Synchronize the pci-6254 and cDAQ-9174

Similar Questions

• 2000-2d19wm HP: I need drivers for the PCI device and SM Bus controller

  I have a Hp 2000-2d19wm and I have downgraded to win8 to win7. Now I am trying to install the drivers and I can't find it on the HP website. Please help me.

  Hello:

  You need this driver for smbus controller...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_118001_1

  You need this driver for the PCI Dev:

  Realtek card reader driver

  File name: sp64801.exe

• synchronize the outputs digital AND digital NI USB 6343 entry

  Hello

  I use NI USB 6343 to fly 1 TTL devices. This device can also produce a TTL signal to indicate if the door is opened/closed.

  I use digital Bool 1 line 1 Point. I was able to reverse the opening/closing of the door on time. But I would like to synchronize the DI and DO it right.

  I tried to throw in the clock aboard, but he failed.

  Is it possible to synchronize the DI and DOI onbaord/hardware clock?

  Any idea will be great!

  Thank you!!

  Hello

  Synchronization of your tasks of DI and shouldn't be possible with your device. You'll need them timeless has a clock that is usable by both. This information is available in the X series user manual

  http://www.NI.com/PDF/manuals/370784f.PDF
  PG 6-9 and 6-13

  You can also find information and examples of synchronization of the various tasks in the article below.
  http://www.NI.com/product-documentation/4322/en/

  Good luck

  Eric

• Need help on the use of the PCI-6221 and c# to control three digital Port and an analog of entry

  I need to send the digital output at three ports and then read an analog input voltage using the analog card PCI-6221.

  I did a c# program to fight against it. I built four tasks altogether. Three tasks for three digital output ports and a single task for analog input.

  How can I reduce the time?

  Using my method, to 3.3ms in total. And it's slow.

  I can build one task for three ports?

  What is the best way to the control task to reduce the time of communication with the PC?

  Is that possible to save a lot of analog reading entry in the memory of the DAQ hardware and then read it all together from the computer in order to reduce time consumption?

  1 million thanks!

  Hello

  Hi Jin,

  To answer your questions, Yes, you are able to configure a task of digital output to use three output ports and PCI-6221 has a buffer of memory FIFO aboard 4095 samples.

  I would like to direct you to the example of NOR-DAQmx for c# files located in the following location on your computer

  C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DotNET2.0

   

  Here, you will find predefined examples in c# that should give you a good idea of how to go about architecting your code to achieve the results you need.

  There is also a useful help file which you will find by navigating to Start > all programs > National Instruments > NOR-DAQ > help of NOR-DAQmx .NET Framework 2.0

  I hope that this answer is useful.

  Best regards

  Steve H

• Synchronize the beetween HSS and planning question

  Hi all
  
  Product: Planning 11.1.1.2
  
  We had a problem on the server HSS and we cannot restore file OpenLdap.
  We had to re-create groups on HSS, but these groups are not synchronized with the planning groups (I guess that different SID)
  
  Do you know if the UpdateUsers utility I synchronize SID between HSS and planing?
  If this is not the case, do you think I can change the SID directly in the tables of HSS or repository of planning so that the two will be the same?
  
  Is there another solution?
  
  Thank you very much
  
  Sébastien

  If users were the provision of Shared Services, then you can give the utility updateusers a go and see if it syncs the planning tables save with Shared Services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• using a friends computer to synchronize the old phones and ipod

  Please if anyone can help me with this I would appreciate it.

  My laptop is dead and I use my phone to friends.  I want to synchronize my more old phones & ipod which has all my music which has been purchased and downloaded from my cd and then sync it to my iphone 6plus.  I bought ringtones that they came my new phone?  My friend is ok with my removing all their music off the laptop computer, since they have another and it on their icloud anyway.

  Thank you!

  See recover your iTunes from your iPod or an iOS device and also make a library of portable split. If you are recovering your library to a portable external drive, it will be ready to move to your replacement computer, the time is right.

