SYSDATE post external table in the format 'YYMMDD '.

Similar Questions

• Creating external Tables using the EXECUTE IMMEDIATE in PL/SQL

  Hi guys,.
  
  I am trying to create an external Table using the EXECUTE IMMEDIATE in a procedure and I managed to compile and no errors were generated. But when I try to run it from sql using the exec command I get the following error:
  
  ------------------------------------------------------------------------
  ERROR on line 5:
  ORA-00911: invalid character
  ORA-06512: at "GEO. TEST_DDL', line 4
  ORA-06512: at line 5
  
  -------------------------------------------------------------------------
  
  I tried to check the whole statement to create the external table, but I can't find where is the error. Surprisingly, if I simply run the command table create external on sqlplus it works, but not a procedure.
  
  If anyone can help with ideas or experience?
  
  Geoffrey Kossami

  The error means that there is an identifier somewhere that starts with a nonalphanumeric. This is a typical mistake of editing. A procedure compiles correctly is not of course because the underlying dynamic sql running is OK. Which of course only be resolved when you try to run it.

  There is certainly a problem with the text you provide to be run as a piece of dynamic sql code. You should try to watch it with dbms_output and run this code in sqlplus. But your problem is with the code you run as dynamic PL/SQL, it is not itself compilable.

  Jack

• External tables and the separator of...

  Does anyone know how to export data with a custom delimiter when you use the datapump api or external tables?

  JohnL says:
  Does anyone know how to export data with a custom delimiter when you use the datapump api or external tables?

  DataPump does not use any delimiter.

  If you use UTL_FILE to write 'external table', normally called the OS file;
  you are free to format the content in any way you want

• Access to an external table via the display in the UCM configuration manager problem

  Hi all

  I know that this question is already asked here: to access the external tables in DB / in UCM Applet configuration manager but the conversation has already been archived, and I can't comment there. I'm following approach given by William Phelps in above said archived thread.

  I am able to create dblink with data remote and created the view by using the linked table in my diagram of the Complutense University of Madrid. The problem that I face is that this point of view such as told by William is not visible in the configuration manager. Although I tried to give (create view and create all views) system diagram University Complutense of MADRID user privileges, but I'm not sure that it will also provide access rights. I am using the SQL Developer and working at the University Complutense of MADRID 11 g.

  All comment or suggestion will be a great help.

  Stéphane yapi

  The value of this configuration variable: EBRIncludeViewsInTableList = 1

  https://jonathanhult.com/blog/2013/11/use-database-view-WebCenter-content-schema-view/

  Jonathan

  http://jonathanhult.com

• External table with the preprocessor file to display the list of files

  Hello

  in my db 11.2.0.2 I would create an external table with script preprocessor to show me the list of files in a directory.

  Preprocessor banally:

  #! / bin/bash

  CD/MyDir

  / bin/ls-l *.txt 2 >/dev/null

  The problem is the file name that contains white space (style windows in a Linux env), for ex:

  -rw - r - r - 1 oracle oinstall 920 9 Jun 17:37 File1.txt

  -rw - r - r - 1 oracle oinstall 72316 Jun 10 10:37 file GC output1.txt

  -rw - r - r - 1 oracle oinstall 72316 Jun 10 10:40 GC file output2.txt

  So I can't use FIELDS DELIMITED BY "". ""

  FIXED size? No, because the file size change the length of the lines.

  I tried to use awk in my preprocessos script, but I have the same problem:

  
  

  / bin/ls-l *.txt 2 >/dev/null | / bin/awk ' {printf "%s %.2d %s %s\n", $6, $ 7, $ 8, $9} '.

  
  

  Any ideas?
  

  Hello

  I used java to retrieve information about the files.

