System Exec.vi displays strange errors

Similar Questions

• When I connect to a server that is not responding, Firefox displays an error message. It just hangs there.

  I had two incidents recently where FireFox will simply display a blank screen. In both cases when I tried the same website in Google Chrome, Chrome displays an error message which helped me to solve the problem. Firefox just sits there without understanding. I can't find a check in FireFox options box that says: "display system error messages. How can I do this? I prefer FireFox to Chrome, but if FireFox didn't tell me what the problem is, I can't use it. This problem has cost me more than a week in a recent update of the site.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls
  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

• Satellite T130-02F - display driver error

  Hello

  I just bought the Satellite T130-02F and after choosing 32-bit operating system, I had the power to recharge the battery and then started to get 'to display driver errors"where the screen black flash and then flash back on. I checked Device Manager and Driver Details, the reader is up to date and as far as I can see is the suitable driver. I searched websites to see if there are other drivers out there ar, but its update.

  I have nothing more have not installed on the computer again and find that I get the error more regularly on the farm rather than power, that concerns me. The computer is less than 24 hours old.
  Any advice?

  Mobile Intel (R) display firmware.
  Windows 7 32-bit is installed.

  Hello

  In your case I would try to reinstall the display driver. You can find the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, make sure that the latest version of the BIOS is installed. You can download the Toshiba site too.

  If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and should be checked for professional people.

  Welcome them

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Dialog control stamp kills system Exec.vi!

  Hello!

  I have just a really strange behavior in my application. I managed to narrow it down to a much smaller VI, please don't look at the framework, but the real problem, this test of the vi MAIN looks like this because it's a skeleton of an application more great (I had to remove a lot of relevant and confidential parts).

  So. I have a relay for monitoring USB from a 3rd party company that I use in my application via a supplied EXE perfectly. I call this exe in LabVIEW using the Exec.vi system and it works perfectly and watchdog functions as it should. However, I see a strange bug (?): if I run a browser control Time stamp dialog window, it "suspends" somehow the Exec.vi system. If my watchdog command stops setting, open relay, problem!

  I compressed my test application, and I can reproduce this same problem, although I have just called a BREAK to gain control of command line. Note that, in my real application, the control of time stamp is in another, said dynamically (call and forget the method) VI, but I get the same bug!

  Steps to reproduce the bug:

  1. launch my app
  2. observe that the iteration of the loop at the bottom
  3. Click browser control time to bring up the dialog window.
  4. You can see the background loop iteration has stopped (iterations of the loop DAQ)
  5. If you close the dialog box, the background loop continues execution

  What the heck is this?

  How this is possible, why there is "interference" between a completely separate control and a loop of low system Exec.vi?

  Thanks for any suggestions!

  I hide in my real application, as a solution, just the element browser control time stamp...

  LabVIEW is a software component called root loop which is used by different parts of the LV. opening dialogue blocks the loop of the root, which is probably what is blocking the DLL called inside the exec system VI. Probably, you will be able to do as opening a menu and leaving open.

  You can do a search for the term to learn more on this subject, but I don't think it's all you can really do about it.

• Cannot start the computer with DISPLAY of ERROR: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102,

  last time I connect, the NTFS has been runs a check and then close my computer with a SCREEN of ERROR and the COMMAND SCREEN CHECK BONES. All the time when I used the F8 key, it has not started safe mode and all. When I used F10 and F12... He made a QUICK and FULL TEST and said my hard drive 'PASS'... but no way to start the computer. The DISPLAY of ERROR says:

  --------

  Disable or uninstall an anti-virus, backup utility disk defragmentation. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  Stop: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102, 0 x)

  ------

  Help, please! as I have not set up disk or CHKDSK with me. granted access via another computer. My question is: can I download a service pack 3 or installation to start XP Professional, on a USB to do - turn off the anti-virus, backup utility, disk defragmentation?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Source: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/windows-xp-startup-error-stop-0x00000024/a15138c6-4be1-483d-b6db-e9d8db853d5b

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows update does not work and displays C80044E error code.

