Symbol for FrameMaker 10 module

Similar Questions

• How to get the symbol for ´´yens´´

  The symbol for ´´yen´´ is no longer in the 10.0.2 IOS and it is part of my code to open my ipad air 2. Instead, Apple made some changes in the keyboard and included our symbol of the currency of Costa Rica. How can I get?

  On the on-screen keyboard, press the '123' button, then press "#+=" and you should see the Yen sign (A Y with a sign = top)

• Symbol for 'Not' or 'No' freezes on screen 5/8 of the way in a reboot.

  I had a problem with Mail and while in system preferences it froze. I had to force quit sys prefs out and decided to do a reboot of my machine. After restarting the screen shows a darker light gray background with a grey Apple logo. Below a status bar which advanced until he got about 5/8 of the way through and stopped then the screen to grey with a grey symbol I'll call the international symbol for "not '. '. You know, the circle with the diagonal line through it? What does this mean and how to solve this problem?

  stop and remove any external devices on your mac (you can leave the power supply connected), restart and reset the PRAM

  https://support.Apple.com/en-us/HT204063

  If that does not correct the boot problem in single-user mode

  How to start your Mac in single user mode or verbose--Apple Support

  and at the prompt, type

  fsck-fy

  When finished type

  reset

• Battery will not charge. Display shows the extreme right red bars on the battery symbol and a white symbol for wire candle underneath.

  Two places of charger and different threads. The phone appears with a black screen, only this time with a RED bar to the left, showing the horizontal (usually green inside status bar) symbol which indicates a REALLY low battery and a NEW symbol for what looks like a power outlet under. See photo. Phone was unusable, while it is plugged. I pressed the two buttons necessary to reset and nothing happened for several minutes. While I put the phone down for a while, then only made the Apple logo appeared in a reboot. Surprised it took at least a minute or two to turn it back on. Clues as to what it all means? Or was - this all simply SO sink for battery charging that it adds this symbol of the additional card on the screen?

  

  You hear the sound of loading when you connect the phone to the computer or adapter?

  Leave it connected to the adapter for at least 30 minutes, then check again if the battery charge during this time. Before you connect, make sure that the docking port is free of any debris or lint build-up, which may prevent it from loading.

  The phone is recognized by iTunes if you connect it to the computer. You use the original adapter and USB cable provided with the phone?

• I have a little problem with my HP KU0841 keyboard I used to be able to hold two keyes to get the symbol for the pound sterling but it won´t work now all the ideas that I hit to stop this work?

  Can anyone help please.  I used to be able to get the symbol for the pound Sterling by pressing ALT and 0163 at the same time, maybe you'll know

  That's how you used to make the binary code on non-electric machines punch original card.  This will make me sound old?

  It's very frustrating that nothing bought here in Spain is not consistent with the rest of Europe, it is purely for the Spanish market.  I need to use this and other symbol that don't appear on my keyboard, but it is very - very sensitive touch and I think I must have hit another function key for stopping this work but can find nothing written on the computer and the manual was not in the box. as usual.

  Please let know us if possible thank you.

  Start > all programs > Accessories > system tools > character map

  http://symbolcodes.TLT.PSU.edu/accents/Charmap.html

  You can drag the key and drop it in your report or use the code indicated in the bottom right of the application

  Key codes Alt Windows

  http://symbolcodes.TLT.PSU.edu/accents/codealt.html

• Keyboard does not appear the correct symbol. for example, shift2 displays quotes and not the symbol in

  When I want to type the symbol - to-.  Or - quotes. They are two-way around. Done on my keyboard I press SHIFT then number 2 and upwards just in quotes. Even when I press shift and the symbol for quotes, the symbol appears. I don't know how to get it back to how it was. Help, please. Thank you very much

  Hello

  Regarding the problem of scrolling, I had a few ideas I wanted to try to see if I could reproduce this as I think this is your problem. Alas, it seems that your problem is not what I think it is or I just can't reproduce it.

  The only thing I can think is that you moved the window so that part of it lies below the taskbar. You move windows by placing the pointer of the mouse inside the title bar and 'drag' the window to a new location. If this is the case, you should be able to move the window again once so that it is visible to all. This link...

  http://Windows.Microsoft.com/en-GB/Windows-Vista/working-with-Windows

  .. .save a guide for Vista but most applies to XP.

  Here are a few troubleshooting steps...

  1. If you hold down the Alt key and press ENTER, the entire window, including scroll bars, becomes visible? ALT-Enter again will put the rear window as it was.
  2. What is the brand and model of your display and what resolution do you currently use? Right-click on an empty part of the desktop background, and then click Properties. Then click on the settings tab.

  Tricky

• How is the SHA hash for a generated module?