• External table with the field tab delimiter

  With the help of Oracle 11 g Release 2

  Here is my table create statement external:

  CREATE TABLE global.ext_a_attrib_cmt
  (   tag      VARCHAR2(255)
    , from$    VARCHAR2(255)
    , to$      VARCHAR2(255)
  )
     ORGANIZATION EXTERNAL
  (  TYPE ORACLE_LOADER
     DEFAULT DIRECTORY EXT_DATA_DIR
        ACCESS PARAMETERS
          (  RECORDS DELIMITED BY NEWLINE 
             SKIP 1
             BADFILE EXT_BAD_DIR:'a_attrib_cmt.bad'
             LOGFILE EXT_LOG_DIR:'a_attrib_cmt.log'
         --    FIELDS TERMINATED BY 0X'09' -- TAB delimited  
             FIELDS TERMINATED BY '\t'
             OPTIONALLY ENCLOSED BY "'"
             MISSING FIELD VALUES ARE NULL
             REJECT ROWS WITH ALL NULL FIELDS
          )
        LOCATION ('a_attrib_cmt.txt')
  )
     REJECT LIMIT UNLIMITED
     NOMONITORING
  /
  

  Here is the text file, a_attrib_cmt.txt:

  tag	Of	TO
  FrontSpringType_id	Coil	w/FRONT COIL SPRINGS
  FrontSpringType_id	Sheet	the FRONT/w suspension SPRINGS
  Aspiration_id	Naturally aspirated	w/o TURBO
  Aspiration_id	Turbocharged	w/TURBO
  Aspiration_id	Supercharged	w/COMPRESSOR
  SteeringType_id	Grid	w/RACK and PINION STEERING
  SteeringType_id	Gear	w/GEAR STEERING
  FuelDeliveryType_id	CARB	w/o FUEL INJ
  FuelDeliveryType_id	FI	w/FUEL INJ
  BedLength_id		?" BED
  BodyNumDoors_id		? DR
  BrakeSystem_id		w / ? BRAKES
  FrontBrakeType_id		w/FRONT? BRAKES

  PUBLIC has privileges to write to the directory EXT_DATA_DIR.

  Here is the error I get:

  Globall@ORA1 > select count (*) in the ext_a_attrib_cmt;

  Select count (*) in ext_a_attrib_cmt

  *

  ERROR on line 1:

  ORA-29913: error in executing ODCIEXTTABLEOPEN legend

  ORA-29400: data cartridge error

  KUP-00554: error occurred when parsing the access settings

  KUP-01005: syntax error: found 'minussign': expected an a: "badfile, bigEndian, characterset, column, data, delimited, discardfile,

  disable_directory_link_check, fields, fixed, charge, logfile, language, nodiscardfile, nobadfile, nologfile, date_cache, preprocessor, TailleLue, String, jump,

  territory, variable.

  KUP-01007: line 5, column 8

  Just get rid of the comment line. You cannot cave comments to create external table statement. SY.

• External table with the empty file

  Hello

  My version of db: Oracle 11 g

  I have a csv file that is empty.

  I created an external table the empty csv file.

  When I run:

  Select count (*) in the externaltblname;

  It returns 1.

  It should return 0 to the right.

  In the definition, I specified "SKIP 1.

  But he always returns 1.

  When I use this external table to load into a table target. It loads a single row with null values.

  How to solve this problem. Please advice.

  What works for me is the following (t_ext points to a blank csv):

  SQL > select count (field) in the t_ext;

  COUNT (FIELD)

  ------------

  1

  1 selected line.

  SQL > select ascii (field) in the t_ext;

  ASCII (FIELD)

  ------------

  13

  1 selected line.

  SQL > select count (replace (field, chr (13))) of t_ext;

  COUNT (REPLACE (FIELD, CHR (13)))

  -----------------------------

  0

  1 selected line.

• External table for the file delimmited by commas

  Im trying to create a table of externla for the comma-delimited file
  but it also has a scenario where the fields can have a comma between "" e.g.
  
  example of record
  

  1,one,first
  2,two,second
  3,three,third
  4,four,"4,fourth"

  Example of table
  

  create table ext_table_csv (
    i   Number,
    n   Varchar2(20),
    m   Varchar2(20)
  )
  organization external (
    type              oracle_loader
    default directory ext_dir
    access parameters (
      records delimited  by newline
      fields  terminated by ','
      missing field values are null
    )
    location ('file.csv')
  )
  reject limit unlimited;

  So when I question this record 4 table of Externla will be read as
  
  M/2
  

  i           n                      m
  4         four     "4
  {code}
  Above Ext table is just an example, Im adding bad file and log file in real table.
  
