Cannot use the system update with WIndows 7 SP 1 for UN-installing IE11 - impossible to re - install IE11!

Similar Questions

• Cannot use the Bluetooth Dongle with Windows 7

  Hello

  I recently bought a Bluetooth USB Dongle (Esperanza BLUETOOTH v2.1. EA101) (not a best buy, but defiantly a cheep one).

  I can confirm that it is 100% functional and working. As I tested it on the other PC with Windows 7 (x 64) and my Linux machine.

  I can't put it up to work with my PC at home.
  I have goggled. Found that my Bluetooth support Service has been leaning and I started it and set to start automatically rebooted computer and plugging the unit.

  Plug-and-Play installation Bluetooth CSR chip driver. (even can be downloaded from the manufacturing site).

  I'm still not able to use the device. When I enter the Bluetooth settings if I make changes it says that my camera is unplugged.

  While on the other PC I tried to plug and play also installed/implementation following things that were not installed on my PC at home:

  (Heading RFCOMM Protocol TDI) Bluetooth device

  Microsoft Bluetooth enumerator

  Device Bluetooth (personal area network)

  The advice I am missing sth?

  I can provide any other details necessary to demand

  Hello

  Method rather than the above helped.

  After trying them I managed to solve the problem in an invasive way more.

  The solution that worked:

  I have re installed my Windows, updated with all Windows updates and installed the latest drivers.

  (My previous instance of Windows 7 was updated with updates and drivers)
  After that, I started Bluetooth Support Service and set it to automatic. Restart the PC, plug in the device and ALL the drivers installed automatically (including the)

  (Protocol RFCOMM TDI) Bluetooth device.

  Microsoft Bluetooth enumerator,

  Bluetooth (personal area network) device)

  Thanks for your comments

• Cannot use the Exteranl USB with Windows 7 floppy drive

  I have a removable disk drive 3.5 inch USB connected to my computer running Windows 7.  When I plugged it there was the usual beep that had plugged in an external drive and only came a message that the drivers were installed correctly and the drive is ready for use.  However:

  a. the player is not visible in Explorer, but appears in the Disk Manager and control panel (material & sound-devices and printers).  It "works" according to Disk Manager.

  b. when I insert a floppy disk, nothing does not appear in the Explorer

  c. I tried without success drive letter assignment (miss me something here, I think and need for a better prescription to follow)

  I saw a post elsewhere on the "group policy objectives" but got lost in the talk of technology and could not get something resembling the description in the post.

  Suggestions, please, which will help to get the job of the thing.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you can not use the floppy drive external USB on your Windows 7 computer.

  I would be grateful if you could help me with more information to better understand the problem and a solution:

  1. have you tried another USB port using the USB floppy? If this isn't the case, I suggest you try to use it in another port.

  2 have you tried to use the USB port on a different computer/machine? If not, try to use it in another computer.

  This problem can occur because of incorrect settings. In order to solve the problem, I would suggest trying the following methods and check if this is useful:

  Method 1 : Troubleshooting hardware and peripheral

  Integrated the hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause problems with the equipment. I suggest you run the troubleshooter to check if there is no problem with the graphics card. See albums as follows:

  1. open Control Panel

  2. click Troubleshooting and select the option to display all on the left pane.

  3. click Troubleshooting of hardware and devices and follow the prompts.

  Try Method 2, if the problem persists

  Method 2 : Install the drivers in Compatibility Mode

  I suggest that you try to download the drivers from floppy drive designed for Windows XP or Vista and then install it in compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Cannot use the NOR-IMAQdx with 3 USB camera driver

  I have a system WIN7 64-bit I would use with two USB 3 Vision cameras (both are 24UJ003 from The Imaging Source DFK), which works very well with the software IC software. The camera can be opened with IC software but will be visible only with a cadence of 1fps, any size I put it.

  I can open them able and Automation Explorer, but they do not appear under NOR-IMAQdx in the tree.  When I click on the software in MAX tree below, NOR-IMAQdx revealed as being installed (14.5). The camera (and OR) instructions say change the camera driver to that found in C:\Program NIUninstaller Instruments\NI - IMAQdx\Staging\NI USB3 Vision, but my driver is located in C:\Program Files (x 86) \National Instruments\NI - IMAQdx\Staging\NI USB3 Vision.

