Lost computer internet wired host and work group

Similar Questions

• After that my computer remained at about 48 to 72 hours, he lost all internet connectivity, IE and Outlook, as well as other programs.

  original title: Internet connectivity problem

  After that my computer remained at about 48 to 72 hours, he lost all internet connectivity, IE and Outlook, as well as other programs. Before that, it works fine. If I reboot, it goes back to works very well for this period of time. I noticed I can shorten or lengthen the time that remains active of programs I run the application, primarily GOAL and iTunes. If I do not use one of the people, he can stay for about 4 days, if I use both what it comes down to 2 days.

  About 2-3 months ago, my computer started to do this. I've been troubleshooting on and outside since then, but as it was not any extreem yet I was not too concerned. However, recently the problem has progressed. It started with she it around every 7 days, so I could live with it. However, I do not restart my computer every day, so I'm hoping to solve this problem.

  Information system on this picture:
  http://I219.Photobucket.com/albums/cc280/God-follower/ComputerSpecs.jpg

  Thanks for any help or advice you can offer.

  Hello God-follower,

  Thank you for using the Microsoft Windows Vista Forums.

  When this happens in what concerns the loss of internet connectivity is able to reopen and close Internet Exporer or will you you will get the same result with an error?  I suggest go to the link below for Windows XP support and include information from above.  Thank you!

  Windows XP discussion groups:
  http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx James Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

• check another computer internet history if both work on the same router?

  check another computer internet history if both work on the same router?

  Hello

  There are two ways to access the files between computers in the same network or group work and sharing.
   
  (1) if the files and folders specified are shared within the same workgropup.
  For reference:
  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
   
  (2) you can take remote access of the other computer and check for the files and folders specified on the other computer.
  For reference:
  Remote Desktop connection
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
   
  Hope this information helps.

• Is there a way to get the list of hosts and its groups of belonging to the vCenter folder level in 5.5 web vsphere client plugin development?

  Hello

  I need to get the list of all hosts and its groups of belonging to the vcenter folder level.

  1. I created a view giving the extension point: vsphere.core.folder.monitorViews.

  2. After this step, I wrote the constraint as in my class of mediator,

  var ListConstraint:Constraint =

  QuerySpecUtil.createConstraintForRelationship ( _contextObject, 'childEntity');

  I was expecting a list of all child entities such as hosts, dc, cluster... But I have only the immediate child object which is only the Datacenter as my result.

  Is it possible to get all hosts and vCenter folder level Clusters because I need the entire list to vCenter (highest level).

  Other info:
  

  Object file has only two properties:

  1 childEntity - list of entities

  2 childType in-kind folder ('Virtual Machine', 'Data center'...)

  Is it possible to write a constraint specifying which list of childEntities I need using childType in.

  Example: Make Me childEntities that has a 'Host' and 'Cluster' childType but childType in doesn't have these two types.

  In addition, at this level, I could see the 'Associated objects' tab which has all the information I need, such as Clusters and Cluster tab hosts and host tab respectively.

  So, I think its possible to get this list to vCenter folder level.

  I have attached a screenshot representing the need. Kindly ignore the Conventions of naming in there since I edited the example comes with the sdk program.

  
  

  Query:

  1. How can I get the host and Cluster (table of relationship) list to vCenter folder level or even at the level of the vise.global.view?

  2. once I get this list, is it possible for me to manipulate that list and send the new list to IU?

  3. is there another way to do the same thing without the help of model classes and mediator?
  

  
  

  Pointers to this will be very useful.
  

  It is not possible to obtain all hosts a folder specific vCenter from a single query Data Manager.  You need to get the list of centers of data first and then get a list of data center hosts.

  It is best to make these repeated requests to the java level and return only the list that you want to the user interface.

  You can get all the objects in the host of the system with a simple query using a constraint with targetType = 'HostSystem', but you will need to eliminate those from other vCenter servers.  See how this chassis example queries all hosts the Java later in the getHosts() method: samples/chassis-app/chassisRackVSphere-service/src/main/java/com/vmware/samples/chassisRackVSphere/ChassisRackVSphereDataAdapter.java

  Another option is to use the vSphere Web Services SDK to browse vCenter. See the vSphere management forum for help on these APIs.  See this plugin of the sample using this SDK

  samples/vsphereviews/vsphere-wssdk-provider/src/main/java/com/vmware/samples/wssdkprovider/VmDataProviderImpl.java

• Network - NetBIOS and working group

  Hello.

  Sorry if it's a little silly question, but I'm not very good with computers and just had a question about something. I get the fact that the NetBIOS name is generated on random based on the name of my laptop, but the fact in the "WORKING group" which means I'm connect to something or offers other computers to share files and so on, on with myself?
  

  It is only used if you file sharing with Windows machines.