  Please help me if there is a way this can be resolved with external table.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

  Change the definition of:

  FIELDS TERMINATED BY ', '.

  TO:

  FIELDS ENDED BY ',' POSSIBLY FRAMED BY "" "

• Automatic filling of the field Date in the text field to the Format YYMMDD

  Hello

  I need to automatically populate a text field with a date that is entered in a date field. I was able to do this, but I couldn't find a way to have him fit in the text as YYMMDD field (with no spaces, dashes, etc) instead of "MM/DD/YY" as it is displayed in the date field.

  Could someone help me with the right code?

  Best regards

  ZeroZone110

  I don't know if it's the best option, but here is a workaround...

  using formcalc you can format your date fields

  var myDate = Date2Num (DateField1.rawValue, "YYYY-MM-DD")

  var format = Num2Date (myDate, "YYYY-MM-DD")

  TextField2.rawValue = format

• Get the data in the table in the format of number

  Ive got this table with numbers in it, that I want to use for some simple calculations, but I get the message that the data in the table is not a number:

  The whole is in a loop for, with teller1 as in ascending order.

  code:

  var xco:Array = [180,233,271,292,292,270,231,179,124,74,34,11,9,30,70,121];
  var yco:Array = [11,33,73,124,181,232,270,290,291,271,234,183,125,72,33,11];

  for (var teller1 = 1; teller1 < 33; teller1 ++) {}
  var ringsegment_mc:Ring_1 = new Ring_1();
  ringsegment_mc.x = XCO [teller1] + kernplaats;
  ringsegment_mc.y = yco [teller1] + kernplaats;
  ringsegment_mc.addEventListener (Event.ENTER_FRAME, vernietig);
  addChild (ringsegment_mc);
  {Switch (teller1)}
  box 16:
  kernplaats = Math.Random () * 600 + 300;
  kernplaats = Number (400);
  trace (yco [teller1]);
  trace (yco [teller1] + kernplaats);
  }
  }

  If the trace functions are:

  undefined

  NaN

  so I tried to use this:

  trace (yco [3]);
  trace (yco [3] + kernplaats);

  who gave this:

  124

  524

  If something goes wrong in trying to read the table, but what? and how can it be solved.

  I don't know what you're after, but if you want to use the same loop twice, then put it inside another loop... (Note that arrays start at index 0, not 1)

  for (var i = 0; i)<2;>

  for (var teller1 = 0; teller1<16; teller1++)="">
  var ringsegment_mc:Ring_1 = new Ring_1();
  ringsegment_mc.x = XCO [teller1] + kernplaats;
  ringsegment_mc.y = yco [teller1] + kernplaats;
  ringsegment_mc.addEventListener (Event.ENTER_FRAME, vernietig);
  addChild (ringsegment_mc);
  {Switch (teller1)}
  box 16:
  kernplaats = Math.Random () * 600 + 300;
  kernplaats = Number (400);
  trace (yco [teller1]);
  trace (yco [teller1] + kernplaats);
  }
  }

  }

• External table Oracle via the Tables API

  Hello world

  I did experiment with the Oracle NoSQL database recently and I became a bit stuck with the new API of Tables. I have so far successfully of the external tables on the data entered using storage techniques 'vanilla' KV and avro (using generic and specific links) scheme, but create API Tables seems to be another matter entirely.

  My question arises in the trainer interface, which has a KeyValueVersion and a KVStore. I can't translate a KeyValueVersion created with the API of Tables in a primary key for recovery (since I don't know what the key generated by the API actually looks like to!) or map it on an avro scheme. The problem seems to be that the Tables API writes data in some format that can be easily translated into a string or an integer (releases from external table lines due to unknown characters if I am trying to retrieve all the values in the database to see what it looks like to), and try to map it to an AVRO map results in the error message 'the data are not as AVRO'.

  Scenario:

  I created a very simple table in the administration tool KV, which consists of a column personId (integer) that is PK, firstName, lastName, emailAddr (all channels) and enter 5 rows with success. What I want to do is to create an external table called person that returns just those 5 values (and brand new I add to the table of course). This means that I have to first understand what the parentKey value must be defined in the .dat file and how to take this key and it becomes a primary key for the recovery of the line.