  Hello

  I was wondering if someone had more information about the CodeModuleManager.getModuleHash () method?  The API says:

  "Returns the algorithm SHA hash in a module."

  I've used it before and it gives me what looks like a SHA1 hash.  The only problem is, I'm not able to reproduce this hash by generating a SHA or SHA1 hash using my computer.

  For example:

  If the BlackBerry gives me 02A826682116ED6A7B9B4429CAAFD2DF198A29F7 for the net_rim_app_manager module, running the same .cod file does not provide me with a corresponding number:

  azazel:tmp sheran$ openssl sha net_rim_app_manager.cod SHA(net_rim_app_manager.cod)= 03804aa899166d0eed95ddf3a758446c2159ee4b
  
  azazel:tmp sheran$ openssl sha1 net_rim_app_manager.cod SHA1(net_rim_app_manager.cod)= 7feebefdad9a39d98c70d0282cca935fd2dc55fe
  

  My questions:

  1. How did this hash generated for a specific module?

  2. how the calculation would be different for a module with many brothers and sisters?

  Thank you

  Sheran

  The tail of each signed module is a list of signatures. When you calculate the SHA-1 hash, you must exclude this part of the binary file to hash.

  When a module is composed of several modules, it is in fact a ZIP file. Each ZIP entry that contains a module (brother) has its own hash and signatures. Easiest way to test this is to decompress the. COD file and calculate the values of the hash for each file.

• On the calculator (Start button) how to multiply and divide. There is no symbol for multiply and divide...

  There are symbols for add and subtract (+ -) but nothing for multiply and divide. How to do?

  Multiplied by East *.

  (example 8 * 2 = 16)

  Is divided by.

  (example 12/4 = 3)

• Package for errors IPA ADT with symbols for architecture arm64

  I use AIR Beta ADT command line 22 to try to build a simple test of IPA. I built a simple empty SWF using Flex 4.15, then tried-package. However, I get:

  Undefined symbols for arm64 architecture:

  "_CFStringLowercase", referenced from:

  _platform_LCMapString in libRuntimeHMAOT.arm - air.a (gsstring_osx.o)

  "_kCFBooleanFalse", referenced from:

  _initCommonOptions in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterZeroSymbol", referenced from:

  _initCommonOptions in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  l_switch.table in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterNegativeSuffix", referenced from:

  _platform_set_numberformat_mode in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  l_switch.table in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterPositivePrefix", referenced from:

  _platform_set_numberformat_mode in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  l_switch.table in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_CFNumberCreate", referenced from:

  _internalSetNumberProperty in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_CFNumberFormatterSetProperty", referenced from:

  _internalSetNumberProperty in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  _internalSetStringProperty in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  _initCommonOptions in libRuntimeHMAOT.arm - air.a (gsnum_osx.o)

  "_kCFNumberFormatterGroupingSize", referenced from:

  ...

  (more than 1000 lines)

  
  

  OSX using Xcode SDK 9.3 7.3/iOS 10.11.4,. I tried AIR SDK 21 and that of Flex 4.15 (AIR 20?), same result. I also tried to replace the AIR SDK, as described in other posts, no effect of ld64.
  

  Found, I just needed to simply use the correct platformsdk (iPhoneOS not iPhoneSimulator), ex:

  /Applications/XCode.app/Contents/developer/platforms/iPhoneOS.platform/developer/SDKs/IPhO neOS.sdk

• How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1?

  Hi all

  I am trying to disable some built-in options for all modules as well as all users in paragraph 6.1.1.1.

  How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1.?

  Please help me solve this problem.

  Thank you

  Nefertari

  Thank you Ivy, Yes.

  I made some changes more in environment settings that helped me to turn off the button the user create a user/edit.

  Thank you

  Nefertari

• How do I swap a symbol for the layer not only for a Tween?

  So I want to replace an arm of a guy with another arm. The layer is made up of many interpolations. I have replace one symbol (arm) with another (the other arm) interpolation by interpolation. I wonder if there is a way to replace a symbol for the layer at the same time.

  I'm new to Flash so my question may strike some as absurd. Please, let me know if this is the case.

  The buttons at the bottom of the timeline is a (tip aide said "Change markers") button and another button, 'change multiple images '. Turn on edit multiple images, then in menu markers to change choose marker range all. Now, click in the layer that you want to change, and change in the menu, choose symbol symbol/Swap... You can now purchase the other symbol in the library, and all the symbols in this layer will be swapped. Disable Edit several images when you are finished.

• "Unable to install the plugin from RoboHelp for FrameMaker...." »

  Hi-

  I have 9 Frame and a copy of RoboHelp 8.0.0.203 demonstration and works in Windows 7 (all of a sudden. Yet to learn my way in the operating system after a catastrophic failure of the weekend with my trusty little machine XP.) I have no TCS2; just these two stand-alone tools. I have a book of frame I need to turn into contextual HLO and am auditioning Robo for the task.