  TT2

• How to synchronize the analog input and the output of two different USB data acquisition boards

  Hi all

  I have two tips very different USB NI USB 6008 case, which I use to acquire the data (analog input) and a USB of NI 9263 is a output analog only site I use to route a signal (in this case a square pulse). The reason why I use the outputs analog 6008 is because I need to deliver negative tension and need the full +/-10 v range.

  Looking at similar positions, I'm pretty sure that I can't use an external trigger or a common clock, I also tried to use the timed synchronization of the structures but no cigar.

  I'm including a quick vi I whipped showing how the jitters because of the lack of synchronization signal. The OD of the 9263 connects to AI in the 6008 in this example.

  I talked to a specialist in the phone and tols me that's not possible.

• Easy way to synchronize the audio left and right, from different sources?

  I mainly filmed concerts of a single camera using a Sony Z1 - when they are available, I'll take a sound card feeds channel 1, and a live auditorium feed a microphone mono channel 2. Because of the distance of the scene (and light is faster than sound, etc.), the power of the sound card is synchronized with the video and power of the auditorium is between 1 and 3 frames behind. Is there an easy way for me to take the tray clips together and just move this auditorium feed back in sync with the video and sound card feed, raw clips?

  Previously, I did this by dropping the clips to the timeline, done to separate tracks, sliding manually sync on the auditorium that feed by the required number of frames and link everything back up again. Synchronize audio visually using the waveform display (before first CC).

  I have two problems with this in Adobe first CC. First, the audio waveforms are not like waveforms more (and it doesn't seem to be possible to change the display to the old way?). So now that I am syncing the auditorium that feed in sound only, because I don't see anything on the screen to sync any more - both channels just look like random noise (or almost).

  Secondly, I film some events of multi camera, and of course, I'd like to be able to use the new functionality of synchronization for the multicam. But I know in advance that the audio channels on all the clips are not synchronized with the video (the camera powered by the sound card will be synchronized, the camera takes live food out as indicated above). Surely, there must be a way where I can fix the sync audio to video on raw clips first, before you say Adobe to synchronize based on the audio clips? Otherwise it will all be misaligned and require adjustment of the manual sync anyway? Again, what I've done previously is set of benchmarks on the identical frames, multi camera sync (so the video is now just good) and then manually set the audio synchronization before editing.

  In the context menu for the timeline, you can uncheck rectified of Audio waveforms for their return to normal.  (I wish that Adobe does not have this as default.  It's just weird.)

  But to synchronize, you can only do in the order.

• Need help to synchronize the pre-production and production box init parameter

  Hello
  
  I have a HP - UX 11i production database. The database is the CARS with 3 instances. The storage is on ASM. Recently, we have created a database of pre-production for tests on RedHat Linux 4 worm. Here are the details of the environment 2:
  
  Production: HP - UX 11i, 24 GB of RAM, 8 CPU, Oracle 10g R2
  
  Pre-production: RED HAT ver 4, 16 GB RAM, 4 CPUS, Oracle 10 g R2
  
  Basically everything in creation the two environment are not identical configuration. Now, I need to bring to the pre-production environment in harmony with the environment of Production from the point of view oracle init parameter. I have listed down below below the parameters that is different. Please tell me how many of these parameters can be bring in sync. Setting shmmax doesn't set on the two core area is 4 GB.
  
  Name of the parameter of V$, value on Production - value on the pre-production
  -----------------------------------------------------------------------------------------------------
  cpu_count----------------------------------8-------------------------------------     4
  CURSOR_SHARING - EXACT - FORCE
  db_recovery_file_dest_size - 32212254720 - 15032385536
  dml_locks----------------------------------1472----------------------------------748
  fast_start_parallel_rollback - LOW - FALSE
  filesystemio_options - asynch - no
  LARGE_POOL_SIZE - 33554432 - 0
  log_buffer - 14493696 - 7012352
  log_checkpoints_to_alert - TRUE - FALSE
  open_cursors - 1000 - 300
  parallel_execution_message_size - 2152 - 2148
  PARALLEL_MAX_SERVERS - 160-80
  pga_aggregate_target - 2147483648 - 1692401664
  processes----------------------------------     300-----------------------------------150
  session_cached_cursors - 100-20
  sessions------------------------------------     335-----------------------------------170
  SGA_MAX_SIZE - 5368709120 - 675282944
  SGA_TARGET - 3221225472 - 675282944
  sql92_security - FALSE - TRUE
  standby_file_management - MANUAL - AUTO
  transactions - 368-187
  UNDO_RETENTION - 10800 - 1800
  