  Faithful old Google could not find information on how to do this (he was only a thread similar to this with the answer "we'll add it soon"), so I hope that someone here managed to do!

  Thank you

  Richard

  Hi Richard

  I understand the issue you are facing. In the current version (12.1.3.0.9) the external tables feature only works with records of K/V not with the Table model, however, in the next version (which us will very soon be GA) we will support integration of external tables with the data of Table model as well. Please make sure that you have signed up for the announcement of release so that we can inform you of the release. I apologize for the inconvenience, he did to you.

  Best

  Anuj

  Sign up for announcements of NoSQL database , so we can warn you versions futures and other updates from the product of NoSQL database

• The issue of external Table...

  Hello world
  
  I am new to working on 'EXTERNAL TABLES'. Is it possible to add another column (what is not
  in the flat file) with a "default"?
  
  I'm just trying to create a simple TABLE 'EXTERNAL '...
  
  question 1
  ==========
  

  EX:
  ===
  
  Flat file that i get will be like this (sample)
  
  ENG,England,English
  SCO,Scotland,English
  IRE,Ireland,English
  WAL,Wales,Welsh
  
  If i create a external table like the following everyting would be fine..
  
  CREATE TABLE countries_ext (
    country_code      VARCHAR2(5),
    country_name      VARCHAR2(50),
    country_language  VARCHAR2(50)
  )
  ORGANIZATION EXTERNAL (
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY ext_tables
    ACCESS PARAMETERS (
      RECORDS DELIMITED BY NEWLINE
      FIELDS TERMINATED BY ','
      MISSING FIELD VALUES ARE NULL
      (
        country_code      CHAR(5),
        country_name      CHAR(50),
        country_language  CHAR(50)
      )
    )
    LOCATION ('Countries1.txt','Countries2.txt')
  )
  PARALLEL 5
  REJECT LIMIT UNLIMITED;
  
  but i need another column with a "default value" "N"  which is not in flat file
  
  CREATE TABLE countries_ext (
    country_code      VARCHAR2(5),
    country_name      VARCHAR2(50),
    country_language  VARCHAR2(50)
  )
  ORGANIZATION EXTERNAL (
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY ext_tables
    ACCESS PARAMETERS (
      RECORDS DELIMITED BY NEWLINE
      FIELDS TERMINATED BY ','
      MISSING FIELD VALUES ARE NULL
      (
        country_code      CHAR(5),
        country_name      CHAR(50),
        country_language  CHAR(50)
      --,
      -- Valid_flag default value "N"  Is it possible to add this 
                                       column while creating the external table?
                                       this column is not there in the flat file.
      )
    )
    LOCATION ('Countries1.txt','Countries2.txt')
  )
  PARALLEL 5
  REJECT LIMIT UNLIMITED;

  quetion2
  ========
  
   LOCATION ('Countries1.txt','Countries2.txt')
  
  I have multiple files (around 150) which are in the same format.
  Do i have to mention all the file names in the location clause? if i have to create a table 
  on those 150 file?
  
  Ex  LOCATION ('Countries1.txt','Countries2.txt','Countries3.txt','Countries4.txt','Countries5.txt','Countries6.txt','Countries7.txt','Countries8.txt', and so on....)
  
  or 
  
  Is it possible to put (countries*.txt)?

  Sorry if this topic discussed somewhere in the forum.
  
  Thank you
  Phani

  The external table requires the exact name of the file, it does not accept wildcards. If filenames are stable, just take the hit and list them all in the LOCATION once. If the file names are fungible Pretreat then screwed by them cutting in a single file, which is the only name in the LOCATION clause.

  Cheers, APC

  blog: http://radiofreetooting.blogspot.com

• How to select the csv data stored in a BLOB column as if it were an external table?

  Hi all

  (Happy to be back after a while! )

  Currently I am working on a site where users should be able to load the data of csv (comma is the separator) of their client machines (APEX 3.2 application) in the Oracle 11.2.0.4.0 EE database.