  No dice. Whenever I try to import (see below re linking) I get an error message in a box marked "RHUtils": "unable to install the plugin from RoboHelp for FrameMaker. If please close FrameMaker and try again. »

  
  With your permission, I'll cover a few points in the order in which they come to mind:

  == > Initially I tried linking, hoping of course to the advantages of the single-sourcing. I learned in this forum and elsewhere (-btw, thanks for this great resource) I need the TCS2 in good faith in place to connect. Thought that I could import for now instead of it, just to see how it happened; received the same error message.

  == > It was AFTER I had done the research and on the Adobe site (http://www.adobe.com/support/robohelp/misc.html) found this: "the plug-in for RoboHelp, FrameMaker FrameMaker users allows quickly convert any number of books for a simple import or FrameMaker files in RoboHelp 2002 and X 3.» RoboHelp X 4 includes the plug-in! For RoboHelp, FrameMaker plug-in is only available for Windows. To install the plug-in, unzip the RoboMIF.dll into the Plugins folder in the installation of FrameMaker folder (normally found in C:\Program Files\Adobe\FrameMaker7.0\fminit\Plugins)...   Once the plug-in has been installed, restart FrameMaker. FrameMaker now includes a RoboHelp menu. "OK: I have downloaded RoboMIF.dll, installed according to the instructions, rebooted just in case, and now"Adobe RoboHelp"actually appears in the menu bar in the frame. I however always the error message whenever I try to import (now).

  
  == > For several of these attempts Frame was indeed closed. For several other Frame opened to the entry page and nothing else. No apparent effect, anyway.

  
  == > Import and link Word files seems to work very well - which is cool, but my document is in frame at the moment. I know I can convert, but up to now to convert the word seems to need to get all references, what I did in the framework. Doable but not my first choice.

  
  == > I found a thread of editors at http://www.mail-archive.com/[email protected]/msg18576.html / / www.mail-archive.com/[email protected] msg18576.html relating to this problem. The recommendation, (published here for brevity), who was the author:

  1. locate [the] Maker.ini file and ideally make a backup of it, just in case.
  2. in the [APIClients] section of the maker.ini file, add the following line:

  RH4FMver9 = Standard, RH4FMver9, C:\Program Files\Adobe\Adobe Technical Communication Suite 2\Adobe RoboHelp 8\RoboHTML\RHFrameMakerServer9.dll,all

  3. you should now be able to launch RoboHelp and 'link' files, FrameMaker, FrameMaker application should launch correctly.

  This doesn't seem to be my answer because I don't yet own TCS2. This path does not exist.

  (I still get excellent advice of training provided by this answering machine, RJ Raquez, to http://blogs.adobe.com/rjacquez/2009/05/linking_framemaker_9_books_in.html.)

  In any case, this is where I realized that I was, at least for now, of ideas. Does anyone have more?

  Thank you-

  Anne

  If you do not want to go down the road of miftogo mentions Arnis, you can always download the demo of TCS2 - it is fully functional for the period of the demo. I am tempted to install it in its own virtual machine (or another machine entirely) so that you do not get the demo interfere with your legitimate copy of FM9.

• RoboHelp for FrameMaker requirements

  I have v1.1 of RoboHelp for FrameMaker and FrameMaker v7.2. RoboHelp complains that FrameMaker is not installed. V7.2 is not supported? Is there a way I can deceive RoboHelp to using anyway (change file name, etc.)?
  

  As far as I know, RHF supports FrameMaker 7.2, 7.2 is out significantly after RHF. He seems to recognize FrameMaker 7.1, but has problems with newer versions to distill that are provided with the latest versions of FrameMaker. I guess the 7.0p578 frame would be the best option for the Interior with RHF.

  However, you CAN have several versions of FrameMaker on the same system. So, you could have framework 7.0 (for use with RHF) and Frame 7.2 for other projects on the same system. Save your FrameMaker files in MIF files for maximum portability of the different versions.

  The sticking point will be to distill - several versions of Distiller on a system can cause all sorts of issues.

• What is the schema for the service module planning part name

  Hi Experts,
  
  I need the info
  
  1. What is the name of the schema for the PSP module
  For example, suppose that we call CPSA as MSC, in similar passion, which is the name given to the SPP.
  
  2. I searched the details in the table in etrm site (in R12.1.1) but it does not exist, can anyone help me to get the details of the table in the PSP?
  
  Thank you for your valuable time.
  
  Good bye
  Badin

  SPP uses the same tables as MSC with additional columns as appropriate. There is therefore no separate scheme for the SPP name.

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?