  Windows update does not work and displays C80044E error code.

  Hello

  I suggest you to try the steps below and check if it helps.

  View update history.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Let me know the description the updates that do not have the status.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists then try to set your computer in check and clean boot state, if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  More information: The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• KKKKK displays an error message with the graphics card during the installation

  My laptop is a DV6 6121tx with QB367PA #ACJ product number.

  During the installation of kkkkk, it displays an error saying not able to recognize the graphics card in the system.

  Please suggest an update secure for the soul if they are available.

  HP support assistant details of my graphics driver:

  Radeon (TM) HD 6770 M

  8.882.2.3000 (30/09/2011)

  Hi champakBhumia,

  Welcome to the HP forum!

  Here is a link to the HP Pavilion dv6-6121tx Entertainment Notebook PC specifications and HP Pavilion dv6 Notebook PC Maintenance and Service of Guide , which will provide a recommended list of replacements.

  I hope this helps.

• an error message is displayed "an error prevents a slide show to play."

  an error message is displayed "an error prevents a slide show to play."
  What does that mean?

  Hello

  Not sure, but more often means that there is a problem with a file system involved in the process. Try this:

  Click Start, type CMD. Right click on the entry that appears in the menu and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, type:

  sfc/scannow

  and click to start. Let it run until the end (it may take some time), and then close the command prompt by typing "exit" and by striking and restart the system normally. See if that helps. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• When try to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Original title: Activation of Windows 7

  Hello

  I have windows 7 Home premium dvd I bought from microsoft. When I tried to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Please help me with this.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 8DTXM - 6FQ2H-BKDY9
  The Windows Product Key hash: tyrxnn4SwD4/dXymV2RGA4cQPHY =
  Windows product ID: 00359-OEM-9801782-52192
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-BKDY900359-OEM-9801782-521928S-1-5-21-1079193163-3130481270-3640039680Dell Inc.. Vostro 3558 Dell Inc.. A01 20150209000000.000000 + 000E9BB3607018400FC04090409India Standard Time(GMT+05:30)03109

  Content Spsys.log: 0 x 80070002

  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  The following files are available for download from the Microsoft Download Center:

  For a 32-bit version of the Windows Installer update for Windows 7 for x 86 based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=150841

  or if you have a 64-bit version of Windows

  Install update for Windows 7 for x 64-based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=152411

  Source: http://support.microsoft.com/kb/971033

  Please, run again in normal mode and copy Microsoft Genuine Advantage diagnostic tool and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows 8 refreshment stops at 77% and then restarts and displays an error

  I can't update my Windows 8 Pro because when I do, it stops at 77% and then restarts and displays an error (there was a problem during the update of your PC)

  Hey Sajjad,

  I understand that you cannot update your computer Windows 8.

  1. did you of recent changes to the computer?
  2. Why are you trying to refresh Windows 8?
  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:
  
  I suggest to disable all external devices except the mouse and keyboard and try to refresh.

  Method 2:

  Use the check disk command for all errors on the hard drive.

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:
  a. press the Windows key + X, and then choose command prompt (Admin) on the shortcut menu.
  (b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
  c. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
  d. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  You can follow the links below for more information.

  How to restore, refresh or reset your PC:

  
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create the installation media for a PC refresh or reset:

  
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Refresh and reset your PC:

  
  http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspx

  Warning for update: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh your PC.

  Warning for the Reset: all your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.

  Hope the above information helps.

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Strange error messages just before the accidents of the body

  Latest updates to 2015 of the body
  10 64-bit Windows
  6-core I7 3.2
  980gtx 4 GB
  32 GB of ddr3 memory
  
  Recently I've been doing strange errors that cause the body to crash a lot. I have no idea what may cause the problem and I don't seem to have other programs just to the top and crash on me like body. I tried to update the drivers completely but that seemed only to make things worse but that might have been just a coincidence.
  
  When searching for error "Cannot allocate temporary data to reverse" nothing of use appears in google. Is there a database of adobe error message I should be through?
  

  The project I'm trying is large enough and had a few former premiere pro imported projects that could cause hiccups?

  Attached below are some of the error messages that popped up. Everything worked fine until the "low level" Adobe Player cause body crashing. After having reopened organization the following errors appeared "impossible to affect", "AE. MASK', 'contact of entry', and 'PPixHandle '.

  See you soon,.
  James

  

  

  Thanks for a detailed response.

  First of all, I suggest you create a new (empty) project and import your existing of the project leader (.prproj) using the media browser.

  As you work with a large number of data, how are your configuration of disks?

  This project is to use as much ram as I can give it. It is a hunger project. This could help boost errors. My system has 32 GB of ram, I allocated 6 GB for other programs / windows to use. I used to have only 4 GB allocated for windows but that was causing errors of memory that windows needed more runs while this project was open

  I would say that allocate more memory (8-10 concerts IMO) windows to avoid bottlenecks because other processes are equally important.

  Is usually a specific cause for the error messages I posted in the original post to protest or they are generic error messages?

  These errors are mostly generic.

  Thank you

  Regalo

• Migrate from my Mac to a new, creative cloud displays an error, installation failed

  After the migration of all data from my old Mac to a new. Any transfer of data was successful, but the creative cloud displays an error:

  

  After downloading and trying to install here I get the following error:

  

  What do I need to do?

  Thanks for your help.

  You may need to modify the format.to file system support as Mac OS extended file system [logged]).

  Or try to install root user account.

  Let me know if you need steps.

  However, it is best to check with Apple Support once.

  Just for confirmation, contact Apple support immediately and confirm

  Contact Apple - Apple Support support

  For example:

  

• Strange error with RHCL RH10 and RH11 command-line compilation

  Hello once again, RoboHelp gurus!

  I feel a strange error using the compilation process command-line rchl in RoboHelp 10 and 11 of RoboHelp.

  Here is the command I use:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl "C:\folder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\log\folder\logfile.txt".

  When I generate the log of the cmd file, I see an error "LILo: BIBCientInit could not initialize" twice in the window of cmd prompt while compiling is the treatment.  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl "C:\projectfolder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\logfolder\logfile.txt" [press ENTER]
  

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML >

  
  

  The created FichierJournal.txt has no mention of ""LILo: BIBCientInit could not initialize "it contains."  Compiling builds without problem, as far as I can tell.

  
  

  The same thing happens when I do not create the log during the cmd file and it errors record right "compensation output folder.  But, it seems to me that the output folder does not actually get disabled.

  
  

  This allows the viewing of the compilation process line by line in the cmd prompt window.  When the compiler indicates "output Compensation folder...". ', the ' LILo: BIBCientInit failed to initialize "error message appears twice, and then the process continues.

  Here's the command:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl 'C:\folder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder '.

  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl 'C:\projectfolder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder"[press ENTER]

  Adobe (R) RoboHelp version 10.0.0.287 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: C:\folder\project.xpj

  Page layout: SSL_Name.

  Output: c:\outputfolder.

  Scanning for the compilation project...

  Review completed.

  ATTENTION: No luggage description of the file.

  From compilation...

  HTMLHELP 10.0.0.287 preprocessor

  Compilation C:\folder\! chm_tmp_folder_0\project.xpj ...

  Preparation create HTMLHELP...

  Compensation output folder...

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  Preparation of the HTML Help files...

  Copying files...

  ...

  It's okay if it's a HTMLHelp or WebHelp output.  Any thoughts on what is this error and what is the cause?

  I've been away from RoboHelp for about 9 months, but I'll be back on the same projects and the same version of RoboHelp 10 and the same compilation process.  The difference is that I have a new laptop.

  Thank you very much in advance for your time!

  EA

  Adobe was able to recreate this issue on their end, and a bug was created for her.