  OS X Yosemite: set up a Mac to share files with Windows users

• VmWare View and working group

  You can install VMware View in a workgroup environment. What is the view installation sequence?. I tried to installed on a working group and it keep asking to connect to a domain during installation View Composer. Then I discovered that you must install sight connection to the server first, then composer. But the view connection server doesnot allow me to install in a workgroup environment. Thank you.

  In regards FT then is it not possible to have that between physical and virtual. Both machines must be virtual.

  It should be easy to connect your computers to a new network. Did you create a new vSwitch? The error messages?

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Profile of lost computer after the download and installation of IE8 for Yahoo.

  After you install internet explorer 8 for yahoo, my computer has lost my sysem profile, how do I restore my profile.  Favorites, outlook mail conection, shortcuts to programs, etc., lost.

  Hello

  ·         What is the complete error message you get?

  I suggest you follow the steps in troubleshooting section below and check if it helps:

  Problems with Windows XP if your profile is damaged

  http://support.Microsoft.com/kb/326688

  Also refer to:

  How to recover damaged Windows XP user profile

  http://support.Microsoft.com/kb/555473

• No internet connection when the Working Group has changed.

  I changed the workgroup from my XP machine the same as my Windows 7 computer so that I could have access to a printer, restarted, and now I can't access the internet.

  I changed it back and still no access.

  I use McAfee firewall and have checked all the settings, turned off the firewall and no change. (It is back on again)

  I have connected to another network wifi locally and not always no connection.

  I can ping my router and Windows 7 computer.

  What happened and how can I get it back?

  A big thanks to all respondents, he sweat finally it was McAfee which was causing the problem, it just took McAfee four days to notice there is another pc on the network and him to be confident!

• Will it hurt my settings if I change my Windows Vista PC from a computer in working group on a home PC?

  I have a Windows Vista Home Premium, I had some problems and had to do a system restore. I put a different name for my computer, I am the administrator. I did have the time to add a user account. Anyway, I wasn't paying that much attention to the WORKING GROUP or the HOUSE of CP. I feel that I can have messed up things, once again! I'm afraid that if I change the name or change the name of my computer and change it to page HOME of CP instead of WORKING GROUP, I have will not have access to Microsoft Internet Explorer? I don't see anything regarding a field in this area. Could someone help me with this, I want to change my WORKING GROUP home of CP.

  Hello

  You can change the name of your computer as the computers on a network can be part of a workgroup or a domain. The main difference between the areas and working groups is the management mode of the network resources. Computers on home networks are usually part of a workgroup, and computers on networks to work are usually part of a domain.

  Change the name of your computer

  For more information, you can consult the links below.

  What is the difference between a domain and a workgroup?

  Join or create a workgroup

• Network working group or an area for small businesses

  Hi all!

  Hi, I am facing a problem whenever someone asks me what kind of network is better for a small business, a network of workgroup or a domain?

  Could someone help me to find information on the benefits and disadvantages of each of them for a small business? In this way I permanently erase this doubt.

  Thank you!

  Sincerely,

  Jack.

  Hi Jack,

  Networked computers can be part of a workgroup or a domain. The main difference between the areas and working groups is the management mode of the network resources. Computers on home networks are usually part of a workgroup, and computers on networks to work are usually part of a domain.

  In a working group:

  • All computers are peers; no computer has control over another computer.
  • Each computer has a set of user accounts. To connect to any computer in the workgroup, you must have an account on this computer.
  • There are usually no more than twenty computers.
  • A working group is not protected by a password.
  • All computers must be on the same local network or subnet.

  In a field:

  • One or more computers are servers. Network administrators use servers to control the security and permissions for all computers on the domain. This makes it easy to make changes because the changes are automatically made to all computers. Domain users must provide a password or other credentials whenever they access the field.
  • If you have a user account on the domain, you can connect to any computer on the domain without needing an account on this computer.
  • Probably, you can only make changes limited to the computer settings because network administrators often want to ensure consistency between computers.
  • There may be thousands of computers in a domain.
  • Computers can be on different LANs.

  A workgroup is a network infrastructure of base with a soft security check and there is basically no administrative center central control.
  A workgroup is more synonymous with small networks - one where it does not guarantee to have a network of installed field. With a working group, no other additional computers are needed and by far the cheapest Setup for an internal LAN.

  However, one area is more complicated and more suited to large companies with many computers and departments within the ministries as a university structure or the structure within Microsoft Corporation.
  The areas have additional computers to oversee the safety and normal operation of the company's computers and data sharing is a priority.

  You can see the following link for more information:

  Join a domain or a workgroup

  http://Windows.Microsoft.com/en-CA/Windows-8/join-domain-workgroup-HomeGroup

  Please do not hesitate to answer, in case if you need help or information on this issue.

• How to remove a computer from my working group under XP and Windows 7?

  We have recently implemented a network composed of our three computers (2 XP) Home Office and 1 Windows 7 to share files and printers.

  However, we found its malfunction and could not share what we expect.  One of the reasons, we can see it, could be one of the computers have been infected.

  So, we try to remove this computer from the working group.

  However, no matter how hard I searched on Internet, there is no way to remove the infected computer's existing working group.

  There that experts can help us?

  Thank you very much!

  Hello

  You cannot remove a computer from a working group, but you can change the name of the working group.

  http://support.Microsoft.com/kb/295017

  http://www.SevenForums.com/tutorials/51711-workgroup-name-view-change.html

  But that will not necessarily mean that they are not accessible by other computers on the network, or it will necessarily make the other less likely to be infected through this PC computers.

  The only way to "withdrawal" of a computer on a network is to unplug the network cable or remove the name of the wireless network.

  If you are concerned about a possible infection, you must get the malware to day and scan for malware protection.

  However, I suspect it's more likley your problems are caused by the lack of knowledge in the topic network different Windows operating system. This can help...

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  If you are having specific problems post back with details and someone will almost certainly try to help.

  Tricky

• Need help setting up a network home wireless to the working group. I tried everything I read and nothing has worked. I got lost.

  I just received a more recent laptop and wants to set up a network so I can transfer files back.  It seems that it would be a fairly simple network to set up, but obviously I'm missing something.

  It must be a wireless network.  I have a wireless router, two Toshiba laptops, running a Windows 7 and the other runs Windows 10, and I have a printer.  I can access internet with laptops or both if the router does not seem to be the issue.

  I read articles that said I had need of a homegroup, but that did not work.  Then I read an article saying since my computers running different operating systems, that I couldn't use a homegroup that I should use a workgroup.  I followed the instructions given in the article and which don't seem to work either.

  The names of working group on both computers are the same and so are the passwords.  The computer names are different.

  I was on the old computer and when I go into Windows Explorer, under network, I can see the two names listed, however, when I click on the other computer, I get a message saying that the computer is not on the network.  I got the internet service at the time so the router was working.  Another time I tried to copy a small file to the other computer and the message said I didn't have permissions to do so.  I got the same message when I tried to add a folder to the other computer in the network area in Windows Explorer.  I get the same types of messages when I try things peers, while on the new computer.

  Any suggestions would be greatly appreciated.  So far, since I got the new laptop, I spent nearly three weeks, trying to get things to work.  This seems to be the biggest challenge of all.

  Hi Carole,

  Thanks for posting your query in Microsoft Community.

  Let me suggest you refer to the article below which will help you to set up HomeGroup from start to finish.

  Homegroup from start to finish

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Hello, I need your help to solve the system properties and I do not know what name on desscrition of the computer and the computer name and the group working on my sysstem thanks properties panel right

  Roy - Is PC on the description of the computer good?

  Hey red,

  What operating system is this?

  Do you mean under System properties, it stands as the Working Group and Roy - pc as the name of the computer?

  Your question is Roy - PC computer Description is right?

  Answer is Yes, the installation if you provided the user name as Roy, then it will be displayed as Roy - pc.

  If is computer autonomous you would see as a working group under System Properties

  Click on the link below to view information about your computer
  http://Windows.Microsoft.com/en-us/Windows7/view-your-computer-information

  Kind regards

  Kiki

• Every time that I start my computer, my 'wired' internet says network not identified, and I can't connect and I activate the router market?

  This only happens when I start my computer,

  I use windows 7
  I have acustom made
  Care,
  AMD athlon ii x 4 645 3.10 ghz processor
  NVIDIA geforce GTX 550 ti
  8 GB RAM
  and the 64-bit operating system
  If you need to know anything else please ask me :D

  Hello

  Thanks for posting the request in the Microsoft community forums!
  As I understand that when start you the internet computer says "wired says unidentified network". To get this fixed number, try the suggestions:

  1. which antivirus software is installed on the computer?
  2. don't you make changes on the computer before the show?

  Try the troubleshooting steps and check whether the problem is resolved.

  Method 1:
  Try the steps in the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  Try to disable firewall and antivirus installed on the computer software and try to connect to the internet:

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: disable the Windows Firewall and antivirus may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 3:
  You can also reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Links:
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• I have a license of creative cloud in design and I use a no cloud of photoshop 5.5 version. I only have photoshop installed and works on both computers. When I connect to internet I can't use photoshop on my main computer. Maybe it's that I had

  I have a license of creative cloud in design and I use a no cloud of photoshop 5.5 version. I only have photoshop installed and works on both computers I know. My desktop and my laptop. When I connect to internet, I am now unable to use photoshop on my main computer. It may be that I had photoshop on an old computer that I use is no longer, but I'm not sure. How can I get this sorting? Do I know if I have an activated copy on an old computer (which has been scrapped) and get it off?

  If you had Photoshop working already on the machine, then it probably isn't a problem of activation.

  If you do not have to Support Adobe disable to you it must be done for all installations since each machine cannot be targeted by them.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  This could apply: how we prevent cloud creative resume my perpetual license CS6?

  https://forums.Adobe.com/thread/1584746