Sword of the new world by Gamersfirst

Similar Questions

• Installation of OS 8.6 or 9.2.1 via the USB port on the new world Mac?

  Hallo!

  I have submitted a similar question pertaining to the installation of Mac OS X 10.1 - 10.3 via USB drive in the section "Mac OS X 10.3 and more", so if you saw that please also answer here.

  Here's the situation: I have an iBook Clamshell G3 233 MHz 265 MB SRAM 16 MB of VRAM with 1xUSB port 1.1. I need an operating system installed and the only alternative for Mac OS 8.6/9.2 or OSX 10.1 - 10.3, who is eligible for this machine is PowerPC Linux, which I can only install a copy CLI (Command Line Interface only) of Ubuntu, I strongly prefer not to use. I tried all the methods of creation of the copy USB Installer, I mentioned in paragraph three of this post:install OS X 10.0 - 10.3 from USB on Mac New World? for Mac OS 8.6 and 9.2 disks as well. I have the installation disk OS 8 detail (8.6 green disk with large 8 and photo inside the loop at the bottom) as well as the installation of retail 9.2.1 universal disc (with the big orange 9 on the label), however the CD - R drive is completely shot, as mentioned in the above linked post it can read the disks, but it cannot initialize a boot drive and takes an hour to recognize / + 20 minutes to read a disk sector so the direct installation of disk option is completely.

  While unlike the case in the post above, I can actually get my 9.2.1 installer USB disk copy to start, the copy of 8.6 installer refuses to even be recognized in the boot selection menu (Option at startup) and when I boot the 9.2.1 USB install, I get the notorious "the software of the system at boot drive only functions on the not so copied original media on another drive." message.

  Once again using my CD player - R is out of the question. I did so that the image is "locked" before writing the USB disk, set permissions for image for 'r - r - r -' and formatted the drive as 'Mac OS Standard' (HFS) before writing, and I still got the message. Here are the best: I've used "ResEdit" on a separate Mac OS 9 installation to remove the 'xboo' resource that checks for the media type of the program "/ System/system files", copied the contents of the installation CD to a folder, replaced "/ System/system folders ' with the amended version, creates a new. Master image CDR CD size 665, 8 MB , the size of the original drive, moved the folder with the copy of the installation disk for the installation of OS 9 separate existing, blessed the 'File system' directory, moved back, filled with the contents of the disk image (including the program updated the 'system'), disassembled the new image, 'locked', set its permissions to "r - r - r" - and wrote directly to HFS format USB drive using sudo dd if = «» image path"of = / dev / 'USB drive number' fixed permission on the new USB installation disk, and he successfully started the installer to OS 9.2 modified in menu selection of boot HOWEVER, at the start of the poster Installer always the same message:" the software of the system at boot drive only functions on the original media, don't if copied on another drive. " Even if the function to manage this scenario has been removed, and all permissions are set up correctly.

  I'm doing something wrong? It is even possible in ANY scenario to install Mac OS 8.6 or 9.2.1 installation disk backup direct, or via a USB disk/Flash Drive? Or do I have to buy a new iBook CD - R drive and a Torx T6 screwdriver to replace it just to reinstall Mac OS? Like I said before, we will find more details on the methods tried in the variation of Mac OS X this post link above, so for more information or overview Setup OS X with a USB drive instead of Mac OS just reply to this post. Any help or suggestions are appreciated, and I need an operating system installed on this machine outside the only command line Linux evil. Thank you!

  Mac of this generation will only boot from the internal drive, CD or Firewire.  I just heard rumor a few PPC Macs can boot from USB and it is probably for some OSX version.

  I don't know if target disk Mode or it works for OS9 boot: install 10.4/10.5 on a Mac with a broken / or incompatible optical drive - https://discussions.apple.com/docs/DOC-1020

  Please, do not cross post multiple for one. It is very difficult for people who are trying to help you be able to track what has already been said, especially if we seek the other topic (you do not provide a direct link).

• Creation of a new world 32-bit depth

  Hi all.

  Probably a silly question but how to create a new world of 32-bit floating point using suites of . WorldSuite1()-> workworld() ?

  My plugin successfully creates worlds at a depth of 8-bit and 16-bit, or - lies the PF_NewWorldFlags thus: flags | = PF_NewWorldFlag_DEEP_PIXELS when moving from AE to 16-bit or 32-bit (I wonder if this is where I'm wrong...).

