synchronize S 6110 PCI and PCI-6250 M series

Similar Questions

• My PCI-6250 does not see my SCXI box

  Hello

  I want to install a station using a PCI-6250 connected to an SCXI chassis cable 68 pin.  We have a couple of these formations, so they gave me a Setup disk that have our configuration is already done.  However, I had to install a software, that they neglected to give me.  I got the latest driver for the latter of NOR.   Well, maximum running, my tree is distinguished by a previous configuration.  And mine is not communicating with the SCXI.  My cards are "x" ed out.  The Communicator 'chassis' in the SCXI chassis Configuration is grey (no options).  I checked the wiring and disconnected all the blocks for the cards.

  Here is my tree.

  NOTE: Mine also does not have the "NOR-DAQmx devices" under the heading "devices and Interfaces, only in the software section.  Other configurations have this list.  I don't know how to get "devices OR-DAQmx" shown.

  Any help would be appreciated.

  My system

  • District data
  • Devices and Interfaces
    • GPIB0 (GPIB-USB-HS)
    • Network devices
    • OR PCI-5402 'Dev1 '.
    • OR PCI-6250 "Dev2.
    • OR SCXI-1001 "SC1".
      • 1: OR SCXI-1125 'SC1Mod1 '.
      • 3: OR SCXI-1124 'SC1Mod3 '.
      • 4: OR SCXI-1160 'SC1Mod4 '.
      • 5: OR SCXI-1163R 'SC1Mod5 '.
      • 6: OR SCXI-1163R 'SC1Mod6 '.
    • (Unidentified) PXI system
    • Series & parallel
      • COM1
      • COM2
      • Com7
      • COM8
      • COM9
      • COM10
      • LPT1
      • LPT1.4
  • Scales
  • Software
    • IVI Compliance Package 4.0
    • LabVIEW Run-Time 2009
    • LabVIEW Run-Time 8.0.1
    • LabVIEW 8.2.1 Run-Time
    • LabVIEW 8.5.1 Run-Time
    • LabVIEW 8.6.1 Run-Time
    • LabVIEW SignalExpress 2009
    • LabWindows/CVI Run-Time 9.0
    • Measurement & Automation Explorer 4.6.2
    • Measurement Studio for VS2005
      • DotNET
  • Commune
• Editor Script OR 1.3.1
• NEITHER Spy 2.7
• NOR-488. 2 2.73
• NOR-DAQmx ADE support 9.0.2
• NOR-DAQmx Device Driver 9.0.2
• NOR-DAQmx MAX Configuration 9.0.2
• NOR-FGEN 2.5.1
  • FGEN Soft Front Panel
• NOR-HWS 1.4.5
• NOR-PAL 2.5.2
• NOR-TClk 1.6.1
• NOR-USI 1.0.2
• NI-VISA 4.6
  • NiVisaServer.exe
  • NIvisaic.exe
• Duration of NI-VISA 4.6
• NOR-DAQ traditional 7.4.4
• IVI drivers
  • Advanced
    • Instrument Driver software modules
    • Simulation software driver modules
    • Pilot simulation sessions
  • Pilot sessions
  • Logical names

Hi mz6yx6,

First of all, don't worry about trying to get to the ' devices OR-DAQmx "appear. 4.6 Max, which was first included with NOR-DAQmx 9.0, has a revised UI layout which displays the devices inside "Devices and Interfaces" rather than display them in subfolders like ' devices OR-DAQmx.

Also, thank you for the view a report of the configuration of the system MAX. The report shows that the SCXI chassis and modules are configured as simulated devices, which I think is the problem. DAQmx (> = 8.7) does not support configurations where a simulated SCXI chassis and modules are connected to a real communication hardware DAQ. Since your system has not simulated hardware DAQ (except the SCXI chassis and modules), the "Châssis Communicator" menu has no options to display.

To resolve this issue, remove the SCXI chassis in MAX and create a real one (not simulated). How to do this depends on if you manually configure the chassis or you import a configuration from a file .nce, .ini or .txt:

• Manual: right click on "Devices and Interfaces", then select «Create a new...» ». In the window "new...". "which appears, open the ' Chassis SCXI of NOR-DAQmx ' subtree and select the chassis type from there. Do not select "Simules NOR-DAQmx device" or modular Instrument The modules must be detected automatically, but you will need to manually reconfigure the accessories.
• Import from a file .nce, .ini or .txt: in the dialog box 'Assistant Import Configuration', check that the 'Warnings and conflicts' column displays "XYZ will be replaced" or "Create device" and does not "create a simulated device.
• If the Setup disk makes the SCXI configuration programmatically or an installer for the application, then more information about what is on the Setup disk would be useful.

Brad

• How to get analog tacho signal in card PCI-6250 OR

  Dear all,

  IAM using Labview 8.6.1 and map NI PCI-6250. In my application, I need to get the power spectrum of the order for a given speed and signal of the accelerometer. So iam using labview example program command power spectrum(Analog_Tacho).VI. In my PCI6250 card, I have configured AI0 as the accelerometer signal and AI 1 as speed for tacho signal analog signal. In this sample program I can get the signal Amplitude of had it, but I can't able to get the speed profile. For iam speed using the encoder, encode this pulse digital I connected to the analog channel 1. If this connection is correct? Instead of giving digital impulses directly I tried the analog signal 0 - 10v for 0-based-1500 rpm. This configuration also does not work. Encoder PPR is 1000. Can someone help me solve my problem.

  Kind regards

  Vijay.

  At 1800 rpm spin you at 30 Hz.  for your encoder impulses come to 30 000 Hz.  You must try the channel analog encoder to 100,000 samples per second or more.  The chart of your analog inputs on a graph of time waveform to see if you get a clean signal.

