in the text field?

  I have the scrolling text of the distant rear side right up to the edge on the left front. I only get to halfway through the message of full text and letters are mixed at the any end. is there a limit on the number of characters I can use? Is there a setting a limitation I can increase?

  It seems to be. I figured it at approximately 16000 characters more or less (or even lower). (Estimated from the original character TextEdit limit as it seems to be this type of core service text text handling in movement and FCPX.)  I drew this conclusion during the development of a method to create a movement subtitles. It finally turned out that I had to cut the scripts into pieces 'chapter of size' to keep the character countdown. I never got to finish this tutorial and it has been quite some time now (and I can't not find my notes on the subject). It could be that the number of characters estimated is actually lower.

  There is no way to reset the limit.

• Combine the two projects into one

  I know it is a very popular question and I read many answers excellent previous answers.  The two most popular procedures seem to be simple copy - paste and use clips of compounds with copy / paste.  CPF has improved this process over the years and I ask the question again to get the benefit of current thinking.   I have an iMac (mid-2011) OS X 10.11.4 and FCP worm 10.2.2.  I have two separate events within the same library.  There is a completed project, with all the transitions, effects and music, located within each discipline.    Current ideas on how to combine these two projects into one would be greatly appreciated.

  Thank you.

  Copy and paste is the only method I know.

  Open the project in the timeline first.

  Open the second project in the timeline panel. Only one project appears at the same time.

  Select an item in the timeline and press command + A to select all, then control + C to copy.

  Use the project navigation arrows to return the first project:

  

  Move the playhead to where copied clips must be glued and press command + V.

  Al

• Where is the iMovie projects folder on the new iMovie 10.1.1 App?

  I'm going through a project for a new Mac iMovie folder (with all the latest news app) on an external hard drive so that I can give it to a friend to change. I type in the iMovie projects in my search for spotlight on Finder and it does not appear. My old mac computer doesn't have this problem. It appears in the older Mac. My new Mac using iMovie version 10.1.1 and my old iMovie 10.0.5. Does anyone know of a solution on what I should look for or how to find it?

  -Justin

  iMovie 10 has more iMovie and records events iMovie projects.  Everything is inside a package with the .imovielibrary extension.  Its default location is the users / < username > / films.  For more information, see: http://help.apple.com/imovie/mac/10.1/#/mov3fa25bae7

  If want to use it on another computer, the computer must use the same version of iMovie.  If you are using media from another library (for example, Photos, iTunes, etc.), you will have to "consolidate the library first.  See: http://help.apple.com/imovie/mac/10.1/#/mov882dee351

  For more details.

  Geoff.

• HP 7210 all in one - will not be printed on the fast project configuration

  For the last two weeks, my 7210 HP all-in-one has decided that he does not want to print on quick project more.  I have the default settings of the printer on quick project, and I even went and edited individual documents to ensure that they are on the quick project, but it still prints on quality.  I do a ton of printing on a daily basis, and that is to kill my ink, not to mention how long it takes.  My OS is Windows 7, 64-bit.

  Hey @kmh1883,

  Thanks for getting back to me on this subject "fast draft" with your HP Officejet 7210 all-in - One Printer. Even if printing HP and doctor Scan found no problem, it seems that you may have a driver conflict. I would like to try another driver at the moment to see if this clears up your printing problems.

  How to add another driver:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Officejet 7210 and left-click on properties of the printer
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit next complete the new driver Wizard
  10. Under the printer properties window, select 'Apply' but do not hit OK
  11. Select the general tab
  12. Rename your printer in HP Officejet 7210
  13. Click OK
  14. Finally, right click on your HP Officejet 7210 one more time and left-click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its project of Fast
  17. Press apply and OK

  Test print from the print driver Deskjet 9800 replacing to check if the setting "Fast Draft" remains.

  Please let me know if this solved your problem. Good luck!

• How can I replace a source element without having to redo the iMovie project?

  When exporting an iMovie project, I detected that a source element had bad images and export could not comlete (error 10008). I fixed the file and replaced it within the overall project. But after that iMovie refuses to play this clip during the opening of the new project - it shows an exclamation point in the chronology and the message "the clip has changed."

  Is there a way to replace an element in the project?

  A few facts:

  • The clips are AVI containers
  • I used Yodot AVI repair to remove the bad images
  • The repaired file use the same as the original codecs
  • version of iMovie: 10.1.1

  Yes.  With the Finder, drag the clip fixed everywhere where it is saved until it is placed on the old item in project.  When a green plus sign appears next to the cursor let go of the mouse button and you will get a menu.  Click "replace".  The duration and all connected titles, glitches or audio should not be affected.

  

  Geoff.

• Why a few recorded tracks "empty" when I opened the Garageband projects on another machine?

  Hey

  I have just updated my laptop to be able to run the same version of GarageBand on my iMac and MacBook (OS X El Capitan and GarageBand v.6.0.5) and work on projects of GB on what that machine is available.

  I just tried to open a few GB on my MacBook projects (both were created on my iMac) and the recorded vocal tracks are "empty", as below.  The track from the top (purple) is any wav. file and the blue trace below is the vocal track, although it says "file not found".

  

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.  Or I make a stupid mistake?  It's really quite likely, but any help is very welcome!

  Thank you

  Rich

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.

  The problem could be the DropBox synchronization. DropBox is ideal for simple documents, but your GarageBand projects are files with databases and multimedia files inside. Synchronization can break the connection between the media files and internal databases.

  If you want to transfer projects with Dropbox, it is safest to compress the projects and move to archive compressed to dropbox.

  But see, if the media are still inside the Garageband project. Perhaps the download was not complete.

  • CTRL-click the .band file and select "Show Package Contents".
  • In the Finder window that opens, select the "Media" folder
  • Copy the audio files in this folder to a folder on your desktop.
  • Try to identify the missing audio file.  If you can find it, drag it to the track where it is absent.

• Bezier Motion 5.0.7 masks appear in the timeline panel, but in the column of layers only. This started happening yesterday. The query projects previously do not have this problem. I can't change if masks appear in the timeline panel.

  Motion 5.0.7 memory 8 GB, processor 2.93 GHz intel Core i7, ATI Radeon HD 5750 1024 MB graphics

  Bezier masks do not appear in the timeline, preventing me from editing. The masks appear in the column of layers only. The problem just started yesterday. The query projects previously do not seem to be performed.

  In the upper right corner of the canvas, there is a view menu. Check if the 'lines' are checked in the section view overlays.

• No sound when you export the missing project like HD (AAC codec) video

  Hi there everyone!

  I am facing a problem when you try to export a finished project to iMovie as a HD video, no sound!

  Here's the scenario:

  MacBook Pro (mid 2010), OS X El Capitan free 10.11.2, around 90 GB of space on the hard disk, iMovie ' 09 (Version8.0.6)

  The project is finished in iMovie, ready for publication in HD, when I saw it there, no problem with the sound. However, as soon as I try to export and select HD output quality, the .mov file will open without playing a sound in Quicktime format. If I select "large" inferior quality, it gives me a sound .m4v file. Even when I select "export with quicktime" and manually select the audio options (AAC 256 Kbps) the final version will have all the sounds.

  A few months ago, I've been working on another project, it also exported in HD. When I check the first export view of the current project file information, it will say "Codec: H.264, AAC" size «1280 x 720, "when I export the current missing AAC while having the same dimensions.»

  I'm really not an expert on these matters, but I tried to look for some option in iMovie, no luck. Maybe someone had a similar problem or knows why it does not work. I would appreciate help.

  Thanks in advance!

  I was FINALLY able to get 1080 p with its new output using the following parameters:

  

  I also HAD to define the file manually to .m4v extension before hitting SAVE as iMovie he left .mov (and it has not yet worked the first time he encoding with the .mov file extension).

  I don't know what the latest update messed up in iMovie, but I've NEVER had a problem before the video release.  I hope that they get it fixed!

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album so I can use this set in the future?

  My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album and the book so I can use this set in the future? All the commands I want to use are grayed.

  Using Photos of Apple.

• The analysis of the non-numeric characters in a string

  Hello

  I am communicating a robot to LabVIEW (2013) via TCP/IP and sockets. The robot is the server, and LV is the customer.

  I start with the target data in this format (in a string):

  "[0 ~ 100 ~ 0] ~ [0.96593 ~-0.25882 ~ 0 ~ 0] ~ [1 ~ 0 ~ 0 ~ 0] ~ [150 ~ 50]."

  [X, Y, Z], [Q1, Q2, Q3, Q4], [C1, C4, C6, Cx], [TCPVel, OrientVel] except replacement ',' (comma) with a ' ~ ' (tilde) because I load the target data in a spreadsheet which is a comma-delimited file.

  In LV, I take this string, the analysis of the chain and split individual items. I then pulled the singular elements as unique, 32-bit of real numbers. I take each one and convert them individually to a string, concatenate them and send them to the robot. The robot decompresses these raw bytes individually and converts them to a target of robot (position in space).

  I train (BT) check if the user has sent a bad character (non-digital) in the target data. Example of this is:

  [- 50 ~-150 ~ 0] ~ [0.96593 ~-0 ] [B2has5D882 ~ 0 ~ 0] ~ [1 ~-1 ~ 0 ~ 0] ~ [150 ~ 50]

  Now in BT, when I'm scanning the chain, these bad character becomes the entire element to zero and everything else then to zero as well. See attachment for example screen similar.

  My question is, my VI, I can analyze all non-numeric characters (that are inside the parentheses and characters that are NOT a ' ~ ' (tilde))? In this way, I can always get this item numbers and do not have this element or other items turn to zero?

  Thanks in advance for any help!

  Sorry for the question of the test

  SM

  
  

• Remove (without the appellants) project dependency

  The Labview project is not allowing me to remove a dependency file (driver instruments) who has no callers, even if I have relinked all my files from project in the instr.lib folder. I have a dependency file something like "Agilent MXA series...". "located on the C:\somefolder that persist in the project files. This driver file has no callers, I have relinked all the project files in the folder LV2015\instr.lib instead. I take more than a prior work, so I created a project to build a copy of existing VI files to a C:\somefolder\driver-folder. Rich J

  It will not be the only incorrect dependency. It is part of a project that is to load into the current project as a dependency.

  Drivers should never be included in a project. They should always be addictive.

  Mike...

• to limit the input in the xcontrol string characters

  Hello

  I followed an example online at deveope an xcontrol for the input string, but limit the input only characters for capital letters from A to Z. I have the main code as follows

  

  In the key to the bottom of the event, I throw all input character with the ASCII beyond [65, 90]. Sounds works but if I continue to press a prohibited (e.g. %), it will show that the key in the control. So, how can I ban the entry by a long press on a button? Thank you.

  Maybe including an event ' key repeat? It will handle the case when a character is added when the user holds the key. I think that you will just need to copy the code in the event "button down?

  Jeremy P.