  My problem is:

  I can't use an external table (for the first time in my life ) so I'm a little clueless what to do as the csv data is stored by the application of the APEX in a BLOB column, and I'm looking for an elegant way (at least SQL PL/SQL/maximization) to insert the data into the destination table (run validations by a MERGER would be the most effective way to do the job).

  I found a few examples, but I think they are too heavy and there could be a more elegant way in Oracle DB 11.2.

  Simple unit test:

  drop table CBC purge;

  drop table dst serving;

  create table src

  (myblob blob

  );

  create table dst

  (num number

  , varchar2 (6) str

  );

  Insert in src

  Select utl_raw.cast_to_raw (1; AAAAAA ;'|| Chr (10) |

  2; BATH; »

  )

  Double;

  Desired (of course) output based on the data in table SRC:

  SQL > select * DST;

  NUM STR

  ---------- ------

  1 ABDELKRIM

  2 BATH

  Does anybody know a solution for this?

  Any ideas/pointers/links/examples are welcome!

  / * WARNING: I was 'off' for about 3 months, then the Oracle - the part of my brain has become a bit "rusty and I feel it should not be so complicated as the examples I've found sofar ' * /"

  Haha, wonder about regexp is like the blind leading the blind!

  However, it's my mistake: I forgot to put the starting position setting (so 1, 2, 3,... was in fact the starting position, not the nth occurrence. duh!)

  So, it should actually be:

  select x.*
  ,      regexp_substr(x.col1, '[^;]+', 1, 1)
  ,      regexp_substr(x.col1, '[^;]+', 1, 2)
  ,      regexp_substr(x.col1, '[^;]+', 1, 3)
  ,      regexp_substr(x.col1, '[^;]+', 1, 4)
  ,      regexp_substr(x.col1, '[^;]+', 1, 5)
  ,      regexp_substr(x.col1, '[^;]+', 1, 6)
  from  src
  ,      xmltable('/a/b'
                passing xmltype(''||replace(conv_to_clob(src.myblob), chr(10), '')||'')
                columns
                  col1 varchar2(100) path '.') x;
  

  Note: that's assuming that all the "columns" passed in the string won't be lame.

  If one of them might be null, then:

  select x.*
  ,      regexp_substr(ltrim(x.col1, ';'), '[^;]+', 1, 1)
  ,      regexp_substr(ltrim(x.col1, ';'), '[^;]+', 1, 2)
  ,      regexp_substr(ltrim(x.col1, ';'), '[^;]+', 1, 3)
  ,      regexp_substr(ltrim(x.col1, ';'), '[^;]+', 1, 4)
  ,      regexp_substr(ltrim(x.col1, ';'), '[^;]+', 1, 5)
  ,      regexp_substr(ltrim(x.col1, ';'), '[^;]+', 1, 6)
  from   src
  ,      xmltable('/a/b'
                passing xmltype(replace(';'||replace(conv_to_clob(src.myblob), chr(10), ';')||'', ';;', '; ;'))
                columns
                  col1 varchar2(100) path '.') x;
  

• How do I get the number of incorrect records when you use external tables

  Hi all, I have an external table DEPT,.

  DEPT. DAT

  20. ELECTRONICS

  10. SHOES

  30. CAMERA

  Select * from the Department; only 10 and 30 dept will be led as deptdescr for 20 that there are more than 10 in length so this record will go into the wrong file,

  y at - it count any query to display the folder or get any query to get the record to view the entries entries wrong file rather that will drop and see how much is rejected.

  Table:

  CREATE TABLE DEPT
  (
     DEPT        NUMBER,
     DEPTDESCR   VARCHAR2 (10 CHAR)
     )           ORGANIZATION EXTERNAL
    (  TYPE ORACLE_LOADER
       DEFAULT DIRECTORY BATCH_INBOX
       ACCESS PARAMETERS
         ( RECORDS DELIMITED  BY '\r\n'
                BADFILE  BATCH_BAD:'UPS_DEPT_LOAD_%p.bad'
                LOGFILE  BATCH_LOG:'UPS_DEPT_%p.log'
                NODISCARDFILE
      FIELDS  TERMINATED BY '|'
      MISSING FIELD VALUES ARE NULL
  (
  DEPT,
  DEPTDESCR
  )
                                  )
       LOCATION (BATCH_INBOX:'DEPT.DAT')
    )
  REJECT LIMIT UNLIMITED
  NOPARALLEL
  NOMONITORING;
  

  You can use the wrong file as the data file for another external table, with the entire line in a single field.  Please see the demo below.