  With tacho analog vi, you will need to provide the number of pulses per turn, so it can determine the correct speed.

• Synchronization of e-mail and contacts with icloud

  I have an iphoneSE c. 9.3 (last updated) and win 10 computers.  I want to synchronize my computer messaging and contacts with my phone.  I need to create an e-mail for this icloud account?  Also, I'm confused by what I should turn on or off in the settings.

  Just set up the e-mail account with the same information on your computer to your phone:

  Set up an e-mail account on your iPhone, iPad or iPod touch - Apple...

  This discussion might help the synchronization of contacts:

  How can I sync my Iphone contacts with laptop running Windows 7

• How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when the iPhone is connected?

  How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when plugged in? I recently upgraded my PC. I have restored my backup of iTunes on the new computer and it works fine. The iPhone, however, is waiting to synchronize wirelessly to the PC that I no longer use, and iTunes does not recognize my iPhone when I plug.

  I came across this problem recently and had to talk to Apple

  If you mean the computer name listed in the settings - iTunes WiFi - Sync

  Then, it's exactly what I'm talking about

  I had to not reset my - no joke - general - reset - Reset all settings - no content has been damaged and there is NO need for a restore

  Lost among others

  All my WiFi passwords

  All of my alarms

  All my preferences of location services

  BUT he did remove the old name of the computer from there

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

  try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

   
  Moved from feedback
  Original title: device

  "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

  As you do not tell us that "phone and helps OS it runs there is little more we can give."

• What happens to the data on the server if I stop the synchronization of users movies and music?

  Hi all

  I have a small question which is, what will happen to the data on the server if I stop the synchronization of users movies and music etc.

  The data will remain on the NAS or it will be deleted

  The domain controller is a Windows 2008 r2

  All of the client Machines are Windows 7

  Any help is appreciated

  Thank you

  Daniel

  Hi Daniel,.

  This question is more suited for a TechNet audience. I suggest you send the query to the Microsoft TechNet forum. See the link below to do so:
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please let us know if you have more queries on Windows.

• Synchronize the beetween HSS and planning question

  Hi all
  
  Product: Planning 11.1.1.2
  
  We had a problem on the server HSS and we cannot restore file OpenLdap.
  We had to re-create groups on HSS, but these groups are not synchronized with the planning groups (I guess that different SID)
  
  Do you know if the UpdateUsers utility I synchronize SID between HSS and planing?
  If this is not the case, do you think I can change the SID directly in the tables of HSS or repository of planning so that the two will be the same?
  
  Is there another solution?
  
  Thank you very much
  
  Sébastien

  If users were the provision of Shared Services, then you can give the utility updateusers a go and see if it syncs the planning tables save with Shared Services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to synchronize a DSA Board (4496) with several S-series (6143) tips for PXI?

  I need to set up a data system that will require the measure to phase for accelerometers-locking and dynamic deformation signals.  How to synchronize my PXI-4496 Council with my PXI - 6143 s?

  I forgot that some DSA properties does not directly on the devices of the series S I have been able to find an article in the knowledge base that has addressed your specific issue.

  Synchronization Dynamic Signal Acquisition (DSA) with NOR-DAQmx products, this includes an example program synchronization a DSA device and MIO device to sample at the same pace.

• Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Hello

  Please specify the circumstances in which dictation is a failure.

  For example, what are you doing and what message error you see?

• I have nokia N8, and HP Pavallion DM4 series laptop. Bluetooth does not communicate. How can I do this?

  Hi all

  I have nokia N8 and HP Pavallion DM4 SERIES PORTABLE computer.

  Blue Toothis communicate is not among them. How can I solve this problem.

  I tried to install the driver automatically, but it does not accept.

  Thanks in advance

  Vinod

  Hi vinod kumar turki

   

  You can check if the settings provided below are checked-

  a. open Control Panel by clicking the Start button, then Control Panel.
  b. in the search panel box command, type Bluetooth, and then click change Bluetooth settings.
  (c) in the Bluetooth settings dialog box, click the Options tab and do one of the following:
  --Pour rendre to make your computer discoverable to Bluetooth compatible devices, select the check box for Allow Bluetooth devices to find this computer.
  -To allow you to add compatible Bluetooth devices to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

  See the help link - below
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

   

  Also for further assistance, you can contact support Nokia and check-

  http://www.NokiaUSA.com/get-support-and-software/discussions

   

  I hope this helps.

• I download lightroom on amazon and it asks a series/code number but I don't have not one?

  I download lightroom on amazon and it asks a series/code number but I don't have not one?

  Hi rosei.

  Did you purchase the Lightroom on Amazon as well.

  You can check your adobe account to find the serial number recorded.

  Reference: find the serial number of your product Adobe quickly

  Kind regards

  Mohit

• I subscribed to the monthly as part of the DC Pro Acrobat. But apparently I have to activate my account, and I need a series numer, which I can not find and do not have email. Payment has already been approved.

  I subscribed to the monthly as part of the DC Pro Acrobat. But apparently I have to activate my account, and I need a series numer, which I can not find and do not have email. Payment has already been approved.

  Subscriptions do not use serial numbers

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

• Hi, my old broken computer and I lost my series for the Photoshop Elements 10. Curiously, there is no trace in my ADOBE ID on the purchase of this product. What could I do?

  Hi, my old broken computer and I lost my series for the Photoshop Elements 10. Curiously, there is no trace in my ADOBE ID on the purchase of this product. What could I do?

  Hello

  The following document can help you to locate your serial number of your product: find the serial number of your product Adobe quickly

  You can download the Photoshop Elements from the following link: using Photoshop Elements. Download Photoshop Elements | 10, 11, 12, 13

  Kind regards

  Shipti.