System has Windows time automatically brought date to 12.01. M, Jan 2001 at every start.

Similar Questions

• Window: The system has recovered from a serious error - how to fix this?

  The system has recovered from a serious error - continues to appear on my screen when I start.

  Error reports

  C:\DOCUME~1\Owner\Locals~1\Temp\WER4b86.dir00\Mini07291-01.dmp

  C:\DOCUME~1\Owner\Locals~1\Temp\WER4b86.dir00\sysdata. XML

  BCCode: 100000d 1 BCP1: 443230B 3 BCP2: 00000002 BCP3: 00000000 BCP4: F8568256 OSVer: _1_2600 SP: 3_0 product: 768_1

  What is happening and how to fix this?

  Take a look at your event viewer for more information. To access it, go to start, run, type msconfig and press ENTER.

  A new dialog box will appear. Click the Tools tab and find the event viewer.

• How can I find the System Properties window in Vista?

  I need to change a setting in the System Properties window in Vista. I can't find such a thing.

  I need to change a setting in the System Properties window in Vista. I can't find such a thing.

  Start > computer > toolbar, System Properties > are your options on the left column.

  If you don't, tell us which application are you looking.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but every time I open a fil

  My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?

  Hello

  Acrobat 7 is not supported and an older version of Acrobat.

  Also, it is not compatible with Windows 7.

  This could be the reason why you are faced with it.

  Please see this link.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Concerning

  Sukrit diallo

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• System has two processors, but windows detects one.

  Hello

  I have a HP Pavilion p6-2100.  The windows Device Manager is displayed two processor but when when I type systeminfo.exe to command prompt its only showing a.  Something misconfigured?

  C:\Windows\System32>SystemInfo.exe

  Host name:
  Name of the operating system: Microsoft Windows 8.1 Pro with Media Center
  OS version: 6.3.9600 n/a build 9600
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Registered owner:
  Registered organization:
  Product ID: 00261-70000-00000-AA439
  Original installation date: 10/09/2014, 19:18:09
  Starting system: 24/09/2014, 15:47:53
  Manufacturer: Hewlett-Packard
  System model: p6-2100
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: AMD64 family 18 model 1 Stepping 0 AuthenticAMD
  ~ 2800 Mhz
  BIOS version: FRIEND 7.15, 16/12/2011
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume2
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-05:00) Eastern (U.S. & Canada)
  Total physical memory: 7 155 MB
  Available physical memory: 5 307 MB
  Virtual memory: Max size: 14 323 MB
  Virtual memory: available: 12 356 MB
  Virtual memory: in use: 1 967 MB
  Office (s) swap file: C:\pagefile.sys
  Domain: workgroup
  Logon server: \\MicrosoftAccount
  Corrections: 65 fixes installed.
  Network adapters: 3 interconnect installed.
  [01]: Realtek PCIe GBE Family Controller
  Login name: Ethernet
  DHCP enabled: Yes
  DHCP server: 192.XXX. X.X

  IP addresses
  [01]: 192.XXX. X.X
  [02]: fe88::2012:858 d: 9b3e:6bd9
  [02]: 802.11n wireless LAN Card
  Name of the connection: Wi - Fi
  Status: Media disconnected
  [03]: V9 adapter FAUCET-Windows
  Name of the connection: connection to the Local network
  Status: Media disconnected
  Requirements for Hyper-V: VM Monitor Mode Extensions: Yes
  Virtualization enabled in Firmware: No.
  Second floor address translation: Yes
  Data Execution Prevention available: Yes

  C:\Windows\System32 >

  

  Hello

  No, it has only ONE such processor stated on his page

  HP Pavilion p6-2100 Desktop product specifications

  A single processor but TWO cores (or dual-core)

  Kind regards.

• My Windows 7 operating system has just decided he wasn't more "authentic." I thought I fixed it, but he came back. I have to do a system repair/restore/etc?

  My Windows 7 operating system has just decided he wasn't more "authentic." I thought I fixed it, but he came back. I have to do a system repair/restore/etc?  Should I still worry about this or the police will come knocking at my door?

  Looks like you used a disc at retail to install with the OEM SLP key. An OEM SLP key works with your media recovery of manufacturers. (an OEM SLP key can be activated by normal means).

  the simple solution is to change your product key to the one on your COA.
  EDIT: Oops. must have been click Start, type slui 3, press on enter

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• The adjustable BB10 Simulator it is date and time automatically?

  I have the installer of BB10 Simulator (10_2_1_2234) and works generally well on my Mac OSX (10.9.2 Maverics) system using VMWare Fusion 6.0.2 (1398658).  Everthing is in the latest versions as far as I can tell.

  However, even if in the settings / Date and time, the "Set Date and time automatically" switch to "On", whenever I start it, it displays the last time I used it.

  I need to manually enter settings / Date and time, turn the "Set Date and time" automatically to 'Off', set the date and time manually, then I turn the "Set Date and time automatically" button return to 'On '.

  My application itself is able to send and receive data over the network.  I can use the "Browser" application to see the web sites.

  How can I do set the date and time automatically?  Y at - it VMWare Fusion setting, I need to change?

  Thank you

  Ed Federmeyer

  If you resume your virtual machine session, the time that the virtual machine has been suspended is used.  If you "Power Off" the simulator it will update it's time to start.

• Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

  tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

  Original title: usb malfunction

  His salvation,

  Thanks for posting your query in Microsoft Community Forum.

  1. What are the troubleshooting steps you have tried so far?
  2. If it works much earlier? If so, did you do changes on the computer before this problem?
  3. What type of USB device you are using?

  As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

  Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• your system has not been modified when installing itunes in my window 10

  your system has not been modified during installation the itunes in my window 10... How to solve

  A step to the solution is to view in iTunes for Windows forum instead of iTunes for Mac.   I would ask that is re - find.

• Got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted

  I've recently updated to WINDOWS XP Pro SP3.  Thursday morning, when I tried to boot my pc, I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted.  I've ever seen at the windows startup screen.  What can I do?

  * original title - I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted. What can I do? *

  System 32 system config is missing or currupt

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?

  My computer has Windows Vista Home Premium 64 - bit operating system.  When I try to get updates, there is an Error Message Code 8000 ffff.  How fix/resolve this problem?

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
  http://support.Microsoft.com/kb/946414

  How to reset the Windows Update components?
  [Launch the difficulty mode by default and aggressive , if necessary]
  http://support.Microsoft.com/kb/971058
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck