'Switch' - what is the meaning of an active State or ensure the blades?

Similar Questions

• Diagnosis copper wire test on SG200-26 Gigabit Switch - what is the "open cable" telling me?

  I have installed a Switch Cisco's Gigabit SG200-26 to the installation of the client.  They have a severe latency on their network, so I was hoping the switches capacity could help me track down the problem with the statement.  There are 7 computers in white box on the switch.  Six computers have been sold at the same time and have the same motherboard.  A computer seventh was sold a few years later, and has a different motherboard.  All computers have the NETWORK card on the motherboard.  All seven computers come with ' Open Cable - cable is connected on one side "when the analysis of the copper is run under the Diagnostics tab.  Each test has an inclination of NS 8 pairs at least three reports four sons.  A router, server Dell, Cisco wireless router, used only as a point of access, an old computer (about 10 years) and a small Netgear switch good show all in the analysis of copper.  Each node is except the switch Netgear gigabit speed and the old computer.  None of the ports that are attached to the computers display errors.

  Thinking that maybe the wiring of the installation is all bad, I took a computer to the switch and connected a connecting cable of known network and in a good 5' from the computer to the SG200-26 Gigabit Cisco Switch and then I did a test of copper.  The results were the same - "Open Cable - cable is connected on one side.

  I am completely confused by all this.  First of all, what exactly does "Open Cable - cable is connected on one side?  These computers can access the Internet and the server and sometimes seem to have hours of access to resources, so I know both ends of the cable are connected.  And what is the inclination was trying to tell me?  Is it possible that all 7 computers, which are Windows 7 32-bit and a couple of 64-bit operating systems have a driver problem?

  Help here would be most appreciated.

  Hi txlmbardi_2,

  This really should not conduct so please open ticket with Cisco Small Business Support team to deepen this review:

  http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-suppor...

  Kind regards

  Aleksandra

• Cisco 1252 s with regular 802.3af PoE switch - what are the impacts?

  Does anyone have an experience of real life to the deployment of the 1252 s on 802.3af regular PoE switches?  I have a few 1252 s a certain ports PoE 3560 and issuing upward with alarms 'low power '.

  I wonder what the impact of the real world with this scenario.  The 1252 s have both 2.4 Ghz and a radio-5, 0 Ghz in them and I have HT enabled on the controller.

  I wonder what capabilities I lose by running on 802.3af food in addition to the inconvenience of the alarms.

  Thanks in advance!

  Hello

  This is the command question... the AP 1252 switches POE needs improved Ex-3750-E for all operational radios... If we use only a 802.3af while a single frequency can be enabed and her we can't get a rhythm N... the link below will explain better...

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps6973/ps8382/product_data_sheet0900aecd806b7c5c.html

  I would like to know how it works for you!

  Concerning

  Surendra

• What does "The Active Domain Services is currently unavailable" mean?

  I try to add the PrimoPDF virtual printer driver for my HP laptop.   When you install the software I get the following error msg.

  Cannot install PrimoPDF - PrimoPort printer:-PrimoPDF: (1797).

  When I go into Word to try to add the printer driver, I get the error:

  Active Domain Services is currently unavailable

  -What it means and how do I install the driver virtual while I have this available in various programs printer driver?

  I am running Windows 7 Home Premium 64 bit and have Office Professional Plus 2010, Control Panel also displays Office 2010.  Maybe I have two copies of the installed office and that's the problem?

  Help!

  Tim

  Hello

  1 - is the problem confined to the word?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the laptop?
  4 is the computer connected to the domain?
  5. is the printing device listed in the list of devices and printers?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  You can check out the link and check if the printer is correctly installed.
  Install a printer
  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

  Check the link to find and install the printer drivers.
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 4:
  The clean boot computer and verify if you are able to install the printer.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

• What is the meaning of the colors in the business plan?

  I used the Apple Watch 2 series for the first time during jogging. IM wondering what is the meaning of the colors that appear in the map I've seen since the implementation of the activity in the report of the training session. Anyone know?

  Hello

  Line color reflects your speed (green being faster, the Red being slower).

• Small color wheel keeps going in a lot of time and activity stops.  What is the problem and you have to?

  Chromatic wheel keeps going of and activity stops.  What is the problem and the solution?

  You meet the SBBOD (the spinning beachball of death).

  This means your MBP is trying to make his way through some task or tasks that he doesn't have sufficient resources to effectively or if you have a software problem that interferes with the efficient completion of the task (s). Common causes on this discussion:

  1. "antivirus" software from third-party manufacturers
  2. different types of cleaners 'misguided' and other dreck (for example, CleanMyMac, MacKeeper)
  3. trying to run too many processes for the hardware you have.
  4. Insufficient RAM for the processes that you try to run
  5. Hard drive that is too full
  6. CPU or hard drive that is too slow for the software you are trying to run.
  7. hard drive that is running out.

  Download and run Etrecheck http://www.etresoft.com/etrecheck and send the output to an answer here, and we can take a look and see what the problem is.

• Your version of Intel Active Management Technology is not compatible with this version of Windows. What does this mean?

  my pc is hp compaq dc 7800 small form factor.

  I installed win vista Business 64-bit

  After installition, I get this message

  "Your version of Intel Active Management Technology is not compatible with this version of Windows."

  What does this mean?

  Thank you

  Hello

  I suggest you send the question in this forum and check if it helps;

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup

  It will be useful.

• What is the serial key and activation key for Microsoft professional win7 64 bit?

  Original title: WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT.

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  You will need to buy a license to activate this copy of Windows 7 Professional. It doesn't have a product key, you will need to have that already.

  You can even buy an edition much cheaper if you like Home Premium, since it will be for domestic use.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

• Why timelines in Active AND inactive what is the purpose?

  Insert a button box or click on and the object appears in the panel mounting with an icon pause in the middle. On the left, the subject is active and inactive right.

  What is the possible purpose of adding something that is not active?

  The object can be modified to be active for the duration of the timeline required - in order to drag the object in the timeline as needed and no need to add a little more for inactivity (useless)

  Am I missing something here?  Can I do a button - then inactive - active assets then again along the timeline?

  Yes I am new but this logic fails me, unless there is some use or better yet, it can be changed to ' all the assets "when placed

  A click box is by default invisible to the user, never inactive a period as you say. The suspension with a click box, always at the end of his timeline, which means she is always active for its entire duration.

  A button, a button of form (and a text entry area) are visible to the user. In the default configuration, they stop to 1.5secs regardless of the duration of their chronology. Before the point of interruption, they are active. What happens when the button is clicked, is defined in its success (or as the last attempt for a valid BER) action. If you decide that the head of continuous play, the shape of the button/box/TEB will not disappear, but they will be inactive. As long as you do not release the playhead with this action, the user can use the object again.

  You can change the time of the break in the distribution panel, or by dragging the thin vertical line on the timeline. I'm perfectly happy with the current situation, because I have total control over what is happening. The limit is that you can have a single asset and inactive a period, because there is only one suspension point possible.

  You want to add this link if you want to learn more about the timeline. I should update (when I have time) because Captivate 9 effects timelines are integrated within the timeline of the slide.

  Small timeline Tidbits - Captivate blog

• activate my membership and paid for it as well, but the creative cloud app shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been

  I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...

  Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].

  
  

  
  

• I have a subscription for photography (photoshop/lightroom) after a few days of testing, but the window of my creative cloud always tells me that I have 25 days to test and he should buy photoshop. What does that mean?

  I have a subscription for photography (photoshop/lightroom) after a few days of testing, but the window of my creative cloud always tells me that I have 25 days to test and he should buy photoshop. What does that mean?

  Hi Kai,

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  However, the Adobe ID on the forums has no active members under him. Please confirm the other Adobe Id under which the subscription can be.

  
  

  Kind regards

  Sheena

• What is the meaning of "Point of dehydration."

  Jin
  
  What is the meaning of 'Point of dehydration' to the BPEL process.
  
  Thank you
  Yatan

  in fact... point of dehydration means that the bpel process has reached an activity of dehydration, or at the end of the process. BPEL considers that dehydration following activities: RECEPTION, PICKING, WAITING and HUMAN TASK (which is actually a set of activities with a RECEPTION included). You can realize that this activity is those that might take a long time to complete (in fact even the days, weeks, or months)! then you don't want basically all instances of that type into your memory then bpel recorded the whole process in the database (or dehydration store) and release the memory that was used by this instance of the bpel process. Then, when a reminder or something is received, the engine Gets the instance of the database and loads it into memory.

  She's the one :)

  HTH,

  Andres

• The name of my email in thunderbird now has a display of Paddle lock on it. What does that mean? Can I go there?

  When I open thunderbird and get connected my Email at the top of my thunderbird email address name has a Paddle lock on it. What does that mean? Can I go there? I use a VERIZON email address. On the last 2 days I did not have down load one of my incoming emails. He keeps asking me my password I type in and then he said: its incorrect. After you return my password, I get an error message says 0012 # incorrect password. Is thunderbird is or has happened since the new update for version 31.1.2? I need help.

  The padlock indicates a secure server connection. You don't want to get rid of it.
  Please check with Verizon if something has changed on their end.
  https://support.Mozilla.org/en-us/KB/problems-sending-and-receiving-messages

• What is the meaning of the red dot with the number 1 for me for reset?

  airport utility is open on my screen there's a new red dot now displayed a number 1... When I click on this a dialog box appears asking me if it's ok to reset?

  What is the source and meaning of this red dot?

  I do not bother with the machine. I walked over to my office and found the screen as shown above.

  The Red badge is a notice that a new firmware update is available for your router AirPort.

  Click on the Red badge, and another window opens with an update button.  Click on update, if you want to.

• What are the "active connections" in the cache

  What is?

  Quote:

  Active connections are sites you are currently connected to that you are asked to remember that you are connected (e.g. Facebook, if you open a session and her application of do not forget that you are connected). Erased just logs you on these sites.

  This is not true.
  These settings are stored in a cookie on your computer and are not affected by disabling the active connections.

  "Active connections" covers what philipp displayed above (using Basic authentication) and those are connections to FTP servers via a login to authenticate local or registration on servers otherwise.