  Attempts to install the driver displays the following message is displayed:

  "The folder you specified contains a compatible software driver for your device.  If the folder contains a driver, make sure that it is designed to work with Windows for x 64 systems".

  This makes it sound like the driver is in the wrong place or it does not for a 64 bit OS.  Any advice on how to switch them TIS drivers to drivers OR-IMAQdx and also how increase the pace of the second camera would be very much appreciated.

  I tried to connect the cameras individually, and they both have the same performance as when they are connected together (we have good pace, and the other has only 1 fps).

  Are you sure that the camera is Vision compatible USB3? Nothing that I do not see in the marketing material says it is compatible. Is it possible you need a firmware update to make it compatible?

  The installer put IMAQdx driver in the space provided for an x 64 system and he always puts the number of correct bits of the driver down to the system that you have installed. My hunch is that the camera is not to expose a USB3 Vision interface for the driver to bind.

• Cannot perform the automatic update of Windows via IE

  After the new installation of Windows XP Pro, Windows Update site reports "the website has encountered a problem and cannot display the page you are trying to display" trying to Express/custom install. Tried restarting, cleaning cookies, but nothing works.

  Thank you

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  http://support.Microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
  http://support.Microsoft.com/kb/958053

  Error message when you try to install updates from the Windows Update Web site on a Windows XP-based computer: "Windows Update has encountered an error and cannot display the requested page.
  http://support.Microsoft.com/kb/914226
  Windows Update has encountered an error and cannot display the requested page.
  In addition, you see "[error number: 0x8024D00C]" in the upper right corner of the Web page.

• Cannot activate the 3rd computer with Windows 7 Family pack

  I have three computers and all were running licensed copied of Vista. I bought the "Family Pack" upgrade to Windows 7. I have implemented customized installs on all machines - no problem. Activate the first two online perfectly. The third party will not activate so I used the method of the phone. The automated waiting requires the 9 key series of 6 figures and said so I have to answer the questions. The first question is "how many computers have you installed this license on? The answers will take you to a report that says: "we're sorry, but you do not meet the requirements of this license." I am invited to stay online to get help and the system is then said "we cannot help you at this time, please call back."

  I tried 12 times over a period of three days - all times of day and night. Same result. I don't know of any way around that. I know that I have 30 days to activate, but I don't want to wait.

  Any ideas?

  Thank you.

  Greg

  Try to say 2 when asked how many computers have you installed license on.  Maybe it's that this license is not installed until after you enable.  Just a thought.

  Stu

• Cannot open the automatic updates on windows xp 800704424 error page

  Unable to open error 80070424 automatic updates page

  Hi Annraftery,

   

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems that you are unable to run automatic updates with error code 80070424.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  I suggest you follow the steps in the link below and check off the question:

   

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall:

  http://support.Microsoft.com/kb/968002

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Cannot use the files copied from Windows 8/7/Vista in windows XP.

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  How is the "pen drive" formatted - with what the specific OS file system?
   
  This is more likely to be a file system - do not operating system (although related, not as much as you might think)-problem.  Another possibility is a problem hardware or bad driver on the machine Windows XP itself.  It could also be, although rare, an incompatible 'USB key '.
   
  What is the 'pen drive' is formatted with the file system is essentially - the first question to ask.  Then - if I were you - I everything on the 'pen drive' copy on a computer which can be read - if committed to the machine more common denominator (in this case the Windows XP machine) you will use and FORMAT this 'pen drive' using this machine.  One of the few possible things will happen no doubt...

  (1) you'll find you format it with a version of NTFS that will work in all areas - all the machines that you can use with Windows XP or more on them.  Then this problem will disappear.

  (2) you will find there * is * something wrong with the Windows XP specific in question and this machine is not a problem easily solved this and your "pen drive" probably will work on someone elses machine Windows XP very well as it existed before.

  (3) you will end up with a FAT32 formatted "pen drive" that should work on most any system - as long as you don't need to transfer * really * large individual files.