  Scott@orcl12c > CREATE or REPLACE DIRECTORY batch_inbox AS 'c:\my_oracle_files '.

  2.

  Created directory.

  Scott@orcl12c > CREATE or REPLACE DIRECTORY batch_bad AS 'c:\my_oracle_files '.

  2.

  Created directory.

  Scott@orcl12c > CREATE or REPLACE DIRECTORY batch_log AS 'c:\my_oracle_files '.

  2.

  Created directory.

  Scott@orcl12c > CREATE TABLE DEPT

  2       (

  NUMBER 3 DEPT,

  4 DEPTDESCR VARCHAR2 (10 CHAR)

  (5) ORGANIZATION EXTERNAL

  6 (TYPE ORACLE_LOADER

  7 DEFAULT DIRECTORY BATCH_INBOX

  8 ACCESS SETTINGS

  9 (RECORDS DELIMITED BY "\r\n"

  10 BADFILE BATCH_BAD: 'UPS_DEPT_LOAD.bad'

  11 BATCH_LOG:'UPS_DEPT_%p.log LOGFILE'

  12 NODISCARDFILE

  13 FIELDS TERMINATED BY ' |'

  14 MISSING FIELD VALUES ARE NULL

  15       (

  DEPT 16,

  17 DEPTDESCR

  18       )

  19                       )

  LOCATION 20 (BATCH_INBOX:'DEPT.) DAT')

  21         )

  RELEASE 22 UNLIMITED LIMIT

  23 NOPARALLEL

  24 NOMONITORING;

  Table created.

  Scott@orcl12c > SELECT * FROM dept

  2.

  DEPTDESCR DEPT

  ---------- ----------

  10 SHOES

  CAMERA 30

  2 selected lines.

  Scott@orcl12c > CREATE TABLE DEPT_bad

  2       (

  3 the_whole_row VARCHAR2 (4000)

  (4) ORGANIZATION EXTERNAL

  5 (TYPE ORACLE_LOADER

  6 DEFAULT DIRECTORY BATCH_INBOX

  7 ACCESS SETTINGS

  8 (RECORDS DELIMITED BY "\r\n"

  9 NOLOGFILE

  10 FIELDS TERMINATED BY '\r\n '.

  11. THE MISSING FIELD VALUES ARE NULL

  12       (

  13 the_whole_row CHAR (4000)

  14       )

  15                       )

  16 RENTAL (BATCH_BAD:'UPS_DEPT_LOAD.) THE BAD ")"

  17         )

  RELEASE 18 UNLIMITED LIMIT

  19 NOPARALLEL

  20 NOMONITORING

  21.

  Table created.

  Scott@orcl12c > SELECT * FROM dept_bad

  2.

  THE_WHOLE_ROW

  --------------------------------------------------------------------------------

  20. ELECTRONICS

  1 selected line.

• In the external table files forming themselves!

  Hi all

  I am facing a weird situation.

  Few days back, DB has been improved to 11g 10g R2 and we are facing the situation of the training of logfiles, throw files have joined with external tables in the directory of the OS!

  Without job is calling them and the only procedure in which these paintings have been used in the SELECT statement, are not running, even while these files form themselves and fill space in the BONE.

  Here is the version information:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  "CORE 11.2.0.3.0 Production."

  AMT for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Please help in this regard.

  Thank you.

  Hi all

  Problem has been identified.

  11 g, dbms_stats.gather_stats_job runs all day until 22:00 and after every 4 hours on weekends.

  He also tried gathering statistics for external tables given through the GATHER_TABLE_STATS procedure.

  In the process, he joint/written in the log files.

  Now, I think of locking statistics from this table, so that no stats will be gathered for what is just an EXTERNAL table which is used/populated only once a month.

  Suggestions or comments?

  Thank you.