Synchronize my Pocket PC Dell AXIM 5 with my desktop Dell computer by using the Windows Vista operating system

Similar Questions

• Dell Studio 1737 running the Windows Vista operating system. Hard drive errors

  My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

  My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

  Hello

  This Dell 2000-0146 error code is for a failed hard drive / failed.

  You will need to replace and reinstall the operating system.

  Save your data as soon as POSSIBLE.

  See you soon.

• I'll be able to use the Windows 7 operating system on my new motherboard with the same hard drive?

  I have a card mother broken dell and I wonder if I change for a card mother Msi or Asus, but I always use the same hard drive that have my bones inside. I'll be able to use the operating system on my new motherboard?

  Original title: Windows 7

  No, you will not be able to.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• How can I reformat my laptop with the Windows Vista operating system?

  Hello

  Please advise how I can do a reformat of my laptop which runs Windows Vista OS that I don't have the CD or DVD drive? normally it is preinstalled by the manufacturer. Thank you

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to completely uninstall AutoaaCad 2006 of my laptop with the Windows Vista operating system

  I have already installed AutoCad 2006 on my Windows Vista Home Premium & found that it was not compatible. I don't then later uninstall but every time that I do a system scan, I still see a huge amount of this AutoCad components scanned record (the location of this software that appears in the scan's Office & yet there is nothing yet on my desk). I just clicked on the Start button & then typed the word "AutoCad" in the search box & found 2 components of AutoCad namely 1) Autocad Textstyles and types of line;
  (2) autocad.
  Please help me remove these - they take too much space on my drive.

  Hello

  try to see here, that might help you:

  http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=2887771&LinkId=9240617

  LC

• Can not find the drivers for a HP 1000 Laserjet Printer to use with the Windows Vista operating system

  Are drivers available for this printer... anywhere?  Thank you!

  Hello

  below link is to HP of information available for this model of printer drivers

  HP has written drivers for their products non-microsoft

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=45675&TaskID=135&prodTypeId=18972&prodSeriesId=45674&lang=en&cc=us

• Have problems with the graphics card in laptop Amilo pa 1510 when you use the Windows 7 operating system

  Original title: ATI display driver my supposed UN stops and restoring it automatically when it Enmodepleinecran screen mode, why?

  When he restores it does in normal screen mode frozen, exit full screen running in background.

  What can be done to prevent this. I updated the driver software, but it had no effect

  So, what is the make and model PC?

• Re: Serial number down would work with the other Windows Vista operating system

  First of all sorry for my English.
  I have one question.

  My hard drive is broken with my recovery partition.
  If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.

  I hope it's the same number that the front is installed on my first installation.

  Hello Marcin

  I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
  You could test it I heard it's very rare cases it was possible

  In any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.

  If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Concerning

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I'm having a problem with my Windows Vista operating system. Problem started on 19 February 2011.

  I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.

  Hello

  You can try to do a system restore before this date

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• error: 0xc000000f with original Windows Vista operating system... Will not clear the checkpoint!

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD

  Status: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.
  
  The system requires a "windows installation disc. I don't have one.  I bought the new PC and I don't remember if a supplied with the device or asked me to support him!
  I tried the eRecovery download and Boot CD result was the same mistake.
  What should I do?
  Did I lose my data, I an effort to get my system back on?

  Help!  Thank you
  I have

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How to acquire installation of Dell for a factory disk Windows 7 operating system installed?

  How can get the floppy to installing Dell for Windows 7 preinstalled O.S.?  Failed to get through the support without an option of client web site id, no chat or e-mail to find out this information. Must have an order number or a customer number

  The United States, you can ask for it here:

  support.Dell.com/.../backupcd_form

  Alternatively, you can download and install using the media "retail" and then activate by phone (with Microsoft, Dell no) by using the product key on the COA/license sticker on your system:

  www.mydigitallife.info/Windows-7-ISO-x86-and-x64-Official-Direct-Download-Links-Ultimate-Professional-and-Home-Premium

• Why I can't install iTunes on my laptop with the Window 10 operating system

  Why I can't install iTunes on my labtop with Window 10 operating system

  Have you downloaded the latest iTunes from here and correct version

  https://www.Apple.com/iTunes/

  and then run the downloaded installer.

• Can I use the Windows Vista I had with my Toshiba laptop on virtual machine?

  Hey all

  I have changed Microsoft for Macintosh, but installed on a virtual machine (oracle vm virtual machine) my Windows Vista I got with my Toshiba Satellite A350D Notebook previous. I installed Vista with the recovery disk. Now he asks me the Windows Vista product key. The sticker on the back of my laptop is more readable. I run the Belarc Advisor to get the product key in this way. But right now, he said: "it's the product key installed at the factory by the manufacturer rather than yours. You can change this to your product key here for Windows http://go.microsoft.com/fwlink/?LinkId=45668"

  My question: am I not allowed to use windows vista legally, I had with my computer toshiba laptop on other devices? I won't use the Thoshiba laptop. Do I have to delete the record from the Thoshiba laptop? Where can I get a new product key?

  Maybe someone can help me here. Thank you in advance for taking your time to read this.

  Betty

  Recovery disk or recovery image is designed for some cell phone only and is not a kind of universal image that can be used on other devices. It comes with the laptop.

  You can use the Microsoft Windows disk with valid license on each device. Recovery image is not only BONES. This is the package that contains the drivers and tools specific to Toshiba and utilities.
  As you also know recovery image when you install it on your laptop must be turned on not so the license code downstairs just proves you have purchased a valid license with your laptop.
  > Should I remove the record of the Toshiba laptop?
  Not why do this?
  > Where can I get a new product key?
  You cannot get it because you need when you use the recovery image on your Satellite A300D. I think even you will hear of Toshiba.

• Microsoft Visual c ++ 2005, 2008,2010 programs. Downloaded SQL server 2005 compact edit, Mgmt 2008 and 2008. NAT Client. Is ok with the Windows Vista Ultimate system. I use 32 bit x 86 o/s?

  Can I run all these programs with Vista Ultimate 32 bit x 86 o/s? "Should I delete some of these programs and who?

  Thanking you in advance
  E-mail address is removed from the privacy *.

  Microsoft Visual C++ 2008 Redistributable Package (x 86) installs runtime components of Visual C++ libraries required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2008.

  Check this: http://en.wikipedia.org/wiki/Visual_C%2B%2B