• Cannot use the system restore

  When I tried to do a restore of the system after a software installation failed I got the message "system restore is disabled. You want to turn on? "I clicked the Yes button and then got a screen display that she couldn't be turned on because"system restore has been disabled by group policy. When I searched for how to change group policy, they told me to go to start, run and type gpedit.msc. When I tried that I got an error that gpedit.msc does not exist on my machine. Can someone tell me please how to restore the system restore. I am running an old Vaio with XP, but it still works very well this problem.

  Also, I tried it while logged in as an administrator, it is not part of the problem. I do not have a system restore disk because it did not come with the machine and I forgot to make one, but I have a disk of Windows XP with Service Pack 2. Do I have to re - format the entire disk to fix this? I use a sturdy old Sony Vaio, which works very well except for this problem. Any advice would be appreciated.

  How did you delete the system restore?

  I think you have bad things on your computer (or you did at some point).

  If you have XP Home Edition, you have no Group Policy Editor (gpedit.msc), but the error message that you declare (if it's like my examples), indicates that group policy has been changed, so that something has changed.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Perhaps GoBack is it for you to prevent you from using SR then you would be forced to use use GoBack instead and I do not wish to install GoBack to find out.

  Malware "break" things that he knows that you will use to try to get rid of it... like the Task Manager, the restoration of the system, the registry editor, etc.

  The malware is happiest when she can trick you into thinking you need to do a repair installation, use a Restore Point or even a complete reinstall when none of those things are needed that outsmart you, and then got rid of with MBAM and SAS.

  AV tools will not often catch these things because they can not tell if policies have been disabled by malware or if you made on purpose, so just leave them.   MBAM will point out a few of them as suspect and give you the opportunity to correct them if you wish.

  The malware may also know you have XP Home and adjust policies that he thinks that you do not have to be set because you have no Group Policy Editor - This is how he thinks and that's what he does.  He wants that reinstall you XP from scratch.

  First run MBAM and SAS if you want.

  I've done to the top of this edition of registry for you :).  It's an accumulation of things that responds to all things under the sentence "If you see things like...". ».

  If you just want to see if you can get your work of SR and are comfortable editing the registry, you can go here:

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\SystemRestore

  Find and delete this registry key:

  DisableSR

  That's what this line in the file .reg on top:

  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.

  He "skins" (removes) politics DisableSR.

  That will solve your problem of immediate SR, but will not any question that you have not yet set.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  But, as I said, if you have in your registry, you have probably other things too.  My regedit will fix all the things I've seen come with the question SR whether or not they have need of fixing.  It does nothing, it will remove anything that might be there (you have at least one).

  Then, you should broaden your horizons AV because what you use dropped and could not protect your system.

  Or, you can wait and see what other people have to say.

• 'Lost' admin user account - cannot use the system restore

  We have an old desktop running XP Media. At 6 accounts on - account admin 1 parent, 4 other named accts (non admin) and 1 guest (non admin)

  The system is somehow now starts only showing 1 user account - non-admin one child one.  In management of the computer (administrative tools), accounts are but are not accessible.

  Have no idea how to access / info. Unable to use System Restore as one account stated is a non-admin one.

  Can someone help, please? -have been Googling for a few hours now :(

  As a last resort, you can try the following procedure:

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  Which essentially restores the registry from a backup copy kept with the files in system restore.  In part 2, select a dated folder until you have had this problem to copy the registry of the.  Personally, I find it is easier to start from free Linux Livecd like Knoppix , in which case you can start the procedure in part 2, step 6 using Linux and paste to copy files to their desired location.  Live CD of Linux has no problems with dealing with the status of "Super hidden" System Volume Information folder.

  Good luck and HTH,
  JW

• Cannot access the system files with permissions to access EFS and certificate are set correctly.

  I am running EFS on a secondary internal hard drive on my computer Vista Enterprise SP1.  I have been using EFS for a few months with no problems.  Recently, when you try to access a number of files, I started getting access denied errors.  I'm still under the same certificate with same file permissions that I was when I originally encrypted the files.  Curiously, I can move, delete and rename files without problem, but I can not access, copy, or decrypt.  I tried reseting the file permissions, nothing done.  An excerpt from the command line:

  D:\>ICACLS FILE name. MOV

  NAME OF FILE. MOV : (F)

  BUILTIN\Administrators: (I) (F)

  NT AUTHORITY\SYSTEM: (I) (F)

  NT AUTHORITY\Authenticated Users: (I) (M)

  Builtin\Users: (I) (RX)

  Processed 1 files successfully; Treatment failure 0 files

  D:\>cipher/y

  Thumbprint for computer certificates EFS ComputerName:

  D:\>cipher/c FILENAME. MOV

  List D:\

  New files added to this directory will not be encrypted.

