How do I swap a symbol for the layer not only for a Tween?

Similar Questions

• When I try to distort large layers the area becomes is full of lines and symbols (and the layer I'm deformation is no longer visible) OR the lines move without the layer move at all.  In both cases, the results of the movements are visible only after

  When I try to distort large layers the area becomes is full of lines and symbols (and the layer I'm deformation is no longer visible) OR the lines move without the layer move at all.  In both cases, the results of movements are seen that when you hit enter.  Images and layers are big enough.  fight 1 GB.  I have a lot of memory and using 4 GB or RAM. on mac.  Any ideas how to fix?

  Thank you

  Could you please post screenshots to illustrate the problem?

  Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

• How to fix windows photo viewer showing the class not regitered error in the local system.

  Dear all,

  Please provide me the solution.

  How to fix windows photo viewer showing the class not regitered error in the local system.

  Thank you best regards &,.

  Amol.

  Hello Amol,

  Were there any changes made on the computer before the show?

  The problem may occur if there is a problem with Java on the computer. I suggest you to check the link and try to update Java:

  http://www.Java.com/en/download/help/download_options.XML

  http://www.Java.com/en/download/index.jsp

  Let us know the results.

• The user can see all the resources, not only allowed for access to its organization

  Hello
  
  I put three self-serviceable resources resources authorized for a specific organization. So if I click on resources authorized for this organization, I can see only these three...
  
  When a user of this organization click on request for new resources, all self-serviceable resources are listed to the user, not only allowed resources. I thought that the user can only see authorized resources...
  
  If I connect as sys admin and request resources for a user of that organization, I can see that the three resources allowed.
  
  I saw the sql statement that run of IOM to inventory resources:
  
  Select
  obj.obj_key, obj_name, obj.sdk_key, sdk_name, obj_order_for, obj_auto_prepop, obj_type,
  obj_allow_multiple, obj_self_request_allowed, obj_autosave, obj_allowall,
  obj_rowver, obj_note, obj_autolaunch
  to obj obj
  outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
  where obj.obj_key in
  (
  Select distinct obj.obj_key from obj obj
  outer join Software Development Kit sdk left obj.sdk_key = sdk.sdk_key
  Left outer join acp acp on obj.obj_key = acp.obj_key
  OBA oba on obj.obj_key = oba.obj_key left outer join
  where
  (
  obj.obj_self_request_allowed = '1' or obj.obj_key in
  (
  Select obj_key in acp where act_key in
  (
  Select act_key
  of the usr
  where usr_key = 5 and acp_self_servicable = '1'
  )
  )
  ) and
  obj.obj_order_for = 'U' and
  (obj.obj_type ='Application ' or obj.obj_type ='Generic ') and
  obj.obj_key not in
  (
  Select pop.obj_key
  pop pop, pol pol, pog pog, PMU PMU, usg usg
  where
  pop.pol_key = pol.pol_key and
  pol.pol_key = POG.pol_key and
  POG.ugp_key = UGP.ugp_key and
  UGP.ugp_key = USG.ugp_key and
  USG.usr_key (5) and
  pop.pop_denial = '1'
  ) and
  obj.obj_key not in)
  Select distinct obj.obj_key
  to obj obj, obi obi, ost ost ouedraogo ouedraogo
  Join external orc orc left on oiu.orc_key = orc.orc_key
  where
  OIU.obi_key = Obi.obi_key and
  OIU.ost_key = OST.ost_key and
  Upper (OST.ost_status) "REVOKED" <>and
  OBI.obj_key = obj.obj_key and
  OIU.usr_key (5) and
  obj.obj_allow_multiple = '0'
  ) and
  obj.obj_key in
  (
  Select distinct obj_key
  pkg
  where pkg_type = 'Configuration '.
  )
  )
  
  As you can see in the query above, if I change the excerpt below the result is what I expect.
  
  ...
  obj.obj_self_request_allowed = '1' AND obj.obj_key in
  ...
  
  I missed to set something or something wrong?
  
  Thank you
  
  Renato.

  Sorry, but I do not understand your last answer. You mentioned the following:

  for option B, even if option A is not checked, you can set automatic ask for organization when assign authorized resources.

  -isn't that what you wanted? You define the resource resources as authorized in all organizations whose users can request this resource. I implemented this and it works fine. This works for both types of applications. (a) my resources-> request for new resources and b) applications-> resources-> Grant resources.

  In the case of b, according to the Organization to which the user is selected, the resource is displayed. all resources are not displayed.

  So the solution is to uncheck in RO and bring the resource authorized specific organizations as resources in self down. It should work fine. Let me know your exact problem if it works that way.