  Thank you

  NOTE: You must be a query V$ PARAMETER ISDEFAULT = "FALSE" only to identify the paraemters which are or have to be defined.
  You must identify these paraemters which are explicitly defined by the DBA, rather automatically determined by Oracle.

  1. you do not explicitly set or change cpu_count. Let Oracle automatically set it based on the number of processors / cores he sees as being available. (if you have multiple instances of database on the same server, each instance will 'see' the same number of processors / cores)

  2 cursor_sharing must always be the same development, pre-production and Production. However, I would first of all ask allows you to determine why it has been set by the dint of Production. That must be done only after careful consideration and test!

  3 db_recovery_dest_file size is relevant for backups RMAN identified by db_recovery_dest disk space. If it is not relevant to this discussion.

  4 dml_locks, sessions, transactions, etc. are all automatically determined by Oracle based on the PROCESS.

  5 fast_start_parallel_rollback is irrelevant. I wonder why it has been explicitly defined?

  6 filesystemio_options really depends on your platform. HP - UX 11i and Redhat Linux are very different.

  7 are defined explicitly large_pool_size and log_buffer? Or they remain to be determined automatically by Oracle based on other parameters (SGA_TARGET for example)?

  8 open_cursors, generally not be set unless you have an application that really opens up very many cursors by session. Why is defined differently? It is a per session setting.

  9. I suppose that parallel_max_servers is not explicitly defined, but remains to be determined by Oracle based on other parameters (for example cpu_count).

  10. I wonder if parallel_execution_message_size has been explicitly defined or is automatically defined by Oracle and OS dependent.

  11 pga_aggregate_target would have explicitly set the appropriate value based on your hardware and its use must be determined.

  12 session_cached_cursors generally didn't need to be explicitly defined. If it is set, why he is set on these different values?

  13. Why is SQL92_SECURITY explicitly different?

  14 standby_file_management is not relevant here.

  15 undo_retention could be about the same.

  Your REAL concern should be the values defined for CURSOR_SHARING and SQL92_SECURITY. These are the only ones who are really identical in both environments. The others are "setting buttons" while these "fix"behavior ".

  Hemant K Collette

• Synchronize the outlook contacts and calendar

  I use Microsoft outlook on my laptop.  I want to be able to sync my contacts and calendar for iPad, mini iPad and iPhone without using iCloud or glasses.  There must be a way to do this.  If I update a calendar item or contacts on my iPhone I would also update on my laptop and other devices.   I see a lot of discussion about using iCloud or Google product for this.   I know that I can use iTunes and contact my devices in this way so they will update, but I was hoping that there is an easier way.

  https://iTunes.Apple.com/us/app/Microsoft-Outlook-email-calendar/id951937596?Mt= 8

• Difference between the cDAQ-9174 and cDAQ-9178

  I have several cRIO-9081.  Each cRIO-9081 running NOR-DAQmx 15.5.  On four of the cRIO-9018 we show you cDAQ - 9178 with 8 modules.  Everything just worked.  On the fifth cRIO-9018, we tried to connect a cDAQ-9174.  The aircraft appeared in the Windows Device Manager and MAX, but MAX has indicated that the aircraft was missing (error-88705) and that Windows can't find a driver for the instrument.

  We then plugged a cDAQ-9178 in the fifth cRIO and everything just worked.

  What is the difference between a cDAQ-9174 and cDAQ-9178 other than the number of the module support?

  Paul

  Hi Paul,.