  E FILE NAME. MOV

  Users who can decrypt:

  Thumbprint of the certificate:

  No recovery agent.

  Important information:

  Algorithm: AES

  Key length: 256

  Entropy key: 256

  D:\>cipher/d FILENAME. MOV

  Decryption of files in D:\

  NAME OF FILE. MOV [ERR]

  NAME OF FILE. MOV: Access denied.

  0 file (s) [or directorie (s)] in 1 directorie (s) have been deciphered.

  D:\ >

  The only thought I have is that maybe the metadata associated with the EFS file is damaged?  I'm open to any new idea to access my files.  Thank you in advance.

  Hi Dekaner,

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum Technet Windows Vista security permissions and. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem using the serial port with windows 7

  Hello

  I have a modem of SIM cards (used to update remote controller of the electronic gate) that connects to my computer via the serieal port (COM1).

  The modem comes with its own piece of software that worked fine on my old computer with windows 7 (I had a similar problem, but then I just need to update the driver).

  I now have a new computer and I am unable to connect using the modem (I think I'm using the latest drivers for the serial port).

  Is it possible that I need an older version? If so, how can I get a?

  My motherboard is a GIGABYTE H81M-D2V.

  Any ideas?

  Thank you

  AVI

  Hi Avi,

  Thank you for the update on the issue.

  The UART, or Universal Asynchronous Receiver / Transmitter, is a characteristic of your microcontroller useful to connect serial data (text, numbers, etc.) to your PC. The unit switches incoming parallel information (in the microcontroller/PC) to series data that can be sent over a communication line.

  According to the description you provided it seems that your modem isn't connecting with your Windows 7 computer, then I would contact Duetech Berès your modem manufacturer, so that they provide you with the steps to set it up.

  Get back to us after contacting them and please get back to us with your question was last updated.

  Kind regards.

• Cannot use the 'MDGS' command in Windows 7

  original title: need help with a Comand prompt

  Hi, I need help with a problem in the command prompt. Whenever I try to use the "msg" command, it displays an error indicating it is unavailable this command has been changed?

  MSG is not a command that is available in Windows 7.  You can get a list of available commands by typing help at the command line, or

  help > C:\Users\YourUserName\Desktop\Windows7DOSCommands.txt

  to put the list in a text file on your desktop

• Cannot download the security updates in windows xp

  Windows XP issue - I have several times notice that security updates are available, but after going through the movements SEVERAL times, always the message automatic updates that "some updates could not be installed".  All seem to be updated for security and there is a list of about 5 or 6 of them.  Frustrated...

  Hi RoseRosey,

  ·         Provide updates failed number of KB.

  ·         What is the error message you received the update failed?

  Follow the suggestions below for a possible solution:

  Step 1: To get the error message code or error of update failed, you can check the update history in sight. Follow the steps below:

  a. click Start, in the search box, type in Update

  b. click on windows Update

  c. click view update history

  d. If a double failure click the update has failed to get the error code and error message.

  Step 2: Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the KB number below:

  http://www.Microsoft.com/downloads and check if the problem is resolved.

  Hope this information helps.

• Cannot use the quick start of Windows 8

  Given that I have install a new SSD, I can't start my windows to activate the quick start mode, when I close it, then windows running perfectly.

  Blue screen appears while the quick start mode, seek help.
  

  I have check ram and chkdsk, there are no bad sectors, HELP!

  Hi Choy,

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you with this problem.

  To better understand the issue, I would like to know what is the brand and model of the computer?

  This problem might have occurred because of these reasons:
  1 conflict between third-party applications or equipment.

  2. bad power settings.

  Try the steps listed here:

  Method 1:

  I suggest you to remove all external devices except the keyboard and mouse. Now set up your computer in a clean boot state, and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest to create a new power plan and customize the same function of your needs. Check if it helps.
   
  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.