System update updates microsoft windows

Similar Questions

• Page updated Microsoft Windows suddenly does not display, start about a week ago! Why?

  All of a sudden about a Week Ago, I was no longer able to view the page manually, between them two times, have your analysis of Microsoft Windows Update

  my system updates, because all I see is a screen white, white - no links, text or graphics are visible! ... I closed the browser IE, deleted

  Temporary files and tried again, but even that did not help! ... What is happening, and how do I fix...?

  Hello

   
  Have you made changes on the computer before this problem?
   
  Follow these methods mentioned below and check if that helps.
  Method 1: You receive a script error or a blank page when you visit the Windows Update Web site or the Microsoft Update Web site
  http://support.Microsoft.com/kb/836948
   
   
  Method 2: Optimize Internet Explorer and check to see if that helps...
  http://support.Microsoft.com/kb/936213/he
  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Impossible to update Microsoft Windows Vista SP2

  I have a laptop that is running Windows Vista Service Pack 2 from Microsoft yet. I have not started the laptop for almost a year and I understand that the operating system is no longer supported. I'm just trying to get all the other updates carried forward after November 13, 2015. The update of Windows seems not to be able to get updates or is suspended. In the past when Windows XP support ended, I was still able to update the o/s to the last update available for the well type beyond a year after. I don't see why I can't still not updated for Windows Vista SP2.

  I need constructive responses to solve the problem and not the usual, "my computer is old and needs to be upgraded or replaced", remarks. I don't have the funds to keep the upgrade for the latest and best. The laptop, I always work and if I have funds or if I know that it can smoothly run Windows 10, I could upgrade the o/s.

  Follow these steps: Install KB3078601, KB3109094, KB3145739, KB3164033, KB3168965 and KB3185911 manually. Download links:

  http://Wu.krelay.de/en/

  The value "never search for updates' automatic updates and reboot before installation manual. The updates themselves can be installed in a line without having to restart in the meantime.

  Best regards, VZ

• How to stop notification of update Microsoft Windows 10 «»

  Windows 7 update continues, trying to turn my operating system stable full of Windows 7 in an unstable 'Windows 10 TROJAN HORSE' is possible to tell Windows Update to stop this BAD behavior or do I have to go out and buy some old diskettes installation of "Windows XP"!

  If you don't want Windows 10, there are different ways to stop it:

  1. http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

  or

  2. how to manage Windows 10 notification and update options
  https://support.Microsoft.com/en-us/KB/3080351

• Essential system for the Microsoft Windows Vista Service Pack 1 (SP1) updates

  Hi, I want to know if it is applicable to sp2 as well. I don't know why there is not one for sp2. I have an hpg60 laptop and it does not appear on the page drivers.

  It's just an accumulation of the Vista updates. All are included in SP2, so you can forget about it. Simply apply SP2 (as you have done) and start a full MS update and you'll be fine.

• Cannot use the system update with WIndows 7 SP 1 for UN-installing IE11 - impossible to re - install IE11!

  I have the day together system prompt before downloading and installing. When I had the time of who is running the last invite nothing would install and ' check for updates ' stopped working. The two move to a phase of 'work' but is not progressing.

  Search through this forum, I came to management may be incorrect which previously uninstall IE 11 must be the origin of the problem (System Troubleshooting update does not provide a solution) but when I download and try to re - install manually, it says that IE 11 cannot be installed as a more up-to-date version is already installed.

  He's not... Although a folder "internet explore" is always present; the ieinstal.exe is non-responsive (even when run as administrator) and I can't delete the folder because:

  "You need permission from TrustedInstaller to make changes to this file.

  I don't have a point system before uninstalling IE 11 of restoration and we tried disabling my AV during execution of update of the system, for the moment I'll have to find and manually install the security updates, which is a tedious exercise.

  Someone has encountered this problem, and more importantly have a solution?

  My apologies if I missed the answer elsewhere and thank you in advance for any help.

  IE is not uninstalled or reinstalled unless you have a version of Windows N/K/KN, these have been sold in Europe and Korea.  It is a component of Windows Basic.

  Check your edition of Windows in the Control Panel, System.  There K/N/KN after the name of the [Home premium etc] edition?

  If this is not the case then you have a standard version and you can unload or reload IE to

  Control Panel,

  View by - small icons

  Programs & features,

  Turn on or off Windows features

  Set / uncheck the box next to Internet Explore [for reload / unload],.

  Ok

  Ok

  It will make you then restart the computer for the change to take effect.

  How did you "Uninstall" IE?  It is possible that this Act has damaged the system.

  Denis

• Unauthorized changes were made for Windows: download crippling update Microsoft Windows Defender

  I read to post my report MGADiag here.  What he does? Is someone from Microsoft will sent me the equivalent antiparticle of this unauthorized change message and restore my computer to function?

  My computer is (was, now it's a door stop), a Dell Vostro 1500, with a Vista Home Basic, Version 6 operating system. It has an Intel Core 2 Duo processor.
  Reset on my computer now says it does not work. So, it's not a solution. I tried to scan/remove this "message", but since it seems that they have generated by Microsoft, security is not recognize it as a virus, (too bad). Reset did not help either.  I now work in Safe Mode, I ran the diagnostic and repair of this window with no change in the problem. I have discs with what seems to be my Vista OS and Drivers, so if Microsoft does not respond to the report of the Forum. I intend to throw out and replace my operating system. But, Hey! This date of security worth it.  A non-functional computer is about as safe as it can get, (laughs).

  Diagnostic report (1.9.0027.0):
  ------------------------------

  Double post.

• x 230 problem with config/system updates of windows

  I have a new x 230. Windows updates will not be installed as the last week - and they try to reconfigure the computer it does not work. This happens now whenever I start. Y at - it a solution or a fix?