  But how can you tell new_world() that the new world either 32-bit? When I switch AE to 32-bit I get error

  After effects error: failure of internal audit, sorry! {PF_Iterate requires source worlds and the dst at same depth}

  (37: 14)

  The new world created ok (but probably with deep pixels) but when I call suites. IterateFloatSuite1 ()-> iterate() to iterate through the input everyone and deal with the new world of the dst effect causes an exception and AE displays the error message (37: 14) (about 15 times!). My functions iterate are all set to the top to treat the depths of correct bits.

  My plugin is SmartFX, with the PF_OutFlag2_SUPPORTS_SMART_RENDER and PF_OutFlag2_FLOAT_COLOR_AWARE flags set.

  I have another weird question, but I will post that in another topic.

  Thanks a lot for any assistance.

  Christian

  You must use PF_WorldSuite2, look at this http://forums.adobe.com/message/4566766 entry

  welcome them

• in the new iso standard 10 analog world clock update?

  How can we change the analog world clock in the new update iso 10? You could do it before, and now I don't see how to change it.

  I only ever remember an analog option on my iPad.

• New guidelines for the new App World look?

  Has anyone seen the new guidelines for the image to be submitted with your application?

  It says an "icon" of 480 x 480 px. But looking at the elements recommended in App World now, most of them more like small billboards and is in a landscape format.  (I suppose that the probability to be featured are becoming thinner, but I was wondering...)

  Thank you, Pierre, who was a good tip (I don't actually have a product yet, but I just jumped through the Wizard], I saw, he asks basically two images, the icon of 480 x 480 and an image 1920 x 1186 pixel to be featured, so that the most logical)

• BlackBerry smartphones can not download the new bb app world

  I have a bb bold 9000 and I am trying to download the new app world 3.0.0.73. Every time I get only version 2. something. How to do later?
  Thank you

  Hello estepney,

  Here are the requirements for future reference:

  http://www.BlackBerry.com/BTSC/KB17659

  Availability of blackBerry Device Software is determined by your wireless service provider. You can check the versions available here:

  BlackBerry Desktop and device software download sites

  See you soon

• BlackBerry smartphones I've downloaded the new version of the BlackBerry World of BL...

  I downloaded the new version of the BlackBerry World of BlackBerry World and it won't let me open it. It says "BlackBerry App World is had problems to connect to the server of the App World blackBerry. Check your network connections, and then try again. "What should I do? Thank you.

  Note to all - double post... another thread is active.

  OP - please mark this topic as resolved...

• Smartphones from blackBerry App World not generating no new license to the new device Code

  I want to move my old 8900 MyCast Weather on my new 9550 but App World will not produce a new license code and continues to fed the former.  I followed the procedure below has been proposed by Garmin several times and installed, reinstalled, deleted, battery pulls and everything I can think of and nothing works.    Sure would appreciate any suggestions.

  The user goes to a new BlackBerry:

  If the user tries to download App World for the new device and newspapers by virtue
  their PayPal account, you can reinstall each element individually.
  Once installed, the status changes to "installed".  If the user had
  free trial / elements on the previous device, they have to redownload them
  Once again.

  If the status of an item appears as "Not available for this device", the
  point is not compatible with this model of BlackBerry.  If it turns
  available for this device later, the status changes to "uninstalled".
  and it can then be put back.

  The license key will be different for the new device because the PIN on
  the device is different.  The new key is located in the App World of
  choose My-Cast Weather since My World tab.

  Got a new Garmin code that has worked.   Really appreciate the good service from them.   Hopefully RIM will correct the problem with AppWorld soon.   Thanks again for the help.

• Smartphone App World for blackBerry applications does not transfer to the new device (Curve 8330 - Verizon)

  I have a new Blackberry Curve (8330) due to a security problem.  I changed my device PIN via Blacberry BIS - Verizon and my email accounts all function fine.  However, I got a few requests on BB App World which do not appear in 'my account' BB App World.  Is there anything else I need to do to get these apps on my device.  Thanks for any help on this.

  Hello!

  To reinstall your applications, please follow this section of the AppWorld user guide:

  • http://NA.BlackBerry.com/eng/deliverables/7268/re-install_an_item_on_a_different_device_643962_11.js...

  When you connect to AppWorld/MyWorld (via PayPal references), it should get your old PIN of BB AppWorld account to the new.