  It seems it could be a driver problem! What DAQmx version you have installed on two computers? Reinstall the latest version may be worth it because it looks like there may be corruption. You can find the latest version here: http://www.ni.com/download/ni-daqmx-15.5/5901/en/

  You can manually associate the device driver, here: http://digital.ni.com/public.nsf/allkb/5B80CAAA64413B4C86256C5E0000C1A7

  There are modules connected to the cDAQ chassis?

  Also, sometimes, this can happen if you do not restart your computer after the installation of the NOR-DAQmx driver. Restart your computer after the driver installation will allow you to reserve the device successfully. Here are a few others not to try:

  • Check the charger to device OR to see if it is running
  
  
  • Reset the service OR charger
  
  
  • Reset the MAX Configuration database
  
  
  • The system power cycle

• Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?

  Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?  If Yes, where is it documented the series cards can do trigger?  For example, is it possible to configure the trigger on the PXI-6124?

  Hi Joel_Neptune,

  The PCI-6110 and other materials as the PXI-6115 S series and SMU-6124 do not natively support NOR-DAQmx analog input alarm. However, you can use one of the generalist counters/timers of the Council to generate a reenclenchees pulse train, then use this as the sample clock pulse train. This transportation example shows how:

  LabVIEW\examples\DAQmx\Synchronization\Multi-Function.llb\Multi-Function-Ctr Retrigg Pulse Train generation for the Clock.vi sample

  In addition, the new material of the simultaneous sampling X series are supported trigger analog input without using a separate task of counters/timers.

  Brad

• Card PCI-6254 DAQ,

  Hi guys,.

  I am looking to buy the PCI-6254 DAQ card, but I'm a little confused, ive never used Renault usb. My question is if I get the dose of pci card that it fit on the motherboard on my computer or do I need some sort of chassi? and other things to go with it? Sorry, but I'm only to discover

  Thank you

  Stephen

  Hello Stephen,

  The PCI bus is a bus standard for PC available in desktop PC since the middle of the 1990s.  Many offices always come with at least a PCI slot, however, do not forget that many PC manufacturers make PCs thinner or smaller office for aesthetic purposes, which means that the PCI card that many not physically fit to width or length.

  If you are in the United Kingdom, please dial the 01635 523545 to speak to a sales engineer in the branch NI UK. Otherwise, please call your local branch and someone will help you determine if this PCI card for your PC and your application.

  Best regards

• Satellite M40X driver PCI Device and NetworkController problem.

  Hello..

  I formatted my German original OS version for the English version. I downloaded all the drivers from the toshiba site and installed. The/CompuMgr/DeviceManger /AdminTools of /ControlPanel of system, I see that the drivers for the PCI Bus and network controller are missing.
  Any suggestion on which driver files may resolve this problem.

  Thanks in advance
  Shine

  Hello

  As Tobi said check the installation instructions. It has listed all the necessary drivers and tools and utilities. As far as I know this list is also important because it is a proper installation order.

  Good bye

• PCI device and SM Bus, MISSING controller and impossible to INSTALL - HP Pavilion g4 1264ca

  I had recently done a clean install on my laptop and when I rebooted, it was missing the drivers for the PCI device and SM BUS controller. When I go to Device Manager and try to reinstall or search the hardware changes, my computer is unable to install. Also, I was missing my network Ethernet and wireless drivers, but I installed the appropriate via the HP website drivers. However, still miss me these two pilots. I tried to install on my laptop, but just AMD chipset, which creates more problems because once the program asks me to restart the computer it remains stuck to the Windows loading screen (rotation around the Windows logo colors). If someone could find the right drivers for me download or ways to diagnosis this problem, any help will be greatly appreciated.

  Laptop model: HP Pavilion g4 1264ca

  Hello:

  You should definitely the amd chipset drivers to install the smbus controller.

  Here's what I've done for you...

  I have zipped and attached just the driver files raw you must install manually only under attachments below smbus controller.  As you saw that the chipset driver file contains a lot of other things as well.

  Unzip the files in a folder.

  Go to Device Manager and click the controller smbus needing drivers.  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.   Then restart.

  The PCI device is the card reader that needs a driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&product=5186397&sw_lang=