  
  

• System refresh actualisations Microsoft Windows Firewall software with advanced opions not found

  Good evening

  When I ask the firewall with advanced fire windows I get the following response: failed to load the snap-snap-in windows firewall with advanced security code error 0xd9 options.

  Thanks for your insights.

  Best regards

  Guy PASCAL

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  http://support.Microsoft.com/common/international.aspx

• WANT TO UPDATE MICROSOFT - MET PROB - WINDOW CAN NOT DISPLAY THE PAGE, I'M LOOKING FOR--

  Update microsoft window-

  PorB met

  cannot display the p

  age, I'm looking

  http 404 error

  Hello

  1. are you referring to Windows Update?

  2. what version of Internet Explorer is installed on your computer?

  The Web page is not found (HTTP 404 error) If you are using Internet Explorer, this error message is due to if Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Note: If you are unable to access Windows update Web page, then I suggest you try the following steps.

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer.

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  § https://*.microsoft.com

  § https://download.windowsupdate.com

  § https://update.microsoft.com/windowsupdate

  § http://*.update.microsoft.com

  § https://*.update.microsoft.com

  § http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  Note: For "Internet Explorer cannot display the webpage" error I suggest you refer to the steps in the following Microsoft article.

  Internet Explorer cannot display this webpage: http://support.microsoft.com/kb/956196

  Notes:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Clean boot Once you have completed troubleshooting, re-enable all services to reset the computer as usual.

  System Restore When you restore the system to a previous state, any programs or updates that have been installed since that date will be removed.

  Keep us updated on the status of the issue.

• A security update for Windows Vista for failure of the 32 x-based systems (KB2585542) installation code 8024200d

  I tried to do the automatic update of the KB2585542 on my PC which runs on Vista 32 bit.  Whenever I try to install it, I get one above mentioned the error code.  I ran an anti-virus, anti-malware & a reg clean and then tried to install it but I still get this error.

  Hello

  You are able to install all other updates of Windows without any problems?

  Follow these methods.

  Method 1: If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.  After you run the analysis tool, try to install the update.

  You can download & run the system update readiness tool and check.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Method 2:  If this does not help, you can temporarily disable antivirus software, and then try to install the update.
  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  

  Method 3:  If the methods above do not help, you can place the computer in a clean boot state, and then try to install the update.  Follow these steps.

  Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, place the computer back to normal following KB article.

  Step 2: Now, try to install the update manually.
  You can go to http://www.microsoft.com/download and use the number of the update to download and install it.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Automatic update for Windows Mail Junk E-mail Filter for x 64 systems [November 2011] (KB905866) Installation status: failed.

  My Windows is set for automatic updates, I am running Vista SP2.
  Update for Windows Mail Junk e-mail filter for x 64 systems [November 2011] (KB905866) didn't load a number of times.
  He gave details of the error: Code 800736 B 3.
  Downloaded and run MicrosoftFixit, it is said that it is fixed.
  I went into Windows Update and tried downloading it twice, but it does not always load.
  It does not appear to slow the computer down while it tries to download.

  Hi Alex-862,

  1. you have made no changes to the computer before the broadcast took place?
  2 are you able to install all other updates?
  3. do you have the 64-Bit Windows Vista installed on the computer?

  Method 1
  I would say allows you to clean start, then download and install the update from the Download Center.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Update for Windows Mail Junk e-mail filter for x 64 systems [November 2011] (KB905866)
  http://www.Microsoft.com/download/en/details.aspx?ID=20999

  Method 2
  Try the steps from the following link:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• System Update Readiness Tool Vista installation error - error: "the parameter is incorrect."

  I have a virtual machine running Vista. I need to update with the SP1 and SP2 for Vista and the VS SP1.

  I have downloaded and saved the 3, but when I tried to install SP1 for Vista I got an error that says I need to run the Vista system update tool. I downloaded the analysis tool, but when I tried to install it on the virtual machine is a mistake here:

  "The parameter is incorrect."

  There was no error number.

  [It is ironic to get an error during the installation of software that is supposed to fix the errors of installation...]

  What should I do now?

  Hi MeProgrammer,

  Temporarily disable the antivirus software on the computer as a test and try to install the update and check if this is useful to fix the problem.

  If disabling the antivirus software works, then you need to configure the same so that it does not disturb. Please contact the software vendor for assistance in this regard.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Additionally, make sure that you download and install the correct version (32-bit or 64-bit) system from the link below for Windows Vista Update Readiness Tool:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  In addition, I recommend you check the following logs for more information:

  %SystemRoot%\Logs\CBS\CheckSUR.log
  %SystemRoot%\Logs\CBS\CheckSUR.persist.log

  I hope this helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Vista Home Edition: Cannot check/install updates to Windows error code: 8007005

  I recently had problems with Windows Update to update correctly.
  The error code I get when I tried is: 8007005

  Please help!

  Hello

  It is a very difficult to solve. What are the items in the KB if it has shown that the installation of not?

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  Those are kind of prerequisites and probably will not solve the problem.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on
  Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  Its usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error code 800F081F while trying to install the update to windows security

  I have to install updates in order to renew my soft security on my laptop but whenever I try to install the updates to windows, I get an error code. It's 800F081F and I can't understand what this means or what I need to do to correct the problem. If anyone can help me, I would really appreciate it!

  Thank you!

  source CBS_E_SOURCE_MISSING 0x800f081F for unsuccessful package or file not found, ResolveSource()

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  http://www.WinHelp.us/index.php/Windows/enhancing-Windows-performance/free-up-disk-space-in-Windows.html>

  Better and easier to use - CCleaner.

  Download the basic build (slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821>

  If the system update tool does not resolve the problem, you will need repair Windows.

  UTC/GMT is 15:34 Wednesday, June 13, 2012