• How can I remove a symbol of the partition

  If I placed a symbol in a note on the score, for example a symbol staccato or legato, how can I remove it much later, once the cancellation is no longer a realistic option?

  I tried selecting the symbol staccato in the box part and then using the gum, and which erases the note instead.

  I also tried the functions > note attributes > reset all attributes and which deletes also all sharps to flats and apartments to sharp objects I did.

  Just to clarify, I need to make an entire partition, so it would be tedious to have to restore all the alterations to reset manually.

• How I have a lively symbol follow the coordinates of the cursor when you click it?

  Similar to this example: http://forums.Adobe.com/thread/1162104

  I can't find the simple code to make my cursor play a symbol where the cursor is. I'm doing a Brush tool that changes colour and fades with time, like chem-routes colors in the sky.

  Thank you!

  Hmm.

  How to use createChildSymbol?

  http://Ciruelo.jp/js/edge/CS/cursor2.html

  1: create a symbol called "Symbol_1".

  2: Add this code on Symbol_1 - Timeline.complete.

  //delete this instance when timeline complete.
  sym.deleteSymbol();
  
  

  3: Add this code to document.compositionReady.

  //on/off mousemove event handler method
  sym.$("Stage")
    .mousedown(function(){
      sym.$("Stage").on("mousemove",draw);
    })
    .mouseup(function(){
      sym.$("Stage").off("mousemove",draw);
    });
  //create instance of Symbol_1 on stage.
  function draw(evt){
    var instance = sym.createChildSymbol("Symbol_1", "Stage");
    instance.getSymbolElement().css({
      position:"absolute",
      top:evt.clientY,
      left:evt.clientX
    });
  }
  
  

  The basic method is like that. If you want to adjust the pos of the instance, number of instances, etc...

  Calc evt.clientX and evt.clientY, record the number of instances, calc distance between the instance that created before and so on.

  Good luck.

  UME.

• How I have "show" a symbol in the symbols Panel, then 'hide' again?

  So. I think that this should be easier that I am making but I can't seem to do things, any help would be greatly appreciated.

  I need to create a bunch of strong symbols and import all of them, but I like to leave it inside the symbols Panel if possible (for simplicity in the main timeline and because there will be many, many of them with a ton of interactivity in each).

  When I'm on the main timeline (which is basically just a slideshow of the files static .png) I would have a click event 'open' a symbol called from the symbols Panel and then be able to 'hide' again by clicking a close within this symbol button.

  Is this possible? I'm sure it is, but sym.$("symbol").show (); and () sym.$("symbol").hide; do not work for me - unless I'm placing them on the wrong elements. He is . toggle();

  So basically, the scenario is: I'm on an individual "slide" (png) on the stage, I clicked, opens in a symbol, I click autour and play animations etc, close with a close button and continue with the slide show where I was before, I opened the bunk symbol. "»

  Once again, any help would be greatly appreciated.

  See you soon.
  

  Well,.

  (1) you can drag and drop a symbol from the symbols to stage panel Panel.

  (2) you can use the code ( sym.createChildSymbol ("NomSymbole", "Stage"); ) "insertion" your symbol on the stage. Your "call", I guess.

  Attached file ("call").

  Note: You can replace 'Stage' with a container: "myContainer". This container can be another symbol.

• How to get a second image in the layer panel

  In item 13, I have two images that I want from. I brought here them both of the Organizer to the editor, but I can't seem to get them both in the layer panel to use one as a background. Someone just tell me how to get an image from the photo bin toward the layer panel?

  ligian2505 wrote:

  In item 13, I have two images that I want from. I brought here them both of the Organizer to the editor, but I can't seem to get them both in the layer panel to use one as a background. Someone just tell me how to get an image from the photo bin toward the layer panel?

  Several solutions. I advise to begin:

  You have your two visible photos the of in "basket" (area of the bottom of the screen). Choose the one that will serve as "background by double clicking on its icon. She apparaiit in the editing space. Now, click the second image basket of the in and drag on the edit box.  You have a preview of this new layer, ready to be resized, moved or such. Use the handles of the frame of this image pour what control do. When you post by clicking the green check mark, your new layer should appear in the layers of the screen Panel.

  You can adjust the dimensions etc. without loss of quality; This layer is UN 'smart object' as long as you don't choose "simplifier" (freeze) the layer which becomes a regular layer.

  Some operations on the layers cannot be carried out only after having simplified.

• How to make CTRL + click to find the layer within a group

  I searched the web, but am not finding what I need:

  How the hell do you control click to select a layer in a group? Whenever I have ctrl + click on a layer in a group, it only selects the entire group. I want to find the layer I'm clicking on, not the entire group.

  I don't speak from the Options bar (it's in the upper left corner)

• How to delete an image without deleting the layer?

  I consider myself an intermediate photoshop user. Since the introduction of the CS6, I can't do something simple - remove an image without deleting the layer. I don't want the deleted layer because it has a clipping mask. The tech support agent told me to use the Eraser tool. It is not effective. Is there a way to do this? I don't understand why it is now so complicated. I'm so frustrated.

  Has CTRL or cmd to select all, and then press the delete key. Just make sure that the layer is selected first.

• How to respond to a thread in the section (read-only)? R6025 run-time error

  Hello community of adobe photoshop

  I have a solution to an unanswered question in one of the Photoshop (ready Only) article.

  http://forums.Adobe.com/message/3099519

  any way I could drop off my answer in here?

  Re: Photoshop CS5 MS Visual C ++ R6025 run-time error
  
  

  in any case, I met the same problem.

  in my case, the error occurs when I use the copy and paste the shortcut (ctrl + x / c and ctrl + v)

  because of the jdownloader app that detects copy info and causing the crash

  Disabling the links copy jdownloader solved the runtime error detection function.

  If it does not work. then this is probably a different problem.

  in any case, this solution was posted by someone else, I met a long time ago.

  I hope this helps.

  Cheers!

  Good suggestion!

  I do now.

• Found and lost in the layers of the CC PS 2015 can be selected in the document, not only in the layers panel?

  Seriously, I don't know if it's a FigNewton of my imagination or a real change in the Photoshop workspace, but when I started using PS CC 2015, a few months ago, I found myself moving layers on the screen simply by clicking on it in the document and moving them, instead going to the layers panel , by choosing the correct layer, then return to the document and move the layer or change. Is this a real change or I dream? Especially, if it's an option, I can't do more. He stopped. How do I resurrect it?

  Automatic selection / auto-move has been there for several versions. Check your settings of the tool at the top when you use the move tool.

  Mylenium

• To the layer or the layer not

  I have a web page designed in Fireworks, I want use in Dreamweaver. The design has interactive elements overlap. What are the advantages and disadvantages of layering? Thanks in advance for your ideas.
  
  Kathryn

  KatOlds wrote:
  > I have a web page designed in Fireworks, I want use in Dreamweaver. The
  > design a duplication of the interactive elements. What are the advantages and disadvantages of
  > overlay? Thanks in advance for your ideas.

  What Dreamweaver calls a 'sex' is in fact an absolute positioning
  div. The pros of using absolute positioning is that it gives you
  precise control over positioning of elements on a page. The disadvantages are
  that most of the people do not understand how absolute positioning works, and
  eventually tear their hair out.

  When you position a 'sex' to ' top: 50px; left: 100px; "it's here".
  He will always be - top of the page 50px 100px of the
  left. Because the 'layer' is removed from the flow of the page, other
  elements may be behind it and the layer may appear when
  the page is resized. It moves. What is happening is that the rest of
  the page is fluid, but the layer remains the absolute positioning.

  Positioning with CSS is a very powerful concept, but it is complex. He
  takes a lot of patience and experimentation to understand.

  --
  David powers
  Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
  Author, "Foundation PHP 5 for Flash" (friends of ED)
  http://foundationphp.com/

• Windows 7 - import of photography wants to import all THE photos, not only news

  Try to import some pix of my camera.  Windows want to copy all of them, not only in the new.  How can I choose what pix I want to import without having to import one at a time or having all my camera pix downloaded over and over again?

  When AutoPlay appears, select open folder to view files, select view by date, highlight them with the date you want, doing a right click and select copy.  Navigate to where you want (probably a folder in my pictures), create a new folder with the title you like, go to this folder and right click, select Paste.

• Selection of the layer not bound to cancel the story when the effect controls panel is open.

  Did anyone else noticed strange with the undo history behavior when the effect controls panel is opened?

  Try this:

  1. have the layers panel, the history and the visible effects at the same time.

  2. open an image

  3. duplicate the layer

  4 make a new empty layer

  5. take the Brush tool and paint two strokes on the new Virgin layer

  6 return the layer duplicated under the layer of white and two strokes of paint

  7. in the history panel, back in the States in history and look at the layers panel

  

  Now close the effect controls panel

  1. in the history panel, select the last State of history

  2 go back in the history States

  Noticed a difference?

  Photoshop elements 11 on a windows 8 bit x 64 system.

  Title of the message was edited by: Brett N

  I see the behavior, and I'll log a bug for her report. Very strange, but good catch what the effects Panel which is the source!

  27Prac, make sure that the effect controls panel is pointing upwards, it is essential. But I tested it on Windows and Mac and see on each.