  For more information, registration keys, see this KB:

  • http://www.BlackBerry.com/BTSC/KB18646

  In some cases, it was discovered that reinstalls / updates (from got AppWorld apps) require additional steps in order to install the update. If the update will not install, please try this:

  1. Homescreen > Options > Advanced Options > Applications > highlight the app > > remove
  2. AppWorld > MyWorld > Login > highlight the app (if she shows at all, in any State) > > remove
  3. Use your PC (via the mass storage Mode) or your BB (via Media > > Explore) and find all references (folders, files) to the app delete everything you find. Search the memory of your device and your press card as well.
  4. Use the link to user guide AppWorld above for re - install the app - then predict a new activation/registration key

  Regarding your question about how long it takes to get a response - it varies considerably. There is no member of RIM assigned paid staff regularly participate in the forums and therefore there is no SLA. The good people who regularly participate on a voluntary basis and spend a lot of time as they can-, but which will naturally be quite variable account held that they must have 'real jobs', as well as personal life. In general, 24 hours is a reasonable period, but may vary as well because of uncontrollable variables in the game.

  See you soon!

• New blackBerry Smartphones version of the app world

  I have the Curve 8520 and now have app world version 2.0.1.12.   I got a message yesterday that the new version of 2.1.0.39 is available, but there is no 'Upgrade' to click on download button.

  The installation and upgrade instructions are the same. When, on the BB, you click on the link that you send to the BB (on site), it takes you to an installation location. During installation, the installation program recognizes that there is a previous version of the AppWorld on the device... and it will prompt you to allow him to replace the installed the new version.

  rber wrote:

  I don't understand why the email I got BB yesterday on my phone does not an upgrade click on option.  Choices are 2 that I have to click 'Critiques' and 'recommend '.

  I don't have any idea of what email you have received, so I don't know what it was. I remember never to receive an email advising me of this upgrade... then again once I check regularly for upgrades and other, so maybe I got him earlier than the email notification.

  rber wrote:

  I tried this email as you suggested.  He came in my email computer but not my phone. .

  Not knowing your configuration, I have no idea. You can also, as it is said on this site, enter this URL in your browser to start the BB installation program:

  • www.BlackBerry.com/appworld/download

  Good luck!

• Missing themes of the new Z10 world Blackberry blackBerry...

  Hi guys,.

  Is it me or with the new Z10 not there at - it no longert all themes appropriate the Z10 can download or use at all?

  Thank you

  Thanks, I thought that this could be the case but thanks for the confirmation.

• The new Apple Watch comes compatible with my iPhone 5 s 16/09/2016?

  Hello world

  I am interesting in buying the new Apple Watch, and I don't know if the watch is compatible with my iPhone 5 s.

  I already pre-order my iPhone 7 more, but it won't do anytime soon, and I'm sure that the watch is compatible with the new more than 7. I wonder all the old iPhone 5s. My iPhone 5s does not use IOS 9, but 10 of IOS.

  Thank you

  Hello

  Yes - the new Apple Watch models are compatible with your iPhone 5s.

  As for the first generation watch, the new models require iPhone 5 or later.

• 8 GB of RAM on the new Qosmio G50/55 X 300

  Hi to you all. I was wondering how to increase RAM on the new qosmio (G50 and X 300 series) models
  If I remember well from 8 GB of RAM are supported only with a 64 bit OS but it looking Toshiba web all around the world that seems in fact only the French model has inside a 64 bit OS, but you will see in any kind of Qosmio this possibility.
  For example, in Italy, in fact you can buy only the G50-103 with Vista Ultimate 32 bit... so, how will increase memory up to 8 GB?

  Sorry for my English (I hope you understand it...!)

  I guess you have wondered how to have 8 GB with an operating system and not only how to increase physically, or? If you want to have Vista64 you can also get a machine IN your country and buy a Vista64. As the platform supports more than 4 GB of RAM you won't have many problems to have a machine with 8 GB of RAM.

  On the other side: do you really need a lot of RAM? Each piece of the RAM to 2 GB would be recognized, but after 2-3 GB you do not recognize even when you work with photoshop. 3 GB of RAM are absolutely enough and everything would be better in a server or 3D workstation that requires a lot of RAM because of these LARGE textures and models.

  Welcome them

• I have the robo form. The new update can not transfer roboform to 5.0. What is the solution.

  The new firefox update available States that it will not be trasfer my robform in the world add on the old version of firefox to version 5.0. How can I upgrade to 5.0 and maintain my add on.

  See Robform for Firefox 5 update for their add-on Firefox compatibility.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.